the computar say me
fatal server error:
could not open default font 'fixed'...
Please helpme....
Thanks...
[EMAIL PROTECTED] writes:
Send Newbie mailing list submissions to
[EMAIL PROTECTED]
To subscribe or unsubscribe via the World Wide Web, visit
http://XFree86.Org/mailman/listinfo/newbie
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Newbie digest..."
Today's Topics:
1. Re: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode (Lionel Lecoq)
2. R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode (Diego Cardinali)
3. Ati Radeon 9000 Pro (Dennis Nezic)
4. TCP Port 32768 (Diego Delavega)
5. ATI Radeon All-In-Wonder 7500 (thong nguyen)
6. i82845G/GL (daniel abergel)
7. Re: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode (Lionel Lecoq)
8. RE: i82845G/GL (Joshua P. Metcalf)
9. R: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode (Diego Cardinali)
10. Re: i82845G/GL (Zaher Salman)
11. Re: R: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode (Lionel Lecoq)
12. Re: i82845G/GL (Zaher Salman)
13. RE: i82845G/GL (Joshua P. Metcalf)
14. Re: i82845G/GL (Zaher Salman)
15. Re: RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode (Diego Cardinali)
--__--__--
Message: 1
Date: Thu, 24 Oct 2002 13:52:10 -0700 (PDT)
From: Lionel Lecoq <[EMAIL PROTECTED]>
Subject: Re: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode
To: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Then why are you trying to run 1024x768 with 32 bit?
During installation you don't get the final resolution unless you use the test option.
If your problem is that you get the wrong resolution automatically then go into your XF86Config
(resp. XF86Config-4 if that's what your distro uses) and then go to the screen section, there you
will find one or several display subsection and possibly a default resolution.
I would remove the 1024x768 from the mode line for the 32 (24?) resolution
and if you don't have one I would create a display subsection for 16bit with 1024x768 in order to
have the choice between 800x600 at 24 and 1024x768 at 16
If you don't know how to do it scream and I will post an example...
Lionel --- Diego Cardinali <[EMAIL PROTECTED]> wrote:
> Are you sure that your grafic-card supports 32Bit in the resolution
> 1042X786. Cause as i can see you also running in windows98 an MD8.1 and
> RH6.2 in a lower resolution. So maybe the configs are correct for your
> monitor but whick grafic-card do you use?
>
> Renč
I'm sure that my grafic card (S3 Trio64V+) DOESN'T support 32bit in
1024X786, but I'm sure that it supports 800X600 in 32bit resolution
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
--__--__--
Message: 2
From: "Diego Cardinali" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode
Date: Thu, 24 Oct 2002 18:04:11 +0200
Reply-To: [EMAIL PROTECTED]
No, my explanation wasn't clear, sorry.Then why are you trying to run 1024x768 with 32 bit?
The problem is that the monitor turns off when I try 800X600 AT 32 BIT!
that's all!
Anyway thank you!
--__--__--
Message: 3
From: "Dennis Nezic" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Thu, 24 Oct 2002 18:44:02 -0400
Subject: [Newbie]Ati Radeon 9000 Pro
Reply-To: [EMAIL PROTECTED]
How good is the support for this card in xfree86? .. I read the changelog, and it mentioned 2d support is present?
Then, how would I go about installing support for the card on my box? .. Preferably, without checking out the entire source tree?
Finally, when should I expect to see full support for the card? -)
_________________________________________________________________
Get faster connections -- switch to MSN Internet Access! http://resourcecenter.msn.com/access/plans/default.asp
--__--__--
Message: 4
From: "Diego Delavega" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Thu, 24 Oct 2002 20:41:33 -0500
Subject: [Newbie]TCP Port 32768
Reply-To: [EMAIL PROTECTED]
How does on turn off tcp port 32768? -nolisten tcp
doesn't seem to do it. With startx, everything is
OK, but with xdm, port 32768 is opened by xsm. I
can't find anything in the documentation that tells
how to turn it off.
_________________________________________________________________
Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp
--__--__--
Message: 5
From: "thong nguyen" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Fri, 25 Oct 2002 04:11:15 +0000
Subject: [Newbie]ATI Radeon All-In-Wonder 7500
Reply-To: [EMAIL PROTECTED]
Does anyone know if XFree86 currently support this card?
Thanks for any help
Thong N.
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
--__--__--
Message: 6
From: "daniel abergel" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Fri, 25 Oct 2002 10:51:42 +0200
Subject: [Newbie]i82845G/GL
Reply-To: [EMAIL PROTECTED]
C'est un message de format MIME en plusieurs parties.
------=_NextPart_000_0023_01C27C14.80BE23D0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello,
I can't get my Xwindow work. I have an integrated graphics controller =
i82845G/GL and as I read from INTEL website, I inserted a " driver =
"vesa" " line in the xf86conf file. But all I got is a blank(black) =
screen with an error message when I exit which reads :
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 10:24:59 =
2002
(=3D=3D) Using config file: "/etc/X11/XF86Config"
(WW) VESA(0): Failed to set up write-combining range =
(0xe8060000,0x70000)
(WW) VESA(0): Failed to set up write-combining range =
(0xe8050000,0x80000)
(WW) VESA(0): Failed to set up write-combining range =
(0xe8040000,0x90000)
(WW) VESA(0): Failed to set up write-combining range =
(0xe8030000,0xa0000)
(WW) VESA(0): Failed to set up write-combining range =
(0xe8020000,0xb0000)
(WW) VESA(0): Failed to set up write-combining range =
(0xe8010000,0xc0000)
(WW) VESA(0): Failed to set up write-combining range =
(0xe8000000,0xd0000)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, =
removing from list!
Can anybody help ?
Thank you=20
------=_NextPart_000_0023_01C27C14.80BE23D0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.3502.5390" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hello,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I can't get my Xwindow work. I have an =
integrated=20
graphics controller i82845G/GL and as I read from INTEL website, I =
inserted a "=20
driver "vesa" " line in the xf86conf file. But all I got is a =
blank(black)=20
screen with an error message when I exit which reads :</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Markers: (--) probed, (**) from config =
file, (=3D=3D)=20
default setting,<BR> =
(++) from=20
command line, (!!) notice, (II)=20
informational,<BR> (WW) =
warning,=20
(EE) error, (NI) not implemented, (??) unknown.<BR>(=3D=3D) Log file:=20
"/var/log/XFree86.0.log", Time: Fri Oct 25 10:24:59 2002<BR>(=3D=3D) =
Using config=20
file: "/etc/X11/XF86Config"<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8060000,0x70000)<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8050000,0x80000)<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8040000,0x90000)<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8030000,0xa0000)<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8020000,0xb0000)<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8010000,0xc0000)<BR>(WW) VESA(0): Failed to set up =
write-combining=20
range (0xe8000000,0xd0000)<BR>Could not init font path element=20
/usr/X11R6/lib/X11/fonts/Speedo/, removing from list!<BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Can anybody help ?</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Thank you </FONT></DIV></BODY></HTML>
------=_NextPart_000_0023_01C27C14.80BE23D0--
--__--__--
Message: 7
Date: Fri, 25 Oct 2002 04:15:23 -0700 (PDT)
From: Lionel Lecoq <[EMAIL PROTECTED]>
Subject: Re: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode
To: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
You may still have 1024x768 in the mode line which could cause the problem because X would be
creating a virtual screen and be lacking the memory for it...
Additionally, I don't recall which distro you have, if it is one which generates 2 config files
one for X 3.3.6 and the other for X 4.x.x you might be trying to hack the wrong one.
Check whether you are running X 4 or X 3 (check the log - /var/log/XFree86.0.log - where you can
also find out which config file is used) or X -version.
Lionel
--- Diego Cardinali <[EMAIL PROTECTED]> wrote:
> Then why are you trying to run 1024x768 with 32 bit?
No, my explanation wasn't clear, sorry.
The problem is that the monitor turns off when I try 800X600 AT 32 BIT!
that's all!
Anyway thank you!
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
--__--__--
Message: 8
Subject: RE: [Newbie]i82845G/GL
Date: Fri, 25 Oct 2002 07:15:53 -0400
From: "Joshua P. Metcalf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Although Intel "Suggests" you try to use the vesa driver. It does not work. The best that I have gotten was 640x480 with 256 colors. And that was only by chance. The only hope that the i82845G/GL uses have right now is for the next Xfree86 version to come out. I have also tried to download and install the latest development version from the CVS repository. But it would not install.
Hope that helps,
Josh
-----Original Message----- From: daniel abergel [mailto:abergel@;junie.ens.fr] Sent: Fri 10/25/2002 4:51 AM To: [EMAIL PROTECTED] Cc: Subject: [Newbie]i82845G/GL
Hello,
I can't get my Xwindow work. I have an integrated graphics controller i82845G/GL and as I read from INTEL website, I inserted a " driver "vesa" " line in the xf86conf file. But all I got is a blank(black) screen with an error message when I exit which reads :
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 10:24:59 2002
(==) Using config file: "/etc/X11/XF86Config"
(WW) VESA(0): Failed to set up write-combining range (0xe8060000,0x70000)
(WW) VESA(0): Failed to set up write-combining range (0xe8050000,0x80000)
(WW) VESA(0): Failed to set up write-combining range (0xe8040000,0x90000)
(WW) VESA(0): Failed to set up write-combining range (0xe8030000,0xa0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8020000,0xb0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8010000,0xc0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8000000,0xd0000)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Can anybody help ?
Thank you
--__--__--
Message: 9
From: "Diego Cardinali" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: R: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode
Date: Fri, 25 Oct 2002 09:58:24 +0200
Reply-To: [EMAIL PROTECTED]
----- Original Message -----
From: Lionel Lecoq <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 25, 2002 1:15 PM
Subject: Re: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411:
monitor turns off if I try 24 bit mode
You may still have 1024x768 in the mode line which could cause the problembecause X would becreating a virtual screen and be lacking the memory for it... Additionally, I don't recall which distro you have, if it is one whichgenerates 2 config filesone for X 3.3.6 and the other for X 4.x.x you might be trying to hack thewrong one.Check whether you are running X 4 or X 3 (check the log -/var/log/XFree86.0.log - where you canI checked XF86Config-4, which is the one my RedHat 7.3 uses, and it is ok:also find out which config file is used) or X -version. Lionel
Section "Screen"
Identifier "Screen0"
Device "S3 Trio64 (generic)"
Monitor "Sampo AlphaScan 411"
DefaultDepth 32
Subsection "Display"
Depth 32
Modes "800x600"
EndSubSection
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubSection
Subsection "Display"
Depth 8
Modes "1024x768"
EndSubSection
EndSection
I always get my monitor turned off, I use Ctrl+Alt+Backspace to exit
I tried startx >& startx.log
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 11:46:26 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a is
unresolved!
rm: impossibile rimuovere `.' o `..'
rm: impossibile rimuovere `.' o `..'
DCOPServer up and running.
Mutex destroy failure: Dispositivo o risorsa occupata
Mutex destroy failure: Dispositivo o risorsa occupata
mcop warning: user defined signal handler found for SIG_PIPE, overriding
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/PlainClock) Negative sizes (58,-4) are not
possible
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/QLabel) Negative sizes (61,-4) are not
possible
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/PlainClock) Negative sizes (58,-4) are not
possible
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/QLabel) Negative sizes (61,-4) are not
possible
QObject::connect: No such slot KWrited::block_in(const char*,int)
QObject::connect: (sender name: 'unnamed')
QObject::connect: (receiver name: 'unnamed')
ICE default IO error handler doing an exit(), pid = 881, errno = 0
ICE default IO error handler doing an exit(), pid = 883, errno = 2
ICE default IO error handler doing an exit(), pid = 886, errno = 0
ICE default IO error handler doing an exit(), pid = 889, errno = 0
ICE default IO error handler doing an exit(), pid = 891, errno = 0
ICE default IO error handler doing an exit(), pid = 896, errno = 0
ICE default IO error handler doing an exit(), pid = 897, errno = 0
xinit: connection to X server lost.
kdeinit: Fatal IO error: client killed
kdeinit: sending SIGHUP to children.
KLauncher: Exiting on signal 1
kdeinit: sending SIGTERM to children.
kdeinit: Exit.
Thank you very much again
--__--__--
Message: 10
Date: Fri, 25 Oct 2002 07:54:46 -0700
From: Zaher Salman <[EMAIL PROTECTED]>
Organization: TRIUMF
To: [EMAIL PROTECTED]
Subject: Re: [Newbie]i82845G/GL
Reply-To: [EMAIL PROTECTED]
Hi,
I have the same card and it is much better supported now in the CVS tree, check out this page:
http://www.xfree86.org/~dawes/845driver.html
for an explaination.
good luck
Zaher
daniel abergel wrote:
Hello,
I can't get my Xwindow work. I have an integrated graphics controller i82845G/GL and as I read from INTEL website, I inserted a " driver "vesa" " line in the xf86conf file. But all I got is a blank(black) screen with an error message when I exit which reads :
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 10:24:59 2002
(==) Using config file: "/etc/X11/XF86Config"
(WW) VESA(0): Failed to set up write-combining range (0xe8060000,0x70000)
(WW) VESA(0): Failed to set up write-combining range (0xe8050000,0x80000)
(WW) VESA(0): Failed to set up write-combining range (0xe8040000,0x90000)
(WW) VESA(0): Failed to set up write-combining range (0xe8030000,0xa0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8020000,0xb0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8010000,0xc0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8000000,0xd0000)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Can anybody help ?
--__--__--
Message: 11
Date: Fri, 25 Oct 2002 07:57:17 -0700 (PDT)
From: Lionel Lecoq <[EMAIL PROTECTED]>
Subject: Re: R: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode
To: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
I use depth 24 (theoretically identical to 32...) you could try that, but I am puzzled by your
first error message: Symbol xf86InterpretEDID etc. possibly someone else may help there...
Lionel
--- Diego Cardinali <[EMAIL PROTECTED]> wrote:
----- Original Message -----
From: Lionel Lecoq <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 25, 2002 1:15 PM
Subject: Re: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411:
monitor turns off if I try 24 bit mode
> You may still have 1024x768 in the mode line which could cause the problem
because X would be
> creating a virtual screen and be lacking the memory for it...
> Additionally, I don't recall which distro you have, if it is one which
generates 2 config files
> one for X 3.3.6 and the other for X 4.x.x you might be trying to hack the
wrong one.
> Check whether you are running X 4 or X 3 (check the log -
/var/log/XFree86.0.log - where you can
> also find out which config file is used) or X -version.
> Lionel
I checked XF86Config-4, which is the one my RedHat 7.3 uses, and it is ok:
Section "Screen"
Identifier "Screen0"
Device "S3 Trio64 (generic)"
Monitor "Sampo AlphaScan 411"
DefaultDepth 32
Subsection "Display"
Depth 32
Modes "800x600"
EndSubSection
Subsection "Display"
Depth 16
Modes "1024x768"
EndSubSection
Subsection "Display"
Depth 8
Modes "1024x768"
EndSubSection
EndSection
I always get my monitor turned off, I use Ctrl+Alt+Backspace to exit
I tried startx >& startx.log
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17-0.13smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 11:46:26 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a is
unresolved!
rm: impossibile rimuovere `.' o `..'
rm: impossibile rimuovere `.' o `..'
DCOPServer up and running.
Mutex destroy failure: Dispositivo o risorsa occupata
Mutex destroy failure: Dispositivo o risorsa occupata
mcop warning: user defined signal handler found for SIG_PIPE, overriding
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/PlainClock) Negative sizes (58,-4) are not
possible
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/QLabel) Negative sizes (61,-4) are not
possible
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/PlainClock) Negative sizes (58,-4) are not
possible
QWidget::setMinimumSize: The smallest allowed size is (0,0)
QWidget::setMaximumSize: (unnamed/QLabel) Negative sizes (61,-4) are not
possible
QObject::connect: No such slot KWrited::block_in(const char*,int)
QObject::connect: (sender name: 'unnamed')
QObject::connect: (receiver name: 'unnamed')
ICE default IO error handler doing an exit(), pid = 881, errno = 0
ICE default IO error handler doing an exit(), pid = 883, errno = 2
ICE default IO error handler doing an exit(), pid = 886, errno = 0
ICE default IO error handler doing an exit(), pid = 889, errno = 0
ICE default IO error handler doing an exit(), pid = 891, errno = 0
ICE default IO error handler doing an exit(), pid = 896, errno = 0
ICE default IO error handler doing an exit(), pid = 897, errno = 0
xinit: connection to X server lost.
kdeinit: Fatal IO error: client killed
kdeinit: sending SIGHUP to children.
KLauncher: Exiting on signal 1
kdeinit: sending SIGTERM to children.
kdeinit: Exit.
Thank you very much again
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/
--__--__--
Message: 12
Date: Fri, 25 Oct 2002 08:01:53 -0700
From: Zaher Salman <[EMAIL PROTECTED]>
Organization: TRIUMF
To: [EMAIL PROTECTED]
Subject: Re: [Newbie]i82845G/GL
Reply-To: [EMAIL PROTECTED]
I have the cvs compiled here. I am running mandrake 9.0 (kernel 2.4.19-16). So I am running now 1280x1024 Depth 24 and it works fine (there are some minor problems).
Zaher
Joshua P. Metcalf wrote:
Although Intel "Suggests" you try to use the vesa driver. It does not work. The best that I have gotten was 640x480 with 256 colors. And that was only by chance. The only hope that the i82845G/GL uses have right now is for the next Xfree86 version to come out. I have also tried to download and install the latest development version from the CVS repository. But it would not install.
Hope that helps,
Josh
-----Original Message----- From: daniel abergel [mailto:abergel@;junie.ens.fr] Sent: Fri 10/25/2002 4:51 AM To: [EMAIL PROTECTED] Cc: Subject: [Newbie]i82845G/GL
Hello,
I can't get my Xwindow work. I have an integrated graphics controller i82845G/GL and as I read from INTEL website, I inserted a " driver "vesa" " line in the xf86conf file. But all I got is a blank(black) screen with an error message when I exit which reads :
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25 10:24:59 2002
(==) Using config file: "/etc/X11/XF86Config"
(WW) VESA(0): Failed to set up write-combining range (0xe8060000,0x70000)
(WW) VESA(0): Failed to set up write-combining range (0xe8050000,0x80000)
(WW) VESA(0): Failed to set up write-combining range (0xe8040000,0x90000)
(WW) VESA(0): Failed to set up write-combining range (0xe8030000,0xa0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8020000,0xb0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8010000,0xc0000)
(WW) VESA(0): Failed to set up write-combining range (0xe8000000,0xd0000)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Can anybody help ?
Thank you
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
--__--__--
Message: 13
Subject: RE: [Newbie]i82845G/GL
Date: Fri, 25 Oct 2002 12:02:22 -0400
From: "Joshua P. Metcalf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Then my next question is.. can anyone help me with getting the latest
build onto RedHat 8.0? For some reason when I compile and build it
doesn't install correctly. It actually seems that it doesn't install at
all. Perhaps RedHat uses a different directory structure then the
default used by Xfree86.
Joshua -----Original Message-----
From: Zaher Salman [mailto:zaher@;triumf.ca] Sent: Friday, October 25, 2002 11:02 AM
To: [EMAIL PROTECTED]
Subject: Re: [Newbie]i82845G/GL
I have the cvs compiled here. I am running mandrake 9.0 (kernel 2.4.19-16). So I am running now 1280x1024 Depth 24 and it works fine (there are some minor problems).
Zaher
Joshua P. Metcalf wrote:
Although Intel "Suggests" you try to use the vesa driver. It does notwork. The best that I have gotten was 640x480 with 256 colors. And that was only by chance. The only hope that the i82845G/GL uses have right now is for the next Xfree86 version to come out. I have also tried to download and install the latest development version from the CVS repository. But it would not install.Hope that helps,
Josh
-----Original Message----- From: daniel abergel [mailto:abergel@;junie.ens.fr] Sent: Fri 10/25/2002 4:51 AM To: [EMAIL PROTECTED] Cc: Subject: [Newbie]i82845G/GL
Hello,
I can't get my Xwindow work. I have an integrated graphics
controller i82845G/GL and as I read from INTEL website, I inserted a " driver "vesa" " line in the xf86conf file. But all I got is a blank(black) screen with an error message when I exit which reads :Markers: (--) probed, (**) from config file, (==) default
setting,(++) from command line, (!!) notice, (II)informational,(WW) warning, (EE) error, (NI) not implemented, (??)unknown.(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 2510:24:59 2002(==) Using config file: "/etc/X11/XF86Config" (WW) VESA(0): Failed to set up write-combining range(0xe8060000,0x70000)(WW) VESA(0): Failed to set up write-combining range(0xe8050000,0x80000)(WW) VESA(0): Failed to set up write-combining range(0xe8040000,0x90000)(WW) VESA(0): Failed to set up write-combining range(0xe8030000,0xa0000)(WW) VESA(0): Failed to set up write-combining range(0xe8020000,0xb0000)(WW) VESA(0): Failed to set up write-combining range(0xe8010000,0xc0000)(WW) VESA(0): Failed to set up write-combining range(0xe8000000,0xd0000)Could not init font path element/usr/X11R6/lib/X11/fonts/Speedo/, removing from list!_______________________________________________
Can anybody help ?
Thank you
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
--__--__--
Message: 14
Date: Fri, 25 Oct 2002 09:15:57 -0700
From: Zaher Salman <[EMAIL PROTECTED]>
Organization: TRIUMF
To: [EMAIL PROTECTED]
Subject: Re: [Newbie]i82845G/GL
Reply-To: [EMAIL PROTECTED]
Well, I know that redhar uses the same directory structure, but there was a peoblem with the cvs tree a few weeks ago, but it is solved now, maybe you should try to download it again! After the installation (which went smooth) I had some problems with fonts and had to reinstall them, but other than that everything was fine.
Zaher
Joshua P. Metcalf wrote:
Then my next question is.. can anyone help me with getting the latest
build onto RedHat 8.0? For some reason when I compile and build it
doesn't install correctly. It actually seems that it doesn't install at
all. Perhaps RedHat uses a different directory structure then the
default used by Xfree86.
Joshua -----Original Message-----
From: Zaher Salman [mailto:zaher@;triumf.ca] Sent: Friday, October 25, 2002 11:02 AM
To: [EMAIL PROTECTED]
Subject: Re: [Newbie]i82845G/GL
I have the cvs compiled here. I am running mandrake 9.0 (kernel 2.4.19-16). So I am running now 1280x1024 Depth 24 and it works fine (there are some minor problems).
Zaher
Joshua P. Metcalf wrote:
work. The best that I have gotten was 640x480 with 256 colors. And thatAlthough Intel "Suggests" you try to use the vesa driver. It does not
was only by chance. The only hope that the i82845G/GL uses have right
now is for the next Xfree86 version to come out. I have also tried to
download and install the latest development version from the CVS
repository. But it would not install.
controller i82845G/GL and as I read from INTEL website, I inserted a "
Hope that helps,
Josh
-----Original Message----- From: daniel abergel [mailto:abergel@;junie.ens.fr] Sent: Fri 10/25/2002 4:51 AM To: [EMAIL PROTECTED] Cc: Subject: [Newbie]i82845G/GL
Hello,
I can't get my Xwindow work. I have an integrated graphics
driver "vesa" " line in the xf86conf file. But all I got is a
blank(black) screen with an error message when I exit which reads :
Markers: (--) probed, (**) from config file, (==) defaultsetting,
informational,(++) from command line, (!!) notice, (II)
unknown.(WW) warning, (EE) error, (NI) not implemented, (??)
10:24:59 2002(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 25
(0xe8060000,0x70000)(==) Using config file: "/etc/X11/XF86Config" (WW) VESA(0): Failed to set up write-combining range
(0xe8050000,0x80000)(WW) VESA(0): Failed to set up write-combining range
(0xe8040000,0x90000)(WW) VESA(0): Failed to set up write-combining range
(0xe8030000,0xa0000)(WW) VESA(0): Failed to set up write-combining range
(0xe8020000,0xb0000)(WW) VESA(0): Failed to set up write-combining range
(0xe8010000,0xc0000)(WW) VESA(0): Failed to set up write-combining range
(0xe8000000,0xd0000)(WW) VESA(0): Failed to set up write-combining range
/usr/X11R6/lib/X11/fonts/Speedo/, removing from list!Could not init font path element
Can anybody help ?
Thank you
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
--__--__--
Message: 15
From: "Diego Cardinali" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: Re: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan 411: monitor turns off if I try 24 bit mode
Date: Fri, 25 Oct 2002 13:32:12 +0200
Reply-To: [EMAIL PROTECTED]
----- Original Message -----
From: Lionel Lecoq <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, October 25, 2002 4:57 PM
Subject: Re: R: R: R: [Newbie]RedHat 7.3, S3 Trio64V+ and Sampo Alphascan
411: monitor turns off if I try 24 bit mode
I use depth 24 (theoretically identical to 32...) you could try that, butI am puzzled by yourIf I try 24 bit (when I say 24 bit mode I mean 32 bit mode, and when I sayfirst error message: Symbol xf86InterpretEDID etc. possibly someone else may help there... Lionel
32 bit mode I mean 24 bit mode...) with Xconfigurator my monitor turns off,
with both (800x600 and 640x480) the resolutions available... thank you
again, I'm thinking about returning at my old RedHat 6.2, this 7.3 is also
too slow for my Pentium MMX 266 Mhz with a 2 megs video card...
--__--__--
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/newbie
End of Newbie Digest
_______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
