Re: [NTG-context] Latest beta: reference to items broken in mkiv

[r . ermers]

Hi all,

I kindly ask for your attention for this problem again. I would like subitems 
to appear differently in the reference than they are in the listing:

1. item 1

a. subitem a, reference a

b. item b
c. Item c, reference c

2. Item 2, reference 2 See Item b, 2, 1 above. 


See Item b, 2, 1 above. 

--

Desired result:

See item 1b., 2 1 above.

This is possible in mkii, but not in mkiv it seems. Does anyone know how to 
achieve this?

Robert


A minimal example to play with:

%\setupitemgroup[itemize][1][n,repeat][width=1em]
%\setupitemgroup[itemize][2][a,repeat][width=2em]
%\setupitemgroup[itemize][3][r][width=3em]

\starttext 

\startitemize[n]
\item [ref:1] item 1
\startitemize[a]
\startitem[ref:a]
subitem a, reference a
\stopitem
\item [ref:b] item b
\startitem[ref:c]
Item c, reference c
\stopitem
\stopitemize
\item[ref:2]
Item 2, reference 2
\stopitem
\stopitemize

See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.




> Op 7 feb. 2018, om 14:53 heeft Otared Kavian  > het volgende geschreven:
> 
> Hi Robert,
> 
> Again I answered too quickly… excuse-me!
> If you want to have the subitems appear without the prefix, but references to 
> them contain the number of the item where they appear, I don’t know how to do 
> it.
> My previous message addresses only the separators between the numbers of the 
> items and subitems.
> Sorry… but my belief is that in ConTeXt everything is possible, even if I 
> don’t know how to do it :-)
> 
> Best regards: OK
> 
>> On 7 Feb 2018, at 12:56, r.erm...@hccnet.nl  
>> wrote:
>> 
>> Hi Otared,
>> 
>> Thanks, the solution works to some extend. It yields the following output.
>> 
>> 1. item 1
>> 
>> 1.a.  subitem a, reference a
>> 
>> 1.b.  item b
>> 
>>  1.b.i. A sub-sub item
>> 
>>  1.b.ii. Another sub-sub item, B 1.c. Item c, reference c
>> 
>> 2. Item 2, reference 2
>> 
>> See Item 1.b, see also items 2 and 1 above, as well as the sub-sub item 
>> 1.b.ii. 
>> 
>> 
>> Yet the output I am looking for, and which I had in mkii, is:
>> 1. item 1
>> 
>> a.  subitem a, reference a
>> 
>> b.  item b
>> 
>>  i. A sub-sub item
>> 
>>  ii. Another sub-sub item, B 1.c. Item c, reference c
>> 
>> 2. Item 2, reference 2
>> 
>> 
>> See Item 1.b / 1b, see also items 2 and 1 above, as well as the sub-sub item 
>> 1.b.ii / 1bii. 
>> 
>> 
>> Is this possible?
>> 
>> Regards,
>> 
>> Robert
>> 
>> 
>> 
>> 
>>> Op 7 feb. 2018, om 12:37 heeft Otared Kavian >> > het volgende geschreven:
>>> 
>>> Hi Robert,
>>> 
>>> I think the issue does not come from the version of Context you are using 
>>> but rather from a lack of formatting your itemgroups with the keyword « 
>>> repeat ».
>>> 
>>> I guess what you want to obtain can be achieved with the following example 
>>> below. At least here with either versions of Context I have the output is 
>>> as expected.
>>> 
>>> Best regards: OK
>>> 
>>> %% begin repeat-subitem.tex
>>> \setupitemgroup[itemize][1][n,repeat][width=1em]
>>> \setupitemgroup[itemize][2][a,repeat][width=2em]
>>> \setupitemgroup[itemize][3][r][width=3em]
>>> 
>>> \starttext 
>>> 
>>> \startitemize[n]
>>> \item[ref:1] item 1
>>> \startitemize  
>>> \startitem[ref:a]
>>> subitem a, reference a
>>> \stopitem
>>> \item [ref:b] item b
>>> \startitemize
>>> \item A sub-sub item
>>> \item[ref:subsub-B] Another sub-sub item, B
>>> \stopitemize
>>> \startitem[ref:c]
>>> Item c, reference c
>>> \stopitem
>>> \stopitemize
>>> \startitem[ref:2]
>>> Item 2, reference 2
>>> \stopitem
>>> 
>>> \stopitemize
>>> \blank[big]
>>> 
>>> See \in{Item}[ref:b], see also items \in[ref:2] and \in[ref:1] above, as 
>>> well as the \in{sub-sub item}[ref:subsub-B].
>>> 
>>> \stoptext
>>> %% end repeat-subitem.tex
>>> 
>>> 
>>> 
 On 7 Feb 2018, at 11:46, r.erm...@hccnet.nl  
 wrote:
 
 Hi Wolfgang, Otared and others,
 
 I installed a new standalone:
 
 mtx-context | main context file: 
 /Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
 mtx-context | current version: 2018.02.06 18:11
 
 However, I do not manage to get it going. The minimal example underneath 
 gives the following result:
 1. item 1
 a. subitem a, reference a 
 
 b. item b
 
 c. Item c, reference c
 
 2. Item 2, reference 2 
 
 
 See Item b, 2, 1 above. 
 
 This should be: 
 
 See Item 1b, 2, 1 above.
 
 Regards,
 
 Robert
 
 
 
 \starttext 
 
 \startitemize[n]\starttext 
 
 \startitemize[n]
 \item 

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[r . ermers]

Hi Otared,

Thanks for your time and trouble!.

I had found  \defineseparatorset[none][][]

with the same result: it oppresses the dots.


Yes, I want subitems to appear differently in the reference than they are in 
the listing:

1. item 1
a subitem 
b subitem
2. item 2
a subitem
b subitem

Desired result:

See item 1b and 2a.

Does anyone else know how to achieve this?

Robert



> Op 7 feb. 2018, om 14:53 heeft Otared Kavian  het volgende 
> geschreven:
> 
> Hi Robert,
> 
> Again I answered too quickly… excuse-me!
> If you want to have the subitems appear without the prefix, but references to 
> them contain the number of the item where they appear, I don’t know how to do 
> it.
> My previous message addresses only the separators between the numbers of the 
> items and subitems.
> Sorry… but my belief is that in ConTeXt everything is possible, even if I 
> don’t know how to do it :-)
> 
> Best regards: OK
> 
>> On 7 Feb 2018, at 12:56, r.erm...@hccnet.nl  
>> wrote:
>> 
>> Hi Otared,
>> 
>> Thanks, the solution works to some extend. It yields the following output.
>> 
>> 1. item 1
>> 
>> 1.a.  subitem a, reference a
>> 
>> 1.b.  item b
>> 
>>  1.b.i. A sub-sub item
>> 
>>  1.b.ii. Another sub-sub item, B 1.c. Item c, reference c
>> 
>> 2. Item 2, reference 2
>> 
>> See Item 1.b, see also items 2 and 1 above, as well as the sub-sub item 
>> 1.b.ii. 
>> 
>> 
>> Yet the output I am looking for, and which I had in mkii, is:
>> 1. item 1
>> 
>> a.  subitem a, reference a
>> 
>> b.  item b
>> 
>>  i. A sub-sub item
>> 
>>  ii. Another sub-sub item, B 1.c. Item c, reference c
>> 
>> 2. Item 2, reference 2
>> 
>> 
>> See Item 1.b / 1b, see also items 2 and 1 above, as well as the sub-sub item 
>> 1.b.ii / 1bii. 
>> 
>> 
>> Is this possible?
>> 
>> Regards,
>> 
>> Robert
>> 
>> 
>> 
>> 
>>> Op 7 feb. 2018, om 12:37 heeft Otared Kavian >> > het volgende geschreven:
>>> 
>>> Hi Robert,
>>> 
>>> I think the issue does not come from the version of Context you are using 
>>> but rather from a lack of formatting your itemgroups with the keyword « 
>>> repeat ».
>>> 
>>> I guess what you want to obtain can be achieved with the following example 
>>> below. At least here with either versions of Context I have the output is 
>>> as expected.
>>> 
>>> Best regards: OK
>>> 
>>> %% begin repeat-subitem.tex
>>> \setupitemgroup[itemize][1][n,repeat][width=1em]
>>> \setupitemgroup[itemize][2][a,repeat][width=2em]
>>> \setupitemgroup[itemize][3][r][width=3em]
>>> 
>>> \starttext 
>>> 
>>> \startitemize[n]
>>> \item[ref:1] item 1
>>> \startitemize  
>>> \startitem[ref:a]
>>> subitem a, reference a
>>> \stopitem
>>> \item [ref:b] item b
>>> \startitemize
>>> \item A sub-sub item
>>> \item[ref:subsub-B] Another sub-sub item, B
>>> \stopitemize
>>> \startitem[ref:c]
>>> Item c, reference c
>>> \stopitem
>>> \stopitemize
>>> \startitem[ref:2]
>>> Item 2, reference 2
>>> \stopitem
>>> 
>>> \stopitemize
>>> \blank[big]
>>> 
>>> See \in{Item}[ref:b], see also items \in[ref:2] and \in[ref:1] above, as 
>>> well as the \in{sub-sub item}[ref:subsub-B].
>>> 
>>> \stoptext
>>> %% end repeat-subitem.tex
>>> 
>>> 
>>> 
 On 7 Feb 2018, at 11:46, r.erm...@hccnet.nl  
 wrote:
 
 Hi Wolfgang, Otared and others,
 
 I installed a new standalone:
 
 mtx-context | main context file: 
 /Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
 mtx-context | current version: 2018.02.06 18:11
 
 However, I do not manage to get it going. The minimal example underneath 
 gives the following result:
 1. item 1
 a. subitem a, reference a 
 
 b. item b
 
 c. Item c, reference c
 
 2. Item 2, reference 2 
 
 
 See Item b, 2, 1 above. 
 
 This should be: 
 
 See Item 1b, 2, 1 above.
 
 Regards,
 
 Robert
 
 
 
 \starttext 
 
 \startitemize[n]\starttext 
 
 \startitemize[n]
 \item [ref:1] item 1
 \startitemize[a]
 \startitem[ref:a]
 subitem a, reference a
 \stopitem
 \item [ref:b] item b
 \startitem[ref:c]
 Item c, reference c
 \stopitem
 \stopitemize
 \startitem[ref:2]
 Item 2, reference 2
 \stopitem
 \stopitemize
 
 See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.
 
 
 \stoptext
 
 
> Op 7 feb. 2018, om 11:03 heeft Wolfgang Schuster 
> > het 
> volgende geschreven:
> 
> 
> 
>> 

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[Otared Kavian]

Hi Robert,

Again I answered too quickly… excuse-me!
If you want to have the subitems appear without the prefix, but references to 
them contain the number of the item where they appear, I don’t know how to do 
it.
My previous message addresses only the separators between the numbers of the 
items and subitems.
Sorry… but my belief is that in ConTeXt everything is possible, even if I don’t 
know how to do it :-)

Best regards: OK

> On 7 Feb 2018, at 12:56, r.erm...@hccnet.nl wrote:
> 
> Hi Otared,
> 
> Thanks, the solution works to some extend. It yields the following output.
> 
> 1. item 1
> 
> 1.a.  subitem a, reference a
> 
> 1.b.  item b
> 
>   1.b.i. A sub-sub item
> 
>   1.b.ii. Another sub-sub item, B 1.c. Item c, reference c
> 
> 2. Item 2, reference 2
> 
> See Item 1.b, see also items 2 and 1 above, as well as the sub-sub item 
> 1.b.ii. 
> 
> 
> Yet the output I am looking for, and which I had in mkii, is:
> 1. item 1
> 
> a.  subitem a, reference a
> 
> b.  item b
> 
>   i. A sub-sub item
> 
>   ii. Another sub-sub item, B 1.c. Item c, reference c
> 
> 2. Item 2, reference 2
> 
> 
> See Item 1.b / 1b, see also items 2 and 1 above, as well as the sub-sub item 
> 1.b.ii / 1bii. 
> 
> 
> Is this possible?
> 
> Regards,
> 
> Robert
> 
> 
> 
> 
>> Op 7 feb. 2018, om 12:37 heeft Otared Kavian > > het volgende geschreven:
>> 
>> Hi Robert,
>> 
>> I think the issue does not come from the version of Context you are using 
>> but rather from a lack of formatting your itemgroups with the keyword « 
>> repeat ».
>> 
>> I guess what you want to obtain can be achieved with the following example 
>> below. At least here with either versions of Context I have the output is as 
>> expected.
>> 
>> Best regards: OK
>> 
>> %% begin repeat-subitem.tex
>> \setupitemgroup[itemize][1][n,repeat][width=1em]
>> \setupitemgroup[itemize][2][a,repeat][width=2em]
>> \setupitemgroup[itemize][3][r][width=3em]
>> 
>> \starttext 
>> 
>> \startitemize[n]
>> \item[ref:1] item 1
>>  \startitemize  
>>  \startitem[ref:a]
>>  subitem a, reference a
>>  \stopitem
>>  \item [ref:b] item b
>>  \startitemize
>>  \item A sub-sub item
>>  \item[ref:subsub-B] Another sub-sub item, B
>>  \stopitemize
>>  \startitem[ref:c]
>>  Item c, reference c
>>  \stopitem
>>  \stopitemize
>>  \startitem[ref:2]
>>  Item 2, reference 2
>>  \stopitem
>> 
>> \stopitemize
>> \blank[big]
>> 
>> See \in{Item}[ref:b], see also items \in[ref:2] and \in[ref:1] above, as 
>> well as the \in{sub-sub item}[ref:subsub-B].
>> 
>> \stoptext
>> %% end repeat-subitem.tex
>> 
>> 
>> 
>>> On 7 Feb 2018, at 11:46, r.erm...@hccnet.nl  
>>> wrote:
>>> 
>>> Hi Wolfgang, Otared and others,
>>> 
>>> I installed a new standalone:
>>> 
>>> mtx-context | main context file: 
>>> /Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
>>> mtx-context | current version: 2018.02.06 18:11
>>> 
>>> However, I do not manage to get it going. The minimal example underneath 
>>> gives the following result:
>>> 1. item 1
>>> a. subitem a, reference a 
>>> 
>>> b. item b
>>> 
>>> c. Item c, reference c
>>> 
>>> 2. Item 2, reference 2 
>>> 
>>> 
>>> See Item b, 2, 1 above. 
>>> 
>>> This should be: 
>>> 
>>> See Item 1b, 2, 1 above.
>>> 
>>> Regards,
>>> 
>>> Robert
>>> 
>>> 
>>> 
>>> \starttext 
>>> 
>>> \startitemize[n]\starttext 
>>> 
>>> \startitemize[n]
>>> \item [ref:1] item 1
>>> \startitemize[a]
>>> \startitem[ref:a]
>>> subitem a, reference a
>>> \stopitem
>>> \item [ref:b] item b
>>> \startitem[ref:c]
>>> Item c, reference c
>>> \stopitem
>>> \stopitemize
>>> \startitem[ref:2]
>>> Item 2, reference 2
>>> \stopitem
>>> \stopitemize
>>> 
>>> See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.
>>> 
>>> 
>>> \stoptext
>>> 
>>> 
 Op 7 feb. 2018, om 11:03 heeft Wolfgang Schuster 
 > het 
 volgende geschreven:
 
 
 
> r.erm...@hccnet.nl  7. Februar 2018 um 10:58
> Hi Otared,
> 
> Thanks for your response. In mkii this worked flawlessly.
> 
> I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not work. 
> Could this be because I have item [it:ref] rather than \startitem[it:ref] 
> … \stopitem?
 
 It works for me with \item[] and \startitem[].
 
 
 $ context --version
 
 mtx-context | current version: 2018.02.06 18:11
 
 
 Wolfgang
 ___
 If your question is of interest to others as well, please add an entry to 
 the Wiki!
 

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[Otared Kavian]

Hi Robert,

Sorry I didn’t pay attention to the way you wanted the formatting of sub-items.
If you want to remove the separator between numbers, then you may add the 
following two line after the setups of your itemgroups:

\defineseparatorset[nothing][][]
\setupcounter[itemgroup:itemize][numberseparatorset=nothing]

This removes all the dots between the item sympbols or numbers.

Best regards: OK


> On 7 Feb 2018, at 12:56, r.erm...@hccnet.nl wrote:
> 
> Hi Otared,
> 
> Thanks, the solution works to some extend. It yields the following output.
> 
> 1. item 1
> 
> 1.a.  subitem a, reference a
> 
> 1.b.  item b
> 
>   1.b.i. A sub-sub item
> 
>   1.b.ii. Another sub-sub item, B 1.c. Item c, reference c
> 
> 2. Item 2, reference 2
> 
> See Item 1.b, see also items 2 and 1 above, as well as the sub-sub item 
> 1.b.ii. 
> 
> 
> Yet the output I am looking for, and which I had in mkii, is:
> 1. item 1
> 
> a.  subitem a, reference a
> 
> b.  item b
> 
>   i. A sub-sub item
> 
>   ii. Another sub-sub item, B 1.c. Item c, reference c
> 
> 2. Item 2, reference 2
> 
> 
> See Item 1.b / 1b, see also items 2 and 1 above, as well as the sub-sub item 
> 1.b.ii / 1bii. 
> 
> 
> Is this possible?
> 
> Regards,
> 
> Robert
> 
> 
> 
> 
>> Op 7 feb. 2018, om 12:37 heeft Otared Kavian > > het volgende geschreven:
>> 
>> Hi Robert,
>> 
>> I think the issue does not come from the version of Context you are using 
>> but rather from a lack of formatting your itemgroups with the keyword « 
>> repeat ».
>> 
>> I guess what you want to obtain can be achieved with the following example 
>> below. At least here with either versions of Context I have the output is as 
>> expected.
>> 
>> Best regards: OK
>> 
>> %% begin repeat-subitem.tex
>> \setupitemgroup[itemize][1][n,repeat][width=1em]
>> \setupitemgroup[itemize][2][a,repeat][width=2em]
>> \setupitemgroup[itemize][3][r][width=3em]
>> 
>> \starttext 
>> 
>> \startitemize[n]
>> \item[ref:1] item 1
>>  \startitemize  
>>  \startitem[ref:a]
>>  subitem a, reference a
>>  \stopitem
>>  \item [ref:b] item b
>>  \startitemize
>>  \item A sub-sub item
>>  \item[ref:subsub-B] Another sub-sub item, B
>>  \stopitemize
>>  \startitem[ref:c]
>>  Item c, reference c
>>  \stopitem
>>  \stopitemize
>>  \startitem[ref:2]
>>  Item 2, reference 2
>>  \stopitem
>> 
>> \stopitemize
>> \blank[big]
>> 
>> See \in{Item}[ref:b], see also items \in[ref:2] and \in[ref:1] above, as 
>> well as the \in{sub-sub item}[ref:subsub-B].
>> 
>> \stoptext
>> %% end repeat-subitem.tex
>> 
>> 
>> 
>>> On 7 Feb 2018, at 11:46, r.erm...@hccnet.nl  
>>> wrote:
>>> 
>>> Hi Wolfgang, Otared and others,
>>> 
>>> I installed a new standalone:
>>> 
>>> mtx-context | main context file: 
>>> /Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
>>> mtx-context | current version: 2018.02.06 18:11
>>> 
>>> However, I do not manage to get it going. The minimal example underneath 
>>> gives the following result:
>>> 1. item 1
>>> a. subitem a, reference a 
>>> 
>>> b. item b
>>> 
>>> c. Item c, reference c
>>> 
>>> 2. Item 2, reference 2 
>>> 
>>> 
>>> See Item b, 2, 1 above. 
>>> 
>>> This should be: 
>>> 
>>> See Item 1b, 2, 1 above.
>>> 
>>> Regards,
>>> 
>>> Robert
>>> 
>>> 
>>> 
>>> \starttext 
>>> 
>>> \startitemize[n]\starttext 
>>> 
>>> \startitemize[n]
>>> \item [ref:1] item 1
>>> \startitemize[a]
>>> \startitem[ref:a]
>>> subitem a, reference a
>>> \stopitem
>>> \item [ref:b] item b
>>> \startitem[ref:c]
>>> Item c, reference c
>>> \stopitem
>>> \stopitemize
>>> \startitem[ref:2]
>>> Item 2, reference 2
>>> \stopitem
>>> \stopitemize
>>> 
>>> See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.
>>> 
>>> 
>>> \stoptext
>>> 
>>> 
 Op 7 feb. 2018, om 11:03 heeft Wolfgang Schuster 
 > het 
 volgende geschreven:
 
 
 
> r.erm...@hccnet.nl  7. Februar 2018 um 10:58
> Hi Otared,
> 
> Thanks for your response. In mkii this worked flawlessly.
> 
> I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not work. 
> Could this be because I have item [it:ref] rather than \startitem[it:ref] 
> … \stopitem?
 
 It works for me with \item[] and \startitem[].
 
 
 $ context --version
 
 mtx-context | current version: 2018.02.06 18:11
 
 
 Wolfgang
 ___
 If your question is of interest to others as well, please add an entry to 
 the Wiki!
 
 maillist : 

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[r . ermers]

Hi Otared,

Thanks, the solution works to some extend. It yields the following output.

1. item 1

1.a.  subitem a, reference a

1.b.  item b

1.b.i. A sub-sub item

1.b.ii. Another sub-sub item, B 1.c. Item c, reference c

2. Item 2, reference 2

See Item 1.b, see also items 2 and 1 above, as well as the sub-sub item 1.b.ii. 


Yet the output I am looking for, and which I had in mkii, is:
1. item 1

a.  subitem a, reference a

b.  item b

i. A sub-sub item

ii. Another sub-sub item, B 1.c. Item c, reference c

2. Item 2, reference 2


See Item 1.b / 1b, see also items 2 and 1 above, as well as the sub-sub item 
1.b.ii / 1bii. 


Is this possible?

Regards,

Robert




> Op 7 feb. 2018, om 12:37 heeft Otared Kavian  het volgende 
> geschreven:
> 
> Hi Robert,
> 
> I think the issue does not come from the version of Context you are using but 
> rather from a lack of formatting your itemgroups with the keyword « repeat ».
> 
> I guess what you want to obtain can be achieved with the following example 
> below. At least here with either versions of Context I have the output is as 
> expected.
> 
> Best regards: OK
> 
> %% begin repeat-subitem.tex
> \setupitemgroup[itemize][1][n,repeat][width=1em]
> \setupitemgroup[itemize][2][a,repeat][width=2em]
> \setupitemgroup[itemize][3][r][width=3em]
> 
> \starttext 
> 
> \startitemize[n]
> \item[ref:1] item 1
>   \startitemize  
>   \startitem[ref:a]
>   subitem a, reference a
>   \stopitem
>   \item [ref:b] item b
>   \startitemize
>   \item A sub-sub item
>   \item[ref:subsub-B] Another sub-sub item, B
>   \stopitemize
>   \startitem[ref:c]
>   Item c, reference c
>   \stopitem
>   \stopitemize
>   \startitem[ref:2]
>   Item 2, reference 2
>   \stopitem
> 
> \stopitemize
> \blank[big]
> 
> See \in{Item}[ref:b], see also items \in[ref:2] and \in[ref:1] above, as well 
> as the \in{sub-sub item}[ref:subsub-B].
> 
> \stoptext
> %% end repeat-subitem.tex
> 
> 
> 
>> On 7 Feb 2018, at 11:46, r.erm...@hccnet.nl  
>> wrote:
>> 
>> Hi Wolfgang, Otared and others,
>> 
>> I installed a new standalone:
>> 
>> mtx-context | main context file: 
>> /Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
>> mtx-context | current version: 2018.02.06 18:11
>> 
>> However, I do not manage to get it going. The minimal example underneath 
>> gives the following result:
>> 1. item 1
>> a. subitem a, reference a 
>> 
>> b. item b
>> 
>> c. Item c, reference c
>> 
>> 2. Item 2, reference 2 
>> 
>> 
>> See Item b, 2, 1 above. 
>> 
>> This should be: 
>> 
>> See Item 1b, 2, 1 above.
>> 
>> Regards,
>> 
>> Robert
>> 
>> 
>> 
>> \starttext 
>> 
>> \startitemize[n]\starttext 
>> 
>> \startitemize[n]
>> \item [ref:1] item 1
>> \startitemize[a]
>> \startitem[ref:a]
>> subitem a, reference a
>> \stopitem
>> \item [ref:b] item b
>> \startitem[ref:c]
>> Item c, reference c
>> \stopitem
>> \stopitemize
>> \startitem[ref:2]
>> Item 2, reference 2
>> \stopitem
>> \stopitemize
>> 
>> See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.
>> 
>> 
>> \stoptext
>> 
>> 
>>> Op 7 feb. 2018, om 11:03 heeft Wolfgang Schuster 
>>> > het 
>>> volgende geschreven:
>>> 
>>> 
>>> 
 r.erm...@hccnet.nl  7. Februar 2018 um 10:58
 Hi Otared,
 
 Thanks for your response. In mkii this worked flawlessly.
 
 I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not work. 
 Could this be because I have item [it:ref] rather than \startitem[it:ref] 
 … \stopitem?
>>> 
>>> It works for me with \item[] and \startitem[].
>>> 
>>> 
>>> $ context --version
>>> 
>>> mtx-context | current version: 2018.02.06 18:11
>>> 
>>> 
>>> Wolfgang
>>> ___
>>> If your question is of interest to others as well, please add an entry to 
>>> the Wiki!
>>> 
>>> maillist : ntg-context@ntg.nl  / 
>>> http://www.ntg.nl/mailman/listinfo/ntg-context 
>>> 
>>> webpage  : http://www.pragma-ade.nl  / 
>>> http://context.aanhet.net 
>>> archive  : https://bitbucket.org/phg/context-mirror/commits/ 
>>> 
>>> wiki : http://contextgarden.net 
>>> ___
>> 
>> ___
>> If your question is of interest to others as well, please 

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[Otared Kavian]

Hi Robert,

I think the issue does not come from the version of Context you are using but 
rather from a lack of formatting your itemgroups with the keyword « repeat ».

I guess what you want to obtain can be achieved with the following example 
below. At least here with either versions of Context I have the output is as 
expected.

Best regards: OK

%% begin repeat-subitem.tex
\setupitemgroup[itemize][1][n,repeat][width=1em]
\setupitemgroup[itemize][2][a,repeat][width=2em]
\setupitemgroup[itemize][3][r][width=3em]

\starttext 

\startitemize[n]
\item[ref:1] item 1
\startitemize  
\startitem[ref:a]
subitem a, reference a
\stopitem
\item [ref:b] item b
\startitemize
\item A sub-sub item
\item[ref:subsub-B] Another sub-sub item, B
\stopitemize
\startitem[ref:c]
Item c, reference c
\stopitem
\stopitemize
\startitem[ref:2]
Item 2, reference 2
\stopitem

\stopitemize
\blank[big]

See \in{Item}[ref:b], see also items \in[ref:2] and \in[ref:1] above, as well 
as the \in{sub-sub item}[ref:subsub-B].

\stoptext
%% end repeat-subitem.tex



> On 7 Feb 2018, at 11:46, r.erm...@hccnet.nl wrote:
> 
> Hi Wolfgang, Otared and others,
> 
> I installed a new standalone:
> 
> mtx-context | main context file: 
> /Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
> mtx-context | current version: 2018.02.06 18:11
> 
> However, I do not manage to get it going. The minimal example underneath 
> gives the following result:
> 1. item 1
> a. subitem a, reference a 
> 
> b. item b
> 
> c. Item c, reference c
> 
> 2. Item 2, reference 2 
> 
> 
> See Item b, 2, 1 above. 
> 
> This should be: 
> 
> See Item 1b, 2, 1 above.
> 
> Regards,
> 
> Robert
> 
> 
> 
> \starttext 
> 
> \startitemize[n]\starttext 
> 
> \startitemize[n]
> \item [ref:1] item 1
> \startitemize[a]
> \startitem[ref:a]
> subitem a, reference a
> \stopitem
> \item [ref:b] item b
> \startitem[ref:c]
> Item c, reference c
> \stopitem
> \stopitemize
> \startitem[ref:2]
> Item 2, reference 2
> \stopitem
> \stopitemize
> 
> See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.
> 
> 
> \stoptext
> 
> 
>> Op 7 feb. 2018, om 11:03 heeft Wolfgang Schuster 
>> > het 
>> volgende geschreven:
>> 
>> 
>> 
>>> r.erm...@hccnet.nl  7. Februar 2018 um 10:58
>>> Hi Otared,
>>> 
>>> Thanks for your response. In mkii this worked flawlessly.
>>> 
>>> I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not work. 
>>> Could this be because I have item [it:ref] rather than \startitem[it:ref] … 
>>> \stopitem?
>> 
>> It works for me with \item[] and \startitem[].
>> 
>> 
>> $ context --version
>> 
>> mtx-context | current version: 2018.02.06 18:11
>> 
>> 
>> Wolfgang
>> ___
>> If your question is of interest to others as well, please add an entry to 
>> the Wiki!
>> 
>> maillist : ntg-context@ntg.nl  / 
>> http://www.ntg.nl/mailman/listinfo/ntg-context 
>> 
>> webpage  : http://www.pragma-ade.nl  / 
>> http://context.aanhet.net 
>> archive  : https://bitbucket.org/phg/context-mirror/commits/ 
>> 
>> wiki : http://contextgarden.net 
>> ___
> 
> ___
> If your question is of interest to others as well, please add an entry to the 
> Wiki!
> 
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
> archive  : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___

___
If your question is of interest to others as well, please add an entry to the 
Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[r . ermers]

Hi Wolfgang, Otared and others,

I installed a new standalone:

mtx-context | main context file: 
/Applications/ContextStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2018.02.06 18:11

However, I do not manage to get it going. The minimal example underneath gives 
the following result:
1. item 1
a. subitem a, reference a 

b. item b

c. Item c, reference c

2. Item 2, reference 2 

See Item b, 2, 1 above. 

This should be: 

See Item 1b, 2, 1 above.

Regards,

Robert



\starttext 

\startitemize[n]\starttext 

\startitemize[n]
\item [ref:1] item 1
\startitemize[a]
\startitem[ref:a]
subitem a, reference a
\stopitem
\item [ref:b] item b
\startitem[ref:c]
Item c, reference c
\stopitem
\stopitemize
\startitem[ref:2]
Item 2, reference 2
\stopitem
\stopitemize

See \in{Item}[ref:b], \in[ref:2], \in[ref:1] above.


\stoptext


> Op 7 feb. 2018, om 11:03 heeft Wolfgang Schuster 
>  het volgende geschreven:
> 
> 
> 
>> r.erm...@hccnet.nl  7. Februar 2018 um 10:58
>> Hi Otared,
>> 
>> Thanks for your response. In mkii this worked flawlessly.
>> 
>> I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not work. 
>> Could this be because I have item [it:ref] rather than \startitem[it:ref] … 
>> \stopitem?
> 
> It works for me with \item[] and \startitem[].
> 
> 
> $ context --version
> 
> mtx-context | current version: 2018.02.06 18:11
> 
> 
> Wolfgang
> ___
> If your question is of interest to others as well, please add an entry to the 
> Wiki!
> 
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
> archive  : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___

___
If your question is of interest to others as well, please add an entry to the 
Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[Wolfgang Schuster]

r.erm...@hccnet.nl 
7. Februar 2018 um 10:58
Hi Otared,

Thanks for your response. In mkii this worked flawlessly.

I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not 
work. Could this be because I have item [it:ref] rather than 
\startitem[it:ref] … \stopitem?


It works for me with \item[] and \startitem[].


$ context --version

mtx-context | current version: 2018.02.06 18:11


Wolfgang
___
If your question is of interest to others as well, please add an entry to the 
Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___

Re: [NTG-context] Latest beta: reference to items broken in mkiv

[r . ermers]

Hi Otared,

Thanks for your response. In mkii this worked flawlessly.

I tried it in mkiv Texlive too (2017.05.15 21:48), but it does not work. Could 
this be because I have item [it:ref] rather than \startitem[it:ref] … \stopitem?

Anyway, I will install a new standalone - on my Mac (no TeXShop).

Robert


> Op 7 feb. 2018, om 10:47 heeft Otared Kavian  het volgende 
> geschreven:
> 
> Hi Robert,
> 
> Indeed the bug has been fixed: the reference to items works fine in all 
> recent Context betas, and also with the version from TeXLive 2017 (version 
> 2017.05.15 21:48).
> 
> I don’t have the current version 2017.07.17 00:20 in order to test the 
> example your are mentionning, but if your current version of Context comes 
> from TeXLive, maybe you can update it. Otherwise, the installation of a 
> standalone version is not that complicated and it is really worth it.
> If you are using MacOS X and TeXShop, in case you would need help to install 
> a standalone version do not hesitate to ask me.
> 
> Best regards: Otared K.
> 
>> On 7 Feb 2018, at 09:38, r.erm...@hccnet.nl wrote:
>> 
>> Hi Otared,
>> 
>> I wonder if the problem with the referencing to items you signalled has been 
>> solved in a later version (see text below). I am running into the same 
>> issue. My context version: current version: 2017.07.17 00:20.
>> 
>> If it is not, I will do with a makeshift solution for now; if the problem 
>> has been handled, I consider installing a new standalone. (Installing a 
>> standalone is usally a bit of a fuzz.)
>> 
>> Thanks in advance for your reply,
>> 
>> Best wishes,
>> 
>> Robert
>> 
>> Otared Kavian Wed, 01 Apr 2015 01:23:29 -0700
>> 
>> Hi Hans,
>> 
>> It seems that referencing to items is broken in the latest beta mkiv: for 
>> example in the example below the command
>>\in{Item}[ref:2]
>> does not show item number 2.
>> However it works fine in mkii and previous releases.
>> Best regards: OK
>> PS: a minimal example follows
>> %%% begin ref-item-broken.tex
>> \starttext 
>> 
>> \startitemize[n]
>> 
>> \startitem[ref:1]
>> Item 1, reference 1
>> \stopitem
>> 
>> \startitem[ref:2]
>> Item 2, reference 2
>> \stopitem
>> 
>> \startitem[ref:3]
>> Item 3, reference 3
>> \stopitem
>> 
>> \stopitemize
>> 
>> See \in{Item}[ref:2] above.
>> 
>> \stoptext
>> %%% end ref-item-broken.tex
>> 
>> 
> 

___
If your question is of interest to others as well, please add an entry to the 
Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___

[NTG-context] Latest beta: reference to items broken in mkiv

[Otared Kavian]

Hi Hans,

It seems that referencing to items is broken in the latest beta mkiv: for 
example in the example below the command
\in{Item}[ref:2]
does not show item number 2.
However it works fine in mkii and previous releases.
Best regards: OK
PS: a minimal example follows
%%% begin ref-item-broken.tex
\starttext 

\startitemize[n]

\startitem[ref:1]
Item 1, reference 1
\stopitem

\startitem[ref:2]
Item 2, reference 2
\stopitem

\startitem[ref:3]
Item 3, reference 3
\stopitem

\stopitemize

See \in{Item}[ref:2] above.

\stoptext
%%% end ref-item-broken.tex
___
If your question is of interest to others as well, please add an entry to the 
Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://tex.aanhet.net
archive  : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___