Re: [onap-discuss] OOM Resource Requirement

2018-01-08 Thread Gaurav Gupta (c)
Alex , Lusheng


Just one last question - does these resource requirement also considers 
resource and Network needed for vFW and vDNS Demo


thanks

Gaurav






From: JI, LUSHENG (LUSHENG) 
Sent: 05 January 2018 03:05:40
To: Alexis de Talhouët
Cc: Gaurav Gupta (c); onap-discuss@lists.onap.org
Subject: Re: [onap-discuss] OOM Resource Requirement


Thanks Alexis!

Lusheng



From: Alexis de Talhouët 
Date: Thursday, January 4, 2018 at 4:30 PM
To: "JI, LUSHENG (LUSHENG)" 
Cc: "Gaurav Gupta (c)" , "onap-discuss@lists.onap.org" 

Subject: Re: [onap-discuss] OOM Resource Requirement



Hi, yes, typo. I fixed. it.



I see, it’s based on my deployment. It used only m1.large flavor, which have 8 
vCPU, 16G RAM and 160G storage.

So based on what you just told me, here are the new accurate requirements:



HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses



OOM

  *   17 VM
  *   54 vCPU
  *   156 GB RAM
  *   1020 GB Storage
  *   15 floating IP addresses



DCAE itself

  *   15 VM
  *   44 vCPU
  *   88 GB RAM
  *   880 GB Storage
  *   15 floating IP addresses



Thanks,

Alexis





On Jan 4, 2018, at 4:24 PM, JI, LUSHENG (LUSHENG) 
mailto:l...@research.att.com>> wrote:



Alexis,



The 2GB RAM for DCAE is probably a typo?



Not sure what VM flavors you use in your deployment.  Among the 15 DCAE VMs, 7 
(CDAP/Hadoop cluster) need to be m1.large size (4 vCPU, 8G RAM, 80G storage) 
and the rest are m1.medium size (2 vCPUs, 4G RAM, 40G storage).



So the total should be 44 vCPUs, 88G RAM, and 880G disk.  The actual usage of 
disk is much smaller.  So if there were a flavor supporting smaller disks (e.g. 
20% of current values), the disk usage can be smaller.



Lusheng





From: 
mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>>
Date: Thursday, January 4, 2018 at 4:02 PM
To: "Gaurav Gupta (c)" mailto:guptagau...@vmware.com>>
Cc: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
mailto:onap-discuss@lists.onap.org>>
Subject: Re: [onap-discuss] OOM Resource Requirement



FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s footprint.



HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses

OOM

  *   17 VM
  *   123 vCPU
  *   294 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses

DCAE itself

  *   15 VM
  *   113 vCPU
  *   2 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses

Hope it helps,

Alexis



On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:



Guarav, here are the exact numbers for DCAE requirement.



15 instances

113 vCPU

226 GB RAM

2260 GB disk

15 floating IP




On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:



Gaurav, happy new year to you to! See answers inline.




On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) 
mailto:guptagau...@vmware.com>> wrote:



Alexis , Michael



Happy new year ,



I had couple of questions



a- about what is the Clean requirement for OOM in terms of Memory /vCPU if the 
closed loop demo needs to be attempted implying DCAE also to be part of .



AdT:

- 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk

- 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added some 
swap because in ONAP, most of the app are not always active, most of them are 
idle, so it's fine to let the host store dirty page in the swap memory.)

- 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s based 
on memory, I just torn down my setup, and I don’t recall well)








b - How many VM if we were to use Rancher based OOM Setup .



AdT: As specified above, only one VM for Rancher.




c - what is the release I should be using  if I were toinstall   amsterdam 
mainteance release .



AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.








thanks

Gaurav








___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread JI, LUSHENG (LUSHENG)
Thanks Alexis!
Lusheng

From: Alexis de Talhouët 
Date: Thursday, January 4, 2018 at 4:30 PM
To: "JI, LUSHENG (LUSHENG)" 
Cc: "Gaurav Gupta (c)" , "onap-discuss@lists.onap.org" 

Subject: Re: [onap-discuss] OOM Resource Requirement

Hi, yes, typo. I fixed. it.

I see, it’s based on my deployment. It used only m1.large flavor, which have 8 
vCPU, 16G RAM and 160G storage.
So based on what you just told me, here are the new accurate requirements:

HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses

OOM

  *   17 VM
  *   54 vCPU
  *   156 GB RAM
  *   1020 GB Storage
  *   15 floating IP addresses

DCAE itself

  *   15 VM
  *   44 vCPU
  *   88 GB RAM
  *   880 GB Storage
  *   15 floating IP addresses

Thanks,
Alexis



On Jan 4, 2018, at 4:24 PM, JI, LUSHENG (LUSHENG) 
mailto:l...@research.att.com>> wrote:

Alexis,

The 2GB RAM for DCAE is probably a typo?

Not sure what VM flavors you use in your deployment.  Among the 15 DCAE VMs, 7 
(CDAP/Hadoop cluster) need to be m1.large size (4 vCPU, 8G RAM, 80G storage) 
and the rest are m1.medium size (2 vCPUs, 4G RAM, 40G storage).

So the total should be 44 vCPUs, 88G RAM, and 880G disk.  The actual usage of 
disk is much smaller.  So if there were a flavor supporting smaller disks (e.g. 
20% of current values), the disk usage can be smaller.

Lusheng


From: 
mailto:onap-discuss-boun...@lists.onap.org>>
 on behalf of Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>>
Date: Thursday, January 4, 2018 at 4:02 PM
To: "Gaurav Gupta (c)" mailto:guptagau...@vmware.com>>
Cc: "onap-discuss@lists.onap.org<mailto:onap-discuss@lists.onap.org>" 
mailto:onap-discuss@lists.onap.org>>
Subject: Re: [onap-discuss] OOM Resource Requirement

FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s footprint.

HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses
OOM

  *   17 VM
  *   123 vCPU
  *   294 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses
DCAE itself

  *   15 VM
  *   113 vCPU
  *   2 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses
Hope it helps,
Alexis

On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

Guarav, here are the exact numbers for DCAE requirement.

15 instances
113 vCPU
226 GB RAM
2260 GB disk
15 floating IP



On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

Gaurav, happy new year to you to! See answers inline.



On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) 
mailto:guptagau...@vmware.com>> wrote:

Alexis , Michael

Happy new year ,

I had couple of questions

a- about what is the Clean requirement for OOM in terms of Memory /vCPU if the 
closed loop demo needs to be attempted implying DCAE also to be part of .

AdT:
- 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
- 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added some 
swap because in ONAP, most of the app are not always active, most of them are 
idle, so it's fine to let the host store dirty page in the swap memory.)
- 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s based 
on memory, I just torn down my setup, and I don’t recall well)





b - How many VM if we were to use Rancher based OOM Setup .

AdT: As specified above, only one VM for Rancher.



c - what is the release I should be using  if I were toinstall   amsterdam 
mainteance release .

AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.





thanks
Gaurav




___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread Alexis de Talhouët
Lusheng,

Ah that’s why it picked up the m1.xlarge in my setup. I just put a note to use 
m1.large instead, based on what you said.
I’ll update the heat stack in OOM accordingly to your update. Please add me as 
reviewer when you’re doing this, so I can track properly.

Thank you,
Alexis

> On Jan 4, 2018, at 4:33 PM, JI, LUSHENG (LUSHENG)  
> wrote:
> 
> Gaurav,
>  
> The issue is that in the Heat template, all DCAE VMs are set to m1.xlarge 
> dimension.  This is over provisioned.  Hence the wrong total resource use 
> numbers.  I will correct the Heat template for 1.0.1 release.
>  
> The corrected values for DCAE R1 should be:
> 15 VMs
> 44 vCPU
> 88 GB RAM
> 880 GB Storage
> 15 floating IP addresses
>  
> Lusheng
>  
> From:  on behalf of Alexis de Talhouët 
> 
> Date: Thursday, January 4, 2018 at 4:20 PM
> To: "Gaurav Gupta (c)" 
> Cc: "onap-discuss@lists.onap.org" 
> Subject: Re: [onap-discuss] OOM Resource Requirement
>  
> Ooops, typos, Here are the accurate values 
>  
> HEAT
> 29 VM
> 148 vCPU
> 336 GB RAM
> 3 TB Storage
> 29 floating IP addresses
>  
> OOM
> 17 VM
> 123 vCPU
> 294 GB RAM
> 2300 GB Storage
> 15 floating IP addresses
>  
> DCAE itself
> 15 VM
> 113 vCPU
> 226 GB RAM
> 2300 GB Storage
> 15 floating IP addresses
>  
> 
> 
>> On Jan 4, 2018, at 4:02 PM, Alexis de Talhouët > <mailto:adetalhoue...@gmail.com>> wrote:
>>  
>> FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
>> for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s 
>> footprint.
>>  
>> HEAT
>> 29 VM
>> 148 vCPU
>> 336 GB RAM
>> 3 TB Storage
>> 29 floating IP addresses
>> OOM
>> 17 VM
>> 123 vCPU
>> 294 GB RAM
>> 2300 TB Storage
>> 15 floating IP addresses
>> DCAE itself
>> 15 VM
>> 113 vCPU
>> 2 GB RAM
>> 2300 TB Storage
>> 15 floating IP addresses
>> Hope it helps,
>> Alexis
>>  
>>> On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët >> <mailto:adetalhoue...@gmail.com>> wrote:
>>>  
>>> Guarav, here are the exact numbers for DCAE requirement.
>>>  
>>> 15 instances
>>> 113 vCPU 
>>> 226 GB RAM
>>> 2260 GB disk
>>> 15 floating IP
>>> 
>>> 
>>>> On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët >>> <mailto:adetalhoue...@gmail.com>> wrote:
>>>>  
>>>> Gaurav, happy new year to you to! See answers inline.
>>>> 
>>>> 
>>>>> On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) >>>> <mailto:guptagau...@vmware.com>> wrote:
>>>>>  
>>>>> Alexis , Michael 
>>>>>  
>>>>> Happy new year ,
>>>>>  
>>>>> I had couple of questions 
>>>>>  
>>>>> a- about what is the Clean requirement for OOM in terms of Memory /vCPU 
>>>>> if the closed loop demo needs to be attempted implying DCAE also to be 
>>>>> part of . 
>>>>  
>>>> AdT:
>>>> - 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
>>>> - 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added 
>>>> some swap because in ONAP, most of the app are not always active, most of 
>>>> them are idle, so it's fine to let the host store dirty page in the swap 
>>>> memory.)
>>>> - 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s 
>>>> based on memory, I just torn down my setup, and I don’t recall well)
>>>>  
>>>>  
>>>> 
>>>> 
>>>>> b - How many VM if we were to use Rancher based OOM Setup .
>>>>  
>>>> AdT: As specified above, only one VM for Rancher.
>>>> 
>>>> 
>>>>> c - what is the release I should be using  if I were toinstall   
>>>>> amsterdam mainteance release . 
>>>>  
>>>> AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.
>>>> 
>>>> 
>>>>>  
>>>>>  
>>>>> thanks 
>>>>> Gaurav 
>>>> 
>>>>  
>>> 
>>>  
>> 
>>  
> 
>  

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread JI, LUSHENG (LUSHENG)
Gaurav,

The issue is that in the Heat template, all DCAE VMs are set to m1.xlarge 
dimension.  This is over provisioned.  Hence the wrong total resource use 
numbers.  I will correct the Heat template for 1.0.1 release.

The corrected values for DCAE R1 should be:

  *   15 VMs
  *   44 vCPU
  *   88 GB RAM
  *   880 GB Storage
  *   15 floating IP addresses

Lusheng

From:  on behalf of Alexis de Talhouët 

Date: Thursday, January 4, 2018 at 4:20 PM
To: "Gaurav Gupta (c)" 
Cc: "onap-discuss@lists.onap.org" 
Subject: Re: [onap-discuss] OOM Resource Requirement

Ooops, typos, Here are the accurate values

HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses

OOM

  *   17 VM
  *   123 vCPU
  *   294 GB RAM
  *   2300 GB Storage
  *   15 floating IP addresses

DCAE itself

  *   15 VM
  *   113 vCPU
  *   226 GB RAM
  *   2300 GB Storage
  *   15 floating IP addresses



On Jan 4, 2018, at 4:02 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s footprint.

HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses
OOM

  *   17 VM
  *   123 vCPU
  *   294 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses
DCAE itself

  *   15 VM
  *   113 vCPU
  *   2 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses
Hope it helps,
Alexis

On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

Guarav, here are the exact numbers for DCAE requirement.

15 instances
113 vCPU
226 GB RAM
2260 GB disk
15 floating IP


On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

Gaurav, happy new year to you to! See answers inline.


On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) 
mailto:guptagau...@vmware.com>> wrote:

Alexis , Michael

Happy new year ,

I had couple of questions

a- about what is the Clean requirement for OOM in terms of Memory /vCPU if the 
closed loop demo needs to be attempted implying DCAE also to be part of .

AdT:
- 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
- 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added some 
swap because in ONAP, most of the app are not always active, most of them are 
idle, so it's fine to let the host store dirty page in the swap memory.)
- 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s based 
on memory, I just torn down my setup, and I don’t recall well)




b - How many VM if we were to use Rancher based OOM Setup .

AdT: As specified above, only one VM for Rancher.


c - what is the release I should be using  if I were toinstall   amsterdam 
mainteance release .

AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.




thanks
Gaurav




___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread Alexis de Talhouët
Hi, yes, typo. I fixed. it.

I see, it’s based on my deployment. It used only m1.large flavor, which have 8 
vCPU, 16G RAM and 160G storage.
So based on what you just told me, here are the new accurate requirements:

HEAT
29 VM
148 vCPU
336 GB RAM
3 TB Storage
29 floating IP addresses

OOM
17 VM
54 vCPU
156 GB RAM
1020 GB Storage
15 floating IP addresses

DCAE itself
15 VM
44 vCPU
88 GB RAM
880 GB Storage
15 floating IP addresses

Thanks,
Alexis


> On Jan 4, 2018, at 4:24 PM, JI, LUSHENG (LUSHENG)  
> wrote:
> 
> Alexis,
>  
> The 2GB RAM for DCAE is probably a typo?
>  
> Not sure what VM flavors you use in your deployment.  Among the 15 DCAE VMs, 
> 7 (CDAP/Hadoop cluster) need to be m1.large size (4 vCPU, 8G RAM, 80G 
> storage) and the rest are m1.medium size (2 vCPUs, 4G RAM, 40G storage).
>  
> So the total should be 44 vCPUs, 88G RAM, and 880G disk.  The actual usage of 
> disk is much smaller.  So if there were a flavor supporting smaller disks 
> (e.g. 20% of current values), the disk usage can be smaller.
>  
> Lusheng
>  
>  
> From:  on behalf of Alexis de Talhouët 
> 
> Date: Thursday, January 4, 2018 at 4:02 PM
> To: "Gaurav Gupta (c)" 
> Cc: "onap-discuss@lists.onap.org" 
> Subject: Re: [onap-discuss] OOM Resource Requirement
>  
> FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
> for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s 
> footprint.
>  
> HEAT
> 29 VM
> 148 vCPU
> 336 GB RAM
> 3 TB Storage
> 29 floating IP addresses
> OOM
> 17 VM
> 123 vCPU
> 294 GB RAM
> 2300 TB Storage
> 15 floating IP addresses
> DCAE itself
> 15 VM
> 113 vCPU
> 2 GB RAM
> 2300 TB Storage
> 15 floating IP addresses
> Hope it helps,
> Alexis
>  
>> On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët > <mailto:adetalhoue...@gmail.com>> wrote:
>>  
>> Guarav, here are the exact numbers for DCAE requirement.
>>  
>> 15 instances
>> 113 vCPU 
>> 226 GB RAM
>> 2260 GB disk
>> 15 floating IP
>> 
>> 
>>> On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët >> <mailto:adetalhoue...@gmail.com>> wrote:
>>>  
>>> Gaurav, happy new year to you to! See answers inline.
>>> 
>>> 
>>>> On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) >>> <mailto:guptagau...@vmware.com>> wrote:
>>>>  
>>>> Alexis , Michael 
>>>>  
>>>> Happy new year ,
>>>>  
>>>> I had couple of questions 
>>>>  
>>>> a- about what is the Clean requirement for OOM in terms of Memory /vCPU if 
>>>> the closed loop demo needs to be attempted implying DCAE also to be part 
>>>> of . 
>>>  
>>> AdT:
>>> - 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
>>> - 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added 
>>> some swap because in ONAP, most of the app are not always active, most of 
>>> them are idle, so it's fine to let the host store dirty page in the swap 
>>> memory.)
>>> - 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s 
>>> based on memory, I just torn down my setup, and I don’t recall well)
>>>  
>>>  
>>> 
>>> 
>>>> b - How many VM if we were to use Rancher based OOM Setup .
>>>  
>>> AdT: As specified above, only one VM for Rancher.
>>> 
>>> 
>>>> c - what is the release I should be using  if I were toinstall   amsterdam 
>>>> mainteance release . 
>>>  
>>> AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.
>>> 
>>> 
>>>>  
>>>>  
>>>> thanks 
>>>> Gaurav 
>>> 
>>>  
>> 
>>  
> 
>  

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread JI, LUSHENG (LUSHENG)
Alexis,

The 2GB RAM for DCAE is probably a typo?

Not sure what VM flavors you use in your deployment.  Among the 15 DCAE VMs, 7 
(CDAP/Hadoop cluster) need to be m1.large size (4 vCPU, 8G RAM, 80G storage) 
and the rest are m1.medium size (2 vCPUs, 4G RAM, 40G storage).

So the total should be 44 vCPUs, 88G RAM, and 880G disk.  The actual usage of 
disk is much smaller.  So if there were a flavor supporting smaller disks (e.g. 
20% of current values), the disk usage can be smaller.

Lusheng


From:  on behalf of Alexis de Talhouët 

Date: Thursday, January 4, 2018 at 4:02 PM
To: "Gaurav Gupta (c)" 
Cc: "onap-discuss@lists.onap.org" 
Subject: Re: [onap-discuss] OOM Resource Requirement

FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s footprint.

HEAT

  *   29 VM
  *   148 vCPU
  *   336 GB RAM
  *   3 TB Storage
  *   29 floating IP addresses
OOM

  *   17 VM
  *   123 vCPU
  *   294 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses
DCAE itself

  *   15 VM
  *   113 vCPU
  *   2 GB RAM
  *   2300 TB Storage
  *   15 floating IP addresses
Hope it helps,
Alexis

On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

Guarav, here are the exact numbers for DCAE requirement.

15 instances
113 vCPU
226 GB RAM
2260 GB disk
15 floating IP


On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët 
mailto:adetalhoue...@gmail.com>> wrote:

Gaurav, happy new year to you to! See answers inline.


On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) 
mailto:guptagau...@vmware.com>> wrote:

Alexis , Michael

Happy new year ,

I had couple of questions

a- about what is the Clean requirement for OOM in terms of Memory /vCPU if the 
closed loop demo needs to be attempted implying DCAE also to be part of .

AdT:
- 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
- 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added some 
swap because in ONAP, most of the app are not always active, most of them are 
idle, so it's fine to let the host store dirty page in the swap memory.)
- 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s based 
on memory, I just torn down my setup, and I don’t recall well)




b - How many VM if we were to use Rancher based OOM Setup .

AdT: As specified above, only one VM for Rancher.


c - what is the release I should be using  if I were toinstall   amsterdam 
mainteance release .

AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.




thanks
Gaurav



___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread Alexis de Talhouët
Ooops, typos, Here are the accurate values

HEAT
29 VM
148 vCPU
336 GB RAM
3 TB Storage
29 floating IP addresses

OOM
17 VM
123 vCPU
294 GB RAM
2300 GB Storage
15 floating IP addresses

DCAE itself
15 VM
113 vCPU
226 GB RAM
2300 GB Storage
15 floating IP addresses


> On Jan 4, 2018, at 4:02 PM, Alexis de Talhouët  
> wrote:
> 
> FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
> for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s 
> footprint.
> 
> HEAT
> 29 VM
> 148 vCPU
> 336 GB RAM
> 3 TB Storage
> 29 floating IP addresses
> OOM
> 17 VM
> 123 vCPU
> 294 GB RAM
> 2300 TB Storage
> 15 floating IP addresses
> DCAE itself
> 15 VM
> 113 vCPU
> 2 GB RAM
> 2300 TB Storage
> 15 floating IP addresses
> Hope it helps,
> Alexis
> 
>> On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët > > wrote:
>> 
>> Guarav, here are the exact numbers for DCAE requirement.
>> 
>> 15 instances
>> 113 vCPU
>> 226 GB RAM
>> 2260 GB disk
>> 15 floating IP
>> 
>>> On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët >> > wrote:
>>> 
>>> Gaurav, happy new year to you to! See answers inline.
>>> 
 On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) >>> > wrote:
 
 Alexis , Michael 
 
 Happy new year ,
 
 I had couple of questions 
 
 a- about what is the Clean requirement for OOM in terms of Memory /vCPU if 
 the closed loop demo needs to be attempted implying DCAE also to be part 
 of . 
>>> 
>>> AdT:
>>> - 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
>>> - 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added 
>>> some swap because in ONAP, most of the app are not always active, most of 
>>> them are idle, so it's fine to let the host store dirty page in the swap 
>>> memory.)
>>> - 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s 
>>> based on memory, I just torn down my setup, and I don’t recall well)
>>> 
>>> 
>>> 
 b - How many VM if we were to use Rancher based OOM Setup .
>>> 
>>> AdT: As specified above, only one VM for Rancher.
>>> 
 c - what is the release I should be using  if I were toinstall   amsterdam 
 mainteance release . 
>>> 
>>> AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.
>>> 
 
 
 thanks 
 Gaurav 
>>> 
>> 
> 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread Alexis de Talhouët
FYI, I’ve just made the comparison with the HEAT requirements. The footprint 
for OOM is slightly smaller, but actually, it’s more than 80% DCAE’s footprint.

HEAT
29 VM
148 vCPU
336 GB RAM
3 TB Storage
29 floating IP addresses
OOM
17 VM
123 vCPU
294 GB RAM
2300 TB Storage
15 floating IP addresses
DCAE itself
15 VM
113 vCPU
2 GB RAM
2300 TB Storage
15 floating IP addresses
Hope it helps,
Alexis

> On Jan 4, 2018, at 3:46 PM, Alexis de Talhouët  
> wrote:
> 
> Guarav, here are the exact numbers for DCAE requirement.
> 
> 15 instances
> 113 vCPU
> 226 GB RAM
> 2260 GB disk
> 15 floating IP
> 
>> On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët > > wrote:
>> 
>> Gaurav, happy new year to you to! See answers inline.
>> 
>>> On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) >> > wrote:
>>> 
>>> Alexis , Michael 
>>> 
>>> Happy new year ,
>>> 
>>> I had couple of questions 
>>> 
>>> a- about what is the Clean requirement for OOM in terms of Memory /vCPU if 
>>> the closed loop demo needs to be attempted implying DCAE also to be part of 
>>> . 
>> 
>> AdT:
>> - 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
>> - 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added 
>> some swap because in ONAP, most of the app are not always active, most of 
>> them are idle, so it's fine to let the host store dirty page in the swap 
>> memory.)
>> - 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s 
>> based on memory, I just torn down my setup, and I don’t recall well)
>> 
>> 
>> 
>>> b - How many VM if we were to use Rancher based OOM Setup .
>> 
>> AdT: As specified above, only one VM for Rancher.
>> 
>>> c - what is the release I should be using  if I were toinstall   amsterdam 
>>> mainteance release . 
>> 
>> AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.
>> 
>>> 
>>> 
>>> thanks 
>>> Gaurav 
>> 
> 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread Alexis de Talhouët
Guarav, here are the exact numbers for DCAE requirement.

15 instances
113 vCPU
226 GB RAM
2260 GB disk
15 floating IP

> On Jan 4, 2018, at 12:22 PM, Alexis de Talhouët  
> wrote:
> 
> Gaurav, happy new year to you to! See answers inline.
> 
>> On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c) > > wrote:
>> 
>> Alexis , Michael 
>> 
>> Happy new year ,
>> 
>> I had couple of questions 
>> 
>> a- about what is the Clean requirement for OOM in terms of Memory /vCPU if 
>> the closed loop demo needs to be attempted implying DCAE also to be part of 
>> . 
> 
> AdT:
> - 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
> - 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added 
> some swap because in ONAP, most of the app are not always active, most of 
> them are idle, so it's fine to let the host store dirty page in the swap 
> memory.)
> - 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s 
> based on memory, I just torn down my setup, and I don’t recall well)
> 
> 
> 
>> b - How many VM if we were to use Rancher based OOM Setup .
> 
> AdT: As specified above, only one VM for Rancher.
> 
>> c - what is the release I should be using  if I were toinstall   amsterdam 
>> mainteance release . 
> 
> AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.
> 
>> 
>> 
>> thanks 
>> Gaurav 
> 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss


Re: [onap-discuss] OOM Resource Requirement

2018-01-04 Thread Alexis de Talhouët
Gaurav, happy new year to you to! See answers inline.

> On Jan 4, 2018, at 12:14 PM, Gaurav Gupta (c)  wrote:
> 
> Alexis , Michael 
> 
> Happy new year ,
> 
> I had couple of questions 
> 
> a- about what is the Clean requirement for OOM in terms of Memory /vCPU if 
> the closed loop demo needs to be attempted implying DCAE also to be part of . 

AdT:
- 1 VM for rancher: 2 vCPU - 4 GO RAM - 40 GO disk
- 1 VM for ONAP - 8 vCPUS - 64 GO RAM - 100 GO disk - 16 GO swap (I added some 
swap because in ONAP, most of the app are not always active, most of them are 
idle, so it's fine to let the host store dirty page in the swap memory.)
- 14 VMs for DCAE - 130 vCPUS - 300 GO RAM - 1.5 TO disk (note: this it’s based 
on memory, I just torn down my setup, and I don’t recall well)



> b - How many VM if we were to use Rancher based OOM Setup .

AdT: As specified above, only one VM for Rancher.

> c - what is the release I should be using  if I were toinstall   amsterdam 
> mainteance release . 

AdT: OOM amsterdam branch. Note: DCAE isn’t yet merged.

> 
> 
> thanks 
> Gaurav 

___
onap-discuss mailing list
onap-discuss@lists.onap.org
https://lists.onap.org/mailman/listinfo/onap-discuss