Re: [nox-dev] NOX installation problem: openssl/md5.h is not found

2011-03-03 Thread Murphy McCauley
A couple of notes first: Most of us use Debian or Ubuntu, so our support for 
Fedora is spotty. :)  And I don't think xerces is a dependency anymore.

I think this may be an issue that I pushed a fix for in the destiny branch as 
commit 73fc9071b9d4f77b8314bf44fe4e5c6bccb480df.  So you might want to either 
try the destiny branch or try applying that to zaku.

-- Murphy

On Mar 3, 2011, at 9:31 AM, Dongxu Zhang wrote:

> Hi everyone,
> 
> Sorry about the previous incomplete letter sent by mistake...
> 
> I am quite new to NOX and openflow. Weeks ago, following the instructions on 
> the HOTITutorial2010, I succeeded to create a learning switch, using a VM 
> image and tools(mininet, etc.) within it. Now I want to deploy an OpenFlow 
> network with several PCs, but faced some problems when I tried to install NOX 
> on the "controller".
>   
>   
>   
>   
>   
>   
>   
> The Linux distribution I used is Fedora14.
> These packages are installed: xerces-c-devel python-twisted libpcap-devel  
> I just do following:
> 
>  git clone git://noxrepo.org/nox
>  ./boot.sh  
> 
> and that seems OK, then
> 
>  mkdir build/ 
>  cd build/
>  ../configure
> 
> After a while I got a messages :configure: error: openssl/md5.h not found. 
> NOX requires OpenSSL
> and the configure process quit.
> At first I thought this may be caused by missing openssl or openssl-devel, so 
> I execute:
> 
>  sudo yum install openssl openssl-devel
> 
> but I find these are already installed. Then I execute:
>  
>  find / -name md5.h
>  
> and I got a directory: /usr/include/openssl/md5.h
> This directory shouldn't have any problem and could be found by the 
> ../configure, I guess.
> 
> So, what should I do now? (maybe a little stupid getting stuck on this 
> problem, but it realy bothered me for a long time...)
> Maybe there are some other nox-dependencies package I should install ? 
> Attached please find the config.log, if it is helpful.
> 
> Looking forword for your reply.
> 
> Regards
> 
> Dongxu Zhang
> Beijing University of Posts and Telecommunication
> China
> 
> ___
> nox-dev mailing list
> nox-dev@noxrepo.org
> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org

___
nox-dev mailing list
nox-dev@noxrepo.org
http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org


[nox-dev] NOX installation problem: openssl/md5.h is not found

2011-03-03 Thread Dongxu Zhang
Hi everyone,Sorry about the previous incomplete letter sent by mistake...I am quite new to NOX and openflow. Weeks ago, following the instructions on the HOTITutorial2010, I succeeded to create a learning switch, using a VM image and tools(mininet, etc.) within it. Now I want to deploy an OpenFlow network with several PCs, but faced some problems when I tried to install NOX on the "controller".The Linux distribution I used is Fedora14.These packages are installed: xerces-c-devel python-twisted libpcap-devel  I just do following: git clone git://noxrepo.org/nox ./boot.sh  and that seems OK, then mkdir build/  cd build/ ../configureAfter a while I got a messages :configure: error: openssl/md5.h not found. NOX requires OpenSSLand the configure process quit.At first I thought this may be caused by missing openssl or openssl-devel, so I execute: sudo yum install openssl openssl-develbut I find these are already installed. Then I execute:  find / -name md5.h and I got a directory: /usr/include/openssl/md5.hThis directory shouldn't have any problem and could be found by the ../configure, I guess.So, what should I do now? (maybe a little stupid getting stuck on this problem, but it realy bothered me for a long time...)Maybe there are some other nox-dependencies package I should install ? Attached please find the config.log, if it is helpful.Looking forword for your reply.RegardsDongxu ZhangBeijing University of Posts and TelecommunicationChina___
nox-dev mailing list
nox-dev@noxrepo.org
http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org