Re: [OE-core] devtool deploy-target fails with "no files to deploy"

[Khem Raj]

On Thu, Jan 18, 2018 at 4:46 AM, Håkan Eriksson  wrote:

> Hi!
>
>
> This is my first post to this mailing list, so I want to start by
> apologizing if I go about it in the wrong way, but the impression I got on
> http://lists.openembedded.org/mailman/listinfo/openembedded-core was that
> it's OK to simply email the list. I have searched for answers first, both
> in the list archives and the internet in general, but no luck. This makes
> me believe that it probably is something wrong in our
> configuration/implementation, but I have no clue of what.
>
>
> We are using Yocto to build Linux for an NXP imx7 device. Everything works
> OK, so the setup we have (which I believe is based on the imx7dsabresd
> machine) at least does that right.
>
>
> At the moment I am trying to evaluate eSDK, so I have built it, installed
> it, and used it a little bit, but when I tried to deploy to target, devtool
> failed to find any files to deploy. The files are there, though, but not in
> the place where devtool is searching; the built binaries all are under
> tmp/work/armv7at2hf-neon-fslc-linux-gnueabi, and devtool tries to find
> them under tmp/work/armv7ahf-neon-fslc-linux-gnueabi.
>
>
> So, something seems to be wrong in the setup of hardware target (armv7at2hf
> vs. armv7ahf)? I cannot figure out what, though, since bitbake uses the
> same config files to build our image as well as the eSDK.
>
>
>
​does this recipe have ARM_INSTRUCTION_SET = "arm" set explicitly ?
it seems you have 'thumb' enabled as machine feature may be via
DEFAULT_TUNE​



> By the way, using devtool the same way (deploy-target) on a recipe in our
> normal bitbake environment produces the same kind of error. So, come to
> think of it, it's probably not a problem with eSDK as such.
>
>
> Best regards,
>
> Håkan Eriksson
>
>
> Openembedded-core Info Page
> 
> lists.openembedded.org
> To see the collection of prior postings to the list, visit the
> Openembedded-core Archives. Using Openembedded-core: To post a message to
> all the list ...
>
>
> --
> ___
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>
>
-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

[OE-core] devtool deploy-target fails with "no files to deploy"

[Håkan Eriksson]

Hi!


This is my first post to this mailing list, so I want to start by apologizing 
if I go about it in the wrong way, but the impression I got on 
http://lists.openembedded.org/mailman/listinfo/openembedded-core was that it's 
OK to simply email the list. I have searched for answers first, both in the 
list archives and the internet in general, but no luck. This makes me believe 
that it probably is something wrong in our configuration/implementation, but I 
have no clue of what.


We are using Yocto to build Linux for an NXP imx7 device. Everything works OK, 
so the setup we have (which I believe is based on the imx7dsabresd machine) at 
least does that right.


At the moment I am trying to evaluate eSDK, so I have built it, installed it, 
and used it a little bit, but when I tried to deploy to target, devtool failed 
to find any files to deploy. The files are there, though, but not in the place 
where devtool is searching; the built binaries all are under 
tmp/work/armv7at2hf-neon-fslc-linux-gnueabi, and devtool tries to find them 
under tmp/work/armv7ahf-neon-fslc-linux-gnueabi.


So, something seems to be wrong in the setup of hardware target (armv7at2hf vs. 
armv7ahf)? I cannot figure out what, though, since bitbake uses the same config 
files to build our image as well as the eSDK.


By the way, using devtool the same way (deploy-target) on a recipe in our 
normal bitbake environment produces the same kind of error. So, come to think 
of it, it's probably not a problem with eSDK as such.


Best regards,

Håkan Eriksson



Openembedded-core Info 
Page
lists.openembedded.org
To see the collection of prior postings to the list, visit the 
Openembedded-core Archives. Using Openembedded-core: To post a message to all 
the list ...


-- 
___
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core