Re: Quectel EC200T USB: Problems with context activation
Hi Denis, Thank you very much for your quick and helpful reply. The problem is a bit vulgar actually. That's a shame that I took your time for that but I have another question as I am not sure about the findings below. I had tried to get dump with gsmdial and gsmdial successfully activated the context. So the problem is that we have authentication method set to NONE in ofono. But gsmdial uses CHAP by default. I have manually set the auth to CHAP for the context in ofono and ofono successfully activated the context. There is the provider info from mobile-broadband-provider-info about my provider: China Unicom uninet 联通彩信 http://mmsc.myuni.com.cn 10.0.0.172:80 Am I correct that ofono must use CHAP if the auth method is not specified in the db? I see that the technology used by the modem is HSPA. And I see the following in ofono/drivers/atmodem/lte.c: /* change the authentication method if the parameters are invalid */ if (!*ldd->pending_info.username || !*ldd->pending_info.password) auth_method = OFONO_GPRS_AUTH_METHOD_NONE; And in ofono/plugins/mbpi.c: /* select authentication method NONE if fit */ if (!ap->username || !ap->password) ap->auth_method = OFONO_GPRS_AUTH_METHOD_NONE; As well as ofono/plugins/fileprovision.c:: /* select default authentication method */ (*settings)[0].auth_method = OFONO_GPRS_AUTH_METHOD_NONE; ofono/src/lte.c: /* this must have a valid default */ if (!gprs_auth_method_from_string(auth_method_str, >info.auth_method)) lte->info.auth_method = OFONO_GPRS_AUTH_METHOD_NONE; I am not sure about the standards which may be relevant here. Sorry for asking this but I thought that we should use CHAP by default, don't we? Thank you again and have a nice day. Yours sincerely, Sergei Golubtsov. ___ ofono mailing list -- ofono@ofono.org To unsubscribe send an email to ofono-le...@ofono.org
Re: Quectel EC200T USB: Problems with context activation
Hi Sergei, On 5/18/21 4:19 PM, Sergei Golubtsov wrote: Hi Denis and all, I have some problems with the context activation on Quectel EC200T USB in chinese network although in russian networks the modem works fine. I have the following during the activation: 2021-05-18T23:35:50.624972+03:00 ofonod[999]: [info] Modem: < \r\nCONNECT\r\n 2021-05-18T23:35:50.625854+03:00 ofonod[999]: [debug] ../git/ofono/drivers/atmodem/gprs-context.c:at_cgdata_cb() ok 1 2021-05-18T23:35:50.626564+03:00 ofonod[999]: [debug] ../git/ofono/drivers/atmodem/gprs-context.c:setup_ppp() 2021-05-18T23:35:50.627463+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 0:INITIAL 2021-05-18T23:35:50.628216+03:00 ofonod[999]: [info] PPP: event: 0 (Up), action: 2, new_state: 2 (CLOSED) 2021-05-18T23:35:50.628884+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 2:CLOSED 2021-05-18T23:35:50.629521+03:00 ofonod[999]: [info] PPP: event: 2 (Open), action: 1026, new_state: 6 (REQSENT) 2021-05-18T23:35:50.630234+03:00 ofonod[999]: [info] PPP: lcp: pppcp_initialize_restart_count: current state 2:CLOSED 2021-05-18T23:35:50.630876+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_request: current state 2:CLOSED 2021-05-18T23:35:50.631641+03:00 ofonod[999]: [info] PPP: ../git/ofono/gatchat/gatppp.c:ppp_enter_phase() 1 2021-05-18T23:35:50.634253+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 6:REQSENT 2021-05-18T23:35:50.635270+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 6:REQSENT 2021-05-18T23:35:50.635423+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4006, new_state: 6 (REQSENT) Peer is sending us options we do not find acceptable... Do you have a wireshark trace to see what this might be? 2021-05-18T23:35:50.635544+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_nak: current state 6:REQSENT 2021-05-18T23:35:50.636566+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_ack: current state 6:REQSENT Looks like our options (that we're sending) are accepted by the peer 2021-05-18T23:35:50.636696+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 6:REQSENT 2021-05-18T23:35:50.637067+03:00 ofonod[999]: [info] PPP: event: 8 (RCA), action: 27, new_state: 7 (ACKRCVD) 2021-05-18T23:35:50.637187+03:00 ofonod[999]: [info] PPP: lcp: pppcp_initialize_restart_count: current state 6:REQSENT 2021-05-18T23:35:50.637187+03:00 ofonod[999]: [info] PPP: lcp: pppcp_initialize_restart_count: current state 6:REQSENT 2021-05-18T23:35:50.637597+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD 2021-05-18T23:35:50.637715+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD 2021-05-18T23:35:50.637826+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4007, new_state: 7 (ACKRCVD) 2021-05-18T23:35:50.637929+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_nak: current state 7:ACKRCVD 2021-05-18T23:35:50.639907+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD 2021-05-18T23:35:50.640246+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD 2021-05-18T23:35:50.640992+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4007, new_state: 7 (ACKRCVD) and basically we get into an infinite loop with the peer trying to set some options we find unacceptable.. So, the following lines repeats infinitely, context is not activated and ofono uses ~90% of the CPU until I stop it: 2021-05-18T23:35:50.637929+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_nak: current state 7:ACKRCVD 2021-05-18T23:35:50.639907+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD 2021-05-18T23:35:50.640246+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD 2021-05-18T23:35:50.640992+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4007, new_state: 7 (ACKRCVD) Could someone shed a light on what is going on there and how to solve that? Thanks in advance. Have a nice day. Yours sincerely, Sergei Golubtsov. Regards, -Denis ___ ofono mailing list -- ofono@ofono.org To unsubscribe send an email to ofono-le...@ofono.org
Quectel EC200T USB: Problems with context activation in chineese networks
Hi Denis and all, I have some problems with the context activation on Quectel EC200T USB in chinese network although in russian networks the modem works fine. I have the following during the activation: 2021-05-18T23:35:50.624972+03:00 ofonod[999]: [info] Modem: < \r\nCONNECT\r\n 2021-05-18T23:35:50.625854+03:00 ofonod[999]: [debug] ../git/ofono/drivers/atmodem/gprs-context.c:at_cgdata_cb() ok 1 2021-05-18T23:35:50.626564+03:00 ofonod[999]: [debug] ../git/ofono/drivers/atmodem/gprs-context.c:setup_ppp() 2021-05-18T23:35:50.627463+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 0:INITIAL 2021-05-18T23:35:50.628216+03:00 ofonod[999]: [info] PPP: event: 0 (Up), action: 2, new_state: 2 (CLOSED) 2021-05-18T23:35:50.628884+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 2:CLOSED 2021-05-18T23:35:50.629521+03:00 ofonod[999]: [info] PPP: event: 2 (Open), action: 1026, new_state: 6 (REQSENT) 2021-05-18T23:35:50.630234+03:00 ofonod[999]: [info] PPP: lcp: pppcp_initialize_restart_count: current state 2:CLOSED 2021-05-18T23:35:50.630876+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_request: current state 2:CLOSED 2021-05-18T23:35:50.631641+03:00 ofonod[999]: [info] PPP: ../git/ofono/gatchat/gatppp.c:ppp_enter_phase() 1 2021-05-18T23:35:50.634253+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 6:REQSENT 2021-05-18T23:35:50.635270+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 6:REQSENT 2021-05-18T23:35:50.635423+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4006, new_state: 6 (REQSENT) 2021-05-18T23:35:50.635544+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_nak: current state 6:REQSENT 2021-05-18T23:35:50.636566+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_ack: current state 6:REQSENT 2021-05-18T23:35:50.636696+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 6:REQSENT 2021-05-18T23:35:50.637067+03:00 ofonod[999]: [info] PPP: event: 8 (RCA), action: 27, new_state: 7 (ACKRCVD) 2021-05-18T23:35:50.637187+03:00 ofonod[999]: [info] PPP: lcp: pppcp_initialize_restart_count: current state 6:REQSENT 2021-05-18T23:35:50.637187+03:00 ofonod[999]: [info] PPP: lcp: pppcp_initialize_restart_count: current state 6:REQSENT 2021-05-18T23:35:50.637597+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD 2021-05-18T23:35:50.637715+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD 2021-05-18T23:35:50.637826+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4007, new_state: 7 (ACKRCVD) 2021-05-18T23:35:50.637929+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_nak: current state 7:ACKRCVD 2021-05-18T23:35:50.639907+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD 2021-05-18T23:35:50.640246+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD 2021-05-18T23:35:50.640992+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4007, new_state: 7 (ACKRCVD) So, the following lines repeats infinitely, context is not activated and ofono uses ~90% of the CPU until I stop it: 2021-05-18T23:35:50.637929+03:00 ofonod[999]: [info] PPP: lcp: pppcp_send_configure_nak: current state 7:ACKRCVD 2021-05-18T23:35:50.639907+03:00 ofonod[999]: [info] PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD 2021-05-18T23:35:50.640246+03:00 ofonod[999]: [info] PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD 2021-05-18T23:35:50.640992+03:00 ofonod[999]: [info] PPP: event: 7 (RCR-), action: 4007, new_state: 7 (ACKRCVD) Could someone shed a light on what is going on there and how to solve that? Thanks in advance. Have a nice day. Yours sincerely, Sergei Golubtsov. ___ ofono mailing list -- ofono@ofono.org To unsubscribe send an email to ofono-le...@ofono.org
