Hi all,
I agree with most of what has been said on this thread. I only
restricted my advice to reed opening because I only wanted to mention
clipping the reed when all else had been tried. It is after all
irreversible, unless someone has found a way of gluing the bits back on?
There was one other option I thought of which was to move the reed
farther out of the chanter and play at a slightly higher pressure. If
this cures the problem and the resulting pressure is too high, then the
reed must be scraped to soften it, clipped to sharpen it c. c.
However, right now I would like to know how Kevin got his chanter in
tune as this will add to my knowledge.
Barry
Gibbons, John wrote:
Kevin,
What was the trouble in the end?
Or more precisely, what remedy cured it?
I'd trust the ones with hands on experimental knowledge rather than a mere
theoretician,
but theory is all I have!
John
From: lute-...@cs.dartmouth.edu [lute-...@cs.dartmouth.edu] on behalf of Kevin
[tilb...@yahoo.com]
Sent: 16 November 2011 08:57
To: Dartmouth nsp list N.P.S. site
Subject: [NSP] Re: flat chanter in the middle
Many thanks to all who wrote about my chanter being flat. i did what
you advised and it has solved the problem. many thanks my chanter is
now back in tune.
best wishes
kevin
__
From: Dave Shawd...@daveshaw.co.uk
To: Kevintilb...@yahoo.com; Dartmouth nsp list N.P.S. site
nsp@cs.dartmouth.edu
Sent: Tuesday, 15 November 2011, 10:16
Subject: [NSP] Re: flat chanter in the middle
Hi Kevin
I would agree with the detail of Philips advice.
When the octaves are in tune with each other and the fifth is flat then
the reed is too long.
You need to shorten the reed by half millimetre cuts(or less) until the
intervals are correct.
I use a cut throat type razor for this, on an endgrain hardwood block (
boxwood).
A heavy craft knife would do on some firm surface, but you have to be
careful as you can give yourself a nasty cut
if the slightest slip occurs.
Tuning the chanter to proper pitch is a whole different ballgame!
Cheers,
Dave
Dave Shaw, Northumbrian and Scottish Smallpipes, Irish Pipes and SHAW
Whistles
www.daveshaw.co.uk
- Original Message - From: Kevin[1]tilb...@yahoo.com
To: Dartmouth nsp list N.P.S. site[2]nsp@cs.dartmouth.edu
Sent: Sunday, November 13, 2011 8:20 PM
Subject: [NSP] flat chanter in the middle
Hi to All,
Can anyone advice me on the tuning of my chanter to the drones. The
top
G and the bottom G are in tune with the drones but the middle notes
especially the D is a fraction out of tune, a little flat. is this
rectified by moving the reed, if so which way? or opening the reed
or
closing it?
the chanter has been in tune in the past but since changing the reed
i
find these problems, it is either the top/bottom notes are out or
the
middle notes are outany advice?
thanks
kevin
--
To get on or off this list see list information at
[3]http://www.cs.dartmouth.edu/~wbc/lute-admin/index.html
--
References
1. mailto:tilb...@yahoo.com
2. mailto:nsp@cs.dartmouth.edu
3. http://www.cs.dartmouth.edu/%7Ewbc/lute-admin/index.html
