RE: Inbound and Outbound replication on DC

[Brian Desmond]

That makes sense - I've not personally experienced that situation fortunately.

Thanks,
Brian Desmond
br...@briandesmond.com

c - 312.731.3132

From: Christopher Bodnar [mailto:christopher_bod...@glic.com]
Sent: Thursday, September 10, 2009 2:00 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

I just ran across this:

http://support.microsoft.com/kb/875495

According to this article it looks like the server will automatically disable 
inbound and outbound replication under certain circumstances if it detects a 
USN rollback. Which can be seen by event IDs 1113 and 1115.




Chris Bodnar, MCSE
Sr. Systems Engineer
Distributed Systems Service Delivery - Intel Services
Guardian Life Insurance Company of America
Email: christopher_bod...@glic.com<mailto:christopher_bod...@glic.com>
Phone: 610-807-6459
Fax: 610-807-6003


From: br...@briandesmond.com [mailto:br...@briandesmond.com]
Sent: Thursday, September 10, 2009 2:16 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

I've only ever seen this set when someone uses repadmin (or something direct 
like adsiedit) to set the flag on the connection object.

Time delta wouldn't do this.

Thanks,
Brian Desmond
br...@briandesmond.com<mailto:br...@briandesmond.com>

c - 312.731.3132

From: Don Guyer [mailto:don.gu...@prufoxroach.com]
Sent: Thursday, September 10, 2009 12:44 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

Maybe the times got so far out of whack (I believe when it hits 5 minutes it 
starts causing issues) that replication disabled itself?

Don Guyer
Systems Engineer - Information Services
Prudential, Fox & Roach/Trident Group
431 W. Lancaster Avenue
Devon, PA 19333
Direct: (610) 993-3299
Fax: (610) 650-5306
don.gu...@prufoxroach.com<mailto:don.gu...@prufoxroach.com>

From: Christopher Bodnar [mailto:christopher_bod...@glic.com]
Sent: Thursday, September 10, 2009 11:07 AM
To: NT System Admin Issues
Subject: Inbound and Outbound replication on DC

Had an issue with a DC in a remote site. It ended up being that Inbound and 
Outbound replication on the DC was disabled which was shown by REPADMIN 
/SHOWREPS /V:

DC Options: DISABLE_INBOUND_REPL DISABLE_OUTBOUND_REPL

I enabled them and that seems to have fixed the problem. From what I am told by 
the onsite admin he was having some kind of issue with this DC yesterday and 
the server was eventually rebooted. The Netlogon and the Windows Time service 
didn't start after reboot and were manually started this morning around 6am (~9 
hours later). My question is, if these 2 services didn't start. Would that 
cause something to flip the replication status to disabled? I don't think so, 
but I wanted to get the thoughts of the group here.

Thanks,



Chris








This message, and any attachments to it, may contain information that is 
privileged, confidential, and exempt from disclosure under applicable law. If 
the reader of this message is not the intended recipient, you are notified that 
any use, dissemination, distribution, copying, or communication of this message 
is strictly prohibited. If you have received this message in error, please 
notify the sender immediately by return e-mail and delete the message and any 
attachments. Thank you.















This message, and any attachments to it, may contain information that is 
privileged, confidential, and exempt from disclosure under applicable law. If 
the reader of this message is not the intended recipient, you are notified that 
any use, dissemination, distribution, copying, or communication of this message 
is strictly prohibited. If you have received this message in error, please 
notify the sender immediately by return e-mail and delete the message and any 
attachments. Thank you.

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

RE: Inbound and Outbound replication on DC

[Free, Bob]

I've seen it implicated in certain situations like a USN rollback or
very serious repl problems but it's all anecdotal, the only time I
personally observed the flag being set is when I had done it myself. I
have seen Jorge mention it so that's fairly authoritative for me.

 

From: Brian Desmond [mailto:br...@briandesmond.com] 
Sent: Thursday, September 10, 2009 11:16 AM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

 

I've only ever seen this set when someone uses repadmin (or something
direct like adsiedit) to set the flag on the connection object.

 

Time delta wouldn't do this.

 

Thanks,

Brian Desmond

br...@briandesmond.com

 

c - 312.731.3132

 

From: Don Guyer [mailto:don.gu...@prufoxroach.com] 
Sent: Thursday, September 10, 2009 12:44 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

 

Maybe the times got so far out of whack (I believe when it hits 5
minutes it starts causing issues) that replication disabled itself?

 

Don Guyer

Systems Engineer - Information Services

Prudential, Fox & Roach/Trident Group

431 W. Lancaster Avenue

Devon, PA 19333

Direct: (610) 993-3299

Fax: (610) 650-5306

don.gu...@prufoxroach.com

 

From: Christopher Bodnar [mailto:christopher_bod...@glic.com] 
Sent: Thursday, September 10, 2009 11:07 AM
To: NT System Admin Issues
Subject: Inbound and Outbound replication on DC

 

Had an issue with a DC in a remote site. It ended up being that Inbound
and Outbound replication on the DC was disabled which was shown by
REPADMIN /SHOWREPS /V:

 

DC Options: DISABLE_INBOUND_REPL DISABLE_OUTBOUND_REPL

 

I enabled them and that seems to have fixed the problem. From what I am
told by the onsite admin he was having some kind of issue with this DC
yesterday and the server was eventually rebooted. The Netlogon and the
Windows Time service didn't start after reboot and were manually started
this morning around 6am (~9 hours later). My question is, if these 2
services didn't start. Would that cause something to flip the
replication status to disabled? I don't think so, but I wanted to get
the thoughts of the group here.

 

Thanks,

 

 

Chris

 

 

 



This message, and any attachments to it, may contain information that is
privileged, confidential, and exempt from disclosure under applicable
law. If the reader of this message is not the intended recipient, you
are notified that any use, dissemination, distribution, copying, or
communication of this message is strictly prohibited. If you have
received this message in error, please notify the sender immediately by
return e-mail and delete the message and any attachments. Thank you. 

 

 

 

 

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

RE: Inbound and Outbound replication on DC

[Christopher Bodnar]

I just ran across this:

 

http://support.microsoft.com/kb/875495

 

According to this article it looks like the server will automatically
disable inbound and outbound replication under certain circumstances if it
detects a USN rollback. Which can be seen by event IDs 1113 and 1115. 

 

 

 

Chris Bodnar, MCSE
Sr. Systems Engineer
Distributed Systems Service Delivery - Intel Services
Guardian Life Insurance Company of America
Email: christopher_bod...@glic.com
Phone: 610-807-6459
Fax: 610-807-6003

  _  

From: br...@briandesmond.com [mailto:br...@briandesmond.com] 
Sent: Thursday, September 10, 2009 2:16 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

 

I've only ever seen this set when someone uses repadmin (or something
direct like adsiedit) to set the flag on the connection object.

 

Time delta wouldn't do this.

 

Thanks,

Brian Desmond

br...@briandesmond.com

 

c - 312.731.3132

 

From: Don Guyer [mailto:don.gu...@prufoxroach.com] 
Sent: Thursday, September 10, 2009 12:44 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

 

Maybe the times got so far out of whack (I believe when it hits 5 minutes
it starts causing issues) that replication disabled itself?

 

Don Guyer

Systems Engineer - Information Services

Prudential, Fox & Roach/Trident Group

431 W. Lancaster Avenue

Devon, PA 19333

Direct: (610) 993-3299

Fax: (610) 650-5306

don.gu...@prufoxroach.com

 

From: Christopher Bodnar [mailto:christopher_bod...@glic.com] 
Sent: Thursday, September 10, 2009 11:07 AM
To: NT System Admin Issues
Subject: Inbound and Outbound replication on DC

 

Had an issue with a DC in a remote site. It ended up being that Inbound
and Outbound replication on the DC was disabled which was shown by
REPADMIN /SHOWREPS /V:

 

DC Options: DISABLE_INBOUND_REPL DISABLE_OUTBOUND_REPL

 

I enabled them and that seems to have fixed the problem. From what I am
told by the onsite admin he was having some kind of issue with this DC
yesterday and the server was eventually rebooted. The Netlogon and the
Windows Time service didn't start after reboot and were manually started
this morning around 6am (~9 hours later). My question is, if these 2
services didn't start. Would that cause something to flip the replication
status to disabled? I don't think so, but I wanted to get the thoughts of
the group here.

 

Thanks,

 

 

Chris

 

 

 
  _  


This message, and any attachments to it, may contain information that is
privileged, confidential, and exempt from disclosure under applicable law.
If the reader of this message is not the intended recipient, you are
notified that any use, dissemination, distribution, copying, or
communication of this message is strictly prohibited. If you have received
this message in error, please notify the sender immediately by return
e-mail and delete the message and any attachments. Thank you. 

 

 

 

 



-
This message, and any attachments to it, may contain information
that is privileged, confidential, and exempt from disclosure under
applicable law.  If the reader of this message is not the intended
recipient, you are notified that any use, dissemination,
distribution, copying, or communication of this message is strictly
prohibited.  If you have received this message in error, please
notify the sender immediately by return e-mail and delete the
message and any attachments.  Thank you.
~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

RE: Inbound and Outbound replication on DC

[Don Guyer]

Good to know.

 

J

 

Don Guyer

Systems Engineer - Information Services

Prudential, Fox & Roach/Trident Group

431 W. Lancaster Avenue

Devon, PA 19333

Direct: (610) 993-3299

Fax: (610) 650-5306

don.gu...@prufoxroach.com <mailto:don.gu...@prufoxroach.com> 

 

From: Brian Desmond [mailto:br...@briandesmond.com] 
Sent: Thursday, September 10, 2009 2:16 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

 

I've only ever seen this set when someone uses repadmin (or something
direct like adsiedit) to set the flag on the connection object.

 

Time delta wouldn't do this.

 

Thanks,

Brian Desmond

br...@briandesmond.com

 

c - 312.731.3132

 

From: Don Guyer [mailto:don.gu...@prufoxroach.com] 
Sent: Thursday, September 10, 2009 12:44 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

 

Maybe the times got so far out of whack (I believe when it hits 5
minutes it starts causing issues) that replication disabled itself?

 

Don Guyer

Systems Engineer - Information Services

Prudential, Fox & Roach/Trident Group

431 W. Lancaster Avenue

Devon, PA 19333

Direct: (610) 993-3299

Fax: (610) 650-5306

don.gu...@prufoxroach.com

 

From: Christopher Bodnar [mailto:christopher_bod...@glic.com] 
Sent: Thursday, September 10, 2009 11:07 AM
To: NT System Admin Issues
Subject: Inbound and Outbound replication on DC

 

Had an issue with a DC in a remote site. It ended up being that Inbound
and Outbound replication on the DC was disabled which was shown by
REPADMIN /SHOWREPS /V:

 

DC Options: DISABLE_INBOUND_REPL DISABLE_OUTBOUND_REPL

 

I enabled them and that seems to have fixed the problem. From what I am
told by the onsite admin he was having some kind of issue with this DC
yesterday and the server was eventually rebooted. The Netlogon and the
Windows Time service didn't start after reboot and were manually started
this morning around 6am (~9 hours later). My question is, if these 2
services didn't start. Would that cause something to flip the
replication status to disabled? I don't think so, but I wanted to get
the thoughts of the group here.

 

Thanks,

 

 

Chris

 

 

 



This message, and any attachments to it, may contain information that is
privileged, confidential, and exempt from disclosure under applicable
law. If the reader of this message is not the intended recipient, you
are notified that any use, dissemination, distribution, copying, or
communication of this message is strictly prohibited. If you have
received this message in error, please notify the sender immediately by
return e-mail and delete the message and any attachments. Thank you. 

 

 

 

 

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

RE: Inbound and Outbound replication on DC

[Brian Desmond]

I've only ever seen this set when someone uses repadmin (or something direct 
like adsiedit) to set the flag on the connection object.

Time delta wouldn't do this.

Thanks,
Brian Desmond
br...@briandesmond.com

c - 312.731.3132

From: Don Guyer [mailto:don.gu...@prufoxroach.com]
Sent: Thursday, September 10, 2009 12:44 PM
To: NT System Admin Issues
Subject: RE: Inbound and Outbound replication on DC

Maybe the times got so far out of whack (I believe when it hits 5 minutes it 
starts causing issues) that replication disabled itself?

Don Guyer
Systems Engineer - Information Services
Prudential, Fox & Roach/Trident Group
431 W. Lancaster Avenue
Devon, PA 19333
Direct: (610) 993-3299
Fax: (610) 650-5306
don.gu...@prufoxroach.com<mailto:don.gu...@prufoxroach.com>

From: Christopher Bodnar [mailto:christopher_bod...@glic.com]
Sent: Thursday, September 10, 2009 11:07 AM
To: NT System Admin Issues
Subject: Inbound and Outbound replication on DC

Had an issue with a DC in a remote site. It ended up being that Inbound and 
Outbound replication on the DC was disabled which was shown by REPADMIN 
/SHOWREPS /V:

DC Options: DISABLE_INBOUND_REPL DISABLE_OUTBOUND_REPL

I enabled them and that seems to have fixed the problem. From what I am told by 
the onsite admin he was having some kind of issue with this DC yesterday and 
the server was eventually rebooted. The Netlogon and the Windows Time service 
didn't start after reboot and were manually started this morning around 6am (~9 
hours later). My question is, if these 2 services didn't start. Would that 
cause something to flip the replication status to disabled? I don't think so, 
but I wanted to get the thoughts of the group here.

Thanks,



Chris








This message, and any attachments to it, may contain information that is 
privileged, confidential, and exempt from disclosure under applicable law. If 
the reader of this message is not the intended recipient, you are notified that 
any use, dissemination, distribution, copying, or communication of this message 
is strictly prohibited. If you have received this message in error, please 
notify the sender immediately by return e-mail and delete the message and any 
attachments. Thank you.





~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

RE: Inbound and Outbound replication on DC

[Don Guyer]

Maybe the times got so far out of whack (I believe when it hits 5
minutes it starts causing issues) that replication disabled itself?

 

Don Guyer

Systems Engineer - Information Services

Prudential, Fox & Roach/Trident Group

431 W. Lancaster Avenue

Devon, PA 19333

Direct: (610) 993-3299

Fax: (610) 650-5306

don.gu...@prufoxroach.com  

 

From: Christopher Bodnar [mailto:christopher_bod...@glic.com] 
Sent: Thursday, September 10, 2009 11:07 AM
To: NT System Admin Issues
Subject: Inbound and Outbound replication on DC

 

Had an issue with a DC in a remote site. It ended up being that Inbound
and Outbound replication on the DC was disabled which was shown by
REPADMIN /SHOWREPS /V:

 

DC Options: DISABLE_INBOUND_REPL DISABLE_OUTBOUND_REPL

 

I enabled them and that seems to have fixed the problem. From what I am
told by the onsite admin he was having some kind of issue with this DC
yesterday and the server was eventually rebooted. The Netlogon and the
Windows Time service didn't start after reboot and were manually started
this morning around 6am (~9 hours later). My question is, if these 2
services didn't start. Would that cause something to flip the
replication status to disabled? I don't think so, but I wanted to get
the thoughts of the group here.

 

Thanks,

 

 

Chris

 

 

 



This message, and any attachments to it, may contain information that is
privileged, confidential, and exempt from disclosure under applicable
law. If the reader of this message is not the intended recipient, you
are notified that any use, dissemination, distribution, copying, or
communication of this message is strictly prohibited. If you have
received this message in error, please notify the sender immediately by
return e-mail and delete the message and any attachments. Thank you. 


~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~   ~