Re: [ns] How to find vehicle route information
Ajmal, NS2 does not know map, it only moves a node from point A to point B in straight line in a given velocity. Assume Node 0 is positioned at (100,100), if it is moving in one direction is, $ns_ at 0.0 $node_(0) setdest 150.0 150.0 1.0 to move in the opposite direction is, $ns_ at 0.0 $node_(0) setdest 50.0 50.0 1.0 Do note it has no negative value as the point of origin is (0,0) Good Luck. rgds Saravanan K On Wed, Aug 22, 2012 at 6:28 AM, ajmal khan engaj...@yahoo.com wrote: Dear all Hi I am working on VANET. I need to know how to find a route of a vehicle. I can generate mobility traces of vehicles in VanetMobisim and it looks like this. $ns_ at 0.0 $node_(0) setdest 714.9497484683059 494.9497484683058 0.75267607 i.e. node 0 will move towards mentioned (x,y) coordinates at speed of 0.752 but it does not give any information which route it will follow on a given map. Please help me how to figure out the routes of vehicles. If there is any other tool that can help. please mention that as well. Also i would like to know how to find that a vehicle is moving in opposite direction. your help will be greatly appreciated. Thanks in advance AJMAL KHAN Ph.D Scholar Telecommunication Networks Lab School of Electrical Engineering and Computer Science Kyungpook National University Cell : +82 (10) 7732-3885
Re: [ns] Running algorithms in C++ in NS2
SO HAVE YOU FOUND SOME WAY TO DO THAT I AM WORKING WITH TOPOLOGY CONTROL SO I NEED SOME INFO -- View this message in context: http://old.nabble.com/Running-algorithms-in-C%2B%2B-in-NS2-tp27518160p34334593.html Sent from the ns-users mailing list archive at Nabble.com.
Re: [ns] Running algorithms in C++ in NS2
Rip van Winkle wrote: Hi all, I am new to NS2 Simulator and I've been facing some problems. I have the Minimum Spanning Tree in NS2 and I want to use it in simulations of sensor networks(I'm using this algorithm to route data from the source to the sink). The problem is that I don't know where to start and how to do it. It would be really helpful of you people if you could post some links to resources from where I can get started on this. Thanks!! -- View this message in context: http://old.nabble.com/Running-algorithms-in-C%2B%2B-in-NS2-tp27518160p34334591.html Sent from the ns-users mailing list archive at Nabble.com.
Re: [ns] How to find vehicle route information
Dear Saravan Thanks a lot for your reply. I understand your point about movement of a node 0 in different direction. but i need to know about neighbors of node 0. if node 0 receives GPS information of neighbor nodes, how to know that they are moving in opposite direction, a neighbor node behind node 0 does not mean that he is moving in opposite direction just by looking at its position 50,50 as compared to node 0 position 100,100. I hope u understand my point, this is little difficult for me to know about the direction. If you are working in vanets,then u might have idea about different papers like VADD, Geoppos etc who are using direction of nighbors and also furtur route information of neighbor, which i have no idea how to figure out, thanks a lot once again for ur precious time. Hope i will find some helpful response soon. AJMAL KHAN Ph.D Scholar Telecommunication Networks Lab School of Electrical Engineering and Computer Science Kyungpook National University Cell : +82 (10) 7732-3885 From: Saravanan Kandasamy svana...@gmail.com To: ns-users@isi.edu ns-users@ISI.EDU Sent: Wednesday, August 22, 2012 7:51 PM Subject: Re: [ns] How to find vehicle route information Ajmal, NS2 does not know map, it only moves a node from point A to point B in straight line in a given velocity. Assume Node 0 is positioned at (100,100), if it is moving in one direction is, $ns_ at 0.0 $node_(0) setdest 150.0 150.0 1.0 to move in the opposite direction is, $ns_ at 0.0 $node_(0) setdest 50.0 50.0 1.0 Do note it has no negative value as the point of origin is (0,0) Good Luck. rgds Saravanan K On Wed, Aug 22, 2012 at 6:28 AM, ajmal khan engaj...@yahoo.com wrote: Dear all Hi I am working on VANET. I need to know how to find a route of a vehicle. I can generate mobility traces of vehicles in VanetMobisim and it looks like this. $ns_ at 0.0 $node_(0) setdest 714.9497484683059 494.9497484683058 0.75267607 i.e. node 0 will move towards mentioned (x,y) coordinates at speed of 0.752 but it does not give any information which route it will follow on a given map. Please help me how to figure out the routes of vehicles. If there is any other tool that can help. please mention that as well. Also i would like to know how to find that a vehicle is moving in opposite direction. your help will be greatly appreciated. Thanks in advance AJMAL KHAN Ph.D Scholar Telecommunication Networks Lab School of Electrical Engineering and Computer Science Kyungpook National University Cell : +82 (10) 7732-3885
[ns] Error displayed in running tcl scripts in ns2-32
Hello friends! When i try to run any tcl script in ns-2.32, i am facing the flowing error Missing required flag -x in: W -t 150 Missing required flag -y in: W -t 150 Parsing error in event. Can any body help me out in this regard? Will be much obliged Regards -- **R.Manjula Research Scholar Dept of EECE IIT Kharagpur West Bengal ** -- **R.Manjula Sr.Lecturer, Dept of ECE BITM, Bellary Karnataka. Current Status: Research Scholar Dept of EECE IIT Kharagpur West Bengal **