[onap-discuss] #modeling [modeling] Modeling Subcommittee Ballots have been distributed #lfn

[Kenny Paul]

Ballots have been distributed to qualified members on V118 of the membership 
list, as per the criteria set in Section 4.4.1.3 of the Community Document.  
A total of 34 people are authorized to vote.

Sending mail to voter andreik

Sending mail to voter tina.tsou

Sending mail to voter am803u

Sending mail to voter m.a.choquette

Sending mail to voter zhongheliu

Sending mail to voter dpc

Sending mail to voter yangyanyj

Sending mail to voter shiyb.gd

Sending mail to voter hanzd6

Sending mail to voter ndavis

Sending mail to voter donaldh

Sending mail to voter 18350830036

Sending mail to voter michela.bevilacqua

Sending mail to voter michael

Sending mail to voter lanxiaocheng.07445

Sending mail to voter denghui12

Sending mail to voter alex.vul

Sending mail to voter priya.g

Sending mail to voter thinh.nguyenphu

Sending mail to voter jessie.jewitt

Sending mail to voter eric.debeau

Sending mail to voter hanyanan

Sending mail to voter pvaanane

Sending mail to voter ilkook.yun

Sending mail to voter doug.grinkemeyer

Sending mail to voter dp00476350

Sending mail to voter ceciliamaria.corbi

Sending mail to voter 14_ykl

Sending mail to voter lauwers

Sending mail to voter mehmet.toy

Sending mail to voter lxinhui

Sending mail to voter emmanuel.sarris

Sending mail to voter xiaohua.zhang

Sending mail to voter zhang.maopeng1

 

Email Subject: Poll: ONAP 2018 Modeling Subcommittee Elections

Sender: Kenny Paul (CIVS poll supervisor) c...@cs.cornell.edu

Voting ends 4:00 PM Pacific, Wed. Sep. 12, 2018

 

Make sure your spam filter does not block c...@cs.cornell.edu 

If you know that you are authorized to vote and did not receive a ballot check 
your junk/spam folders

Happy voting.

 

 

Best Regards, 
-kenny

Kenny Paul, Technical Program Manager, The Linux Foundation
kp...@linuxfoundation.org, 510.766.5945
San Francisco Bay Area, Pacific Time Zone

 

 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12292): https://lists.onap.org/g/onap-discuss/message/12292
Mute This Topic: https://lists.onap.org/mt/25266803/21656
Mute #modeling: https://lists.onap.org/mk?hashtag=modeling&subid=2740164
Mute #lfn: https://lists.onap.org/mk?hashtag=lfn&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [oom] 110 kubernetes pod limit increase for single node dev deployment testing - procedure

[Eric Debeau]

Hi Mike

Yes, I am aware about this work ;-)

But, it would not reduce the memory to be used as long as most of Docker are 
launched with JVM using ‘big’ heap size.
I am working to reduce the heap size for various components. I hope that I can 
share valuable results in the next weeks.

I agree that we would get good results by optimizing data bases (using various 
Cassandra databases is not optimized).

Best Regards

Eric

De : Mike Elliott [mailto:mike.elli...@amdocs.com]
Envoyé : jeudi 6 septembre 2018 19:25
À : onap-discuss@lists.onap.org; DEBEAU Eric IMT/OLN
Objet : Re: [onap-discuss] [oom] 110 kubernetes pod limit increase for single 
node dev deployment testing - procedure

Hi Eric,

Are you familiar with the resource limits that are being added to the helm 
charts (for all projects) under OOM-1145 
?
One of the benefits of this work is to set the minimum and maximum limits for 
memory used by each onap component (pod).
Are you working on something similar or do you have any insight that you can 
share with the teams that might help us get the best results out of this effort?

As a side note, one of the largest reductions in memory usage will most likely 
come as part of Dublin, in the form of a shared database cluster. This would be 
instead of each project spinning up their own cluster instances in order to 
meet S3P requirements.

Thanks,
Mike.

From:  on behalf of Eric Debeau 

Reply-To: "onap-discuss@lists.onap.org" , 
"eric.deb...@orange.com" 
Date: Wednesday, September 5, 2018 at 4:13 PM
To: "onap-discuss@lists.onap.org" 
Subject: Re: [onap-discuss] [oom] 110 kubernetes pod limit increase for single 
node dev deployment testing - procedure

Hello

We need to work on a smaller footprint for testing purposes.

I agree that using a single VM can facilitate the work, but we also need to 
reduce the memory footprint.
Most of pods are consuming a lot of memory not necessary for simple tests.

I am currently working on a solution to reduce the global footprint with a 
target to lower the memory footprint for the vFW use-case as low as possible.

Best Regards

Eric

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at https://www.amdocs.com/about/email-disclaimer

_

Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.

This message and its attachments may contain confidential or privileged 
information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete 
this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.
Thank you.


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12291): https://lists.onap.org/g/onap-discuss/message/12291
Mute This Topic: https://lists.onap.org/mt/25213556/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] [doc] DOC Project PTL Election - Self-Nomination Phase Open

[Rich Bennett]

Documentation Project Committers,

The ONAP PTL Elections process is described in the ONAP wiki at the following 
link : https://wiki.onap.org/display/DW/Annual+Community+Elections

The self-nomination phase is now open and will end in 2 business days from the 
time this email appears on the discuss list.
If you are interested in running for the PTL position, please reply all to this 
message to self-nominate.

The list of committers for the DOC project may be found here
https://gerrit.onap.org/r/gitweb?p=doc.git;a=blob_plain;f=INFO.yaml;hb=HEAD

Regards,
Rich Bennett

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12290): https://lists.onap.org/g/onap-discuss/message/12290
Mute This Topic: https://lists.onap.org/mt/25264919/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] #SO Is there a good way to send multiple requests as a batch to SO BPMN

[Urwashi]

We are creating a single service instance, but we would like to have an array 
of sets of parameters in the request parameters. For example:

{"requestParameters": {
  "subscriptionServiceType": "EVPN",
  "userParams": [
{
  "vlan-id": "123",
  "network-id": "FAKE",
},
{
  "vlan-id": "572",
  "network-id": "FAKE",
},
 ...
  ]
}
From: "SMOKOWSKI, STEVEN" 
Date: Thursday, September 6, 2018 at 1:25 PM
To: "onap-discuss@lists.onap.org" , Urwashi 
Saraswat 
Subject: Re: [onap-discuss] #SO Is there a good way to send multiple requests 
as a batch to SO BPMN

What are you wanting to batch?  Entire service creations?

Thanks

-Steve


From:  on behalf of Urwashi 

Reply-To: "onap-discuss@lists.onap.org" , 
"saraswat.urwa...@amdocs.com" 
Date: Thursday, September 6, 2018 at 1:24 PM
To: "'onap-discuss@lists.onap.org'" 
Subject: [onap-discuss] #SO Is there a good way to send multiple requests as a 
batch to SO BPMN

Hi

I have requirement to send multiple requests to SO as a single batch event. Is 
there a way  to do this currently in a clean way? Any suggestions?


Thanks
Urwashi
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at 
https://www.amdocs.com/about/email-disclaimer

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12289): https://lists.onap.org/g/onap-discuss/message/12289
Mute This Topic: https://lists.onap.org/mt/25239603/21656
Mute #so: https://lists.onap.org/mk?hashtag=so&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] APPC is not healthy install error #oom #appc #install #opendaylight-releng

[jkzcristiano]

Aaron, thank you for that command it helps a lot to follow what is going on.

Taka, I modified the values.yaml of appc as:

# probe configuration parameters
liveness:
  initialDelaySeconds: 100 # initially it was set to 10
  periodSeconds: 10
  # necessary to disable liveness probe when setting breakpoints
  # in debugger so K8s doesn't restart unresponsive container
  enabled: true
 
readiness:
  initialDelaySeconds: 100 # initially it was set to 10
  periodSeconds: 10

Now it worked!!! Thank you very much :)

Anayway, in case anyone experiences the same issue, just note that "during the 
process the error still appears but after more than 10 min. it dissapears!"

Kind Regards

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12288): https://lists.onap.org/g/onap-discuss/message/12288
Mute This Topic: https://lists.onap.org/mt/25236625/21656
Mute #opendaylight-releng: 
https://lists.onap.org/mk?hashtag=opendaylight-releng&subid=2740164
Mute #appc: https://lists.onap.org/mk?hashtag=appc&subid=2740164
Mute #oom: https://lists.onap.org/mk?hashtag=oom&subid=2740164
Mute #install: https://lists.onap.org/mk?hashtag=install&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] APPC is not healthy install error #oom #appc #install #opendaylight-releng

[Aaron Hay]

No timeout should need to be changed. The readiness state should be ready after 
the install completes. You can run the command below to see the installation 
status:


kubectl logs dev-appc-0 -c appc  -n onap  -f

From: onap-discuss@lists.onap.org  On Behalf Of 
jkzcristiano
Sent: Thursday, September 06, 2018 2:05 PM
To: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] APPC is not healthy install error #oom #appc 
#install #opendaylight-releng

Dear Taka Cho,

thank you very much for your answer! How can I change the time out?

Kind Regards


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12287): https://lists.onap.org/g/onap-discuss/message/12287
Mute This Topic: https://lists.onap.org/mt/25236625/21656
Mute #opendaylight-releng: 
https://lists.onap.org/mk?hashtag=opendaylight-releng&subid=2740164
Mute #appc: https://lists.onap.org/mk?hashtag=appc&subid=2740164
Mute #oom: https://lists.onap.org/mk?hashtag=oom&subid=2740164
Mute #install: https://lists.onap.org/mk?hashtag=install&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] APPC is not healthy install error #oom #appc #install #opendaylight-releng

[jkzcristiano]

Dear Taka Cho,

thank you very much for your answer! How can I change the time out?

Kind Regards

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12285): https://lists.onap.org/g/onap-discuss/message/12285
Mute This Topic: https://lists.onap.org/mt/25236625/21656
Mute #opendaylight-releng: 
https://lists.onap.org/mk?hashtag=opendaylight-releng&subid=2740164
Mute #appc: https://lists.onap.org/mk?hashtag=appc&subid=2740164
Mute #oom: https://lists.onap.org/mk?hashtag=oom&subid=2740164
Mute #install: https://lists.onap.org/mk?hashtag=install&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] FW: #vnfrqts meeting time poll

[WRIGHT, STEVEN A]

Resending  as I saw a lot fewer responses than we have folks claiming to be 
contributors. Based on the current responses it is difficult to justify any 
changes in the meeting time. I'll leave the poll open and review on the next 
vnfrqts call on Tuesday.

best regards
Steven Wright, MBA, PhD, JD.
[Tech Integration]
AT&T Services Inc.
1057 Lenox Park Blvd NE, STE 4D28
Atlanta, GA 30319

From: WRIGHT, STEVEN A
Sent: Wednesday, August 29, 2018 10:42 AM
To: 'onap-discuss@lists.onap.org' 
Subject: #vnfrqts meeting time poll

Lets try this again - last time I messed up the settings and people could only 
respond with a single option. Please respond by the next vnfrqts meeting next 
Tuesday and we can discuss the poll results.
The revised poll link is: 
https://doodle.com/poll/quwy458mwuwtie2k

best regards
Steven Wright, MBA, PhD, JD.
[Tech Integration]
AT&T Services Inc.
1057 Lenox Park Blvd NE, STE 4D28
Atlanta, GA 30319


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12284): https://lists.onap.org/g/onap-discuss/message/12284
Mute This Topic: https://lists.onap.org/mt/25239965/21656
Mute #vnfrqts: https://lists.onap.org/mk?hashtag=vnfrqts&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] APPC is not healthy install error #oom #appc #install #opendaylight-releng

[Taka Cho]

Hi,

The startODL.sh initialized and took 20-30 mins now. It’s going to be enhanced 
for that script, but please change the time out, and let me know how it goes.

Taka

From: onap-discuss@lists.onap.org [mailto:onap-discuss@lists.onap.org] On 
Behalf Of jkzcristiano
Sent: Thursday, September 06, 2018 7:22 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] APPC is not healthy install error #oom #appc #install 
#opendaylight-releng

Dear all,

I am experiencing an issue during APPC service installation. I installed ONAP 
Beijing before (like 3-4 times) and never had that problem. So, it is strange. 
I tried to change images in values.yaml to older ones but the same issue (e.g., 
from 1.4.0-SNAPSHOT-latest to 1.4.0-SNAPSHOT-20180901T133033Z).

Below my APPC pods:
ubuntu@rancher:~/oom/kubernetes$ kubectl get pods --all-namespaces -o=wide | 
grep appc
onap  onap-appc-appc-0  
   1/2   Running   1  14m   10.42.71.236compute2
onap  onap-appc-appc-cdt-5778bf9685-9np7j1/1   
Running   0  14m   10.42.146.43compute1
onap  onap-appc-appc-db-0   
 2/2   Running   0  14m   10.42.229.224   compute2
onap  onap-appc-appc-dgbuilder-75b9dc65c8-jdnqv  1/1   
Running   0  14m   10.42.189.225   compute1

The "onap-appc-appc-0" pod is restarted repeatedly as time goes by.

This is the output from K8s dashboard (this error also appears 
here
 without any solution):

Readiness probe failed: APPC is not healthy. ++ ps -e ++ grep startODL ++ wc -l 
+ startODL_status=1 ++ /opt/opendaylight/current/bin/client bundle:list ++ grep 
Waiting ++ wc -l Failed to get the session. + waiting_bundles=0 ++ 
/opt/opendaylight/current/bin/client system:start-level Failed to get the 
session. + run_level= + '[' '' == 'Level 100' ']' + echo APPC is not healthy. + 
exit 1

Can you help me, please?

Kind Regards,

Xoan


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12283): https://lists.onap.org/g/onap-discuss/message/12283
Mute This Topic: https://lists.onap.org/mt/25236625/21656
Mute #opendaylight-releng: 
https://lists.onap.org/mk?hashtag=opendaylight-releng&subid=2740164
Mute #appc: https://lists.onap.org/mk?hashtag=appc&subid=2740164
Mute #oom: https://lists.onap.org/mk?hashtag=oom&subid=2740164
Mute #install: https://lists.onap.org/mk?hashtag=install&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] #SO Is there a good way to send multiple requests as a batch to SO BPMN

[Steve Smokowski]

What are you wanting to batch?  Entire service creations?

Thanks

-Steve


From:  on behalf of Urwashi 

Reply-To: "onap-discuss@lists.onap.org" , 
"saraswat.urwa...@amdocs.com" 
Date: Thursday, September 6, 2018 at 1:24 PM
To: "'onap-discuss@lists.onap.org'" 
Subject: [onap-discuss] #SO Is there a good way to send multiple requests as a 
batch to SO BPMN

Hi

I have requirement to send multiple requests to SO as a single batch event. Is 
there a way  to do this currently in a clean way? Any suggestions?


Thanks
Urwashi
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at 
https://www.amdocs.com/about/email-disclaimer


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12282): https://lists.onap.org/g/onap-discuss/message/12282
Mute This Topic: https://lists.onap.org/mt/25239603/21656
Mute #so: https://lists.onap.org/mk?hashtag=so&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [oom] 110 kubernetes pod limit increase for single node dev deployment testing - procedure

[Mike Elliott]

Hi Eric,

Are you familiar with the resource limits that are being added to the helm 
charts (for all projects) under OOM-1145 
?
One of the benefits of this work is to set the minimum and maximum limits for 
memory used by each onap component (pod).
Are you working on something similar or do you have any insight that you can 
share with the teams that might help us get the best results out of this effort?

As a side note, one of the largest reductions in memory usage will most likely 
come as part of Dublin, in the form of a shared database cluster. This would be 
instead of each project spinning up their own cluster instances in order to 
meet S3P requirements.

Thanks,
Mike.

From:  on behalf of Eric Debeau 

Reply-To: "onap-discuss@lists.onap.org" , 
"eric.deb...@orange.com" 
Date: Wednesday, September 5, 2018 at 4:13 PM
To: "onap-discuss@lists.onap.org" 
Subject: Re: [onap-discuss] [oom] 110 kubernetes pod limit increase for single 
node dev deployment testing - procedure

Hello

We need to work on a smaller footprint for testing purposes.

I agree that using a single VM can facilitate the work, but we also need to 
reduce the memory footprint.
Most of pods are consuming a lot of memory not necessary for simple tests.

I am currently working on a solution to reduce the global footprint with a 
target to lower the memory footprint for the vFW use-case as low as possible.

Best Regards

Eric

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12281): https://lists.onap.org/g/onap-discuss/message/12281
Mute This Topic: https://lists.onap.org/mt/25213556/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] #SO Is there a good way to send multiple requests as a batch to SO BPMN

[Urwashi]

Hi

I have requirement to send multiple requests to SO as a single batch event. Is 
there a way  to do this currently in a clean way? Any suggestions?


Thanks
Urwashi
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer 


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12280): https://lists.onap.org/g/onap-discuss/message/12280
Mute This Topic: https://lists.onap.org/mt/25239603/21656
Mute #so: https://lists.onap.org/mk?hashtag=so&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] Boostrapping AAF permissions and roles #aaf #aai

[Jimmy Forsyth]

Hi, Jonathan or other AAF SMEs,

What is your recommendation for seeding application permissions and assigning 
identities to roles?  Should AAI provide a set of roles/permissions that can be 
included with the seed scripts that are being run when instantiating demo 
environments?

We want to do something like this (taken from Pavel Paroulek’s page on the 
wiki, https://wiki.onap.org/x/c4JlAg)

role create org.onap.aai.resources_all
perm create org.onap.aai.resources * get org.onap.aai.resources_all
perm create org.onap.aai.resources * put org.onap.aai.resources_all
perm create org.onap.aai.resources * post org.onap.aai.resources_all
perm create org.onap.aai.resources * patch org.onap.aai.resources_all
perm create org.onap.aai.resources * delete org.onap.aai.resources_all
user role add d...@people.osaaf.org org.onap.aai.resources_all #just an 
example, add role to the correct user
role create org.onap.aai.resources_readonly
perm create org.onap.aai.resources * get org.onap.aai.resources_readonly

Thanks,
jimmy


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12279): https://lists.onap.org/g/onap-discuss/message/12279
Mute This Topic: https://lists.onap.org/mt/25239450/21656
Mute #aaf: https://lists.onap.org/mk?hashtag=aaf&subid=2740164
Mute #aai: https://lists.onap.org/mk?hashtag=aai&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] [PTL] Guava changes

[Gary Wu]

Hi PTLs,

Just a reminder to please review the pending changes on Guava for your 
respective projects:

https://gerrit.onap.org/r/#/q/status:open+INT-619

If it looks ok, please merge the pending changes.

If there are concerns, please add your comments and add a -1 vote to the change 
so we can follow up and address the concerns.

Thanks,
Gary



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12277): https://lists.onap.org/g/onap-discuss/message/12277
Mute This Topic: https://lists.onap.org/mt/25238669/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [integration] Problem with opening Jenkins logs

[Gary Wu]

Hi Marcin,

That link is not accessible due to enhanced Jenkins security requirements.  The 
workaround is as follows:


· Start from a particular build, e.g.: 
http://onapci.org/jenkins/job/windriver-oom-staging-daily/46/

· Click on “Browse results” (middle bottom) which goes to 
http://onapci.org/jenkins/job/windriver-oom-staging-daily/46/robot/

· Click on “Original result files” (middle of page), which goes to 
http://onapci.org/jenkins/job/windriver-oom-staging-daily/46/robot/report/

· Click on “all files in zip”

· Then you can open the output and log files from within the downloaded 
zip file.

Thanks,
Gary


From: onap-discuss@lists.onap.org [mailto:onap-discuss@lists.onap.org] On 
Behalf Of Przybysz, Marcin (Nokia - PL/Wroclaw)
Sent: Wednesday, September 05, 2018 10:52 PM
To: Yunxia Chen ; onap-discuss@lists.onap.org
Cc: ONAP, ODIE-WRO (Nokia - Global) 
Subject: Re: [onap-discuss] [integration]  Problem with opening Jenkins 
logs

Hi Helen,
Thank you for answer.

Those logs are not exactly what I’m looking for.
There is a report generated by Robot from test execution, which contains each 
particular step from each keyword with all parameters , all variables and 
outputs from every single line executed during robot test case.
It’s some example:
[cid:image001.jpg@01D445B7.F9860A70]

This log should be accessible for each build exactly in mentioned by me space
[cid:image002.png@01D445B7.F9860A70]

Somehow it’s not accessible, probably because of Jenkins configuration.

BR
Marcin

From: Yunxia Chen mailto:helen.c...@huawei.com>>
Sent: Wednesday, September 05, 2018 9:15 PM
To: onap-discuss@lists.onap.org; Przybysz, 
Marcin (Nokia - PL/Wroclaw) 
mailto:marcin.przyb...@nokia.com>>
Cc: ONAP, ODIE-WRO (Nokia - Global) 
mailto:odie-wro.o...@nokia.com>>
Subject: Re: [onap-discuss] [integration]  Problem with opening Jenkins 
logs

Hi, Marcin,

Could you try the following url? (That site was set privately, not from LF)

http://onapci.org/jenkins/

And from there, try the console output directly.
http://onapci.org/jenkins/job/windriver-sb02-oom-staging-manual/3/console

Or you could go to the real hosted site, those are from open labs, to find 
those logs as well.

Regards,

Helen Chen

From: onap-discuss 
mailto:onap-discuss@lists.onap.org>> on behalf of 
"Przybysz, Marcin (Nokia - PL/Wroclaw)" 
mailto:marcin.przyb...@nokia.com>>
Reply-To: onap-discuss 
mailto:onap-discuss@lists.onap.org>>, 
"marcin.przyb...@nokia.com" 
mailto:marcin.przyb...@nokia.com>>
Date: Wednesday, September 5, 2018 at 3:32 AM
To: onap-discuss 
mailto:onap-discuss@lists.onap.org>>
Cc: "ONAP, ODIE-WRO (Nokia - Global)" 
mailto:odie-wro.o...@nokia.com>>
Subject: [onap-discuss] [integration]  Problem with opening Jenkins logs

Hi,

I’m not able to view any Jenkins Robot report or log files from test execution. 
Example

I found out error message “Blocked script execution in '' because the 
document's frame is sandboxed and the 'allow-scripts' permission is not set.” 
in browser console and when I google it,  seems to be some lack of settings in 
Jenkins.

Are you familiar with this problem? Can someone help to solve it?

BR
Marcin



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12276): https://lists.onap.org/g/onap-discuss/message/12276
Mute This Topic: https://lists.onap.org/mt/25210739/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] [SO] about Benchmark specific Zoom meeting arrangement

[Hongliang Bian]

 

Hi Brian,

 

As we have discussed during yesterday Zoom meeting we can set up Benchmark 
specific meeting. I have discussed with my team, and they are OK to arrange the 
meeting at night in Beijing time for example either 9:00 or 10:00 pm.

Since we don’t want to occupy too much of your time and make the meeting more 
efficient, we think one meeting a week is OK. We can send email for ordinary 
discussion and leave the tough issue to the meeting. And also we are OK with 
any day during the weekday so please pick a day as you convenience. ThanksJ

 

BRs,

Hongliang

 

 

发件人: onap-discuss@lists.onap.org [mailto:onap-discuss@lists.onap.org] 代表 Brian
发送时间: 2018年8月29日 19:56
收件人: Liu Chenglong
抄送: SMOKOWSKI, STEVEN; onap-discuss@lists.onap.org; Kang Xi; huangzonghe; 孙鑫龙
主题: Re: [onap-discuss] [SO] vcpe use case and call openstack stack api

 

Generally SO records data in their request database but you should see the 
instance data in AAI.

 

Brian

 

 

From: Liu Chenglong  
Sent: Wednesday, August 29, 2018 4:02 AM
To: FREEMAN, BRIAN D 
Cc: Liu Chenglong ; SMOKOWSKI, STEVEN ; 
onap-discuss@lists.onap.org; Kang Xi ; huangzonghe 
; 孙鑫龙 
Subject: Re: [onap-discuss] [SO] vcpe use case and call openstack stack api

 

Hi, Brian:

  We want to know which database table can record vnf data or instance data 
or requests data  when  we create vcpe use case?

 

  And where are the tables located? SO or SDC or SDNC database?   How to 
check it?

 

 

 Like this, when we create vbrg instance by running vcpe.py brg script,  SO 
docker will record what data and write the data into which database tables when 
SO docker received vcpe’s request?

 

--

Regards,

Liu Chenglong

lcl7...@163.com

 

 

 

在 2018年8月28日，20:32，FREEMAN, BRIAN D  写道：

 

Cloud_config.json is created during restart of the docker – you should try 
without restarting but the base file is in   

 volumes /  

 mso /  

 chef-config /  

 mso-docker.json

 

Json_updater.py updates mso-docker.json

 

Json_updater.py takes input from so_vm_init.sh/deploy.sh to setup the cloud 
regions.

 

I think if you modify mso-docker.json and restart the docker (not reboot the 
VM) then chef should expands mso-docker.json into the files in 
/etc/mso/config.d.

 

For some reason I thought changes to the cloud_config could be done without a 
restart of the docker container but its been a while since I did a Beijing 
config change on SO.

 

Brian

 

 

From: SMOKOWSKI, STEVEN 
Sent: Tuesday, August 28, 2018 8:03 AM
To:   onap-discuss@lists.onap.org;  
 lcl7...@163.com; FREEMAN, BRIAN D < 
 bf1...@att.com>
Cc: Kang Xi <  kang...@huawei.com>; huangzonghe < 
 huangzh@chinatelecom.cn>; 孙鑫龙 < 
 sunxl@chinatelecom.cn>
Subject: Re: [onap-discuss] [SO] vcpe use case and call openstack stack api

 

In Casablanca this utilizes a database, making the cloud configuration easier 
to modify.  In Beijing you have to modify the json file directly.

 

Thanks

 

-Steve

 

 

From: <  onap-discuss@lists.onap.org> on 
behalf of Liu Chenglong <  lcl7...@163.com>
Reply-To: "  onap-discuss@lists.onap.org" < 
 onap-discuss@lists.onap.org>, " 
 lcl7...@163.com" <  
lcl7...@163.com>
Date: Tuesday, August 28, 2018 at 4:34 AM
To: "  onap

Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

[Srini]

Hi Bin,

I just replied to Ethan.  I think there was a confusion that HPA service will 
be added to Broker micro service.  No, we are not suggesting that.  It will be 
its own micro service and scale on its own.

Thanks
Srini


From: bin.y...@windriver.com [mailto:bin.y...@windriver.com]
Sent: Wednesday, September 5, 2018 11:07 PM
To: onap-discuss@lists.onap.org; ethanly...@vmware.com
Cc: Addepalli, Srinivasa R ; 
frank.sando...@oamtechnologies.com; Multanen, Eric W 
; Ranganathan, Dileep 
; Ramki Krishnan ; 
Ranganathan, Raghu 
Subject: RE: [onap-discuss] [MULTICLOUD] - HPA telemetry

Hi Ethan,

   I agree that the service should be separated from each other, 
and requesting a new repo is also a valid option. Thanks for your suggestion.

Best Regards,
Bin Yang,Solution Engineering Team,Wind River
ONAP Multi-VIM/Cloud PTL
Direct +86,10,84777126Mobile +86,13811391682Fax +86,10,64398189
Skype: yangbincs993

From: onap-discuss@lists.onap.org 
[mailto:onap-discuss@lists.onap.org] On Behalf Of ethanlynnl
Sent: Thursday, September 06, 2018 1:55 PM
To: onap-discuss; Yang, Bin
Cc: Addepalli, Srinivasa R; 
frank.sando...@oamtechnologies.com; 
Multanen, Eric W; Ranganathan, Dileep; Ramki Krishnan; Ranganathan, Raghu
Subject: Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

Hi Bin,
  I think it’s better to use a new repository to host HPA telemetry, since the 
broker are written in python and we need to consider the performance. If 
massing broker with telemetry, massive telemetries might downgrade the broker’s 
performance.


On 6 Sep 2018, at 9:33 AM, Yang Bin 
mailto:bin.y...@windriver.com>> wrote:

Hi Srini,

   I double checked that during last MultiCloud weekly meeting, and 
I didn’t hear any objection. So I am thinking it is okay to use multicloud 
framework repository to host the HPA telemetry.
However, before anyone starts the patch upstreaming, I would like to know the 
details of your seed codes, and see how it fit into the existing framework repo 
since there is already source code for multicloud broker there. We want to keep 
thing consistent and easy /straight forward to understand/maintain.

So I suggest that you or someone else will showcase the seed code to multicloud 
team and then decide how it should be proceeded.

Thanks.

Best Regards,
Bin Yang,Solution Engineering Team,Wind River
ONAP Multi-VIM/Cloud PTL
Direct +86,10,84777126Mobile +86,13811391682Fax +86,10,64398189
Skype: yangbincs993

From: Addepalli, Srinivasa R [mailto:srinivasa.r.addepa...@intel.com]
Sent: Thursday, September 06, 2018 1:26 AM
To: onap-discuss@lists.onap.org; Yang, Bin; 
frank.sando...@oamtechnologies.com
Cc: Multanen, Eric W; Ranganathan, Dileep; 
ram...@vmware.com; Ranganathan, Raghu
Subject: RE: [onap-discuss] [MULTICLOUD] - HPA telemetry

Thanks Bin. Let us know if everybody is okay to use framework repository or 
provide suggestions.

HPA telemetry is part of HPA umbrella and Alex presented to various committees 
for R3 additions. Dileep is working on A&AI schema changes and related changes 
needed in OOF. But in these architecture/use-case meetings, we don’t get into 
the details of repositories in each project and hence that part was not 
discussed. In both A&AI and OOF, no need to create any repositories. I hope 
that we don’t need to create any repository here too.  My view is that 
framework repo seems to be generic and since HPA telemetry is also generic, 
related software can be placed there. Let us know.

Thanks
Srini




From: onap-discuss@lists.onap.org 
[mailto:onap-discuss@lists.onap.org] On Behalf Of 
bounce+19846+12237+675801+2740...@lists.onap.org
Sent: Tuesday, September 4, 2018 8:18 PM
To: onap-discuss@lists.onap.org; Addepalli, 
Srinivasa R 
mailto:srinivasa.r.addepa...@intel.com>>; 
frank.sando...@oamtechnologies.com
Cc: Multanen, Eric W 
mailto:eric.w.multa...@intel.com>>; Ranganathan, 
Dileep mailto:dileep.ranganat...@intel.com>>; 
ram...@vmware.com; Ranganathan, Raghu 
mailto:rra...@ciena.com>>
Subject: Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

Hi Srini,

   Thanks for your feedback.  I will check with our team to see if 
any further question/concerns with regarding to this proposal.

It seems it is a new feature impacting multiple ONAP projects (MultiCloud, AAI, 
OOF, more? ), so I would also like to know whether this proposal has been 
presented to ARC subcommittee? What is the suggestion there?

Thanks

Best Regards,
Bin Yang,Solution Engineering Team,Wind River
ONAP Multi-VIM/Cloud PTL
Direct +86,10,84777126Mobile +86,13811391682   

Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

[Srini]

Hi Ethan,

We are not suggesting to add “HPA receiving service” to be part of the “Broker” 
micro service. It would be separate micro-service by itself and it will scale 
on itself.  We are only suggesting to use ‘framework’ repository to host the 
code & rules.  So, there is no performance issue. Agree?

Thanks
Srini


From: onap-discuss@lists.onap.org [mailto:onap-discuss@lists.onap.org] On 
Behalf Of ethanlynnl
Sent: Wednesday, September 5, 2018 10:55 PM
To: onap-discuss ; Yang, Bin 

Cc: Addepalli, Srinivasa R ; 
frank.sando...@oamtechnologies.com; Multanen, Eric W 
; Ranganathan, Dileep 
; Ramki Krishnan ; 
Ranganathan, Raghu 
Subject: Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

Hi Bin,
  I think it’s better to use a new repository to host HPA telemetry, since the 
broker are written in python and we need to consider the performance. If 
massing broker with telemetry, massive telemetries might downgrade the broker’s 
performance.


On 6 Sep 2018, at 9:33 AM, Yang Bin 
mailto:bin.y...@windriver.com>> wrote:

Hi Srini,

   I double checked that during last MultiCloud weekly meeting, and 
I didn’t hear any objection. So I am thinking it is okay to use multicloud 
framework repository to host the HPA telemetry.
However, before anyone starts the patch upstreaming, I would like to know the 
details of your seed codes, and see how it fit into the existing framework repo 
since there is already source code for multicloud broker there. We want to keep 
thing consistent and easy /straight forward to understand/maintain.

So I suggest that you or someone else will showcase the seed code to multicloud 
team and then decide how it should be proceeded.

Thanks.

Best Regards,
Bin Yang,Solution Engineering Team,Wind River
ONAP Multi-VIM/Cloud PTL
Direct +86,10,84777126Mobile +86,13811391682Fax +86,10,64398189
Skype: yangbincs993

From: Addepalli, Srinivasa R [mailto:srinivasa.r.addepa...@intel.com]
Sent: Thursday, September 06, 2018 1:26 AM
To: onap-discuss@lists.onap.org; Yang, Bin; 
frank.sando...@oamtechnologies.com
Cc: Multanen, Eric W; Ranganathan, Dileep; 
ram...@vmware.com; Ranganathan, Raghu
Subject: RE: [onap-discuss] [MULTICLOUD] - HPA telemetry

Thanks Bin. Let us know if everybody is okay to use framework repository or 
provide suggestions.

HPA telemetry is part of HPA umbrella and Alex presented to various committees 
for R3 additions. Dileep is working on A&AI schema changes and related changes 
needed in OOF. But in these architecture/use-case meetings, we don’t get into 
the details of repositories in each project and hence that part was not 
discussed. In both A&AI and OOF, no need to create any repositories. I hope 
that we don’t need to create any repository here too.  My view is that 
framework repo seems to be generic and since HPA telemetry is also generic, 
related software can be placed there. Let us know.

Thanks
Srini




From: onap-discuss@lists.onap.org 
[mailto:onap-discuss@lists.onap.org] On Behalf Of 
bounce+19846+12237+675801+2740...@lists.onap.org
Sent: Tuesday, September 4, 2018 8:18 PM
To: onap-discuss@lists.onap.org; Addepalli, 
Srinivasa R 
mailto:srinivasa.r.addepa...@intel.com>>; 
frank.sando...@oamtechnologies.com
Cc: Multanen, Eric W 
mailto:eric.w.multa...@intel.com>>; Ranganathan, 
Dileep mailto:dileep.ranganat...@intel.com>>; 
ram...@vmware.com; Ranganathan, Raghu 
mailto:rra...@ciena.com>>
Subject: Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

Hi Srini,

   Thanks for your feedback.  I will check with our team to see if 
any further question/concerns with regarding to this proposal.

It seems it is a new feature impacting multiple ONAP projects (MultiCloud, AAI, 
OOF, more? ), so I would also like to know whether this proposal has been 
presented to ARC subcommittee? What is the suggestion there?

Thanks

Best Regards,
Bin Yang,Solution Engineering Team,Wind River
ONAP Multi-VIM/Cloud PTL
Direct +86,10,84777126Mobile +86,13811391682Fax +86,10,64398189
Skype: yangbincs993

From: onap-discuss@lists.onap.org 
[mailto:onap-discuss@lists.onap.org] On Behalf Of Srini
Sent: Wednesday, September 05, 2018 3:24 AM
To: Yang, Bin; onap-discuss@lists.onap.org; 
frank.sando...@oamtechnologies.com
Cc: Multanen, Eric W; Ranganathan, Dileep; 
ram...@vmware.com; Ranganathan, Raghu
Subject: Re: [onap-discuss] [MULTICLOUD] - HPA telemetry

Hi Bin,

I try to answer some of the questions inline.

In regards to repository, I see following:


Since stats aggregation service is common across Cloud

Re: [onap-discuss] [oom] helm install local/onap fails - fix for #clamp #aaf #pomba

[Roger Maitland]

Hi George,

Unfortunately you got caught up in a nodeport conflict.  Nodeports provide the 
mechanism for external access to ports within an ONAP deployment and management 
of nodeport allocation is manual which resulted in this conflict. The OOM team 
is looking at alternative solutions to exposing all of these ports and in the 
short term Michael has generously re-allocated some ports to try to resolve the 
issue. Unless one deploys all of ONAP a nodeport conflict may not be seen after 
what seems like a simple fix so extra caution is advised when changing node 
ports.

Thanks for raising the issue.

Cheers,
Roger

From:  on behalf of George Clapp 

Reply-To: "onap-discuss@lists.onap.org" , 
"georgehcl...@gmail.com" 
Date: Wednesday, September 5, 2018 at 6:23 PM
To: "onap-discuss@lists.onap.org" 
Subject: Re: [onap-discuss] [oom] helm install local/onap fails - fix for 
#clamp #aaf #pomba

I tried to install again after another “helm delete –purge,” but there were a 
lot of residual components left after the failed earlier installation and then 
the delete.  I went into an etcd container and deleted all of the related 
entries and tried again, but got that same error.

Error: release onap failed: Service "dmaap-dr-prov" is invalid: 
spec.ports[0].nodePort: Invalid value: 30259: provided port is already allocated

I’ll revert to Beijing for the time being.

George

From: onap-discuss@lists.onap.org  On Behalf Of 
George Clapp
Sent: Wednesday, September 05, 2018 12:14 PM
To: onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] [OOM] helm install local/onap fails - fix for 
#clamp #aaf #pomba

I tried again to do a complete installation.  I checked out the master branch 
and did a pull to update and then entered:

sudo helm delete --purge development (the name I had used)

There were some residual deployments that survived the delete, most of them 
related to DMaaP.  I deleted them manually and then upgraded helm from 2.8.2 to 
2.9.1, removed and rebuilt the helm repo local, and did a ‘make all’ in 
oom/kubernetes.  I then entered:

sudo helm install local/onap -n onap --namespace onap

But got this error: Error: release onap failed: Service "dmaap-dr-prov" is 
invalid: spec.ports[0].nodePort: Invalid value: 30259: provided port is already 
allocated

I’m pretty sure that I had deleted all of the residual DMaaP deployments.  Any 
suggestions?

Thanks,
George

From: Michael O'Brien mailto:frank.obr...@amdocs.com>>
Sent: Tuesday, September 04, 2018 6:32 PM
To: onap-discuss@lists.onap.org; 
gary.i...@huawei.com; James MacNider 
mailto:james.macni...@amdocs.com>>; 
georgehcl...@gmail.com; 
sd3...@intl.att.com
Subject: RE: [onap-discuss] [OOM] helm install local/onap fails - fix for 
#clamp #aaf #pomba

Team,
AAF, CLAMP, POMBA, Integration, OOM,
As James has iterated – when you add/change a nodeport – do a full helm 
install/upgrade of your onap deployment – with “all” pods on – not just the vFW 
subset where several pods are disabled via –set .enabled=false – use 
the default/inferred deployment with no -f override.  Running a subset of onap 
for development, to fit in a 64g vm or to reduce the pod count is OK but when 
submitting run the full system if possible or at least your change with 
onap-minimal (the traditional vFW pods) – and then a 2nd deploy with the rest 
of ONAP for vCPE/vVOLTE (the parts that are normally disabled for vFW)

I put a fix in for clamp where they now have nodeport 58 (previously 
reserved for log/logdemonode) in 
https://wiki.onap.org/display/DW/OOM+NodePort+List  instead of the conflicted 
port with pomba – 34.
I’ll fix my ELK/log RI container to use 304xx later – it is not part of the 
requirements.yaml (it only shares the namespace) – so there is no conflict 
there until I bring up the 2nd deployment.
https://gerrit.onap.org/r/#/c/64545/
Tested and ready for merge.

Some background on 63235 - as we need a 304xx nodeport - this jira is 
really 2 parts (logging and exposing a new port) - we failed to test the 
conflict with pomba because my AWS CD system was temporarily not running - 
after the AAF/CLAMP merge for OOM-1174 in https://gerrit.onap.org/r/#/c/63235/
https://gerrit.onap.org/r/#/c/63235/1/kubernetes/clamp/values.yaml
https://git.onap.org/oom/tree/kubernetes/clamp/values.yaml#n98

reproduction:
amdocs@ubuntu:~/_dev/oom/kubernetes$ sudo helm upgrade -i onap local/onap 
--namespace onap -f dev.yaml
Error: UPGRADE FAILED: failed to create resource: Service "pomba-kibana" is 
invalid: spec.ports[0].nodePort: Invalid value: 30234: provided port is already 
allocated

See AAF enablement in CLAMP
https://jira.onap.org/browse/OOM-1174
https://jira.onap.org/browse/OOM-1364
duped to
https://jira.onap.org/browse/OOM-1366

To speed this up - and not have to goto 304/306xx - Giving aaf/clamp my last 
302 - 30258
https://git.onap.org

Re: [onap-discuss] [sdc][dcae-ds]

[Michael Lando]

You can use this:



Yes, there is a manual option for uploading the blueprint to SDC.

Please note the you should upload the artifact to the VF in the service, set 
the artifactType to be DCAE_INVENTORY_BLUEPRINT, the file name should have 
suffix of “event_proc_bp.yaml”



In more details:

In SDC:

  1.  open a service for editing -> go to Composition tab -> choose the VF in 
the canvas you wish to attach your artifact to (verify that the right tab is 
showing the info of the VF) -> in the right menu, select “deployment artifact”

[cid:image001.jpg@01D445F7.787C2EB0]



  1.  click on “Add Artifact”, select the artifact type, fill necessary fields 
and upload the artifact (pay attention your artifact has the suffix 
“event_proc_bp.yaml” - it was requested by DCAE inventory)



[cid:image002.jpg@01D445F7.787C2EB0]





  1.  After adding the artifact , you should checkin the service (you can do it 
from the UI of-course)
  2.  Distribution flow requires several steps: submit for testing, testing and 
certifying by user with tester role, approving for distribution by user with 
governor role and distribution by user with Ops role.












BR,

[Michael Lando]

AT&T Network Application Development * NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
***
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: michael.la...@intl.att.com

From: onap-discuss@lists.onap.org  On Behalf Of 
Xin Miao
Sent: Friday, August 31, 2018 13:48
To: Determe, Sebastien ; onap-discuss 

Subject: Re: [onap-discuss] [sdc][dcae-ds]



Hi，Seb,

Thank you for your quick response. Could you point me to the how-to of 
attaching a
blueprint to a VF in SDC?

BTW, you meant the blueprint for each of the DCAE component to be manually 
created first, right?

Is there an example of a complete CL blueprint?

Thanks a lot.

Xin Miao
M: +1-4692685226
E: xin.m...@huawei.com
From: Determe, Sebastien
To: 
onap-discussmailto:onap-discuss@lists.onap.org>>;Xin
 Miaomailto:xin.m...@huawei.com>>
Subject: RE: [sdc][dcae-ds]
Time: 2018-08-31 03:52:07

Hi,
Unless I’m mistaken, you can’t, as DCAE-ds is not part of the Beijing release.
I’m not even sure it will be delivered in Casablanca
You have to create manually the blueprint and attach it to a VF in SDC, then 
deploy it

Seb

From: onap-discuss@lists.onap.org 
mailto:onap-discuss@lists.onap.org>> On Behalf Of 
Xin Miao
Sent: Friday, August 31, 2018 7:52 AM
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [sdc][dcae-ds]

Anybody knows how to enable DCAE-DS plugin in SDC at the portal in Beijing 
Release? Or, point me to the right documents or demo?

Has anyone really use DCAE-DS to create CL blueprint for CLAMP in R2?

Thanks a lot!

Xin Miao
M: +1-4692685226
E: xin.m...@huawei.com


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12270): https://lists.onap.org/g/onap-discuss/message/12270
Mute This Topic: https://lists.onap.org/mt/25137075/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [SDC] Error while onboarding voLTE VNF Package

[Michael Lando]

What version of sdc are you using and what model are you trying to onboared?









BR,

[Michael Lando]

AT&T Network Application Development · NetCom
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: michael.la...@intl.att.com

From: onap-discuss@lists.onap.org  On Behalf Of 
Prakash via Lists.Onap.Org
Sent: Wednesday, August 22, 2018 12:31
To: onap-discuss@lists.onap.org
Cc: Lando,Michael ; EMPOROPULO, VITALIY 

Subject: [onap-discuss] [SDC] Error while onboarding voLTE VNF Package

I'm trying to onboard the voLTE certified VNF package from link: 
https://wiki.onap.org/display/DW/Data+Model+Interest+Group+2018-06-04+Meeting+Minutes

I have created the VSP and when i tried to import vf i get a error stating 
"Derived from resource template was not found" with the status code 400 ERROR 
Code: SVC4060.

Kindly help me get through.


--
Regards,
Prakas P,
Network and Technology IT,
VDSI - Olympia – Chennai
VoIP: 72184 | Direct: +91 44 4394 2184
Mailto  | prakas...@verizon.com

We Are 
VERIZON

INTEGRITY . RESPECT . PERFORMANCE EXCELLENCE . 
ACCOUNTABILITY


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12268): https://lists.onap.org/g/onap-discuss/message/12268
Mute This Topic: https://lists.onap.org/mt/24918337/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [onap-discuss] [SDC] #sdc How to enable Workflow Designer Plugin?

[Michael Lando]

Hi,
In beijing the work flow was not fully integrated into sdc.

You can do this only on the master branch for Casablanca.









BR,



AT&T Network Application Development · NetCom  
Tel Aviv | Tampa | Atlanta | New Jersey |Chicago
···
Office: +972 (3) 5451487
Mobile: +972 (54) 7833603
e-mail: michael.la...@intl.att.com

-Original Message-
From: onap-discuss@lists.onap.org  On Behalf Of 
David Perez
Sent: Thursday, September 06, 2018 14:38
To: onap-discuss@lists.onap.org
Subject: [onap-discuss] [SDC] #sdc How to enable Workflow Designer Plugin?

Hi all,



I am trying to enable the sdc-workflow-designer plugin in SDC UI in an 
OOM-based deployment (Beijing branch).

What would be the correct value for the workflowUrl env variable in 
~/oom/kubernetes/sdc/values.yaml? Is there any additional config needed?

The default value (10.0.2.15) does not seem to work. WFD UI is reachable if 
accessed outside SDC using http://:30256/



...

config:

  logstashServiceName: log-ls

  logstashPort: 5044

  environment:

dcaeUrl: 10.0.2.15

workflowUrl: 10.0.2.15  <=== ?

vnfRepoPort: 8702

…



Thanks

David



--

David Pérez Caparrós

Senior Innovation Engineer

Swisscom (Switzerland)

david.perezcapar...@swisscom.com









-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12266): https://lists.onap.org/g/onap-discuss/message/12266
Mute This Topic: https://lists.onap.org/mt/25236695/21656
Mute #sdc: https://lists.onap.org/mk?hashtag=sdc&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] [SDC] #sdc How to enable Workflow Designer Plugin?

[David Perez]

Hi all,

I am trying to enable the sdc-workflow-designer plugin in SDC UI in an 
OOM-based deployment (Beijing branch).
What would be the correct value for the workflowUrl env variable in 
~/oom/kubernetes/sdc/values.yaml? Is there any additional config needed?
The default value (10.0.2.15) does not seem to work. WFD UI is reachable if 
accessed outside SDC using http://:30256/

...
config:
  logstashServiceName: log-ls
  logstashPort: 5044
  environment:
dcaeUrl: 10.0.2.15
workflowUrl: 10.0.2.15  <=== ?
vnfRepoPort: 8702
…

Thanks
David

--
David Pérez Caparrós
Senior Innovation Engineer
Swisscom (Switzerland)
david.perezcapar...@swisscom.com


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12265): https://lists.onap.org/g/onap-discuss/message/12265
Mute This Topic: https://lists.onap.org/mt/25236695/21656
Mute #sdc: https://lists.onap.org/mk?hashtag=sdc&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] APPC is not healthy install error #oom #appc #install #opendaylight-releng

[jkzcristiano]

Dear all,

I am experiencing an issue during APPC service installation. I installed ONAP 
Beijing before (like 3-4 times) and never had that problem. So, it is strange. 
I tried to change images in values.yaml to older ones but the same issue (e.g., 
from 1.4.0-SNAPSHOT-latest to 1.4.0-SNAPSHOT-20180901T133033Z).

Below my APPC pods:

ubuntu@rancher:~/oom/kubernetes$ kubectl get pods --all-namespaces -o=wide | 
grep appc
onap          onap-appc-appc-0                                                  
   *1/2*       Running   *1*          14m       10.42.71.236    compute2
onap          onap-appc-appc-cdt-5778bf9685-9np7j                    1/1       
Running   0          14m       10.42.146.43    compute1
onap          onap-appc-appc-db-0                                               
 2/2       Running   0          14m       10.42.229.224   compute2
onap          onap-appc-appc-dgbuilder-75b9dc65c8-jdnqv          1/1       
Running   0          14m       10.42.189.225   compute1

The "onap-appc-appc-0" pod is restarted repeatedly as time goes by.

This is the output from K8s dashboard (this error also appears here ( 
https://wiki.onap.org/questions/36964316/beijing-install-pods-fails-to-start-and-openstack-configuration
 ) without any solution):

Readiness probe failed: APPC is not healthy. ++ ps -e ++ grep startODL ++ wc -l 
+ startODL_status=1 ++ /opt/opendaylight/current/bin/client bundle:list ++ grep 
Waiting ++ wc -l Failed to get the session. + waiting_bundles=0 ++ 
/opt/opendaylight/current/bin/client system:start-level Failed to get the 
session. + run_level= + '[' '' == 'Level 100' ']' + echo APPC is not healthy. + 
exit 1

Can you help me, please?

Kind Regards,

Xoan

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12264): https://lists.onap.org/g/onap-discuss/message/12264
Mute This Topic: https://lists.onap.org/mt/25236625/21656
Mute #oom: https://lists.onap.org/mk?hashtag=oom&subid=2740164
Mute #appc: https://lists.onap.org/mk?hashtag=appc&subid=2740164
Mute #install: https://lists.onap.org/mk?hashtag=install&subid=2740164
Mute #opendaylight-releng: 
https://lists.onap.org/mk?hashtag=opendaylight-releng&subid=2740164
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[onap-discuss] Problem to install onap sdc on kubernetes

[Rudolf Amirjanyan]

Installing onap SDC , all submodules (sdc-be, sdc-ce, etc) are okay
except sdc-act.

I have modified oom/kubernetes/sdc/charts/sdc-act/values.yaml and
changed the url of activity-spec from 1.3.0-snapshot to 1.2.0.

# application image
repository: nexus3.onap.org:10001
image: onap/activity-spec:1.2.0
configInitImage: onap/activity-spec-init:1.2.0

But still problem to install.

Please help to get the solution.

bellow are some commands I did to trouble shut..

>

from command line


root@serv2:~/onapinst/oom/kubernetes/sdc/charts/sdc-act# kubectl get
pods |grep sdc
br-sdc-sdc-act-848bff588d-kddr7   0/1  
Init:0/1   19 4h
br-sdc-sdc-be-6db7855f44-92v5k    2/2  
Running    0  4h
br-sdc-sdc-cs-66c744b574-pvw5c    1/1  
Running    0  4h
br-sdc-sdc-es-7f7c9f796-8jgjr 1/1  
Running    0  4h
br-sdc-sdc-fe-85d8798c95-rb7sp    2/2  
Running    0  4h
br-sdc-sdc-kb-945b76479-2zkp8 1/1  
Running    0  4h
br-sdc-sdc-onboarding-be-cdb85499c-9l6ms  2/2  
Running    0  4h
br-sdc-sdc-wfd-86c49df4d-cnw2l    1/1  
Running    0  4h


root@serv2:/home/rud-   kubectl logs br-sdc-sdc-act-848bff588d-kddr7

Error from server (BadRequest): container "sdc-act" in pod
"br-sdc-sdc-act-848bff588d-kddr7" is waiting to start: PodInitializing


root@serv2:/home/rud# kubectl describe pod br-sdc-sdc-act-848bff588d-kddr7
Name:   br-sdc-sdc-act-848bff588d-kddr7
Namespace:  default
Node:   onap0/41.220.208.10
Start Time: Thu, 06 Sep 2018 09:27:58 +0300
Labels: app=sdc-act
    pod-template-hash=4046991448
    release=br-sdc
Annotations:   
kubernetes.io/created-by={"kind":"SerializedReference","apiVersion":"v1","reference":{"kind":"ReplicaSet","namespace":"default","name":"br-sdc-sdc-act-848bff588d","uid":"ff59fc8c-b19d-11e8-b8c8-025971...
Status: Pending
IP: 10.42.221.225
Created By: ReplicaSet/br-sdc-sdc-act-848bff588d
Controlled By:  ReplicaSet/br-sdc-sdc-act-848bff588d
Init Containers:
  sdc-act-job-completion:
    Container ID: 
docker://13743bebdf9f8e705ee8012db588e9193565901e778d3d7fb703819f4e424b1d
    Image: oomk8s/readiness-check:2.0.0
    Image ID: 
docker-pullable://oomk8s/readiness-check@sha256:7daa08b81954360ad03364febcb3dcfeb723bcc12ce3eb3ed3e53f2323ed
    Port:  
    Command:
  /root/job_complete.py
    Args:
  --job-name
  br-sdc-sdc-act-init-activity-spec
    State:  Running
  Started:  Thu, 06 Sep 2018 13:06:44 +0300
    Last State: Terminated
  Reason:   Error
  Exit Code:    1
  Started:  Thu, 06 Sep 2018 12:56:37 +0300
  Finished: Thu, 06 Sep 2018 13:06:39 +0300
    Ready:  False
    Restart Count:  17
    Environment:
  NAMESPACE:  default (v1:metadata.namespace)
    Mounts:
  /var/run/secrets/kubernetes.io/serviceaccount from
default-token-prbm8 (ro)
Containers:
  sdc-act:
    Container ID:  
    Image:  nexus3.onap.org:10001/onap/activity-spec:1.2.0
    Image ID:  
    Port:   8080/TCP
    State:  Waiting
  Reason:   PodInitializing
    Ready:  False
    Restart Count:  0
    Liveness:   tcp-socket :8080 delay=60s timeout=1s period=10s
#success=1 #failure=3
    Readiness:  tcp-socket :8080 delay=60s timeout=1s period=10s
#success=1 #failure=3
    Environment:
  JAVA_OPTIONS:  -Xmx1536m -Xms1536m
    Mounts:
  /etc/onap/activity-spec/be/config from br-sdc-sdc-act-config (rw)
  /var/run/secrets/kubernetes.io/serviceaccount from
default-token-prbm8 (ro)
Conditions:
  Type   Status
  Initialized    False
  Ready  False
  PodScheduled   True
Volumes:
  br-sdc-sdc-act-config:
    Type:  ConfigMap (a volume populated by a ConfigMap)
    Name:  br-sdc-sdc-act-configmap
    Optional:  false
  default-token-prbm8:
    Type:    Secret (a volume populated by a Secret)
    SecretName:  default-token-prbm8
    Optional:    false
QoS Class:   BestEffort
Node-Selectors:  
Tolerations: node.alpha.kubernetes.io/notReady:NoExecute for 300s
 node.alpha.kubernetes.io/unreachable:NoExecute for 300s
Events:
  Type    Reason   Age    From    Message
      --          ---
  Normal  Started  55m (x13 over 3h)  kubelet, onap0  Started container
  Normal  Created  45m (x14 over 3h)  kubelet, onap0  Created container
  Normal  Pulling  4m (x18 over 3h)   kubelet, onap0  pulling image
"oomk8s/readiness-check:2.0.0"
  Normal  Pulled   4m (x18 over 3h)   kubelet, onap0  Successfully
pulled image "oomk8s/readiness-check:2.0.0"


from kubernetes dashboard -->


  Logs from 
  sdc-act-job
  CASSANDRA_HOST environment variable must be set



<-

Re: [onap-discuss] OOM Beijing HW requirements

[Michal Ptacek]

Thank you very much Michael, very useful link indeed

To be honest we already resigned on all-in-one deployments and doing mainly 3 
VMs deployment for Beijing ONAP,

One of the reasons was this 110 pods limit, but we had also another challenge 
for all-in-one (single VM) ONAP deployment

 

Rancher networking was collapsing in our case after some time (usually after 
24-36hrs), symptom was that when running „kubectl get cs“

there was failed etcd check, this problem disappeared when we moved rancher 
server to other node, so practically we thought that

having rancher server collocated with k8s master node is a bad idea, so I am 
wondering if there are really some working all-in-one ONAP deployments

which can run longer …. did you face the same problem ?

 

thanks again,

Michal

 

From: Michael O'Brien [mailto:frank.obr...@amdocs.com] 
Sent: Wednesday, September 5, 2018 10:26 PM
To: m.pta...@partner.samsung.com; onap-discuss@lists.onap.org
Subject: RE: [onap-discuss] OOM Beijing HW requirements

 

Michal,

   Hi, there is a procedure to increase the 110 limit here

https://lists.onap.org/g/onap-discuss/topic/oom_110_kubernetes_pod/25213556?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,25213556

   /michael

 

From: onap-discuss-boun...@lists.onap.org 
  
mailto:onap-discuss-boun...@lists.onap.org> > On Behalf Of Roger Maitland
Sent: Monday, May 7, 2018 11:38 AM
To: m.pta...@partner.samsung.com  ; 
onap-discuss@lists.onap.org  
Subject: Re: [onap-discuss] OOM Beijing HW requirements

 

Hi Michal,

 

The limit of 110 pods applies per node so if you add another node (or two) to 
your cluster you’ll avoid this problem. We’ve had problems in the past with 
multi-node configurations but that seems to be behind us.  I’ll put a note in 
the documentation – thanks for reporting the problem.

 

Cheers,
Roger

 

From: mailto:onap-discuss-boun...@lists.onap.org> > on behalf of Michal Ptacek 
mailto:m.pta...@partner.samsung.com> >
Reply-To: "m.pta...@partner.samsung.com  " 
mailto:m.pta...@partner.samsung.com> >
Date: Friday, May 4, 2018 at 11:08 AM
To: "onap-discuss@lists.onap.org  " 
mailto:onap-discuss@lists.onap.org> >
Subject: [onap-discuss] OOM Beijing HW requirements

 

 

Hi all,

 

I am trying to deploy latest ONAP (Beijing) using OOM (master branch) and I 
found some challenges using suggested HW resources for all-in-one (rancher 
server + k8s host on single node) deployment of ONAP:

 

HW resources:

*   24 VCPU 

*128G RAM 

*500G disc space 

*rhel7.4 os 

*rancher 1.6.14 

*kubernetes 1.8.10 

*helm 2.8.2 

*kubectl 1.8.12 

*docker 17.03-ce 

 

Problem:

some random pods are unable to spawn and are on "Pending" state with error "No 
nodes are available that match all of the predicates: Insufficient pods (1).“

 

Analyzis:

it seems that mine server can allocate max. 110 pods, which I found from 
"kubectl describe nodes" output

...

Allocatable:

cpu: 24

memory:  102861656Ki

pods:110

...

full ONAP deployment with all components enabled might be 120+ pods but I did 
not get even that 110 running,

maybe some race-condition for latest pods. If I disable 5+ components in 
onap/values.yaml, it will fit into that server but then it seems that "Minimum 
Hardware Configuration" described in

 

 
http://onap.readthedocs.io/en/latest/submodules/oom.git/docs/oom_cloud_setup_guide.html

is wrong (120GB RAM, 160G disc, 16vCPU)

 

or is there any hint how to increase that maximum number of allocatable pods ?

 

thanks,

Michal

 

 

 

 

 

 


 

 




  

 

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement, 

you may review at https://www.amdocs.com/about/email-disclaimer

This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement, 

you may review at https://www.amdocs.com/about/email-disclaimer



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#12262): https://lists.onap.org/g/onap-discuss/message/12262
Mute This Topic: https://lists.onap.org/mt/22460466/21656
Group Owner: onap-discuss+ow...@lists.onap.org
Unsubscribe: https://lists.onap.org/g/onap-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-