Re: [NTG-context] \setuppapersize and \startMPpage
2006/5/11, Aditya Mahajan [EMAIL PROTECTED]:
On Wed, 10 May 2006, Johan Sandblom wrote:
Thank you, this almost works, but the title graphic (of thesis size)
is not centered on the A4 paper, but in the lower right corner. How
can I make it go to the right place?
\definepapersize[thesis][width=169mm, height=239mm]
\setuppapersize[thesis][A4]
\starttext
\startMPgraphic
% Some metafun
\stopMPgraphic
\loadcurrentMPgraphic{possibly something should go here?}
\placeMPgraphic
% Some text
\stoptext
Untested, but how about
\loadcurrentMPgraphic %{width=\textwidth}
%Try with and without textwidth
\placefigure
[here]
{none}
{\placeMPgraphic}
Yes, I tried that; with no arguments to \loadcurrentMPgraphic the
thesis page is placed on the bottom of the A4 and not quite in the
middle (?). with width=\textwidth or \makeupwidth the result is the
same.
Aditya
PS: In future, also copy to the list, others may have better idea on
how to do this.
Yes, I had intended to, and thought I did, but apparently I am more
trigger happy than I allow for ...
Thank you for your help, Johan
Regards, Johan
2006/5/9, Aditya Mahajan [EMAIL PROTECTED]:
On Tue, 9 May 2006, Johan Sandblom wrote:
Dear expertise,
I have the following:
\definepapersize[thesis][width=169mm, height=239mm]
\setuppapersize[thesis][A4]
\setuplayout
[location=middle, marking=on]
\setuppagenumbering
[alternative=doublesided, location=marginedge, state=stop]
\starttext
% Title page
\startMPpage
% Some metafun
\stopMPpage
% Some text
\stoptext
The resulting pdf has a smaller first page (thesis size) while the
rest are A4 with the thesis pages place centrally. I would like to see
the title page placed on an A4 sheet as well. What am I doing wrong?
MPpage creates a page with dimensions equal to the bounding box of the
graphic. If you want to center a MP figure on your title page, use
\startMPgraphic
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
--
Johan Sandblom N8, MRC, Karolinska sjh
t +46851776108 17176 Stockholm
m +46735521477 Sweden
What is wanted is not the will to believe, but the
will to find out, which is the exact opposite
- Bertrand Russell
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
--
Johan Sandblom N8, MRC, Karolinska sjh
t +46851776108 17176 Stockholm
m +46735521477 Sweden
What is wanted is not the will to believe, but the
will to find out, which is the exact opposite
- Bertrand Russell
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize and \startMPpage
Johan Sandblom wrote:
2006/5/11, Aditya Mahajan [EMAIL PROTECTED]:
On Wed, 10 May 2006, Johan Sandblom wrote:
Thank you, this almost works, but the title graphic (of thesis size)
is not centered on the A4 paper, but in the lower right corner. How
can I make it go to the right place?
\definepapersize[thesis][width=169mm, height=239mm]
\setuppapersize[thesis][A4]
\starttext
\startMPgraphic
% Some metafun
\stopMPgraphic
\loadcurrentMPgraphic{possibly something should go here?}
\placeMPgraphic
% Some text
\stoptext
Untested, but how about
\loadcurrentMPgraphic %{width=\textwidth}
%Try with and without textwidth
\placefigure
[here]
{none}
{\placeMPgraphic}
Yes, I tried that; with no arguments to \loadcurrentMPgraphic the
thesis page is placed on the bottom of the A4 and not quite in the
middle (?). with width=\textwidth or \makeupwidth the result is the
same.
Aditya
PS: In future, also copy to the list, others may have better idea on
how to do this.
Yes, I had intended to, and thought I did, but apparently I am more
trigger happy than I allow for ...
Thank you for your help, Johan
Regards, Johan
2006/5/9, Aditya Mahajan [EMAIL PROTECTED]:
On Tue, 9 May 2006, Johan Sandblom wrote:
Dear expertise,
I have the following:
\definepapersize[thesis][width=169mm, height=239mm]
\setuppapersize[thesis][A4]
\setuplayout
[location=middle, marking=on]
\setuppagenumbering
[alternative=doublesided, location=marginedge, state=stop]
\starttext
% Title page
\startMPpage
% Some metafun
\stopMPpage
% Some text
\stoptext
The resulting pdf has a smaller first page (thesis size) while the
rest are A4 with the thesis pages place centrally. I would like to see
the title page placed on an A4 sheet as well. What am I doing wrong?
MPpage creates a page with dimensions equal to the bounding box of the
graphic. If you want to center a MP figure on your title page, use
\startMPgraphic
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
\definepapersize[thesis][width=169mm, height=239mm]
\setuppapersize[thesis][A4]
\definelayer[page][width=\paperwidth,height=\paperheight]
\starttext
\startTEXpage
\setlayer
[page]
[preset=lefttop,x=3cm,y=4cm]
{\startMPcode
fill fullcircle scaled 10cm;
\stopMPcode}
\tightlayer[page]
\stopTEXpage
\stoptext
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize and \startMPpage
2006/5/11, Hans Hagen [EMAIL PROTECTED]:
\definepapersize[thesis][width=169mm, height=239mm]
\setuppapersize[thesis][A4]
\definelayer[page][width=\paperwidth,height=\paperheight]
\starttext
\startTEXpage
\setlayer
[page]
[preset=lefttop,x=3cm,y=4cm]
{\startMPcode
fill fullcircle scaled 10cm;
\stopMPcode}
\tightlayer[page]
\stopTEXpage
\stoptext
This works if I change \paperwidth and \paperheight to
\printpaperwidth and \printpaperheight and change the dimensions
slightly.
Thank you, Johan
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
--
Johan Sandblom N8, MRC, Karolinska sjh
t +46851776108 17176 Stockholm
m +46735521477 Sweden
What is wanted is not the will to believe, but the
will to find out, which is the exact opposite
- Bertrand Russell
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] \setuppapersize and \startMPpage
Dear expertise, I have the following: \definepapersize[thesis][width=169mm, height=239mm] \setuppapersize[thesis][A4] \setuplayout [location=middle, marking=on] \setuppagenumbering [alternative=doublesided, location=marginedge, state=stop] \starttext % Title page \startMPpage % Some metafun \stopMPpage % Some text \stoptext The resulting pdf has a smaller first page (thesis size) while the rest are A4 with the thesis pages place centrally. I would like to see the title page placed on an A4 sheet as well. What am I doing wrong? Johan -- Johan Sandblom N8, MRC, Karolinska sjh t +46851776108 17176 Stockholm m +46735521477 Sweden What is wanted is not the will to believe, but the will to find out, which is the exact opposite - Bertrand Russell ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setuppapersize and \startMPpage
On Tue, 9 May 2006, Johan Sandblom wrote: Dear expertise, I have the following: \definepapersize[thesis][width=169mm, height=239mm] \setuppapersize[thesis][A4] \setuplayout [location=middle, marking=on] \setuppagenumbering [alternative=doublesided, location=marginedge, state=stop] \starttext % Title page \startMPpage % Some metafun \stopMPpage % Some text \stoptext The resulting pdf has a smaller first page (thesis size) while the rest are A4 with the thesis pages place centrally. I would like to see the title page placed on an A4 sheet as well. What am I doing wrong? MPpage creates a page with dimensions equal to the bounding box of the graphic. If you want to center a MP figure on your title page, use \startMPgraphic Aditya -- Aditya Mahajan, EECS Systems, University of Michigan http://www.eecs.umich.edu/~adityam || Ph: 7342624008 ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
