Citeren Vlad n...@wolf.umail.net:
I downgraded back to 2.4.3, configured nut to use megatec_usb again,
and it started working again.
However, it seems strange that I cannot use the latest version.
This is not strange at all. We have reworked this driver core and
could not find people with access to these device and willing to test
this. Note that blazer_usb has been in the stable version since 2.4.0
was released and have urged people to switch over to this one. We have
had no reports that the subdriver that is used by this series of UPS
devices was broken. In that case, there is nothing more we can do than
to switch to the new driver and see what happens.
We've had some changes after 2.6.0 was released in this driver, so you
could try if upgrading to that helps. There are some more changes
underway, but due to the lack of help we're getting from the userbase,
this is put on the back burner (without people volunteering to test
changes, there is no point in putting effort in it). You could help us
here by running the development version for this driver and report
back your results, since we will need testing from as many different
flavors of the krauler series of devices as possible (USB ID's
0001: and :).
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
