Re: [Numpy-discussion] Greek Letters
Andrew Straw wrote: Here's one that seems like it might work, but I haven't tried it yet: http://software.jessies.org/terminator Now if only there was a decent terminal emulator for Windows that didn't use cygwin... -Chris -- Christopher Barker, Ph.D. Oceanographer Emergency Response Division NOAA/NOS/ORR(206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception [EMAIL PROTECTED] ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
[Numpy-discussion] Greek Letters
Hello all, I was wondering how I could print the chi-squared symbol in python. I have been looking at the Unicode docs, but I figured I would ask for assistance here while I delve into it. Thanks for any help in advance. Mark Janikas Product Engineer ESRI, Geoprocessing 380 New York St. Redlands, CA 92373 909-793-2853 (2563) [EMAIL PROTECTED] ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
Re: [Numpy-discussion] Greek Letters
I have found that the python 'unicode name' escape sequence, combined with the canonical list of unicode names ( http://unicode.org/Public/ UNIDATA/NamesList.txt ), is a good way of getting the symbols you want and still keeping the python code legible. From the above list, we see that the symbol name we want is GREEK SMALL LETTER CHI, so: chi = u'\N{GREEK SMALL LETTER CHI}' will do the trick. For chi^2, use: chi2 = u'\N{GREEK SMALL LETTER CHI}\N{SUPERSCRIPT TWO}' Note that to print these characters, we usually need to encode them somehow. My terminal supports UTF-8, so the following works for me: import codecs print codecs.encode(chi2, 'utf8') giving (if your mail reader supports utf8 and mine encodes it properly...): χ² Zach Pincus Program in Biomedical Informatics and Department of Biochemistry Stanford University School of Medicine On Feb 20, 2007, at 3:56 PM, Mark Janikas wrote: Hello all, I was wondering how I could print the chi-squared symbol in python. I have been looking at the Unicode docs, but I figured I would ask for assistance here while I delve into it. Thanks for any help in advance. Mark Janikas Product Engineer ESRI, Geoprocessing 380 New York St. Redlands, CA 92373 909-793-2853 (2563) [EMAIL PROTECTED] ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
Re: [Numpy-discussion] Greek Letters
Mark Janikas wrote: Hello all, I was wondering how I could print the chi-squared symbol in python. I have been looking at the Unicode docs, but I figured I would ask for assistance here while I delve into it. Thanks for any help in advance. Print it where? To the terminal (which one?)? In HTML? With some GUI? Assuming that you have a Unicode-capable terminal, you can find out the encoding it uses by looking at sys.stdout.encoding. Encode your Unicode string with that encoding, and print it. E.g., I use iTerm on OS X and set it to use UTF-8 as the encoding: In [5]: import sys In [6]: sys.stdout.encoding Out[6]: 'UTF-8' In [7]: print u'\u03a7\u00b2'.encode(sys.stdout.encoding) Χ² -- Robert Kern I have come to believe that the whole world is an enigma, a harmless enigma that is made terrible by our own mad attempt to interpret it as though it had an underlying truth. -- Umberto Eco ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
Re: [Numpy-discussion] Greek Letters
Thanks for all the info. That website with all the codes is great. MJ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zachary Pincus Sent: Tuesday, February 20, 2007 4:18 PM To: Discussion of Numerical Python Subject: Re: [Numpy-discussion] Greek Letters I have found that the python 'unicode name' escape sequence, combined with the canonical list of unicode names ( http://unicode.org/Public/ UNIDATA/NamesList.txt ), is a good way of getting the symbols you want and still keeping the python code legible. From the above list, we see that the symbol name we want is GREEK SMALL LETTER CHI, so: chi = u'\N{GREEK SMALL LETTER CHI}' will do the trick. For chi^2, use: chi2 = u'\N{GREEK SMALL LETTER CHI}\N{SUPERSCRIPT TWO}' Note that to print these characters, we usually need to encode them somehow. My terminal supports UTF-8, so the following works for me: import codecs print codecs.encode(chi2, 'utf8') giving (if your mail reader supports utf8 and mine encodes it properly...): χ² Zach Pincus Program in Biomedical Informatics and Department of Biochemistry Stanford University School of Medicine On Feb 20, 2007, at 3:56 PM, Mark Janikas wrote: Hello all, I was wondering how I could print the chi-squared symbol in python. I have been looking at the Unicode docs, but I figured I would ask for assistance here while I delve into it. Thanks for any help in advance. Mark Janikas Product Engineer ESRI, Geoprocessing 380 New York St. Redlands, CA 92373 909-793-2853 (2563) [EMAIL PROTECTED] ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
Re: [Numpy-discussion] Greek Letters
Oh. I am using CygWin, and the website I just went to: http://www.cygwin.com/faq/faq_3.html stated that: The short answer is that Cygwin is not Unicode-aware Not sure if this is going to apply to python in general, but I suspect it will. Ugh, I dislike Windows a lot, but it pays the bills. The interesting thing to note is that the print out to gui interface is 'UTF-8' so it works. It just wont work on my terminal where I do all of my testing. I might just have to put a try statement in and put a chi-square in the except. MJ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Janikas Sent: Tuesday, February 20, 2007 5:16 PM To: Discussion of Numerical Python Subject: Re: [Numpy-discussion] Greek Letters Thanks Robert but alas, I get. import sys sys.stdout.encoding 'cp437' print u'\u03a7\u00b2'.encode(sys.stdout.encoding) Traceback (most recent call last): File stdin, line 1, in ? File C:\Python24\lib\encodings\cp437.py, line 18, in encode return codecs.charmap_encode(input,errors,encoding_map) UnicodeEncodeError: 'charmap' codec can't encode character u'\u03a7' in position 0: character maps to undefined Ill keep at it please let me know if you have any solutions Thanks again, MJ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Kern Sent: Tuesday, February 20, 2007 4:20 PM To: Discussion of Numerical Python Subject: Re: [Numpy-discussion] Greek Letters Mark Janikas wrote: Hello all, I was wondering how I could print the chi-squared symbol in python. I have been looking at the Unicode docs, but I figured I would ask for assistance here while I delve into it. Thanks for any help in advance. Print it where? To the terminal (which one?)? In HTML? With some GUI? Assuming that you have a Unicode-capable terminal, you can find out the encoding it uses by looking at sys.stdout.encoding. Encode your Unicode string with that encoding, and print it. E.g., I use iTerm on OS X and set it to use UTF-8 as the encoding: In [5]: import sys In [6]: sys.stdout.encoding Out[6]: 'UTF-8' In [7]: print u'\u03a7\u00b2'.encode(sys.stdout.encoding) Χ² -- Robert Kern I have come to believe that the whole world is an enigma, a harmless enigma that is made terrible by our own mad attempt to interpret it as though it had an underlying truth. -- Umberto Eco ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
Re: [Numpy-discussion] Greek Letters
On Tue, Feb 20, 2007 at 05:29:25PM -0800, Mark Janikas wrote: Oh. I am using CygWin, and the website I just went to: http://www.cygwin.com/faq/faq_3.html stated that: The short answer is that Cygwin is not Unicode-aware Not sure if this is going to apply to python in general, but I suspect it will. Ugh, I dislike Windows a lot, but it pays the bills. Actually you pay Bill :) Maybe try the free vmplayer with a linux session? Cheers Stéfan ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion
Re: [Numpy-discussion] Greek Letters
Robert Kern wrote: On Windows, you may be out of luck. I don't know of any fully-Unicode-capable terminal. The lack of a decent console application is one of the most problematic issues I face whenever attempting to do serious programming in Windows. I wish I knew of a better terminal program. Here's one that seems like it might work, but I haven't tried it yet: http://software.jessies.org/terminator ___ Numpy-discussion mailing list Numpy-discussion@scipy.org http://projects.scipy.org/mailman/listinfo/numpy-discussion