[Nut-upsuser] Plexus UPS on a QNAP NAS
Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182 http://forum.qnap.com/viewtopic.php?f=182t=35970start=0 t=35970start=0 but I'm not there yet. When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'vendorid' and 'subdriver' options specified. Please refer to the man page for details about these options (man 8 megatec_usb). Please report your results to the NUT user's mailing list nut-upsuser@lists.alioth.debian.org. Driver failed to start (exit status=1) [~] # When I plug the UPS in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 Can't claim USB device [0001:]: could not detach kernel driver from interface 0: Operation not permitted Driver failed to start (exit status=1) My ups.conf looks like this [qnapups] driver = usbhid-ups port = auto mfr = Plexus model = Plexus 500VA UPS desc = Workstation pollinterval=1 ignoreoff lsusb shows before the UPS is plugged in [~] # lsusb Bus 001 Device 003: ID 04a9:10b0 Canon, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 And after [~] # lsusb Bus 001 Device 004: ID 0001: Fry's Electronics Bus 001 Device 003: ID 04a9:10b0 Canon, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 Anyone any ideas...? Thanks, Jon C ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] Plexus UPS on a QNAP NAS
Citeren Jonathan Cunliffe subscript...@gadget.org.uk: [...] Anyone any ideas...? Someone posted a reply to your first message. Instead of reposting the same message, you might try if following that reply might get you further. Reading the manuals might also help. Best regards, Arjen -- Please keep list traffic on the list (off-list replies will be rejected) ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Re: [Nut-upsuser] Plexus UPS on a QNAP NAS
Hi Note that you need to subscribe to this list, in order to post... 2011/1/14 Jonathan Cunliffe subscript...@gadget.org.uk Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182t=35970start=0 but I'm not there yet. (...) and you can get ever more compatibility with nut 2.6.0 ;-) (...) When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'vendorid' and 'subdriver' options specified. Please refer to the man page for details about these options (man 8 megatec_usb). Please report your results to the NUT user's mailing list nut-upsuser@lists.alioth.debian.org. Driver failed to start (exit status=1) [~] # When I plug the UPS in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 Can't claim USB device [0001:]: could not detach kernel driver from interface 0: Operation not permitted Driver failed to start (exit status=1) My ups.conf looks like this [qnapups] driver = usbhid-ups port = auto mfr = Plexus model = Plexus 500VA UPS desc = Workstation pollinterval=1 ignoreoff lsusb shows before the UPS is plugged in [~] # lsusb Bus 001 Device 003: ID 04a9:10b0 Canon, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 And after [~] # lsusb Bus 001 Device 004: ID 0001: Fry's Electronics Bus 001 Device 003: ID 04a9:10b0 Canon, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 Anyone any ideas...? Thanks, you are missing the udev device permissions settings: http://www.networkupstools.org/docs/user-manual.chunked/ar01s05.html#Ownership if the file scripts/udev/52-nut-usbups.rules is not installed in /etc/udev/rules.d/, do so and refresh you udev configuration using udevadm trigger --action=change. cheers, Arnaud -- Linux / Unix Expert RD - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
[Nut-upsuser] Plexus UPS on a QNAP NAS
Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182 http://forum.qnap.com/viewtopic.php?f=182t=35970start=0 t=35970start=0 but I'm not there yet. When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'vendorid' and 'subdriver' options specified. Please refer to the man page for details about these options (man 8 megatec_usb). Please report your results to the NUT user's mailing list nut-upsuser@lists.alioth.debian.org. Driver failed to start (exit status=1) [~] # When I plug the UPS in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 Can't claim USB device [0001:]: could not detach kernel driver from interface 0: Operation not permitted Driver failed to start (exit status=1) My ups.conf looks like this [qnapups] driver = usbhid-ups port = auto mfr = Plexus model = Plexus 500VA UPS desc = Workstation pollinterval=1 ignoreoff lsusb shows before the UPS is plugged in [~] # lsusb Bus 001 Device 003: ID 04a9:10b0 Canon, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 And after [~] # lsusb Bus 001 Device 004: ID 0001: Fry's Electronics Bus 001 Device 003: ID 04a9:10b0 Canon, Inc. Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Bus 001 Device 001: ID 1d6b:0002 Anyone any ideas...? Thanks, Jon C ___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
