Arjen de Korte wrote:
Citeren Vedran Furač vedr...@vedranf.mine.nu:
NUT recently stopped working on my debian. I'm not sure which upgrade
broke it.
From which version did you upgrade it?
Current version is 2.4.1 to which I upgraded few months ago, but I think
it worked until recently (few weeks). Maybe upgrade of some other
package broke it.
Where is megatec-mustek file?
It should be created by the driver, which apparently isn't running.
Either it isn't started at all, fails to detect the UPS or isn't
running with the proper permissions.
Please post the output of
/path/to/megatec -a mustek -D
# /lib/nut/megatec -a mustek -D
Network UPS Tools - Megatec protocol driver 1.6 (2.4.1)
debug level is '5'
DTR=1, RTS=0
Starting UPS detection process...
Asking for UPS information [I]...
I = FAILED [timeout]
Asking for UPS status [Q1]...
Q1 = OK [(226.7 226.7 226.7 045 49.9 13.9 25.0 1001]
Q1 VALUES = [226.7 226.7 226.7 45.0 49.9 13.9 25.0 1001]
Asking for UPS status [Q1]...
Q1 = OK [(227.2 227.2 227.2 045 49.9 13.9 25.0 1001]
Q1 VALUES = [227.2 227.2 227.2 45.0 49.9 13.9 25.0 1001]
Asking for UPS status [Q1]...
Q1 = OK [(227.2 227.2 227.2 045 49.9 13.9 25.0 1001]
Q1 VALUES = [227.2 227.2 227.2 45.0 49.9 13.9 25.0 1001]
Asking for UPS status [Q1]...
Q1 = OK [(227.2 227.2 227.2 045 49.9 13.9 25.0 1001]
Q1 VALUES = [227.2 227.2 227.2 45.0 49.9 13.9 25.0 1001]
Asking for UPS status [Q1]...
Q1 = OK [(227.2 227.2 227.2 045 49.9 13.9 25.0 1001]
Q1 VALUES = [227.2 227.2 227.2 45.0 49.9 13.9 25.0 1001]
0 out of 5 detection attempts failed (minimum failures: 2).
send_to_all: SETINFO ups.type standby
Cancelling any pending shutdown or battery test.
Asking for UPS information [I]...
I = FAILED [timeout]
send_to_all: SETINFO ups.mfr unknown
send_to_all: SETINFO ups.model unknown
Megatec protocol UPS detected.
send_to_all: SETINFO ups.serial unknown
Parameter [ignoreoff]: [false]
Asking for UPS power ratings [F]...
F = OK [#220.0 002 12.00 50.0]
F VALUES = [220.0 2.0 12.0 50.0]
send_to_all: SETINFO battery.voltage.nominal 12.0
send_to_all: SETINFO input.voltage.nominal 220.0
send_to_all: SETINFO input.frequency.nominal 50.0
12.0V battery, interval [9.7V, 13.7V].
send_to_all: SETINFO ups.delay.start 2
send_to_all: SETINFO ups.delay.shutdown 0
send_to_all: ADDCMD test.battery.start.deep
send_to_all: ADDCMD test.battery.start
send_to_all: ADDCMD test.battery.stop
send_to_all: ADDCMD shutdown.return
send_to_all: ADDCMD shutdown.stayoff
send_to_all: ADDCMD shutdown.stop
send_to_all: ADDCMD load.on
send_to_all: ADDCMD load.off
send_to_all: ADDCMD reset.input.minmax
send_to_all: ADDCMD reset.watchdog
send_to_all: ADDCMD beeper.toggle
Done setting up the UPS.
Asking for UPS status [Q1]...
Q1 = OK [(227.2 227.2 227.2 045 49.9 13.9 25.0 1001]
Q1 VALUES = [227.2 227.2 227.2 45.0 49.9 13.9 25.0 1001]
send_to_all: SETINFO input.voltage 227.2
send_to_all: SETINFO input.voltage.fault 227.2
send_to_all: SETINFO output.voltage 227.2
send_to_all: SETINFO ups.load 45.0
send_to_all: SETINFO input.frequency 49.9
send_to_all: SETINFO battery.voltage 13.90
send_to_all: SETINFO ups.temperature 25.0
send_to_all: SETINFO battery.charge 100.0
Calculated battery charge: 100.0%
send_to_all: SETINFO ups.beeper.status enabled
send_to_all: SETINFO input.voltage.minimum 227.2
send_to_all: SETINFO input.voltage.maximum 227.2
send_to_all: SETINFO ups.status OL
send_to_all: DATAOK
dstate_init: sock /var/run/nut/megatec-mustek open on fd 5
send_to_all: SETINFO driver.version 2.4.1
send_to_all: SETINFO driver.version.internal 1.6
send_to_all: SETINFO driver.name megatec
send_to_all: SETINFO driver.parameter.pollinterval 2
Asking for UPS status [Q1]...
Q1 = OK [(227.2 227.6 227.2 045 49.9 13.9 25.0 1001]
Q1 VALUES = [227.2 227.6 227.2 45.0 49.9 13.9 25.0 1001]
send_to_all: SETINFO input.voltage.fault 227.6
Calculated battery charge: 100.0%
Regards!
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
