Re: [osol-discuss] Any way to tell temperature of hard drives
To help you out, check out this site: http://www.blastwave.org/howto.html -- This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
[...] Dennis wrote: You can find SMARTmontools at : i386: http://blastwave.network.com/csw/unstable/i386/5.11/ martmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg .gz sparc : http://blastwave.network.com/csw/unstable/sparc/5.11/ martmontools-5.36,REV=2006.09.11-SunOS5.8-sparc-CSW.pk g.gz The latest rev is smartmontools-5.38 which I have sitting in the Blastwave farm. It will be out sometime this week or next week most likely. How to run it : [...] snipped lots of really good details thanks You gave really good walkthru but I must be missing a step early on. I'm having trouble with getting the stuff at /opt/csw. I thought pkgadd would be able to handle smartmon from blastwave but I must be getting it wrong: After gunzip I moved it to /var/spool/pkg pkgadd smartmontools-5.36\,REV\=2006.09.11-SunOS5.8-i386-CSW pkg pkgadd: ERROR: no packages were found in /var/spool/pkg I thought maybe I need to shorten the name: pkgadd smartmontools pkgadd: ERROR: no packages were found in /var/spool/pkg I tried several other variations to including the direct path: cd /var/spool/pkg pkgadd ./smartmontools-5.36\,REV\=2006.09.11-SunOS5.8-i386-C W.pkg pkgadd: ERROR: no packages were found in /var/spool/pkg Is this the wrong way to go at it altogether, or just bad syntax? ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org Unpack the file to somewhere. Then try pkgadd -d /path/to/smartmontoolsfile -- This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd
Anon Y Mous system5u...@yahoo.com writes: Sorry, that is the wrong type of disk. Perhaps the latest version will help. Let me get back to you on that. Dennis I heard rumors that SMART tools don't work well with most SATA disks / SATA controllers in Solaris. Anybody know if this is true? I've been wanting to experiment with building different versions of the tools from source but just haven't had the time Just for your information... I have 4 IDE disks and 2 SATA. I tried the command on them all with the same result. ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
[...] Dennis wrote: You can find SMARTmontools at : i386: http://blastwave.network.com/csw/unstable/i386/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg.gz sparc : http://blastwave.network.com/csw/unstable/sparc/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-sparc-CSW.pkg.gz The latest rev is smartmontools-5.38 which I have sitting in the Blastwave farm. It will be out sometime this week or next week most likely. How to run it : [...] snipped lots of really good details thanks You gave really good walkthru but I must be missing a step early on. I'm having trouble with getting the stuff at /opt/csw. I thought pkgadd would be able to handle smartmon from blastwave but I must be getting it wrong: After gunzip I moved it to /var/spool/pkg pkgadd smartmontools-5.36\,REV\=2006.09.11-SunOS5.8-i386-CSW.pkg pkgadd: ERROR: no packages were found in /var/spool/pkg I thought maybe I need to shorten the name: pkgadd smartmontools pkgadd: ERROR: no packages were found in /var/spool/pkg I tried several other variations to including the direct path: cd /var/spool/pkg pkgadd ./smartmontools-5.36\,REV\=2006.09.11-SunOS5.8-i386-CSW.pkg pkgadd: ERROR: no packages were found in /var/spool/pkg Is this the wrong way to go at it altogether, or just bad syntax? ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
[...] Dennis wrote: You can find SMARTmontools at : i386: http://blastwave.network.com/csw/unstable/i386/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg.gz sparc : http://blastwave.network.com/csw/unstable/sparc/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-sparc-CSW.pkg.gz The latest rev is smartmontools-5.38 which I have sitting in the Blastwave farm. It will be out sometime this week or next week most likely. How to run it : [...] snipped lots of really good details thanks You gave really good walkthru but I must be missing a step early on. I'm having trouble with getting the stuff at /opt/csw. I thought pkgadd would be able to handle smartmon from blastwave but I must be getting it wrong: yep, you are. Easy to fix. After gunzip I moved it to /var/spool/pkg don't do that. You can put the package file anywhere, in /tmp is fine. pkgadd smartmontools-5.36\,REV\=2006.09.11-SunOS5.8-i386-CSW.pkg close but no cigar. Try : pkgadd -G -d ./smartmontools-5.36\,REV\=2006.09.11-SunOS5.8-i386-CSW.pkg If you are NOT on Solaris 10 or higher then do NOT use the -G Is this the wrong way to go at it altogether, or just bad syntax? bad syntax, that's all. -- Dennis Clarke ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
My setup: Athlon64 2.2ghz 3400+ - AK86-L Aopen mobo (Topped out at 3gb ram) 4 500gb IDE drives on IDE controllers 2 750gb SATA drives on PCI sata controller (adaptec 1205sa [Sil3112a chip]) Currently: osol-2008.11 build 110 = * = * = * = [...] Sorry to keep bugging you, but it appears I'm still getting something wrong. Neither of these produce usable results: format -e [...] 4. c5d0 WDC WD75- WD-WMAU686-0001-698.63GB /p...@0,0/pci-...@8/i...@0/c...@0,0 [...] This is a very new disk. I'd be surprised if it really didn't have S.M.A.R.T technology. = * = * = * = # /opt/csw/sbin/smartctl -a /dev/rdsk/c5d0 or # /opt/csw/sbin/smartctl -a /dev/rdsk/c5d0s0 /opt/csw/sbin/smartctl -a /dev/rdsk/c5d0s0 smartctl version 5.36 [i386-pc-solaris2.8] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ ### ATA command routine ata_command_interface() NOT IMPLEMENTED under Solaris. Please contact smartmontools-supp...@lists.sourceforge.net if you want to help in porting smartmontools to Solaris. ### Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. = * = * = * = ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
Harry Putnam rea...@newsguy.com writes: /opt/csw/sbin/smartctl -a /dev/rdsk/c5d0s0 smartctl version 5.36 [i386-pc-solaris2.8] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Gackkk... sorry I didn't understand the bit about -T A mandatory SMART command failed: exiting. To continue, \ add one or more '-T permissive' options. ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
My setup: Athlon64 2.2ghz 3400+ - AK86-L Aopen mobo (Topped out at 3gb ram) 4 500gb IDE drives on IDE controllers 2 750gb SATA drives on PCI sata controller (adaptec 1205sa [Sil3112a chip]) Currently: osol-2008.11 build 110 = * = * = * = [...] Sorry to keep bugging you, but it appears I'm still getting something wrong. Neither of these produce usable results: format -e [...] 4. c5d0 WDC WD75- WD-WMAU686-0001-698.63GB /p...@0,0/pci-...@8/i...@0/c...@0,0 [...] This is a very new disk. I'd be surprised if it really didn't have S.M.A.R.T technology. Sorry, that is the wrong type of disk. Perhaps the latest version will help. Let me get back to you on that. Dennis ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd
Sorry, that is the wrong type of disk. Perhaps the latest version will help. Let me get back to you on that. Dennis I heard rumors that SMART tools don't work well with most SATA disks / SATA controllers in Solaris. Anybody know if this is true? I've been wanting to experiment with building different versions of the tools from source but just haven't had the time The Thumper servers (x4540 ?) have that special SMART tools SysV package (SUNWhd ?) that comes on the installation CD / DVD that Ben Rockwood was blogging about, and if I remember correctly they use SATA drives, so maybe that SMART package for SATA SMART support in Solaris only works with the kind of SATA controller chipset used in the Thumper? I think the Thumper has some kind of a Marvell chipset or something, right? I've never had the $$$ to buy my own Thumper and nobody I know who owns one will let me take it offline and play around with it so I honestly wouldn't know, but better SMART integration in Solaris x86 should probably be our #1 priority in OpenSolaris IMO along with NTFS and ext3 read/write support and multimedia support. -- This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives
Another easy way to get SMART type data is the SUNWhd package used on the Thumper servers, but I think it only works with certain kinds of Marvell chip sets: http://opensolaris.org/jive/thread.jspa?messageID=312887 -- This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives
The best part of all is that I've heard rumors that you can even mount the CD-ROM drive from your laptop at home on the remote server and re-install the operating system remotely through the ILOM card if your internet connection is fast enough. Yep; and I also use it *upgrade* the BIOS and the firmware in certain add-on cards; you need to boot ms-dos from a CD image and it's nice to be able to do so while you don't have to walk to the lab. Casper ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives
Here's also how to compile the smartmon tools from the original source code: http://cafenate.wordpress.com/2009/02/22/setting-up-smartmontools-on-opensolaris/ This info might come in handy some day if you ever want to become a developer / programmer / maintainer for smart tools on solaris and want to help fix bugs and add new features and push changes upstream into the smartmon tools source tree. -- This message posted from opensolaris.org ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
Dennis Clarke dcla...@blastwave.org writes: Setup: amd Athlon64 2.2Ghz +3400 - Aopen Ak-86 mobo Can anyone tell me if there is some application that can tell the temperatures of my harddrives? Do we have anthing like lm_sensors in the linux world? Anyway at all short of booting to BIOS? SMART firmware based disks can be queried with smartctl. You can find SMARTmontools at : i386: http://blastwave.network.com/csw/unstable/i386/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg.gz Thanks. I haven't installed this yet but wondered if there is anything that monitors cpu temp available for opensolaris? ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
On Fri, Mar 27, 2009 at 2:03 PM, Harry Putnam rea...@newsguy.com wrote: Dennis Clarke dcla...@blastwave.org [...] SMART firmware based disks can be queried with smartctl. You can find SMARTmontools at : i386: http://blastwave.network.com/csw/unstable/i386/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg.gz Thanks. I haven't installed this yet but wondered if there is anything that monitors cpu temp available for opensolaris? On SPARC plus on older versions of Solaris /usr/sbin/prtdiag used to show exact CPU-fan speed and -temperature in degrees Celsius (at least on Blade1000/2000/SF280R/N20). Newer versions only show ok. I'm not sure if this is a new feature of the prtdiag command, or rather if it is related to the newer OBP version to which I upgraded my boxes in January 2005. A look at the prtdiag code would reveal this. On x86 I'm not sure if /usr/sbin/smbios could be enhanced to query temperature sensors from the BIOS, maybe the is an open-src tools for this. Maybe Dennis Clarke has the right answer on blastwave.org (?). %martin ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
[osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
Setup: amd Athlon64 2.2Ghz +3400 - Aopen Ak-86 mobo Can anyone tell me if there is some application that can tell the temperatures of my harddrives? Do we have anthing like lm_sensors in the linux world? Anyway at all short of booting to BIOS? ___ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
Re: [osol-discuss] Any way to tell temperature of hard drives [amd athlon hrdwr]
Setup: amd Athlon64 2.2Ghz +3400 - Aopen Ak-86 mobo Can anyone tell me if there is some application that can tell the temperatures of my harddrives? Do we have anthing like lm_sensors in the linux world? Anyway at all short of booting to BIOS? SMART firmware based disks can be queried with smartctl. You can find SMARTmontools at : i386: http://blastwave.network.com/csw/unstable/i386/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg.gz sparc : http://blastwave.network.com/csw/unstable/sparc/5.11/ smartmontools-5.36,REV=2006.09.11-SunOS5.8-sparc-CSW.pkg.gz The latest rev is smartmontools-5.38 which I have sitting in the Blastwave farm. It will be out sometime this week or next week most likely. How to run it : # /opt/csw/bin/pkgutil --install smartmontools MD5 for CSWsmartmontools matched. Installing CSWsmartmontools Processing package instance CSWsmartmontools from /var/opt/csw/pkgutil/packages/smartmontools-5.36,REV=2006.09.11-SunOS5.8-i386-CSW.pkg smartmontools - S.M.A.R.T. utility toolset (i386) 5.36,REV=2006.09.11 ## Processing package information. ## Processing system information. 11 package pathnames are already properly installed. ## Verifying package dependencies. ## Verifying disk space requirements. ## Checking for conflicts with packages already installed. ## Checking for setuid/setgid programs. Installing smartmontools - S.M.A.R.T. utility toolset as CSWsmartmontools ## Installing part 1 of 1. /etc/init.d/smartd /etc/rc0.d/K05smartd symbolic link /etc/rc1.d/K05smartd symbolic link /etc/rc2.d/K05smartd symbolic link /etc/rc3.d/S95smartd symbolic link /etc/rcS.d/K05smartd symbolic link /opt/csw/etc/smartd.conf.CSW /opt/csw/sbin/smartctl /opt/csw/sbin/smartd /opt/csw/share/doc/smartmontools/AUTHORS /opt/csw/share/doc/smartmontools/CHANGELOG /opt/csw/share/doc/smartmontools/COPYING /opt/csw/share/doc/smartmontools/INSTALL /opt/csw/share/doc/smartmontools/NEWS /opt/csw/share/doc/smartmontools/README /opt/csw/share/doc/smartmontools/TODO /opt/csw/share/doc/smartmontools/WARNINGS /opt/csw/share/doc/smartmontools/examplescripts/Example1 /opt/csw/share/doc/smartmontools/examplescripts/Example2 /opt/csw/share/doc/smartmontools/examplescripts/Example3 /opt/csw/share/doc/smartmontools/examplescripts/README /opt/csw/share/doc/smartmontools/smartd.conf /opt/csw/share/man/man1m/smartctl.1m /opt/csw/share/man/man1m/smartd.1m /opt/csw/share/man/man4/smartd.conf.4 [ verifying class none ] Installation of CSWsmartmontools was successful. # # ldd /opt/csw/sbin/smartctl libnsl.so.1 = /usr/lib/libnsl.so.1 libc.so.1 = /usr/lib/libc.so.1 libdl.so.1 =/usr/lib/libdl.so.1 libmp.so.2 =/usr/lib/libmp.so.2 # # format -e Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c1t0d0 DEFAULT cyl 1103 alt 2 hd 255 sec 63 /p...@0,0/pci9004,7...@8/s...@0,0 1. c2t0d0 SEAGATE-ST39102LW-8320 cyl 6921 alt 2 hd 12 sec 214 /p...@0,0/pci1011,2...@11/pci1000,1...@4/s...@0,0 2. c2t2d0 DEFAULT cyl 8921 alt 2 hd 255 sec 63 /p...@0,0/pci1011,2...@11/pci1000,1...@4/s...@2,0 3. c3t1d0 DEFAULT cyl 4424 alt 2 hd 255 sec 63 /p...@0,0/pci9004,7...@12/s...@1,0 Specify disk (enter its number): ^D So pick a disk. # /opt/csw/sbin/smartctl -a /dev/rdsk/c3t1d0s0 smartctl version 5.36 [i386-pc-solaris2.8] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: SEAGATE ST336704LSUN36G Version: 032C Serial number: 3CD0T8N67120H9DU Device type: disk Local Time is: Thu Mar 26 11:12:10 2009 EDT Device supports SMART and is Enabled Temperature Warning Enabled SMART Health Status: OK Current Drive Temperature: 42 C Drive Trip Temperature:65 C Manufactured in week 46 of year 2000 Current start stop count: 42 times Recommended maximum start stop count: 1 times Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1196304931 Blocks received from initiator = 697150337 Blocks read from cache and sent to initiator = 216591399 Number of read and write commands whose size = segment size = 7837521 Number of read and write commands whose size segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 11032.38 number of minutes until next internal SMART test = 42 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read:8160 0 816816723.602 0 write: 00 0 0 0367.204 0 Non-medium error count:1 [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] SMART Self-test log Num Test