Re: a780 JTAG pinouts
Hi Matt! On Dienstag, 15. Mai 2007, Matt Wall wrote: [.. pst flashes with errors, bootloader still works ...] http://www.alternativemicrosystems.com/a780/initialphone.jpg There is an alternative to PST: linux 2.6 + mtdutils. 1. Build angstrom, including mtd-utils http://www.angstrom-distribution.org/ http://www.openembedded.org/ 2. Copy the image to the microSD Card 3. Get Phone into bootloader mode, load kernel with boot_usb 4. Connect to the phone trough usb + ssh 5. load the various mtd-kernel-modules 6. decide witch /dev/mtd* you want to flash, use flash_unlock and flashcp (or dd) to flash But before you try that all, just try if the phone could boot_usb a kernel at all. Various zImages are at http://people.openezx.org/ boot_usb is located at http://svn.openezx.org/trunk/src/host/boot_usb/ Yours, Simon N.
Re: a780 JTAG Pinouts
On Sat, May 19, 2007 at 03:28:10AM -0400, Matt Wall wrote: story behind the problem. I took a picture with the camera. douring the process it froze the camera. I could not power it down with the power button at all. I removed the batt, let it sit for a minute or two, then i put it back in. it would not power back up. I was able to get it to the boot loader menu to attempt a reflash and got those errors every time i tried to flash. however here are some error logs in case anyone cares and thanks for all the help guys. even if this does end up a paperweight you guys have been very helpful ERROR: Phone[]: The Secure_Motorola_Flash Interface could not be found. Hi. I'm sorry, but looks like it's really hardware problems. Maybe you should contact motorola service center. -- WBR, Dmitry signature.asc Description: Digital signature
a780 JTAG Pinouts
story behind the problem. I took a picture with the camera. douring the process it froze the camera. I could not power it down with the power button at all. I removed the batt, let it sit for a minute or two, then i put it back in. it would not power back up. I was able to get it to the boot loader menu to attempt a reflash and got those errors every time i tried to flash. Also it will be interesting if you will upload bootloader CG a020 with boot_usb or with ezxflash and look to lsusb -v messages after this. as for that i've not jumped in deep enough to really give you a good answer to your question. however here are some error logs in case anyone cares and thanks for all the help guys. even if this does end up a paperweight you guys have been very helpful - 20:09:07, December 17, 2005 Line: 139 ERROR: F:\Documents and Settings\matt\Desktop\OD\UNUSED1\780 monster\r52\R52_G_0D.74.A2R_0D.C0.B1P_SE6822AD3B1_L001_S011_P004_SE6822AD3B1025_full.hmg was not found. File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp 20:09:14, December 17, 2005 Line: 139 ERROR: F:\Documents and Settings\matt\Desktop\OD\UNUSED1\780 monster\r52\R52_G_0D.74.A2R_0D.C0.B1P_SE6822AD3B1_L001_S011_P004_SE6822AD3B1025_full.hmg was not found. File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp 20:10:20, December 17, 2005 Line: 3922 ERROR: Phone[]: The Secure_Motorola_Flash Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secure and for reflash. File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp 20:25:37, December 17, 2005 Line: 3922 ERROR: Interface AP-OS: Error Flashing Subscriber Unit Error 0xE0020086 while sending address 0x8C18000. File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp 20:25:37, December 17, 2005 Line: 3922 ERROR: Phone[]: *Flash FAILED!!!* File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp 20:26:28, December 17, 2005 Line: 3922 ERROR: Phone[]: ***Error*** Unable to connect to the Subscriber Unit. Unable to get string descriptors. File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp --- and - 23:12:51, December 01, 2005 Line: 139 ERROR: F:\Documents and Settings\matt\Desktop\780 monster\R52_G_0D[1].74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full\R52_G_0D.74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full.hmg was not found. File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp 01:32:45, December 02, 2005 Line: 139 ERROR: F:\Documents and Settings\matt\Desktop\780 monster\R52_G_0D[1].74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full\R52_G_0D.74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full.hmg was not found. File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp 19:08:15, December 17, 2005 Line: 139 ERROR: F:\Documents and Settings\matt\Desktop\OD\UNUSED1\780 monster\R52_G_0D[1].74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full\R52_G_0D.74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full.hmg was not found. File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp 19:08:40, December 17, 2005 Line: 139 ERROR: F:\Documents and Settings\matt\Desktop\OD\UNUSED1\780 monster\R52_G_0D[1].74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full\R52_G_0D.74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA78E1025_full.hmg was not found. File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp 19:09:46, December 17, 2005 Line: 3922 ERROR: Phone[]: The Secure_Motorola_Flash Interface could not be found. The super-file is secure and for re-flash; the phone needs a super-file that is not secure and for reflash. File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp 19:26:24, December 17, 2005 Line: 3922 ERROR: Interface AP-OS: Error Flashing Subscriber Unit Error 0xE0020086 while sending address 0x8C18000. File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp 19:26:24, December 17, 2005 Line: 3922 ERROR: Phone[]: *Flash FAILED!!!* File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp --- and a 3'rd one --- 19:32:52, December 17, 2005 Line: 690 ERROR: A sharing violation occurred while accessing F:\Documents and Settings\matt\Desktop\OD\UNUSED1\780 monster\R52_G_0D[1].74.A2R_0D.C0.B1P_SE6822AD3B1_L001_S011_P004_SE6822AD3B1025_full\R52_G_0D.74.A2R_0D.C0.B1P_SE6822AD3B1_L001_S011_P004_SE6822AD3B1025_full.shx File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashFileIO.cpp 19:32:52, December 17, 2005 Line: 2113 ERROR: Flash File IO pointer is a NULL Pointer File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_Flash.cpp 19:33:05, December 17, 2005 Line: 139 ERROR: F:\Documents and
Re: a780 JTAG pinouts
hopefully this will help out somewhat with the questions. myself and foxor (a moderator on motorolafans.com) both tried to flash this particular phone. with pst it flashes with errors, some actual images might be worth a thousand words so here are some url's to images sorry for quality issues http://www.alternativemicrosystems.com/a780/initialphone.jpg http://www.alternativemicrosystems.com/a780/phoneflashing.jpg http://www.alternativemicrosystems.com/a780/pst1.jpg http://www.alternativemicrosystems.com/a780/pst2.jpg http://www.alternativemicrosystems.com/a780/pst3.jpg http://www.alternativemicrosystems.com/a780/pst4.jpg http://www.alternativemicrosystems.com/a780/pst5.jpg anyway i hope this helps out. if anyone wants me to try something or i've missed something let me know and i'll attempt it. thanks for the help guys
Re: a780 JTAG pinouts
2007/5/15, Matt Wall [EMAIL PROTECTED]: http://www.alternativemicrosystems.com/a780/initialphone.jpgThis one says that your phone is not bricked. http://www.alternativemicrosystems.com/a780/phoneflashing.jpg I never flashed BP on my phone but i think that this one says that you have communication problems AP - BP. http://www.alternativemicrosystems.com/a780/pst1.jpg http://www.alternativemicrosystems.com/a780/pst2.jpg http://www.alternativemicrosystems.com/a780/pst3.jpg http://www.alternativemicrosystems.com/a780/pst4.jpg http://www.alternativemicrosystems.com/a780/pst5.jpg Cant comment these, i never used PST. anyway i hope this helps out. if anyone wants me to try something or i've missed something let me know and i'll attempt it. I would guess that you have something phisicaly wrong with BP or with BP-AP usb lines. Dion has much more knowledge on this subject than me. Maybe he can tell you whats happening. What caused this? Was a software update? Or no apparent reason? -- EOF Daniel Ribeiro
Re: a780 JTAG pinouts
On Mon, May 14, 2007 at 09:04:21PM -0400, Matt Wall wrote: hopefully this will help out somewhat with the questions. myself and foxor (a moderator on motorolafans.com) both tried to flash this particular phone. with pst it flashes with errors, some actual images might be worth a thousand words so here are some url's to images sorry for quality issues http://www.alternativemicrosystems.com/a780/phoneflashing.jpg This is incorrect. Looks like really it's AP-BP communications problem. I think that this is some hardware problem. On each startup in flash mode, AP forces BP to start in flash mode too. After this AP asks BP about it's firmware status. On e680, if BP's bootloader is incorrect (or it's signature is incorrect), AP will detect it and turn on joystick light. But there will be no such messages about enum failing. Also it will be interesting if you will upload bootloader CG a020 with boot_usb or with ezxflash and look to lsusb -v messages after this. So maybe you should ask yourself: What happens with this phone? How you damage it? -- WBR, Dmitry signature.asc Description: Digital signature
