Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Arnaud Quette]

2012/11/28 Walter O. Dari 

> El 28/11/12 03:00, Kjell Claesson escribió:
>
>  I think Arnaud was referring to the NUT version.
>> The blazer_usb have been updated so you would need NUT 2.6.4
>> to make it recognise the ups.
>>
>
>
> Ops ... sorry!:-(
>
> Then I'll change the version of nut.
>
> Thank you very much!
>

Kjell is fully right: I was indeed referring to NUT 2.6.4 minimum.
sorry for not stating it more clearly, and thanks to Kjell!

cheers,
Arnaud
-- 
NUT (Network UPS Tools) Project Leader - http://www.networkupstools.org
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.fr
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

El 28/11/12 03:00, Kjell Claesson escribió:

I think Arnaud was referring to the NUT version.
The blazer_usb have been updated so you would need NUT 2.6.4
to make it recognise the ups.



Ops ... sorry!:-(

Then I'll change the version of nut.

Thank you very much!



Regards
Kjell Claesson


Regards,
Walter O. Dari

___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Kjell Claesson]

On Wednesday 28 November 2012 02.18.37 Walter O. Dari wrote:

Hi Walter:

> Hi Arnaud:
> 
> El 24/11/12 12:49, Arnaud Quette escribió:
> > You will need at least 2.6.4 for this unit, but it's really blazer_usb.
> 
> I installed a newer kernel, the 3.2.0, did not work.
> 

I think Arnaud was referring to the NUT version.
The blazer_usb have been updated so you would need NUT 2.6.4
to make it recognise the ups.

Regards
Kjell Claesson


___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

Hi Arnaud:

El 24/11/12 12:49, Arnaud Quette escribió:

You will need at least 2.6.4 for this unit, but it's really blazer_usb.


I installed a newer kernel, the 3.2.0, did not work.

Here are some facts that can help ...

wodari@svrsw2:~$ uname -a 

Linux svrsw2 3.2.0-0.bpo.4-amd64 #1 SMP Debian 3.2.32-1~bpo60+1 x86_64 
GNU/Linux


wodari@svrsw2:~$ lsusb -v

...
... 



Bus 002 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
Device Descriptor:
  bLength18
  bDescriptorType 1
  bcdUSB   1.10
  bDeviceClass0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 8
  idVendor   0x06da Phoenixtec Power Co., Ltd
  idProduct  0x0201
  bcdDevice0.00
  iManufacturer   3
  iProduct1
  iSerial 0
  bNumConfigurations  1
  Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength   34
bNumInterfaces  1
bConfigurationValue 1
iConfiguration  0
bmAttributes 0xa0
  (Bus Powered)
  Remote Wakeup
MaxPower  200mA
Interface Descriptor:
  bLength 9
  bDescriptorType 4
  bInterfaceNumber0
  bAlternateSetting   0
  bNumEndpoints   1
  bInterfaceClass 3 Human Interface Device
  bInterfaceSubClass  0 No Subclass
  bInterfaceProtocol  0 None
  iInterface  0
HID Device Descriptor:
  bLength 9
  bDescriptorType33
  bcdHID   1.11
  bCountryCode0 Not supported
  bNumDescriptors 1
  bDescriptorType34 Report
  wDescriptorLength  27
 Report Descriptors:
   ** UNAVAILABLE **
  Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81  EP 1 IN
bmAttributes3
  Transfer TypeInterrupt
  Synch Type   None
  Usage Type   Data
wMaxPacketSize 0x0008  1x 8 bytes
bInterval  10
cannot read device status, Operation not permitted (1)

...
...

wodari@svrsw2:/etc/nut$ ls -l
total 52
-rwxr--r-- 1 root root  1072 may 30 19:10 hosts.conf
-rwxr--r-- 1 root root  1428 nov 23 04:56 nut.conf
-rwxr--r-- 1 root nut   3850 nov 28 01:47 ups.conf
-rwxr--r-- 1 root nut   1780 may 30 19:10 upsd.conf
-rwxr--r-- 1 root nut   1970 may 30 19:10 upsd.users
-rwxr--r-- 1 root nut  11913 may 30 19:10 upsmon.conf
-rwxr--r-- 1 root nut   3883 may 30 19:10 upssched.conf
-rwxr--r-- 1 root root  1420 may 30 19:10 upsset.conf
-rwxr--r-- 1 root root  4003 may 30 19:10 upsstats.html
-rwxr--r-- 1 root root  6644 may 30 19:10 upsstats-single.html


ups.conf
--
[maxim]
driver = blazer_usb
bus = "002"
port = auto
vendorid = 06da
productid = 0201
serial = "0"
vendor = "Phoenixtec Power Co., Ltd"
desc = "SW servers"
--


wodari@svrsw2:~$ /sbin/upsdrvctl start 


Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
No supported devices found. Please check your device availability with 
'lsusb'

and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these 
options

(man 8 blazer).

Driver failed to start (exit status=1)


As root...

root@svrsw2:~# /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
No supported devices found. Please check your device availability with 
'lsusb'

and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these 
options

(man 8 blazer).

Driver failed to start (exit status=1)



I tried running ...

root@svrsw2:~# udevadm control --reload-rules

and

root@svrsw2:~# udevadm trigger

... did not work.


What else I can try?


Regards,
Walter





Cheers,
Arnaud
(sent from my S3... please excuse my brevity)

Le 23 nov. 2012 09:40, "Walter O. Dari" mailto:wlin...@gmail.com>> a écrit :

Results:

wodari@svrsw2:/usr/local/__MonitorSoftware$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Devi

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

El 24/11/12 12:49, Arnaud Quette escribió:

You will need at least 2.6.4 for this unit, but it's really blazer_usb.


Ok, I'll try ...


Thanks,
Walter





Cheers,
Arnaud
(sent from my S3... please excuse my brevity)

Le 23 nov. 2012 09:40, "Walter O. Dari" mailto:wlin...@gmail.com>> a écrit :

Results:

wodari@svrsw2:/usr/local/__MonitorSoftware$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


1
--__--__
ups.conf

[maxim]
    driver = blazer_usb
    port = auto
    desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
No supported devices found. Please check your device availability
with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does
not help,
try running the driver with at least 'subdriver', 'vendorid' and
'productid'
options specified. Please refer to the man page for details about
these options
(man 8 blazer).

Driver failed to start (exit status=1)
--__--__

2
--__--__
ups.conf

[maxim]
    driver = megatec_usb
    port = auto
    desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)
Serial-over-USB transport layer 0.10
No supported devices found. Please check your device availability
with 'lsusb'
and make sure you have an up-to-date version of NUT. If this does
not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
mailto:nut-upsuser@lists.alioth.debian.org>>.

Driver failed to start (exit status=1)
--__--__

3
--__--__
ups.conf

[maxim]
    driver = bcmxcp_usb
    port = auto
    desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
USB communication subdriver 0.18
Can't open POWERWARE USB device, retrying ...
Can't open POWERWARE USB device, retrying ...
Can't open POWERWARE USB device, retrying ...
--__--__

4
--__--__
ups.conf

[maxim]
    driver = tripplite_usb
    port = auto
    desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)
Warning: This is an experimental driver.
Some features may not function correctly.

No matching USB/HID UPS found
Driver failed to start (exit status=1)
--__--__


More info...

I'm use Debian Squeeze

wodari@svrsw2:~$ uname -a
Linux svrsw2 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012
x86_64 GNU/Linux

wodari@svrsw2:~$ upsrw maxim
Can't connect: Connection failure: Connection refused

wodari@svrsw2:~$ upscmd -l maxim
Error: Connection failure: Connection refused



Walter




El 23/11/12 04:18, Arnaud Quette escribió:

HolÃ

Try blazer_usb. Please report back if everything is working as per
http://www.networkupstools.__org/stable-hcl.html#footnotes


Cheers
Arnaud
(sent from my S3... please excuse my brevity)

Le 21 nov. 2012 23:13, "Walter O. Dari" mailto:wlin...@gmail.com>
>> a
écrit :

    Hello:

    I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
    Connects to the PC by a USB 2.0 port.
    I wanted to use nut, but this brand is not on the list of
nut drivers.

    lsusb returns:

 

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Arnaud Quette]

You will need at least 2.6.4 for this unit, but it's really blazer_usb.

Cheers,
Arnaud
(sent from my S3... please excuse my brevity)
Le 23 nov. 2012 09:40, "Walter O. Dari"  a écrit :

> Results:
>
> wodari@svrsw2:/usr/local/**MonitorSoftware$ lsusb
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
>
> 1
> --**--**
> 
> ups.conf
>
> [maxim]
> driver = blazer_usb
> port = auto
> desc = "SW servers"
>
>
> wodari@svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
> No supported devices found. Please check your device availability with
> 'lsusb'
> and make sure you have an up-to-date version of NUT. If this does not help,
> try running the driver with at least 'subdriver', 'vendorid' and
> 'productid'
> options specified. Please refer to the man page for details about these
> options
> (man 8 blazer).
>
> Driver failed to start (exit status=1)
> --**--**
> 
>
> 2
> --**--**
> 
> ups.conf
>
> [maxim]
> driver = megatec_usb
> port = auto
> desc = "SW servers"
>
>
> wodari@svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)
> Serial-over-USB transport layer 0.10
> No supported devices found. Please check your device availability with
> 'lsusb'
> and make sure you have an up-to-date version of NUT. If this does not help,
> try running the driver with at least 'vendorid' and 'subdriver' options
> specified. Please refer to the man page for details about these options
> (man 8 megatec_usb).
> Please report your results to the NUT user's mailing list
> 
> >.
>
> Driver failed to start (exit status=1)
> --**--**
> 
>
> 3
> --**--**
> 
> ups.conf
>
> [maxim]
> driver = bcmxcp_usb
> port = auto
> desc = "SW servers"
>
>
> wodari@svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
> USB communication subdriver 0.18
> Can't open POWERWARE USB device, retrying ...
> Can't open POWERWARE USB device, retrying ...
> Can't open POWERWARE USB device, retrying ...
> --**--**
> 
>
> 4
> --**--**
> 
> ups.conf
>
> [maxim]
> driver = tripplite_usb
> port = auto
> desc = "SW servers"
>
>
> wodari@svrsw2:~$ /sbin/upsdrvctl start
> Network UPS Tools - UPS driver controller 2.4.3
> Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)
> Warning: This is an experimental driver.
> Some features may not function correctly.
>
> No matching USB/HID UPS found
> Driver failed to start (exit status=1)
> --**--**
> 
>
>
> More info...
>
> I'm use Debian Squeeze
>
> wodari@svrsw2:~$ uname -a
> Linux svrsw2 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64
> GNU/Linux
>
> wodari@svrsw2:~$ upsrw maxim
> Can't connect: Connection failure: Connection refused
>
> wodari@svrsw2:~$ upscmd -l maxim
> Error: Connection failure: Connection refused
>
>
>
> Walter
>
>
>
>
> El 23/11/12 04:18, Arnaud Quette escribió:
>
>> HolÃ
>>
>> Try blazer_usb. Please report back if everything is working as per
>> http://www.networkupstools.**org/stable-hcl.html#footnotes
>>
>> Cheers
>> Arnaud
>> (sent from my S3... please excuse my brevity)
>>
>> Le 21 nov. 2012 23:13, "Walter O. Dari" > > a écrit :
>>
>> Hello:
>>
>> I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
>> Connects to the PC by a USB 2.0 port.
>> I wanted to use nut, but this brand is not on the list of nut drivers.
>>
>> lsusb returns:
>>
>> ...
>> Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
>> ...
>>
>> I did not find this manufacturer in the driver list.
>>
>> Anyone know if you can have compatibility with other make and model
>> of UPS.
>>
>> With what driver it could start testing?
>>
>> Greetings and thanks,
>> Walter
>>
>> (original Spanish text translated by Google)
>>
>
___
Nut-upsuser 

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

Results:

wodari@svrsw2:/usr/local/MonitorSoftware$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 06da:0201 Phoenixtec Power Co., Ltd
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


1

ups.conf

[maxim]
driver = blazer_usb
port = auto
desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.3)
No supported devices found. Please check your device availability with 
'lsusb'

and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'subdriver', 'vendorid' and 'productid'
options specified. Please refer to the man page for details about these 
options

(man 8 blazer).

Driver failed to start (exit status=1)


2

ups.conf

[maxim]
driver = megatec_usb
port = auto
desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Megatec protocol driver 1.6 (2.4.3)
Serial-over-USB transport layer 0.10
No supported devices found. Please check your device availability with 
'lsusb'

and make sure you have an up-to-date version of NUT. If this does not help,
try running the driver with at least 'vendorid' and 'subdriver' options
specified. Please refer to the man page for details about these options
(man 8 megatec_usb).
Please report your results to the NUT user's mailing list
.

Driver failed to start (exit status=1)


3

ups.conf

[maxim]
driver = bcmxcp_usb
port = auto
desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
USB communication subdriver 0.18
Can't open POWERWARE USB device, retrying ...
Can't open POWERWARE USB device, retrying ...
Can't open POWERWARE USB device, retrying ...


4

ups.conf

[maxim]
driver = tripplite_usb
port = auto
desc = "SW servers"


wodari@svrsw2:~$ /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.4.3)
Warning: This is an experimental driver.
Some features may not function correctly.

No matching USB/HID UPS found
Driver failed to start (exit status=1)



More info...

I'm use Debian Squeeze

wodari@svrsw2:~$ uname -a
Linux svrsw2 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 
GNU/Linux


wodari@svrsw2:~$ upsrw maxim
Can't connect: Connection failure: Connection refused

wodari@svrsw2:~$ upscmd -l maxim
Error: Connection failure: Connection refused



Walter




El 23/11/12 04:18, Arnaud Quette escribió:

HolÃ

Try blazer_usb. Please report back if everything is working as per
http://www.networkupstools.org/stable-hcl.html#footnotes

Cheers
Arnaud
(sent from my S3... please excuse my brevity)

Le 21 nov. 2012 23:13, "Walter O. Dari" mailto:wlin...@gmail.com>> a écrit :

Hello:

I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
Connects to the PC by a USB 2.0 port.
I wanted to use nut, but this brand is not on the list of nut drivers.

lsusb returns:

...
Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
...

I did not find this manufacturer in the driver list.

Anyone know if you can have compatibility with other make and model
of UPS.

With what driver it could start testing?

Greetings and thanks,
Walter

(original Spanish text translated by Google)


___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

Hi:

El 23/11/12 04:18, Arnaud Quette escribió:

HolÃ

Try blazer_usb. Please report back if everything is working as per
http://www.networkupstools.org/stable-hcl.html#footnotes


Ok, I'll try and comment the results.



Cheers
Arnaud
(sent from my S3... please excuse my brevity)


No problem...

Regards,
Walter




Le 21 nov. 2012 23:13, "Walter O. Dari" mailto:wlin...@gmail.com>> a écrit :

Hello:

I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
Connects to the PC by a USB 2.0 port.
I wanted to use nut, but this brand is not on the list of nut drivers.

lsusb returns:

...
Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
...

I did not find this manufacturer in the driver list.

Anyone know if you can have compatibility with other make and model
of UPS.

With what driver it could start testing?

Greetings and thanks,
Walter

(original Spanish text translated by Google)

_
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.__debian.org

http://lists.alioth.debian.__org/cgi-bin/mailman/listinfo/__nut-upsuser





___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Re: [Nut-upsuser] driver looking for MAXIM MXE II

[Arnaud Quette]

Holà

Try blazer_usb. Please report back if everything is working as per
http://www.networkupstools.org/stable-hcl.html#footnotes

Cheers
Arnaud
(sent from my S3... please excuse my brevity)
Le 21 nov. 2012 23:13, "Walter O. Dari"  a écrit :

> Hello:
>
> I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
> Connects to the PC by a USB 2.0 port.
> I wanted to use nut, but this brand is not on the list of nut drivers.
>
> lsusb returns:
>
> ...
> Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
> ...
>
> I did not find this manufacturer in the driver list.
>
> Anyone know if you can have compatibility with other make and model of UPS.
>
> With what driver it could start testing?
>
> Greetings and thanks,
> Walter
>
> (original Spanish text translated by Google)
>
> __**_
> Nut-upsuser mailing list
> Nut-upsuser@lists.alioth.**debian.org
> http://lists.alioth.debian.**org/cgi-bin/mailman/listinfo/**nut-upsuser
>
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

[Nut-upsuser] driver looking for MAXIM MXE II

[Walter O. Dari]

Hello:

I have a UPS model MXE II MAXIM brand online, 3500VA 2100W.
Connects to the PC by a USB 2.0 port.
I wanted to use nut, but this brand is not on the list of nut drivers.

lsusb returns:

...
Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd
...

I did not find this manufacturer in the driver list.

Anyone know if you can have compatibility with other make and model of UPS.

With what driver it could start testing?

Greetings and thanks,
Walter

(original Spanish text translated by Google)

___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser