Re: [OpenIndiana-discuss] Successfull reboot of 2021.04-rc1 on Z840 w/ K5000 :-)
On 04/23/21 09:42 PM, Reginald Beardsley via openindiana-discuss wrote: It *appears* to be connected with selecting options 5, 6 & 7 before booting to multi-user. I'll investigate further after it's been running a while. I'm supposed have 64 GB of DRAM arrive today. I'm purely guessing, but I suspect that the "Reconfigure" option is what made it work. This install was to a 3 disk RAIDZ1, so I have to redo the install for a 4 disk RAIDZ2. I'll test my "Reconfigure" hypothesis when I do that. There may be other wrinkles in the BIOS settings. I cannot find BIOS documentation and this is my first encounter with a UEFI BIOS. The behavior changed significantly when I updated the BIOS. I'm hoping that applied a Spectre microcode patch. Reg ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss Hello! 2 hints: To persistently enable the "reconfigure", create a file in the installed OI called @/boot/loader.conf.local@ and put @boot-args="-r"@ in there. I have this because i like changing disks and whatever attached peripherals. As you will know a "devfsadm -C -c disk" will remove curently unused device names, so your inserted USB device *may* get a C1... name after next boot... You may like to persistently disable the graphical console, then create a file in the installed OI called @/boot/config@ and put @-t@ in there. This is working for me in BIOS boot mode, BUT i don't know if this has an effect in UEFI boot mode.. Stephan ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] Successfull reboot of 2021.04-rc1 on Z840 w/ K5000 :-)
> On 23. Apr 2021, at 23:20, Stephan Althaus > wrote: > > On 04/23/21 09:42 PM, Reginald Beardsley via openindiana-discuss wrote: >> It *appears* to be connected with selecting options 5, 6 & 7 before booting >> to multi-user. I'll investigate further after it's been running a while. >> I'm supposed have 64 GB of DRAM arrive today. >> >> I'm purely guessing, but I suspect that the "Reconfigure" option is what >> made it work. >> >> This install was to a 3 disk RAIDZ1, so I have to redo the install for a 4 >> disk RAIDZ2. I'll test my "Reconfigure" hypothesis when I do that. >> >> There may be other wrinkles in the BIOS settings. I cannot find BIOS >> documentation and this is my first encounter with a UEFI BIOS. The behavior >> changed significantly when I updated the BIOS. I'm hoping that applied a >> Spectre microcode patch. >> >> Reg >> >> ___ >> openindiana-discuss mailing list >> openindiana-discuss@openindiana.org >> https://openindiana.org/mailman/listinfo/openindiana-discuss > > Hello! > > 2 hints: > > To persistently enable the "reconfigure", create a file in the installed OI > called @/boot/loader.conf.local@ and put @boot-args="-r"@ in there. > I have this because i like changing disks and whatever attached peripherals. > As you will know a "devfsadm -C -c disk" will remove curently unused device > names, so your inserted USB device *may* get a C1... name after next boot... > > You may like to persistently disable the graphical console, then create a > file in the installed OI called @/boot/config@ and put @-t@ in there. > This is working for me in BIOS boot mode, BUT i don't know if this has an > effect in UEFI boot mode.. > > Stephan It does not. Because there is no text mode in UEFI. rgds, toomas ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] Successfull reboot of 2021.04-rc1 on Z840 w/ K5000 :-)
On Fri, Apr 23, 2021 at 2:43 PM Reginald Beardsley via openindiana-discuss < openindiana-discuss@openindiana.org> wrote: > It *appears* to be connected with selecting options 5, 6 & 7 before > booting to multi-user. I do believe this was in 1 of the very 1st replies I made to you when you 1st posted on this list ... it was either in the body or the link I posted. That has always been the key to getting an OI installation to boot for the 1st time on this end. Glad you got it working; I just feel like you could have a lot sooner ;) I'll investigate further after it's been running a while. I'm supposed > have 64 GB of DRAM arrive today. > > I'm purely guessing, but I suspect that the "Reconfigure" option is what > made it work. > > This install was to a 3 disk RAIDZ1, so I have to redo the install for a 4 > disk RAIDZ2. I'll test my "Reconfigure" hypothesis when I do that. > > There may be other wrinkles in the BIOS settings. I cannot find BIOS > documentation and this is my first encounter with a UEFI BIOS. The > behavior changed significantly when I updated the BIOS. I'm hoping that > applied a Spectre microcode patch. > > Reg > > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss > ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] Successfull reboot of 2021.04-rc1 on Z840 w/ K5000 :-)
I'm not doing a "devfsadm -C -c disks" when I'm swapping USB drives around, but I did do that recently and baffled myself for a few minutes and made some disks disappear before I laughed and fixed it. I have a Z400 just for swapping disks around and testing stuff. It's a great use for old drives. I normally expect a new system configuration to take me 20-30 hours before I'm happy with it. After ~50 hours to get to the starting line I'm a bit beat. But at least I finally got there. I've asserted that I never lost a battle with a computer and that includes being made an admin in grad school for a MicroVAX II in a BA123 worldbox with no training and no formal support except for the HW and *very* little prior computer experience. I was feeling rather grim about the prospect of giving up and sending the Z840 back. Reg On Friday, April 23, 2021, 03:21:01 PM CDT, Stephan Althaus wrote: On 04/23/21 09:42 PM, Reginald Beardsley via openindiana-discuss wrote: > It *appears* to be connected with selecting options 5, 6 & 7 before booting > to multi-user. I'll investigate further after it's been running a while. > I'm supposed have 64 GB of DRAM arrive today. > > I'm purely guessing, but I suspect that the "Reconfigure" option is what made > it work. > > This install was to a 3 disk RAIDZ1, so I have to redo the install for a 4 > disk RAIDZ2. I'll test my "Reconfigure" hypothesis when I do that. > > There may be other wrinkles in the BIOS settings. I cannot find BIOS > documentation and this is my first encounter with a UEFI BIOS. The behavior > changed significantly when I updated the BIOS. I'm hoping that applied a > Spectre microcode patch. > > Reg > > ___ > openindiana-discuss mailing list > openindiana-discuss@openindiana.org > https://openindiana.org/mailman/listinfo/openindiana-discuss Hello! 2 hints: To persistently enable the "reconfigure", create a file in the installed OI called @/boot/loader.conf.local@ and put @boot-args="-r"@ in there. I have this because i like changing disks and whatever attached peripherals. As you will know a "devfsadm -C -c disk" will remove curently unused device names, so your inserted USB device *may* get a C1... name after next boot... You may like to persistently disable the graphical console, then create a file in the installed OI called @/boot/config@ and put @-t@ in there. This is working for me in BIOS boot mode, BUT i don't know if this has an effect in UEFI boot mode.. Stephan ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
Re: [OpenIndiana-discuss] Successfull reboot of 2021.04-rc1 on Z840 w/ K5000 :-)
I never had a problem before the Z840. My first Z400 never changed until the MB died except for converting to a RAIDZ1 array and a bump from 3x 1 TB to 3x 2 TB. I bought the other 3 about 5 years ago. The installs I've done on my test Z400 have always gone smoothly, but the BIOS does some "magic" so you have to press F1 to continue the boot any time you change a disk. That's probably why I never saw it before. This BIOS doesn't do that. And I had loads of fun with it :-( Sorting this cost me a lot, but at least it's a simple change to the install process to fix. I think the issue is the graphics card as everything looks fine in single user mode. It's when it attempts to start X that it crashed. The Solaris and Linux install tests showed how much superior Hipster is. I'm going to test rc1 on both the Z400 and Z840 to verify what change is needed in the installed image to prevent this happening. It's very little effort for those who are set up to do test installs to provide test feedback to the developers. I'd like to see a regular program for doing that. Courtesy of assistance from Andy Fiddaman on the illumos-dev list, I now have a disk with a 2020.10 based userland development environment. There's not a lot to it, so an oi-dev pkg should take care of making it easier for users to fix bugs they encounter. "pkg install oi-dev", locate the problem program and go to work. Once I recover a bit from the drubbing the Z840 gave me, I'm going to fix the SEGVs in format(1m). Have Fun! Reg On Friday, April 23, 2021, 03:37:30 PM CDT, Judah Richardson wrote: On Fri, Apr 23, 2021 at 2:43 PM Reginald Beardsley via openindiana-discuss wrote: It *appears* to be connected with selecting options 5, 6 & 7 before booting to multi-user. I do believe this was in 1 of the very 1st replies I made to you when you 1st posted on this list ... it was either in the body or the link I posted. That has always been the key to getting an OI installation to boot for the 1st time on this end. Glad you got it working; I just feel like you could have a lot sooner ;) I'll investigate further after it's been running a while. I'm supposed have 64 GB of DRAM arrive today. I'm purely guessing, but I suspect that the "Reconfigure" option is what made it work. This install was to a 3 disk RAIDZ1, so I have to redo the install for a 4 disk RAIDZ2. I'll test my "Reconfigure" hypothesis when I do that. There may be other wrinkles in the BIOS settings. I cannot find BIOS documentation and this is my first encounter with a UEFI BIOS. The behavior changed significantly when I updated the BIOS. I'm hoping that applied a Spectre microcode patch. Reg ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss ___ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss