[newbie] Emailserver
Hi, I'm using Mandrake 9.1 and want to be able to receive mails on that machine (more for experimenting that real use :) ). Now, I've allready got the sending part up and running, but if I send an email back to that adress, I doesn't bounce anywhere, but I don't get it on my machine. Could u give me a clue? I attached the only file that I allready changed manually. Kind regards Jan main.cf Description: Binary data Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Cdrecord and my pc are hanging when I'm trying to burn a cd.
Hello, My cdwriter doesn't do what I asked him to do. Most of the time, he starts writing, and after a 20 Mb, he stops. And, the funny part is that de leds of capslock and scrollock starts going on/off all the time. For the rest, my machine crashed. I couldn't do anything any more. The command that I use is cdrecord speed=1 dev=0,3,0 -isosize -data cdimage.raw I also tried it without de isosize flag, but it didn't work either. I must be honest, it worked one time. But that's it. Can you help me Kind regards Jan Verstuyft When I run this command cdrecord -v -dummy speed=1 dev=0,3,0 -isosize -data cdimage.raw, he gaves me the following output Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schillin g TOC Type: 1 = CD-ROM scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.6' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'HP ' Identifikation : 'CD-Writer+ 7200 ' Revision : '3.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Supported modes: TAO PACKET RAW/R16 Drive buf size : 786432 = 768 KB FIFO size : 4194304 = 4096 KB Track 01: data 491 MB Total size: 564 MB (55:58.53) = 251890 sectors Lout start: 565 MB (56:00/40) = 251890 sectors Current Secsize: 2048 ATIP start of lead in: -11769 (97:25/06) ATIP start of lead out: 359775 (79:59/00) Disk type:Short strategy type (Phthalocyanine or similar) Manuf. index: 64 Manufacturer: MPO Blocks total: 359775 Blocks current: 359775 Blocks remaining: 107885 Starting to write CD/DVD at speed 2 in dummy TAO mode for single session. Last chance to quit, starting dummy write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 19 of 491 MB written (fifo 100%) [buf 92%] 2.1x. And at this moment, he starts blinking again, like I described above. Can you help me Kind regards Jan Verstuyft Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] cdwriter
Oops, sorry, my mistake. I have a CD WRITER from HP 7200+ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ralph Slooten Sent: woensdag 19 maart 2003 22:47 To: [EMAIL PROTECTED] Subject: Re: [newbie] cdwriter On Wed, 19 Mar 2003 19:43:19 +0100 Jan Verstuyft [EMAIL PROTECTED] wrote: Can you help me If you tell us maybe what writer you have ;-) Greetings Ralph -- http://axljab.homelinux.org:8080/ Linux is not The Answer. Yes is the answer. Linux is The Question Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] cdwriter
This is the output from the cdrecord -scanbus. I hope you know enough now. Kind regards Jan Verstuyft Linux sg driver version: 3.1.24 Using libscg version 'schily-0.6' scsibus0: 0,0,0 0) * 0,1,0 1) * 0,2,0 2) * 0,3,0 3) 'HP ' 'CD-Writer+ 7200 ' '3.01' Removable CD-ROM 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Thayer Sent: donderdag 20 maart 2003 6:10 To: [EMAIL PROTECTED] Subject: Re: [newbie] cdwriter On Wed, 19 Mar 2003 19:43:19 +0100 Jan Verstuyft [EMAIL PROTECTED] wrote: Hello, My cdwriter doesn't do what I asked him to do. Most of the time, he starts writing, and after a 20 Mb, he stops. And, the funny part is that de leds of capslock and scrollock starts going on/off all the time. For the rest, my machine crashed. I couldn't do anything any more. The command that I use is cdrecord speed=1 dev=0,3,0 -isosize -data cdimage.raw I also tried it without de isosize flag, but it didn't work either. I must be honest, it worked one time. But that's it. Can you help me Kind regards Jan Verstuyft What output do you get from cdrecord -scanbus? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] cdwriter
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adolfo Bello Sent: donderdag 20 maart 2003 11:34 To: [EMAIL PROTECTED] Subject: Re: [newbie] cdwriter On Thu, 2003-03-20 at 01:09, Scott Thayer wrote: On Wed, 19 Mar 2003 19:43:19 +0100 Jan Verstuyft [EMAIL PROTECTED] wrote: Hello, My cdwriter doesn't do what I asked him to do. Most of the time, he starts writing, and after a 20 Mb, he stops. And, the funny part is that de leds of capslock and scrollock starts going on/off all the time. For the rest, my machine crashed. I couldn't do anything any more. The command that I use is cdrecord speed=1 dev=0,3,0 -isosize -data cdimage.raw I also tried it without de isosize flag, but it didn't work either. I must be honest, it worked one time. But that's it. Can you help me Kind regards Jan Verstuyft What output do you get from cdrecord -scanbus? What messages do you get if you try: cdrecord -v -dummy speed=1 dev=0,3,0 -isosize -data cdimage.raw He gave me this if I tried the command from above. Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schillin g TOC Type: 1 = CD-ROM scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.6' atapi: 1 Device type: Removable CD-ROM Version: 0 Response Format: 1 Vendor_info: 'HP ' Identifikation : 'CD-Writer+ 7200 ' Revision : '3.01' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Supported modes: TAO PACKET RAW/R16 Drive buf size : 786432 = 768 KB FIFO size : 4194304 = 4096 KB Track 01: data 491 MB Total size: 564 MB (55:58.53) = 251890 sectors Lout start: 565 MB (56:00/40) = 251890 sectors Current Secsize: 2048 ATIP start of lead in: -11769 (97:25/06) ATIP start of lead out: 359775 (79:59/00) Disk type:Short strategy type (Phthalocyanine or similar) Manuf. index: 64 Manufacturer: MPO Blocks total: 359775 Blocks current: 359775 Blocks remaining: 107885 Starting to write CD/DVD at speed 2 in dummy TAO mode for single session. Last chance to quit, starting dummy write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 19 of 491 MB written (fifo 100%) [buf 92%] 2.1x. And at this moment, he starts blinking again, like I described above. BTW, man cdrecord alerts not to use -isosize with iso files created with mkisofs. Have you tried using the -dao option (in case your drive handles write-at-once), like in: cdrecord -v -dummy -eject speed=1 dev=0,3,0 -dao cdimage.raw -- __ / \\ @ __ __@ Adolfo Bello [EMAIL PROTECTED] / // // /\ / \\ // \ // Bello Ingenieria S.A, ICQ: 65910258 / \\ // / \\ / // // / //celular: +58 416 609-6213 /___// // / _/ \__\\ //__/ // fax: +58 212 952-6797 www.bisapi.com //pager : [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] cdwriter
Hello, My cdwriter doesn't do what I asked him to do. Most of the time, he starts writing, and after a 20 Mb, he stops. And, the funny part is that de leds of capslock and scrollock starts going on/off all the time. For the rest, my machine crashed. I couldn't do anything any more. The command that I use is cdrecord speed=1 dev=0,3,0 -isosize -data cdimage.raw I also tried it without de isosize flag, but it didn't work either. I must be honest, it worked one time. But that's it. Can you help me Kind regards Jan Verstuyft Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com