Re: [NTG-context] Invalid keyword \spaceskip
On 6/27/2021 11:36 AM, Steffen Wolfrum wrote:
Am 27.06.2021 um 09:16 schrieb Hans Hagen :
On 6/26/2021 11:56 PM, Wolfgang Schuster wrote:
Steffen Wolfrum schrieb am 26.06.2021 um 23:38:
Am 26.06.2021 um 22:43 schrieb Wolfgang Schuster
:
Steffen Wolfrum schrieb am 26.06.2021 um 22:26:
PS: with
% engine=luatex
it works fine.
Add \relax after the last skip value, i.e.
\spaceskip = 1pt plus 1pt minus 1.5pt\relax
LMTX allows multiple plus and minus values for a skip value and the M in
Matilda starts the scan for an additional minus value.
Wow, this sounds interesting. Is there an example of how to use multiple values?
I think the only examples are in mails from Hans. When you set multiple plus or
minus values (as far as i remember) only the last setting is used and all
previous ones are ignored.
Maybe in some article. Anyway, here is an example:
\starttext
test \skip0=10pt plus 10pt minus 10pt plus 20pt
test \skip0=10pt plus 10pt plus 20pt minus 10pt
test \vrule width 10pt height 10pt depth 10pt depth 10pt height 10pt
% test \hbox to 10pt to 10pt {x}
\stoptext
compare pdftex and luametatex.
ok. but why does this run fine
\starttext
Test \spaceskip = 1.0pt plus 1pt minus 1.5pt Wolfgang
\stoptext
while this ends in an error message?
\starttext
Test \spaceskip = 1.0pt plus 1pt minus 1.5pt Matilda
\stoptext
because scanning is case insensitive so the m triggeres the keyword
error ... keep in mind that by omitting a \relax you've always been
lucky so far (probably no follow up texts that had plus or minus) ..
luametatex just warns earlier
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Invalid keyword \spaceskip
> Am 27.06.2021 um 09:16 schrieb Hans Hagen :
>
> On 6/26/2021 11:56 PM, Wolfgang Schuster wrote:
>> Steffen Wolfrum schrieb am 26.06.2021 um 23:38:
Am 26.06.2021 um 22:43 schrieb Wolfgang Schuster
:
Steffen Wolfrum schrieb am 26.06.2021 um 22:26:
> PS: with
>
> % engine=luatex
>
> it works fine.
Add \relax after the last skip value, i.e.
\spaceskip = 1pt plus 1pt minus 1.5pt\relax
LMTX allows multiple plus and minus values for a skip value and the M in
Matilda starts the scan for an additional minus value.
>>> Wow, this sounds interesting. Is there an example of how to use multiple
>>> values?
>> I think the only examples are in mails from Hans. When you set multiple plus
>> or minus values (as far as i remember) only the last setting is used and all
>> previous ones are ignored.
> Maybe in some article. Anyway, here is an example:
>
> \starttext
> test \skip0=10pt plus 10pt minus 10pt plus 20pt
>
> test \skip0=10pt plus 10pt plus 20pt minus 10pt
>
> test \vrule width 10pt height 10pt depth 10pt depth 10pt height 10pt
>
> % test \hbox to 10pt to 10pt {x}
>
> \stoptext
>
> compare pdftex and luametatex.
ok. but why does this run fine
\starttext
Test \spaceskip = 1.0pt plus 1pt minus 1.5pt Wolfgang
\stoptext
while this ends in an error message?
\starttext
Test \spaceskip = 1.0pt plus 1pt minus 1.5pt Matilda
\stoptext
Steffen
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Invalid keyword \spaceskip
On 6/26/2021 11:56 PM, Wolfgang Schuster wrote:
Steffen Wolfrum schrieb am 26.06.2021 um 23:38:
Am 26.06.2021 um 22:43 schrieb Wolfgang Schuster
:
Steffen Wolfrum schrieb am 26.06.2021 um 22:26:
PS: with
% engine=luatex
it works fine.
Add \relax after the last skip value, i.e.
\spaceskip = 1pt plus 1pt minus 1.5pt\relax
LMTX allows multiple plus and minus values for a skip value and the M
in Matilda starts the scan for an additional minus value.
Wow, this sounds interesting. Is there an example of how to use
multiple values?
I think the only examples are in mails from Hans. When you set multiple
plus or minus values (as far as i remember) only the last setting is
used and all previous ones are ignored.
Maybe in some article. Anyway, here is an example:
\starttext
test \skip0=10pt plus 10pt minus 10pt plus 20pt
test \skip0=10pt plus 10pt plus 20pt minus 10pt
test \vrule width 10pt height 10pt depth 10pt depth 10pt height 10pt
% test \hbox to 10pt to 10pt {x}
\stoptext
compare pdftex and luametatex.
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
Re: [NTG-context] Invalid keyword \spaceskip
Steffen Wolfrum schrieb am 26.06.2021 um 23:38: Am 26.06.2021 um 22:43 schrieb Wolfgang Schuster : Steffen Wolfrum schrieb am 26.06.2021 um 22:26: PS: with % engine=luatex it works fine. Add \relax after the last skip value, i.e. \spaceskip = 1pt plus 1pt minus 1.5pt\relax LMTX allows multiple plus and minus values for a skip value and the M in Matilda starts the scan for an additional minus value. Wow, this sounds interesting. Is there an example of how to use multiple values? I think the only examples are in mails from Hans. When you set multiple plus or minus values (as far as i remember) only the last setting is used and all previous ones are ignored. Wolfgang ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___
Re: [NTG-context] Invalid keyword \spaceskip
> Am 26.06.2021 um 22:43 schrieb Wolfgang Schuster > : > > Steffen Wolfrum schrieb am 26.06.2021 um 22:26: >> PS: with >> >> % engine=luatex >> >> it works fine. > > Add \relax after the last skip value, i.e. > > \spaceskip = 1pt plus 1pt minus 1.5pt\relax > > LMTX allows multiple plus and minus values for a skip value and the M in > Matilda starts the scan for an additional minus value. Wow, this sounds interesting. Is there an example of how to use multiple values? Thanks for the fix! Steffen ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___
Re: [NTG-context] Invalid keyword \spaceskip
Steffen Wolfrum schrieb am 26.06.2021 um 22:26: PS: with % engine=luatex it works fine. Add \relax after the last skip value, i.e. \spaceskip = 1pt plus 1pt minus 1.5pt\relax LMTX allows multiple plus and minus values for a skip value and the M in Matilda starts the scan for an additional minus value. Wolfgang ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___
Re: [NTG-context] Invalid keyword \spaceskip
PS: with
% engine=luatex
it works fine.
Steffen
> Am 26.06.2021 um 22:12 schrieb Steffen Wolfrum :
>
> This mwe gives the error below:
>
>
> \starttext
>
> {\spaceskip=1.0pt plus1pt minus1.5pt Matilda, 24, 345, 348, 361, 366}
>
> \stoptext
>
>
> Steffen
>
> –––
>
> … $ ~/context-osx-64/tex/texmf-osx-64/bin/mtxrun --script context
> --autogenerate /Users/steffen/Desktop/error_1.tex
>
> resolvers | formats | executing runner 'run luametatex format':
> /Users/steffen/context-osx-64/tex/texmf-osx-64/bin/luametatex
> --jobname="error_1"
> --fmt=/Users/steffen/context-osx-64/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt
>
> --lua=/Users/steffen/context-osx-64/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui
> --c:autogenerate --c:currentrun=1
> --c:fulljobname="/Users/steffen/Desktop/error_1.tex"
> --c:input="/Users/steffen/Desktop/error_1.tex" --c:kindofrun=1
> --c:maxnofruns=9
> --c:texmfbinpath="/Users/steffen/context-osx-64/tex/texmf-osx-64/bin"
> fonts > beware: no fonts are loaded yet, using 'lm mono' in box
> system >
> system > ConTeXt ver: 2021.06.25 22:49 LMTX fmt: 2021.6.26 int:
> english/english
> system >
> system > 'cont-new.mkxl' loaded
> open source > level 1, order 1, name
> '/Users/steffen/context-osx-64/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
> system > beware: some patches loaded from cont-new.mkiv
> close source> level 1, order 1, name
> '/Users/steffen/context-osx-64/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
> system > files > jobname 'error_1', input
> '/Users/steffen/Desktop/error_1', result 'error_1'
> fonts > latin modern fonts are not preloaded
> languages > language 'en' is active
> open source > level 1, order 2, name '/Users/steffen/Desktop/error_1.tex'
> fonts > preloading latin modern fonts (second stage)
> fonts > 'fallback modern-designsize rm 12pt' is loaded
> tex error > tex error on line 4 in file
> /Users/steffen/Desktop/error_1.tex: Valid keyword expected, likely 'minus'
>
> {\spaceskip=1.0pt plus1pt minus1.5pt Ma
> tilda, 24, 345, 348, 361, 366}
> 1
> 2 \starttext
> 3
> 4 >> {\spaceskip=1.0pt plus1pt minus1.5pt Matilda, 24, 345, 348, 361, 366}
> 5
> 6 \stoptext
> You started a keyword but it seems to be an invalid one. The first
> character(s)
> might give you a clue. You might want to quit unwanted lookahead with \relax.
> mtx-context | fatal error: return code: 256
>
>
> ___
> If your question is of interest to others as well, please add an entry to the
> Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
[NTG-context] Invalid keyword \spaceskip
This mwe gives the error below:
\starttext
{\spaceskip=1.0pt plus1pt minus1.5pt Matilda, 24, 345, 348, 361, 366}
\stoptext
Steffen
–––
… $ ~/context-osx-64/tex/texmf-osx-64/bin/mtxrun --script context
--autogenerate /Users/steffen/Desktop/error_1.tex
resolvers | formats | executing runner 'run luametatex format':
/Users/steffen/context-osx-64/tex/texmf-osx-64/bin/luametatex
--jobname="error_1"
--fmt=/Users/steffen/context-osx-64/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt
--lua=/Users/steffen/context-osx-64/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui
--c:autogenerate --c:currentrun=1
--c:fulljobname="/Users/steffen/Desktop/error_1.tex"
--c:input="/Users/steffen/Desktop/error_1.tex" --c:kindofrun=1 --c:maxnofruns=9
--c:texmfbinpath="/Users/steffen/context-osx-64/tex/texmf-osx-64/bin"
fonts > beware: no fonts are loaded yet, using 'lm mono' in box
system >
system > ConTeXt ver: 2021.06.25 22:49 LMTX fmt: 2021.6.26 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/Users/steffen/context-osx-64/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-new.mkiv
close source> level 1, order 1, name
'/Users/steffen/context-osx-64/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > files > jobname 'error_1', input
'/Users/steffen/Desktop/error_1', result 'error_1'
fonts > latin modern fonts are not preloaded
languages > language 'en' is active
open source > level 1, order 2, name '/Users/steffen/Desktop/error_1.tex'
fonts > preloading latin modern fonts (second stage)
fonts > 'fallback modern-designsize rm 12pt' is loaded
tex error > tex error on line 4 in file
/Users/steffen/Desktop/error_1.tex: Valid keyword expected, likely 'minus'
{\spaceskip=1.0pt plus1pt minus1.5pt Ma
tilda, 24, 345, 348, 361, 366}
1
2 \starttext
3
4 >> {\spaceskip=1.0pt plus1pt minus1.5pt Matilda, 24, 345, 348, 361, 366}
5
6 \stoptext
You started a keyword but it seems to be an invalid one. The first character(s)
might give you a clue. You might want to quit unwanted lookahead with \relax.
mtx-context | fatal error: return code: 256
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___
