Re: [Openstack] Is the Quantum a network bottleneck

[Gary Kotton]

On 01/22/2013 07:02 PM, Jian Wen wrote:

On 2013?01?22? 10:56, Balamurugan V G wrote:

Hi,

In an Openstack deployment using Quantum, the compute nodes access 
the public/external network via the network node (as per the diagram 
http://docs.openstack.org/trunk/openstack-network/admin/content/connectivity.html).


So if I have a hundred compute nodes each running hundred instances, 
wouldn't the link to the network node choke? Also wouldnt the network 
node's resources be a bottleneck?


Regards,
Balu


___
Mailing list:https://launchpad.net/~openstack
Post to :openstack@lists.launchpad.net
Unsubscribe :https://launchpad.net/~openstack
More help   :https://help.launchpad.net/ListHelp

 Quantum Multi-host DHCP and L3
https://blueprints.launchpad.net/quantum/+spec/quantum-multihost


Yes. At the moment the network node is the bottleneck. There is a patch 
upstream in review that will solve this issue:

https://review.openstack.org/#/c/18216/

Hopefully this will be ready in the Grizzly cycle.

In addition to this it also provides HA for the L3 and DHCP agents.
Thanks
Gary



--
Jian Wen


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] [COSUG] how the nova-api wsgi receive request?

[longeek]

Hi friends,
I have got the idea about this by komobo and devstack.
komobo is powerful that can debug remote python,perl,php...etc

if you have the same question about it, you can email to me, I will help
you.

Good Luck.


Lawrency Meng
mail: mengql112...@gmail.com


于 01/22/2013 07:08 PM, longeek 写道:
 Hi friends,
 openstack wsgi use eventlet to spawn one process which listening the
 request.
 I have known how the wsgi service running,
 but how the wsgi receive request and how to follow it by debug?

 any good ideas?

 Tks,
 Best Regards,

 Lawrency Meng
 mail: mengql112...@gmail.com



-- 

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] [COSUG:1629] Re: [COSUG] how the nova-api wsgi receive request?

[Ian Zhang]

+1

On 1/23/13 4:30 PM, longeek mengql112...@gmail.com wrote:


Hi friends,
I have got the idea about this by komobo and devstack.
komobo is powerful that can debug remote python,perl,php...etc

if you have the same question about it, you can email to me, I will help
you.

Good Luck.


Lawrency Meng
mail: mengql112...@gmail.com


于 01/22/2013 07:08 PM, longeek 写道:
 Hi friends,
 openstack wsgi use eventlet to spawn one process which listening the
 request.
 I have known how the wsgi service running,
 but how the wsgi receive request and how to follow it by debug?

 any good ideas?

 Tks,
 Best Regards,

 Lawrency Meng
 mail: mengql112...@gmail.com



-- 

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

-- 
-- 

China OpenStack User Group (COSUG) - http://www.openstack.org.cn

To join the mailing list - visit this group at:
http://groups.google.com/group/china-openstack-user-group

General user online chat group:QQ ID: 11315737
Developer user online chat group:  QQ ID: 202265873
User training online chat group:   QQ ID: 257479608
Deployment training online chat group: QQ ID: 145923072





___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Is the Quantum a network bottleneck

[Staicu Gabriel]

These are great news Gary.
Do you happen to know if the patch will be also available for folsom?

Thanks,
Gabriel




 From: Gary Kotton gkot...@redhat.com
To: jian@canonical.com 
Cc: openstack@lists.launchpad.net 
Sent: Wednesday, January 23, 2013 10:08 AM
Subject: Re: [Openstack] Is the Quantum a network bottleneck
 

On 01/22/2013 07:02 PM, Jian Wen wrote: 
On 2013年01月22日 10:56, Balamurugan V G wrote:

Hi,

In an Openstack deployment using Quantum, the compute nodes
access the public/external network via the network node (as per
the diagram 
http://docs.openstack.org/trunk/openstack-network/admin/content/connectivity.html).

So if I have a hundred compute nodes each running hundred
instances, wouldn't the link to the network node choke? Also
wouldnt the network node's resources be a bottleneck?

Regards,
Balu



___
Mailing list: https://launchpad.net/~openstack Post to : 
openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack 
More help   : https://help.launchpad.net/ListHelp 
 Quantum Multi-host DHCP and L3 
https://blueprints.launchpad.net/quantum/+spec/quantum-multihost

Yes. At the moment the network node is the bottleneck. There is a
patch upstream in review that will solve this issue:
https://review.openstack.org/#/c/18216/

Hopefully this will be ready in the Grizzly cycle.

In addition to this it also provides HA for the L3 and DHCP agents.
Thanks
Gary




-- 
Jian Wen 


___
Mailing list: https://launchpad.net/~openstack Post to : 
openstack@lists.launchpad.net Unsubscribe : https://launchpad.net/~openstack 
More help   : https://help.launchpad.net/ListHelp 

___
Mailing list: https://launchpad.net/~openstack
Post to     : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Unable to create a vm

[Alexandre De Carvalho]

Hi Razique,

I ran this command :

alex@alex-X9SCD:~$ egrep '^flags.*(vmx|svm)' /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid fsgsbase smep erms
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid fsgsbase smep erms
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid fsgsbase smep erms
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
flexpriority ept vpid fsgsbase smep erms
alex@alex-X9SCD:~$




Alex


2013/1/22 Razique Mahroua razique.mahr...@gmail.com

 Hi Alexandre,
 can you run the following command?

 egrep '^flags.*(vmx|svm)' /proc/cpuinfo


 thanks !

 *Razique Mahroua** - **Nuage  Co*
 razique.mahr...@gmail.com
 Tel : +33 9 72 37 94 15


 Le 22 janv. 2013 à 22:35, Alexandre De Carvalho 
 alexandre7.decarva...@gmail.com a écrit :

 Hi,

 I have this problem when i want to create a vm.

 Could not access KVM kernel module: Permission denied failed to initialize
 KVM: Permission denied
 No accelerator found!

 Can you help me, please ?

 best regards,
 Alexandre
 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp





-- 
Cordialement,
Alexandre DE CARVALHO
NUAGECO-LOGO_logo_complet.gif___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Multinic issue (essex)

[Jesús Moreno]

Hi,

I'm trying to use multinic to create a scenario with two instances: Client
(with one network interface) and Router (with two interfaces):

Client(10.0.14.5)  (10.0.14.9)Router(10.0.2.9)

I have modified the gateway in Client routing table, setting Router as the
new gateway, and activated ip_forward in Router. However, when I ping
10.0.2.9 from Client I get no reply. Capturing the traffic with tcpdump I
have checked that  Router gets echo requests packets and that Router sends
echo replys, but then they get lost somewhere, as I have captured the
traffic in the computation nodes bridges and the echo reply packets don't
appear. I guess that it could be a problem related with Vlans. Any ideas?
Any help would be greatly appreciated.

Regards,
J. Moreno.
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Possible to have local storage to the node and shared at the same time?

[zebra z zebra]

Hi.

I'm experimenting with some odd fundamental ideas about storage currently
for my deployment.

Earlier on this list, we were discussing a way to pin or segregate certain
instances to certain node types. There appears to be a quite neat way to do
this using a filter-scheduler configuration and a prefix on the nodes
themselves.

If we take it a step further, I'd like to know if there is a way we can run
instances that use local-to-the-node disk storage for boot and shared
storage for the vm stores at the same time. I know it's an odd question that
might be missing some logic somewhere.

What I'm trying to achieve is an availability requirement in different
modalities and different scalability requirements with the same
infrastructure, in terms of the storage used.

Thanks.

-z


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Openstack with ESXi - NetworkNotFoundForBridge: Network could not be found for bridge

[Balamurugan V G]

I see that there is no value being passed for 'bridge'. The snippet from
the nova-compute log just before the Execption is below:


2013-01-23 02:33:37 DEBUG nova.compute.manager
[req-9c972e4e-3f8b-4cc3-b151-963b71f0b9a2 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] [instance:
ad7a8f84-f303-4733-9822-2e81b7cbc407] Instance network_info:
|[VIF({'network': Network({*'bridge': '',* 'subnets': [Subnet({'ips':
[FixedIP({'meta': {}, 'version': 4, 'type': 'fixed', 'floating_ips': [],
'address': u'50.50.1.4'})], 'version': 4, 'meta': {'dhcp_server':
u'50.50.1.2'}, 'dns': [], 'routes': [], 'cidr': u'50.50.1.0/24', 'gateway':
IP({'meta': {}, 'version': 4, 'type': 'gateway', 'address':
u'50.50.1.1'})})], 'meta': {'injected': False, 'tenant_id':
u'b439758af3814f739fe7ab09b98a0120'}, 'id':
u'dcef8ce4-dff0-4a54-9112-9695c28c02d5', 'label': u'net1'}), 'meta': {},
'id': u'0c68ea85-b289-486e-bdaf-999bc35256a9', 'address':
u'fa:16:3e:45:e5:6b'})]| from (pid=13103) _allocate_network
/usr/lib/python2.7/dist-packages/nova/compute/manager.py:715

What could be going wrong here?

Regards,
Balu

On Wed, Jan 23, 2013 at 1:08 PM, Balamurugan V G balamuruga...@gmail.comwrote:

 Hi,

 I have a two node OpenStack Folsom Setup. One node runs all services with
 KVM. The other nodes is a Compute Node for ESXi 5.1. I have set the
 availabality_zones for each of this so that I can schedule instances as per
 my need. I am able to operate the instances on the KVM just fine. But when
 I launch an instance for ESXi, it goes to ERROR state with the error
 'NetworkNotFoundForBridge: Network could not be found for bridge'.

 After the vanilla Folsom installation, I was getting an AttribueError
 which got fixed after applying the patch at
 https://bugs.launchpad.net/nova/+bug/1063885

 But then after that, I am seeing this error.

 root@openstack-kvm:~# nova show 8110c50c-ed26-48dd-886b-71b44ee382dd

 +-+-+
 | Property| Value

   |

 +-+-+
 | OS-DCF:diskConfig   | MANUAL

  |
 | OS-EXT-SRV-ATTR:host| openstack-esxi

  |
 | OS-EXT-SRV-ATTR:hypervisor_hostname | None

  |
 | OS-EXT-SRV-ATTR:instance_name   | instance-0016

   |
 | OS-EXT-STS:power_state  | 0

   |
 | OS-EXT-STS:task_state   | None

  |
 | OS-EXT-STS:vm_state | error

   |
 | accessIPv4  |

   |
 | accessIPv6  |

   |
 | config_drive|

   |
 | created | 2013-01-23T07:13:11Z

  |
 | fault   | {u'message':
 u'NetworkNotFoundForBridge', u'code': 404, u'details': u'Network could not
 be found for bridge ', u'created': u'2013-01-23T07:13:14Z'} |
 | flavor  | m1.tiny (6)

   |
 | hostId  |
 a9edbd6bb1136ff3bcf5225d1f6a34e0d18cc21eb9837acd67dec105
  |
 | id  |
 8110c50c-ed26-48dd-886b-71b44ee382dd
  |
 | image   | Ubuntu1204
 (4d70a998-a51e-4557-81fa-23747db12305)
   |
 | key_name| None

  |
 | metadata| {}

  |
 | name| VM2

   |
 | security_groups | [{u'name': u'default'}]

   |
 | status  | ERROR

   |
 | tenant_id   | b439758af3814f739fe7ab09b98a0120

  |
 | updated | 2013-01-23T07:13:14Z

  |
 | user_id | 9ac7dbe62fb349ce84927598a0f54d68

  |

 

[Openstack] Multinic issue (essex)

[Jesús Moreno]

Hi,

I'm trying to use multinic to create a scenario with two instances: Client
(with one network interface) and Router (with two interfaces):

Client(10.0.14.5)  (10.0.14.9)Router(10.0.2.9)

I have modified the gateway in Client routing table, setting Router as the
new gateway, and activated ip_forward in Router. However, when I ping
10.0.2.9 from Client I get no reply. Capturing the traffic with tcpdump I
have checked that  Router gets echo requests packets and that Router sends
echo replys, but then they get lost somewhere, as I have captured the
traffic in the computation nodes bridges and the echo reply packets don't
appear. I guess that it could be a problem related with Vlans. Any ideas?
Any help would be greatly appreciated.

Regards,
J. Moreno.
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Unable to create a vm

[Razique Mahroua]

Ok,now :sudo modprobe kvmsudo modprobe kvm-intelYou should be good I think
Razique Mahroua-Nuage  Corazique.mahr...@gmail.comTel: +33 9 72 37 94 15

Le 23 janv. 2013 à 10:34, Alexandre De Carvalho alexandre7.decarva...@gmail.com a écrit :Hi Razique,I ran this command :alex@alex-X9SCD:~$ egrep '^flags.*(vmx|svm)' /proc/cpuinfoflags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms
alex@alex-X9SCD:~$Alex2013/1/22 Razique Mahroua razique.mahr...@gmail.com
Hi Alexandre,can you run the following command?
egrep '^flags.*(vmx|svm)' /proc/cpuinfo
thanks !
Razique Mahroua-Nuage  Co
razique.mahr...@gmail.comTel: +33 9 72 37 94 15
NUAGECO-LOGO_logo_complet.gif

Le 22 janv. 2013 à 22:35, Alexandre De Carvalho alexandre7.decarva...@gmail.com a écrit :
Hi,
I have this problem when i want to create a vm.Could not access KVM kernel module: Permission denied failed to initialize

KVM: Permission deniedNo accelerator found!Can you help me, please ?best regards,Alexandre
___Mailing list: https://launchpad.net/~openstackPost to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstackMore help : https://help.launchpad.net/ListHelp
-- Cordialement,Alexandre DE CARVALHO

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Unable to create a vm

[Balamurugan V G]

Try this as well:

chown root:kvm /dev/kvm

-Balu

On Wed, Jan 23, 2013 at 4:51 PM, Razique Mahroua
razique.mahr...@gmail.comwrote:

 Ok,
 now :

 sudo modprobe kvm
 sudo modprobe kvm-intel


 You should be good I think

 *Razique Mahroua** - **Nuage  Co*
 razique.mahr...@gmail.com
 Tel : +33 9 72 37 94 15


 Le 23 janv. 2013 à 10:34, Alexandre De Carvalho 
 alexandre7.decarva...@gmail.com a écrit :

 Hi Razique,

 I ran this command :

 alex@alex-X9SCD:~$ egrep '^flags.*(vmx|svm)' /proc/cpuinfo
 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
 pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
 aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
 f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
 flexpriority ept vpid fsgsbase smep erms
 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
 pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
 aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
 f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
 flexpriority ept vpid fsgsbase smep erms
 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
 pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
 aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
 f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
 flexpriority ept vpid fsgsbase smep erms
 flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
 pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm
 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
 aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16
 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx
 f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi
 flexpriority ept vpid fsgsbase smep erms
 alex@alex-X9SCD:~$




 Alex


 2013/1/22 Razique Mahroua razique.mahr...@gmail.com

 Hi Alexandre,
 can you run the following command?

 egrep '^flags.*(vmx|svm)' /proc/cpuinfo


 thanks !

 *Razique Mahroua** - **Nuage  Co*
 razique.mahr...@gmail.com
 Tel : +33 9 72 37 94 15

 NUAGECO-LOGO_logo_complet.gif

 Le 22 janv. 2013 à 22:35, Alexandre De Carvalho 
 alexandre7.decarva...@gmail.com a écrit :

 Hi,

 I have this problem when i want to create a vm.

 Could not access KVM kernel module: Permission denied failed to
 initialize
 KVM: Permission denied
 No accelerator found!

 Can you help me, please ?

 best regards,
 Alexandre
 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp





 --
 Cordialement,
 Alexandre DE CARVALHO




 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Glance image upload Keystone error

[Trinath Somanchi]

Hi Stackers-

I have installed glance and Keystone and configured them.

But When I upload a test image with glance, I got this error in keystone
logs

(sqlalchemy.engine.base.Engine): 2013-01-23 17:04:57,904 INFO
('106298a47e5a4d129c7b8571e188c51e', 1)
(keystone.common.cms): 2013-01-23 17:04:57,990 ERROR Signing error: Error
opening signer certificate /etc/keystone/ssl/certs/signing_cert.pem
140702974211744:error:02001002:system library:fopen:No such file or
directory:bss_file.c:398:fopen('/etc/keystone/ssl/certs/signing_cert.pem','r')
140702974211744:error:20074002:BIO routines:FILE_CTRL:system
lib:bss_file.c:400:
unable to load certificate

(root): 2013-01-23 17:04:57,991 ERROR Command 'openssl' returned non-zero
exit status 3
Traceback (most recent call last):
  File
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/wsgi.py,
line 215, in __call__
result = method(context, **params)
  File
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/token/controllers.py,
line 118, in authenticate
config.CONF.signing.keyfile)
  File
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py,
line 140, in cms_sign_token
output = cms_sign_text(text, signing_cert_file_name,
signing_key_file_name)
  File
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py,
line 135, in cms_sign_text
raise subprocess.CalledProcessError(retcode, openssl)
CalledProcessError: Command 'openssl' returned non-zero exit status 3

Kindly help me resolve the issue

-- 
Regards,
--
Trinath Somanchi,
+91 9866 235 130
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Reinstating Trey Morris for Nova Core

[Sean Dague]

+1

On 01/22/2013 07:25 PM, Vishvananda Ishaya wrote:

+1

We mentioned previously that we would fast-track former core members back in.
I gess we can wait a couple of days to see if anyone objects and then add him 
back.

Vish
On Jan 22, 2013, at 3:38 PM, Matt Dietz matt.di...@rackspace.com wrote:


All,

I think Trey Morris has been doing really well on reviews again, so I'd
like to propose him to be reinstated for Nova core. Thoughts?

-Dietz



___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp



___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp




--
Sean Dague
IBM Linux Technology Center
email: sda...@linux.vnet.ibm.com
alt-email: slda...@us.ibm.com


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Reinstating Trey Morris for Nova Core

[Chris Behrens]

+1

On Jan 22, 2013, at 5:38 PM, Matt Dietz matt.di...@rackspace.com wrote:

 All,
 
I think Trey Morris has been doing really well on reviews again, so I'd
 like to propose him to be reinstated for Nova core. Thoughts?
 
 -Dietz
 
 
 
 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Windows instance licensing in OpenStack

[Balamurugan V G]

Hi,

I wonder how the Windows Licensing would work in OpenStack. Lets say I have
a Windows Image which I have already activated. Now if I launch N instances
of this image, what are the SO licensing implications? Will I have to
license/re-activate on each of the instances after they boot up?

Thanks,
Balu
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Windows instance licensing in OpenStack

[Jay Pipes]

On 01/23/2013 08:41 AM, Balamurugan V G wrote:
 Hi,
 
 I wonder how the Windows Licensing would work in OpenStack. Lets say I
 have a Windows Image which I have already activated. Now if I launch N
 instances of this image, what are the SO licensing implications? Will I
 have to license/re-activate on each of the instances after they boot up?

If you use XenServer or KVM, I believe so, yes. I've heard that if you
use ESXi you can get some sort of license for all Windows images on a
host. Not sure of the details of this, though, I've just heard it
through the IT grapevine...

Best,
-jay

p.s. If you find out any more solid info, please do post back :)

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Ubuntu Grizzly packages for 12.10

[Blair Zajac]

I noticed that Grizzly-2 is in 13.04.  I'd like to run them in 12.10 and not 
update the entire OS.

What's the best and/or easiest way of doing this?

1) Get the source packages and build them in a PPA?  If so, what is the 
complete list of source packages and build order to do this correctly?

2) Temporarily update sources.list to use raring, upgrade or install any 
packages with 2012 in the version number.

With either approach, are there new dependencies upon non-OpenStack packages 
that are required?

Thanks,
Blair
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Ubuntu Grizzly packages for 12.10

[Kevin Jackson]

Hi Blair,
Without looking at the specific package versions you're after, the
intention of the Ubuntu Cloud Archive is to achieve exactly this goal. It's
really easy to use - check the Ubuntu wiki pages on it:

https://wiki.ubuntu.com/ServerTeam/CloudArchive

Regards,
Kev


On 23 January 2013 15:01, Blair Zajac bl...@orcaware.com wrote:

 I noticed that Grizzly-2 is in 13.04.  I'd like to run them in 12.10 and
 not update the entire OS.

 What's the best and/or easiest way of doing this?

 1) Get the source packages and build them in a PPA?  If so, what is the
 complete list of source packages and build order to do this correctly?

 2) Temporarily update sources.list to use raring, upgrade or install any
 packages with 2012 in the version number.

 With either approach, are there new dependencies upon non-OpenStack
 packages that are required?

 Thanks,
 Blair
 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp





-- 
Kevin Jackson
@itarchitectkev
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Unable to add a floating ip address

[Alexandre De Carvalho]

hi,

I search to add a floating ip address. I use quantum and not nova-network.

Can you help me ?


Thanks for your help

-- 
Cordialement,
Alexandre DE CARVALHO
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Reinstating Trey Morris for Nova Core

[Joe Gordon]

+1

On Wed, Jan 23, 2013 at 7:58 AM, Chris Behrens cbehr...@codestud.comwrote:

 +1

 On Jan 22, 2013, at 5:38 PM, Matt Dietz matt.di...@rackspace.com wrote:

  All,
 
 I think Trey Morris has been doing really well on reviews again, so
 I'd
  like to propose him to be reinstated for Nova core. Thoughts?
 
  -Dietz
 
 
 
  ___
  Mailing list: https://launchpad.net/~openstack
  Post to : openstack@lists.launchpad.net
  Unsubscribe : https://launchpad.net/~openstack
  More help   : https://help.launchpad.net/ListHelp

 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Add NIC to running instance?

[Édouard Thuleau]

Hi all,

I took a look to the Nova blueprint [1] and I noticed that it depends on a
Quantum blueprint [2].
This blueprint [2] was created April 2012. Quantum is now able to
dynamically allocate ports and it's all Nova needs to implement this new
feature.

Can we obsoleted the Quantum blueprint [2] ?

[1] https://blueprints.launchpad.net/nova/+spec/network-adapter-hotplug
[2]
https://blueprints.launchpad.net/quantum/+spec/nova-quantum-interface-creation

Regards,
Édouard.


On Mon, Jan 14, 2013 at 6:18 PM, Vishvananda Ishaya
vishvana...@gmail.comwrote:

 This doesn't exist yet, but I thought at one point it was being worked on.
 Hot-adding nics would be a great feature for the quantum integration
 especially.

 Blueprint here:

 https://blueprints.launchpad.net/nova/+spec/network-adapter-hotplug

 There was work done here:

 https://review.openstack.org/#/c/11071/

 But it hasn't been touched for a while. Not sure what happened to it.

 Vish

 On Jan 14, 2013, at 8:00 AM, Wojciech Dec wdec.i...@gmail.com wrote:

  Hi All,
 
  is there a nova command to add a NIC to a running instance (ie without
 the need to do nova boot ... --nic 1 --nic new-nic) ?
 
  Documentation not showing up anything...
 
  Regards,
  W. Dec
  ___
  Mailing list: https://launchpad.net/~openstack
  Post to : openstack@lists.launchpad.net
  Unsubscribe : https://launchpad.net/~openstack
  More help   : https://help.launchpad.net/ListHelp


 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Problem with VNC on compute node

[Guilherme Russi]

Hello guys,

 I'm installing the folsom version and I have one computer like the
controller and one being the compute node. I can start the VM with cirros
OS but I can't use the VNC, I got the error: Failed to connect to server
(code: 1006). I've been following this tutorial:
http://docs.openstack.org/folsom/basic-install/content/basic-install_compute.html
.

Can anybody help me?

Thank you and regards.

Guilherme.
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Ubuntu Grizzly packages for 12.10

[Blair Zajac]

Hi Kevin,

Thanks for the link.  It appears that my case is not explicitly supported, 
running Folsom on 12.10 is only supported.  I'll take a look when I'm on my 
server, but if grizzly-2 packages are released for 12.04, then it'll be 
possible to point my 12.10 system at the 12.04 repo and it should just work 
;) 

Regards,
Blair

On Jan 23, 2013, at 7:26 AM, Kevin Jackson ke...@linuxservices.co.uk wrote:

 
 Hi Blair,
 Without looking at the specific package versions you're after, the intention 
 of the Ubuntu Cloud Archive is to achieve exactly this goal. It's really easy 
 to use - check the Ubuntu wiki pages on it:
 
 https://wiki.ubuntu.com/ServerTeam/CloudArchive
 
 Regards,
 Kev
 
 
 On 23 January 2013 15:01, Blair Zajac bl...@orcaware.com wrote:
 I noticed that Grizzly-2 is in 13.04.  I'd like to run them in 12.10 and not 
 update the entire OS.
 
 What's the best and/or easiest way of doing this?
 
 1) Get the source packages and build them in a PPA?  If so, what is the 
 complete list of source packages and build order to do this correctly?
 
 2) Temporarily update sources.list to use raring, upgrade or install any 
 packages with 2012 in the version number.
 
 With either approach, are there new dependencies upon non-OpenStack packages 
 that are required?
 
 Thanks,
 Blair
 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp
 
 
 
 
 -- 
 Kevin Jackson
 @itarchitectkev
 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Openstack with ESXi - NetworkNotFoundForBridge: Network could not be found for bridge

[Balamurugan V G]

When i temporarily hard code the network_name variable in
/usr/lib/python2.7/dist-packages/nova/virt/vmwareapi/vmops.py as below:

def _get_vif_infos():
vif_infos = []
for (network, mapping) in network_info:
mac_address = mapping['mac']
#Balu
#network_name = network['bridge']
network_name = 'br-eth1'

The instance creation proceeds and then errors for another reason as shown
below:

2013-01-23 08:35:12 DEBUG nova.virt.vmwareapi.read_write_util
[req-ec9d0530-ca3d-4a8e-8166-834f6e11ed32 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] Exception during HTTP connection close in
VMWareHTTpWrite. Exception is '' from (pid=14354) close
/usr/lib/python2.7/dist-packages/nova/virt/vmwareapi/read_write_util.py:146
2013-01-23 08:35:12 DEBUG nova.virt.vmwareapi.vmware_images
[req-ec9d0530-ca3d-4a8e-8166-834f6e11ed32 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] [instance:
6a0bfd1b-e4c4-4430-8898-312e73decd62] Downloaded image
4d70a998-a51e-4557-81fa-23747db12305 from glance image server from
(pid=14354) fetch_image
/usr/lib/python2.7/dist-packages/nova/virt/vmwareapi/vmware_images.py:109
2013-01-23 08:35:12 DEBUG nova.virt.vmwareapi.read_write_util
[req-ec9d0530-ca3d-4a8e-8166-834f6e11ed32 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] Exception during HTTP connection close in
VMWareHTTpWrite. Exception is  from (pid=14354) close
/usr/lib/python2.7/dist-packages/nova/virt/vmwareapi/read_write_util.py:146
2013-01-23 08:35:12 DEBUG nova.virt.vmwareapi.vmops
[req-ec9d0530-ca3d-4a8e-8166-834f6e11ed32 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] [instance:
6a0bfd1b-e4c4-4430-8898-312e73decd62] Downloaded image file data
4d70a998-a51e-4557-81fa-23747db12305 to the ESX data store datastore1 from
(pid=14354) _fetch_image_on_esx_datastore
/usr/lib/python2.7/dist-packages/nova/virt/vmwareapi/vmops.py:308
2013-01-23 08:35:19 DEBUG nova.virt.vmwareapi.vmops
[req-ec9d0530-ca3d-4a8e-8166-834f6e11ed32 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] [instance:
6a0bfd1b-e4c4-4430-8898-312e73decd62] Reconfiguring VM instance to attach
the image disk from (pid=14354) _attach_vmdk_to_the_vm
/usr/lib/python2.7/dist-packages/nova/virt/vmwareapi/vmops.py:323
2013-01-23 08:35:27 WARNING nova.virt.vmwareapi.driver [-] Task
[ReconfigVM_Task] (returnval){
   value = haTask-23-vim.VirtualMachine.reconfigure-449287255
   _type = Task
 } status: error Unable to access file
/vmfs/volumes/5088d916-58b2aa06-6a35-d4ae52a0f879/instance-003f/instance-003f.vmdk
2013-01-23 08:35:27 ERROR nova.compute.manager
[req-ec9d0530-ca3d-4a8e-8166-834f6e11ed32 9ac7dbe62fb349ce84927598a0f54d68
b439758af3814f739fe7ab09b98a0120] [instance:
6a0bfd1b-e4c4-4430-8898-312e73decd62] Instance failed to spawn


The file actually exists on the ESXi Server, but its size is just a few
bytes. So looks like it was still copying when it aborted. There are a few
exception in VMWareHTTpWrite as well.

So there are two issues:
   1. Its not picking up the bridge name
   2. Unable to access(or copy) the vmdk instance file

Regards,
Balu
On Wed, Jan 23, 2013 at 4:08 PM, Balamurugan V G balamuruga...@gmail.comwrote:

 I see that there is no value being passed for 'bridge'. The snippet from
 the nova-compute log just before the Execption is below:


 2013-01-23 02:33:37 DEBUG nova.compute.manager
 [req-9c972e4e-3f8b-4cc3-b151-963b71f0b9a2 9ac7dbe62fb349ce84927598a0f54d68
 b439758af3814f739fe7ab09b98a0120] [instance:
 ad7a8f84-f303-4733-9822-2e81b7cbc407] Instance network_info:
 |[VIF({'network': Network({*'bridge': '',* 'subnets': [Subnet({'ips':
 [FixedIP({'meta': {}, 'version': 4, 'type': 'fixed', 'floating_ips': [],
 'address': u'50.50.1.4'})], 'version': 4, 'meta': {'dhcp_server':
 u'50.50.1.2'}, 'dns': [], 'routes': [], 'cidr': u'50.50.1.0/24',
 'gateway': IP({'meta': {}, 'version': 4, 'type': 'gateway', 'address':
 u'50.50.1.1'})})], 'meta': {'injected': False, 'tenant_id':
 u'b439758af3814f739fe7ab09b98a0120'}, 'id':
 u'dcef8ce4-dff0-4a54-9112-9695c28c02d5', 'label': u'net1'}), 'meta': {},
 'id': u'0c68ea85-b289-486e-bdaf-999bc35256a9', 'address':
 u'fa:16:3e:45:e5:6b'})]| from (pid=13103) _allocate_network
 /usr/lib/python2.7/dist-packages/nova/compute/manager.py:715

 What could be going wrong here?

 Regards,
 Balu

 On Wed, Jan 23, 2013 at 1:08 PM, Balamurugan V G 
 balamuruga...@gmail.comwrote:

 Hi,

 I have a two node OpenStack Folsom Setup. One node runs all services with
 KVM. The other nodes is a Compute Node for ESXi 5.1. I have set the
 availabality_zones for each of this so that I can schedule instances as per
 my need. I am able to operate the instances on the KVM just fine. But when
 I launch an instance for ESXi, it goes to ERROR state with the error
 'NetworkNotFoundForBridge: Network could not be found for bridge'.

 After the vanilla Folsom installation, I was 

Re: [Openstack] Problem with VNC on compute node

[Surya_Prabhakar]

On 01/23/13 21:57, Guilherme Russi wrote:
 Hello guys,

  I'm installing the folsom version and I have one computer like the 
 controller and one being the compute node. I can start the VM with 
 cirros OS but I can't use the VNC, I got the error: Failed to connect 
 to server (code: 1006). I've been following this tutorial: 
 http://docs.openstack.org/folsom/basic-install/content/basic-install_compute.html.

 Can anybody help me?

Vnc uses seperate port to connect. Are there any port blockers between
the machine where you run your browser and the controller node?


Surya.

 Thank you and regards.

 Guilherme.

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Windows instance licensing in OpenStack

[Peter Pouliot]

Ok,

I am no MS licensing expert, however.   Here is my understanding of it.

If you are using a windows vm on a hypervisor other than windows server with 
the Hyper-V role enabled you need to license per vm.  



If you are using windows server with Hyper-V enable you can license at the 
hypervisor/server rather than at the vm level.

This does not include Hyper-V server, which only requires licensing of the 
windows guests.

p



Peter J. Pouliot, CISSP
Senior SDET, OpenStack

Microsoft 
New England Research  Development Center
One Memorial Drive,Cambridge, MA 02142
ppoul...@microsoft.com | Tel: +1(857) 453 6436

-Original Message-
From: openstack-bounces+ppouliot=microsoft@lists.launchpad.net 
[mailto:openstack-bounces+ppouliot=microsoft@lists.launchpad.net] On Behalf 
Of Jay Pipes
Sent: Wednesday, January 23, 2013 9:31 AM
To: openstack@lists.launchpad.net
Subject: Re: [Openstack] Windows instance licensing in OpenStack

On 01/23/2013 08:41 AM, Balamurugan V G wrote:
 Hi,
 
 I wonder how the Windows Licensing would work in OpenStack. Lets say I
 have a Windows Image which I have already activated. Now if I launch N
 instances of this image, what are the SO licensing implications? Will I
 have to license/re-activate on each of the instances after they boot up?

If you use XenServer or KVM, I believe so, yes. I've heard that if you
use ESXi you can get some sort of license for all Windows images on a
host. Not sure of the details of this, though, I've just heard it
through the IT grapevine...

Best,
-jay

p.s. If you find out any more solid info, please do post back :)

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Glance image upload Keystone error

[Adam Young]

On 01/23/2013 06:34 AM, Trinath Somanchi wrote:

Hi Stackers-

I have installed glance and Keystone and configured them.


Not sure how you installed, but you need to make sure the PKI 
provisioning is done.  You can do it by hand with the keystone_manage 
command.  Make sure you run it as the user that Keystone is going to run 
as, as it creates the certificates and Keystone (ajnd only Keystone) 
needs to be able to access those.




But When I upload a test image with glance, I got this error in 
keystone logs


(sqlalchemy.engine.base.Engine): 2013-01-23 17:04:57,904 INFO 
('106298a47e5a4d129c7b8571e188c51e', 1)
(keystone.common.cms): 2013-01-23 17:04:57,990 ERROR Signing error: 
Error opening signer certificate /etc/keystone/ssl/certs/signing_cert.pem
140702974211744:error:02001002:system library:fopen:No such file or 
directory:bss_file.c:398:fopen('/etc/keystone/ssl/certs/signing_cert.pem','r')
140702974211744:error:20074002:BIO routines:FILE_CTRL:system 
lib:bss_file.c:400:

unable to load certificate

(root): 2013-01-23 17:04:57,991 ERROR Command 'openssl' returned 
non-zero exit status 3

Traceback (most recent call last):
  File 
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/wsgi.py, 
line 215, in __call__

result = method(context, **params)
  File 
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/token/controllers.py, 
line 118, in authenticate

config.CONF.signing.keyfile)
  File 
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py, 
line 140, in cms_sign_token
output = cms_sign_text(text, signing_cert_file_name, 
signing_key_file_name)
  File 
/usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py, 
line 135, in cms_sign_text

raise subprocess.CalledProcessError(retcode, openssl)
CalledProcessError: Command 'openssl' returned non-zero exit status 3

Kindly help me resolve the issue

--
Regards,
--
Trinath Somanchi,
+91 9866 235 130


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Instances and ARP

[Joe Warren-Meeks]

Hi all,

Thanks to Belmiro, I found how to fix this properly, rather than a hack.

For future googlers,

cd /etc/libvirt/nwfilter
cp nova-base.xml nova-base.xml.bak
virsh nwfilter-edit nova-base
remove or comment out the spoof lines you don't want

New instances won't have the rules.

To update old instances:
virsh destroy instance-xxx
virsh undefine instance-xxx
cd /var/lib/nova/instances/instance-xxx
virsh define libvirt.xml
virsh start instance-xxx

Thanks all.

 -- joe.



On 21 January 2013 11:49, Belmiro Moreira 
moreira.belmiro.email.li...@gmail.com wrote:

 Hi Joe,
 nova network filtering rules are preventing ip-spoofing.
 There is a proposal to modify this behavior when using HA in instances.
 See thread:
 [openstack-dev] VM level HA. Changes in firewall.py question.

 You can check with:
 virsh nwfilter-dumpxml nova-base

 cheers,
 Belmiro

 On Jan 21, 2013, at 12:25 PM, Joe Warren-Meeks joe.warren.me...@gmail.com
 wrote:

  Hi guys,
 
  I've got openstack essex configured with vlanmanager and an external
 gateway and all my networking runs ok generally.
 
  However, I'm trying to setup Linux HA on two instances. They run on
 separate compute nodes and can see each other just fine. hb_takeover and
 hb_standby works perfectly. The problem is that nothing outside of the
 instance with the HA IP address can connect to it.
 
  It seems that something is ignoring the arp is-at from the instance.
 Doing a tcpdump on the compute node's bridged network and the instance's
 eth0 I can arp requests and responses fine for its main IP, but when I try
 to get to the alias address, I see arp requests only on the compute side.
 On the instance side I see it responding, but this doesn't show up on the
 bridged interface on the compute node.
 
  Has anyone seen this before? My google-fu is failing to find anything.
 
  Kind regards
 
   -- joe.
 
 
  ___
  Mailing list: https://launchpad.net/~openstack
  Post to : openstack@lists.launchpad.net
  Unsubscribe : https://launchpad.net/~openstack
  More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Windows instance licensing in OpenStack

[Balamurugan V G]

Thanks for the inputs everyone.

My concern is if the activation/licence key input needs to be done on each
VM after they boot up or its just as simple as having as many licences as
the VMs before hand and nothing needs to be done after the instance boots
up.

Regards,
Balu

On Wed, Jan 23, 2013 at 10:31 PM, Peter Pouliot ppoul...@microsoft.comwrote:

 Ok,

 I am no MS licensing expert, however.   Here is my understanding of it.

 If you are using a windows vm on a hypervisor other than windows server
 with the Hyper-V role enabled you need to license per vm.



 If you are using windows server with Hyper-V enable you can license at the
 hypervisor/server rather than at the vm level.

 This does not include Hyper-V server, which only requires licensing of the
 windows guests.

 p



 Peter J. Pouliot, CISSP
 Senior SDET, OpenStack

 Microsoft
 New England Research  Development Center
 One Memorial Drive,Cambridge, MA 02142
 ppoul...@microsoft.com | Tel: +1(857) 453 6436

 -Original Message-
 From: openstack-bounces+ppouliot=microsoft@lists.launchpad.net[mailto:
 openstack-bounces+ppouliot=microsoft@lists.launchpad.net] On Behalf
 Of Jay Pipes
 Sent: Wednesday, January 23, 2013 9:31 AM
 To: openstack@lists.launchpad.net
 Subject: Re: [Openstack] Windows instance licensing in OpenStack

 On 01/23/2013 08:41 AM, Balamurugan V G wrote:
  Hi,
 
  I wonder how the Windows Licensing would work in OpenStack. Lets say I
  have a Windows Image which I have already activated. Now if I launch N
  instances of this image, what are the SO licensing implications? Will I
  have to license/re-activate on each of the instances after they boot up?

 If you use XenServer or KVM, I believe so, yes. I've heard that if you
 use ESXi you can get some sort of license for all Windows images on a
 host. Not sure of the details of this, though, I've just heard it
 through the IT grapevine...

 Best,
 -jay

 p.s. If you find out any more solid info, please do post back :)

 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp

 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Glance image upload Keystone error

[Dolph Mathews]

I've seen this question come up a couple times now; this error handling
here needs to be improved with a decent error message.

I opened a bug on the issue:
https://bugs.launchpad.net/keystone/+bug/1103569


-Dolph


On Wed, Jan 23, 2013 at 11:04 AM, Adam Young ayo...@redhat.com wrote:

  On 01/23/2013 06:34 AM, Trinath Somanchi wrote:

 Hi Stackers-

  I have installed glance and Keystone and configured them.


 Not sure how you installed, but you need to make sure the PKI provisioning
 is done.  You can do it by hand with the keystone_manage command.  Make
 sure you run it as the user that Keystone is going to run as, as it creates
 the certificates and Keystone (ajnd only Keystone) needs to be able to
 access those.


  But When I upload a test image with glance, I got this error in keystone
 logs

  (sqlalchemy.engine.base.Engine): 2013-01-23 17:04:57,904 INFO
 ('106298a47e5a4d129c7b8571e188c51e', 1)
 (keystone.common.cms): 2013-01-23 17:04:57,990 ERROR Signing error: Error
 opening signer certificate /etc/keystone/ssl/certs/signing_cert.pem
 140702974211744:error:02001002:system library:fopen:No such file or
 directory:bss_file.c:398:fopen('/etc/keystone/ssl/certs/signing_cert.pem','r')
 140702974211744:error:20074002:BIO routines:FILE_CTRL:system
 lib:bss_file.c:400:
 unable to load certificate

  (root): 2013-01-23 17:04:57,991 ERROR Command 'openssl' returned
 non-zero exit status 3
 Traceback (most recent call last):
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/wsgi.py,
 line 215, in __call__
 result = method(context, **params)
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/token/controllers.py,
 line 118, in authenticate
 config.CONF.signing.keyfile)
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py,
 line 140, in cms_sign_token
 output = cms_sign_text(text, signing_cert_file_name,
 signing_key_file_name)
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py,
 line 135, in cms_sign_text
 raise subprocess.CalledProcessError(retcode, openssl)
 CalledProcessError: Command 'openssl' returned non-zero exit status 3

  Kindly help me resolve the issue

  --
 Regards,
 --
 Trinath Somanchi,
 +91 9866 235 130


 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp



 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Windows instance licensing in OpenStack

[Tim Bell]

 

Sounds like activation key management would be a great feature for the
Windows cloud-init so this could be passed in as meta data.

 

Tim

 

From: openstack-bounces+tim.bell=cern...@lists.launchpad.net
[mailto:openstack-bounces+tim.bell=cern...@lists.launchpad.net] On Behalf Of
Balamurugan V G
Sent: 23 January 2013 18:12
To: Peter Pouliot
Cc: openstack@lists.launchpad.net
Subject: Re: [Openstack] Windows instance licensing in OpenStack

 

Thanks for the inputs everyone.

My concern is if the activation/licence key input needs to be done on each
VM after they boot up or its just as simple as having as many licences as
the VMs before hand and nothing needs to be done after the instance boots
up.

Regards,
Balu

On Wed, Jan 23, 2013 at 10:31 PM, Peter Pouliot ppoul...@microsoft.com
mailto:ppoul...@microsoft.com  wrote:

Ok,

I am no MS licensing expert, however.   Here is my understanding of it.

If you are using a windows vm on a hypervisor other than windows server with
the Hyper-V role enabled you need to license per vm.



If you are using windows server with Hyper-V enable you can license at the
hypervisor/server rather than at the vm level.

This does not include Hyper-V server, which only requires licensing of the
windows guests.

p



Peter J. Pouliot, CISSP
Senior SDET, OpenStack

Microsoft
New England Research  Development Center
One Memorial Drive,Cambridge, MA 02142
ppoul...@microsoft.com mailto:ppoul...@microsoft.com  | Tel: +1(857) 453
6436

-Original Message-
From: openstack-bounces+ppouliot=microsoft@lists.launchpad.net
mailto:microsoft@lists.launchpad.net
[mailto:openstack-bounces+ppouliot mailto:openstack-bounces%2Bppouliot
=microsoft@lists.launchpad.net
mailto:microsoft@lists.launchpad.net ] On Behalf Of Jay Pipes
Sent: Wednesday, January 23, 2013 9:31 AM
To: openstack@lists.launchpad.net mailto:openstack@lists.launchpad.net 
Subject: Re: [Openstack] Windows instance licensing in OpenStack

On 01/23/2013 08:41 AM, Balamurugan V G wrote:
 Hi,

 I wonder how the Windows Licensing would work in OpenStack. Lets say I
 have a Windows Image which I have already activated. Now if I launch N
 instances of this image, what are the SO licensing implications? Will I
 have to license/re-activate on each of the instances after they boot up?

If you use XenServer or KVM, I believe so, yes. I've heard that if you
use ESXi you can get some sort of license for all Windows images on a
host. Not sure of the details of this, though, I've just heard it
through the IT grapevine...

Best,
-jay

p.s. If you find out any more solid info, please do post back :)

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
mailto:openstack@lists.launchpad.net 
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
mailto:openstack@lists.launchpad.net 
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

 



smime.p7s
Description: S/MIME cryptographic signature
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Windows instance licensing in OpenStack

[Willard Dennis]

See 
http://www.microsoft.com/licensing/existing-customers/product-activation-faq.aspx

 

Looks like KMS would be the appropriate means; your MSFT reseller would sell 
you a KMS license key to use for the appropriate pool of server / app 
instances, then it is loaded into the KMS server, which then activates the 
instantiated systems. I checked with MSFT Licensing, the rep said there is no 
limit on number of uses of a KMS license key, just an aggregate activation 
threshold. See further http://technet.microsoft.com/en-us/windows/dd197314.aspx 
for more details.

 

We don’t use KMS here, so don’t know about the hairy details, sorry...

 

Best,

Will


 


From: Peter Pouliot
Sent: ‎January‎ ‎23‎, ‎2013 ‎12‎:‎04‎ ‎PM
To: Jay Pipes, openstack@lists.launchpad.net
Subject: Re: [Openstack] Windows instance licensing in OpenStack



Ok,

I am no MS licensing expert, however.   Here is my understanding of it.

If you are using a windows vm on a hypervisor other than windows server with 
the Hyper-V role enabled you need to license per vm.  



If you are using windows server with Hyper-V enable you can license at the 
hypervisor/server rather than at the vm level.

This does not include Hyper-V server, which only requires licensing of the 
windows guests.

p



Peter J. Pouliot, CISSP
Senior SDET, OpenStack

Microsoft 
New England Research  Development Center
One Memorial Drive,Cambridge, MA 02142
ppoul...@microsoft.com | Tel: +1(857) 453 6436

-Original Message-
From: openstack-bounces+ppouliot=microsoft@lists.launchpad.net 
[mailto:openstack-bounces+ppouliot=microsoft@lists.launchpad.net] On Behalf 
Of Jay Pipes
Sent: Wednesday, January 23, 2013 9:31 AM
To: openstack@lists.launchpad.net
Subject: Re: [Openstack] Windows instance licensing in OpenStack

On 01/23/2013 08:41 AM, Balamurugan V G wrote:
 Hi,
 
 I wonder how the Windows Licensing would work in OpenStack. Lets say I
 have a Windows Image which I have already activated. Now if I launch N
 instances of this image, what are the SO licensing implications? Will I
 have to license/re-activate on each of the instances after they boot up?

If you use XenServer or KVM, I believe so, yes. I've heard that if you
use ESXi you can get some sort of license for all Windows images on a
host. Not sure of the details of this, though, I've just heard it
through the IT grapevine...

Best,
-jay

p.s. If you find out any more solid info, please do post back :)

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Windows instance licensing in OpenStack

[Peter Pouliot]

Site/Volume licensing works too.   The KMS is there to enable/enforce the local 
activiation/licensing.

The details of any licenses are also affected by the product sku’s that are 
involved.

Peter J. Pouliot, CISSP
Senior SDET, OpenStack

Microsoft
New England Research  Development Center
One Memorial Drive,Cambridge, MA 02142
ppoul...@microsoft.commailto:ppoul...@microsoft.com | Tel: +1(857) 453 6436

From: Willard Dennis [mailto:willardden...@live.com]
Sent: Wednesday, January 23, 2013 3:40 PM
To: Jay Pipes; openstack@lists.launchpad.net; Peter Pouliot
Subject: RE: [Openstack] Windows instance licensing in OpenStack

See 
http://www.microsoft.com/licensing/existing-customers/product-activation-faq.aspx

Looks like KMS would be the appropriate means; your MSFT reseller would sell 
you a KMS license key to use for the appropriate pool of server / app 
instances, then it is loaded into the KMS server, which then activates the 
instantiated systems. I checked with MSFT Licensing, the rep said there is no 
limit on number of uses of a KMS license key, just an aggregate activation 
threshold. See further http://technet.microsoft.com/en-us/windows/dd197314.aspx 
for more details.

We don’t use KMS here, so don’t know about the hairy details, sorry...

Best,
Will


From: Peter Pouliot
Sent: ‎January‎ ‎23‎, ‎2013 ‎12‎:‎04‎ ‎PM
To: Jay Pipes, 
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] Windows instance licensing in OpenStack

Ok,

I am no MS licensing expert, however.   Here is my understanding of it.

If you are using a windows vm on a hypervisor other than windows server with 
the Hyper-V role enabled you need to license per vm.



If you are using windows server with Hyper-V enable you can license at the 
hypervisor/server rather than at the vm level.

This does not include Hyper-V server, which only requires licensing of the 
windows guests.

p



Peter J. Pouliot, CISSP
Senior SDET, OpenStack

Microsoft
New England Research  Development Center
One Memorial Drive,Cambridge, MA 02142
ppoul...@microsoft.commailto:ppoul...@microsoft.com | Tel: +1(857) 453 6436

-Original Message-
From: 
openstack-bounces+ppouliot=microsoft@lists.launchpad.netmailto:openstack-bounces+ppouliot=microsoft@lists.launchpad.net
 [mailto:openstack-bounces+ppouliot=microsoft@lists.launchpad.net] On 
Behalf Of Jay Pipes
Sent: Wednesday, January 23, 2013 9:31 AM
To: openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Subject: Re: [Openstack] Windows instance licensing in OpenStack

On 01/23/2013 08:41 AM, Balamurugan V G wrote:
 Hi,

 I wonder how the Windows Licensing would work in OpenStack. Lets say I
 have a Windows Image which I have already activated. Now if I launch N
 instances of this image, what are the SO licensing implications? Will I
 have to license/re-activate on each of the instances after they boot up?

If you use XenServer or KVM, I believe so, yes. I've heard that if you
use ESXi you can get some sort of license for all Windows images on a
host. Not sure of the details of this, though, I've just heard it
through the IT grapevine...

Best,
-jay

p.s. If you find out any more solid info, please do post back :)

___
Mailing list: https://launchpad.net/~openstack
Post to : 
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

___
Mailing list: https://launchpad.net/~openstack
Post to : 
openstack@lists.launchpad.netmailto:openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack] Folsom with Quantum on RHEL6.3

[mohammad kashif]

Hi

I have a running Essex OpenStack cluster on Ubuntu with multi host network
set up. Floating IP etc is working. I am planning to install  same kind  of
setup with  Folsom on RHEL 6.3 and quantum. I have some questions

Most of the documents are mentioning quantum server with other nova
services and a separate network server running dhcp agent and L2/L3 agents.
Considering that I have a decent server, is it OK to merge all the services
except compute node on same machine?

If I want to support floating IP, do I have to install L3 agent on
controller/network node?

Is it necessary to have a separate data and management network ? I am not
expecting a lot of data crossing the network initially.

I am planning to use RHEL6.3, any thought about it.

Thanks for any help.

Cheers
Kashif
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Tenant Isolation - Virtualbox

[Ronivon Costa]

Hello,


I have just installed Folsom in a physical server, and the tenants can also
ping and ssh into each others instances.
I think there is something wrong with my setup.

Below I provide some info from the deployment.
Any tip will be very much appreciated.

Thanks.
Roni


nova-manage network list
id   IPv4   IPv6   start address   DNS1   DNS2
  VlanID project uuid
1 10.0.0.0/24   None   10.0.0.3   None   None
100 c0561ee64e6c40b2aea3bdcf47916f18
c417baf7-f989-49d9-973d-f6f2b51a2d5c
2 10.0.1.0/24   None   10.0.1.3   None   None
101 36ae086d927f49039cedfcb046463876
4bff308a-7990-46a4-952b-772d4953cb10


--

brctl show

bridge name bridge id STP enabled interfaces
br100 8000.fa163e7b7397 no vlan100
vnet0
br101 8000.fa163e7baec0 no vlan101
vnet1

---

br100 Link encap:Ethernet  HWaddr fa:16:3e:7b:73:97
  inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
  inet6 addr: fe80::b016:8dff:fefa:43db/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:531 errors:0 dropped:0 overruns:0 frame:0
  TX packets:803 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:66890 (66.8 KB)  TX bytes:90421 (90.4 KB)

br101 Link encap:Ethernet  HWaddr fa:16:3e:7b:ae:c0
  inet addr:10.0.1.1  Bcast:10.0.1.255  Mask:255.255.255.0
  inet6 addr: fe80::c41:bbff:fed4:354b/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:422 errors:0 dropped:0 overruns:0 frame:0
  TX packets:574 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:65212 (65.2 KB)  TX bytes:69840 (69.8 KB)

dummy0Link encap:Ethernet  HWaddr 02:dc:e1:5c:aa:5e
  inet6 addr: fe80::dc:e1ff:fe5c:aa5e/64 Scope:Link
  UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:169 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:0 (0.0 B)  TX bytes:23932 (23.9 KB)

dummy1Link encap:Ethernet  HWaddr 72:2d:2b:59:a2:d1
  BROADCAST NOARP  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

dummy2Link encap:Ethernet  HWaddr 72:6f:28:d7:e8:cd
  BROADCAST NOARP  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

eth0  Link encap:Ethernet  HWaddr 00:1a:92:08:1f:47
  inet addr:10.100.200.126  Bcast:10.100.200.255  Mask:255.255.255.0
  inet6 addr: fe80::21a:92ff:fe08:1f47/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:210280 errors:1 dropped:0 overruns:0 frame:1
  TX packets:20752 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000
  RX bytes:310541700 (310.5 MB)  TX bytes:1983489 (1.9 MB)

loLink encap:Local Loopback
  inet addr:127.0.0.1  Mask:255.0.0.0
  inet6 addr: ::1/128 Scope:Host
  UP LOOPBACK RUNNING  MTU:16436  Metric:1
  RX packets:91449 errors:0 dropped:0 overruns:0 frame:0
  TX packets:91449 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:600766448 (600.7 MB)  TX bytes:600766448 (600.7 MB)

vlan100   Link encap:Ethernet  HWaddr fa:16:3e:7b:73:97
  inet6 addr: fe80::f816:3eff:fe7b:7397/64 Scope:Link
  UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:71 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:0 (0.0 B)  TX bytes:11025 (11.0 KB)

vlan101   Link encap:Ethernet  HWaddr fa:16:3e:7b:ae:c0
  inet6 addr: fe80::f816:3eff:fe7b:aec0/64 Scope:Link
  UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:95 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0
  RX bytes:0 (0.0 B)  TX bytes:12033 (12.0 KB)

vnet0 Link encap:Ethernet  HWaddr fe:16:3e:7b:0b:14
  inet6 addr: fe80::fc16:3eff:fe7b:b14/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:531 errors:0 dropped:0 overruns:0 frame:0
  TX packets:764 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:500
  RX bytes:74324 (74.3 KB)  TX bytes:84372 (84.3 KB)

vnet1 Link 

Re: [Openstack] Tenant Isolation - Virtualbox

[Vishvananda Ishaya]

There is nothing wrong with your setup. L3 routing is done by the network node. 
L3 is already blocked by security groups. The vlans provide L2 isolation. 
Essentially we handle this with convention, as in tell your tenants not to open 
up their firewalls if they don't want to be accessed by other tenants.

for example:

nova secgroup-add-rule default tcp 22 22 192.168.0.0/24 # or some other 
restricted range

instead of:

nova secgroup-add-rule default tcp 22 22 0.0.0.0/0

People seem to expect l3 traffic to be totally blocked between tenants. I'm not 
totally convinced that is good behavior, but it should be possible to produce a 
patch that will do this. In fact I've put together a potential version here:

https://review.openstack.org/#/c/20362/

Unless I've messed something up, with this patch, you should be able to set:

bridge_forward_inteface=xxx # where xxx is your public_interface

And get the behavior you expect.

Vish

On Jan 23, 2013, at 2:27 PM, Ronivon Costa ronivon.co...@gmail.com wrote:

 Hello,
 
 
 I have just installed Folsom in a physical server, and the tenants can also 
 ping and ssh into each others instances. 
 I think there is something wrong with my setup.
 
 Below I provide some info from the deployment.
 Any tip will be very much appreciated.
 
 Thanks.
 Roni
 
 
 nova-manage network list
 idIPv4IPv6start address   DNS1
 DNS2VlanID  project uuid   
 1 10.0.0.0/24 None10.0.0.3None
 None100 c0561ee64e6c40b2aea3bdcf47916f18
 c417baf7-f989-49d9-973d-f6f2b51a2d5c
 2 10.0.1.0/24 None10.0.1.3None
 None101 36ae086d927f49039cedfcb046463876
 4bff308a-7990-46a4-952b-772d4953cb10
 
 
 --
 
 brctl show
 
 bridge name   bridge id   STP enabled interfaces
 br100 8000.fa163e7b7397   no  vlan100
   
 vnet0
 br101 8000.fa163e7baec0   no  vlan101
   vnet1
 
 ---
 
 br100 Link encap:Ethernet  HWaddr fa:16:3e:7b:73:97  
   inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
   inet6 addr: fe80::b016:8dff:fefa:43db/64 Scope:Link
   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
   RX packets:531 errors:0 dropped:0 overruns:0 frame:0
   TX packets:803 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0 
   RX bytes:66890 (66.8 KB)  TX bytes:90421 (90.4 KB)
 
 br101 Link encap:Ethernet  HWaddr fa:16:3e:7b:ae:c0  
   inet addr:10.0.1.1  Bcast:10.0.1.255  Mask:255.255.255.0
   inet6 addr: fe80::c41:bbff:fed4:354b/64 Scope:Link
   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
   RX packets:422 errors:0 dropped:0 overruns:0 frame:0
   TX packets:574 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0 
   RX bytes:65212 (65.2 KB)  TX bytes:69840 (69.8 KB)
 
 dummy0Link encap:Ethernet  HWaddr 02:dc:e1:5c:aa:5e  
   inet6 addr: fe80::dc:e1ff:fe5c:aa5e/64 Scope:Link
   UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
   RX packets:0 errors:0 dropped:0 overruns:0 frame:0
   TX packets:169 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0 
   RX bytes:0 (0.0 B)  TX bytes:23932 (23.9 KB)
 
 dummy1Link encap:Ethernet  HWaddr 72:2d:2b:59:a2:d1  
   BROADCAST NOARP  MTU:1500  Metric:1
   RX packets:0 errors:0 dropped:0 overruns:0 frame:0
   TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0 
   RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 
 dummy2Link encap:Ethernet  HWaddr 72:6f:28:d7:e8:cd  
   BROADCAST NOARP  MTU:1500  Metric:1
   RX packets:0 errors:0 dropped:0 overruns:0 frame:0
   TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0 
   RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
 
 eth0  Link encap:Ethernet  HWaddr 00:1a:92:08:1f:47  
   inet addr:10.100.200.126  Bcast:10.100.200.255  Mask:255.255.255.0
   inet6 addr: fe80::21a:92ff:fe08:1f47/64 Scope:Link
   UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
   RX packets:210280 errors:1 dropped:0 overruns:0 frame:1
   TX packets:20752 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:1000 
   RX bytes:310541700 (310.5 MB)  TX bytes:1983489 (1.9 MB)
 
 loLink encap:Local Loopback  
   inet addr:127.0.0.1  Mask:255.0.0.0
   inet6 addr: ::1/128 Scope:Host
   UP LOOPBACK RUNNING  MTU:16436  Metric:1
   RX packets:91449 errors:0 

Re: [Openstack] Multinic issue (essex)

[Ajiva Fan]

hello
I'm trying to use multi nics in essex, but it get an error:
ERROR: NoNetworksFound: No networks defined. (HTTP 400)

and this link https://bugs.launchpad.net/nova/+bug/953426 says that
essex currently not enable specific nics. and i tried to use that
patch in essex but failed.

I'm wondering why you can launch an instance with single nic while
another with two. Do you mind to tell me how you achieve that?

thank you very much

On 1/23/13, Jesús Moreno j.more...@gmail.com wrote:
 Hi,

 I'm trying to use multinic to create a scenario with two instances: Client
 (with one network interface) and Router (with two interfaces):

 Client(10.0.14.5)  (10.0.14.9)Router(10.0.2.9)

 I have modified the gateway in Client routing table, setting Router as the
 new gateway, and activated ip_forward in Router. However, when I ping
 10.0.2.9 from Client I get no reply. Capturing the traffic with tcpdump I
 have checked that  Router gets echo requests packets and that Router sends
 echo replys, but then they get lost somewhere, as I have captured the
 traffic in the computation nodes bridges and the echo reply packets don't
 appear. I guess that it could be a problem related with Vlans. Any ideas?
 Any help would be greatly appreciated.

 Regards,
 J. Moreno.


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Glance image upload Keystone error

[Trinath Somanchi]

Hi-

Thanks for the help in replies.

I have installed keystone from the source code rather than the apt-get
command,

Kindly guide me on how to bring up keystone when installed from the source
code.

Thanking you all


-
Trinath


On Wed, Jan 23, 2013 at 10:34 PM, Adam Young ayo...@redhat.com wrote:

  On 01/23/2013 06:34 AM, Trinath Somanchi wrote:

 Hi Stackers-

  I have installed glance and Keystone and configured them.


 Not sure how you installed, but you need to make sure the PKI provisioning
 is done.  You can do it by hand with the keystone_manage command.  Make
 sure you run it as the user that Keystone is going to run as, as it creates
 the certificates and Keystone (ajnd only Keystone) needs to be able to
 access those.


  But When I upload a test image with glance, I got this error in keystone
 logs

  (sqlalchemy.engine.base.Engine): 2013-01-23 17:04:57,904 INFO
 ('106298a47e5a4d129c7b8571e188c51e', 1)
 (keystone.common.cms): 2013-01-23 17:04:57,990 ERROR Signing error: Error
 opening signer certificate /etc/keystone/ssl/certs/signing_cert.pem
 140702974211744:error:02001002:system library:fopen:No such file or
 directory:bss_file.c:398:fopen('/etc/keystone/ssl/certs/signing_cert.pem','r')
 140702974211744:error:20074002:BIO routines:FILE_CTRL:system
 lib:bss_file.c:400:
 unable to load certificate

  (root): 2013-01-23 17:04:57,991 ERROR Command 'openssl' returned
 non-zero exit status 3
 Traceback (most recent call last):
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/wsgi.py,
 line 215, in __call__
 result = method(context, **params)
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/token/controllers.py,
 line 118, in authenticate
 config.CONF.signing.keyfile)
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py,
 line 140, in cms_sign_token
 output = cms_sign_text(text, signing_cert_file_name,
 signing_key_file_name)
   File
 /usr/local/lib/python2.7/dist-packages/keystone-2013.1-py2.7.egg/keystone/common/cms.py,
 line 135, in cms_sign_text
 raise subprocess.CalledProcessError(retcode, openssl)
 CalledProcessError: Command 'openssl' returned non-zero exit status 3

  Kindly help me resolve the issue

  --
 Regards,
 --
 Trinath Somanchi,
 +91 9866 235 130


 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp



 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp




-- 
Regards,
--
Trinath Somanchi,
+91 9866 235 130
___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Folsom with Quantum on RHEL6.3

[Gary Kotton]

On 01/24/2013 12:02 AM, mohammad kashif wrote:


Hi

I have a running Essex OpenStack cluster on Ubuntu with multi host 
network set up. Floating IP etc is working. I am planning to install  
same kind  of setup with  Folsom on RHEL 6.3 and quantum. I have some 
questions


Most of the documents are mentioning quantum server with other nova 
services and a separate network server running dhcp agent and L2/L3 
agents. Considering that I have a decent server, is it OK to merge all 
the services except compute node on same machine?


There are a number of different deployment options. The ideal setup 
would be something like:

http://docs.openstack.org/trunk/openstack-network/admin/content/connectivity.html



If I want to support floating IP, do I have to install L3 agent on 
controller/network node?


I would suggest having this on a network node. At the moment there is 
not support to run multiple L3 agents on compute nodes. We are currently 
working on a solution for this. Please note that there is no multi host 
support for Quantum at the moment.


Is it necessary to have a separate data and management network ? I am 
not expecting a lot of data crossing the network initially.


This is totally up to you. I would suggest having two different networks.



I am planning to use RHEL6.3, any thought about it.


RHEL6.3 could be supported by EPEL or through the preview at 
redhat.com/openstack




Thanks for any help.

Cheers
Kashif



___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp


___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Multinic issue (essex)

[Jesús Moreno]

Hi,

I followed this instructions:
http://docs.openstack.org/essex/openstack-compute/admin/content/using-multi-nics.html

As I had already created the networks (nova-manage network create), I just
had to modify one of them to attach the second network to this project
(nova-manage network modify). This way, every instance of this project gets
two IP addresses. As the images were created with one nic, after booting I
have to edit /etc/netwirk/interfaces in order to add the second interface.

Regards,
Jesús.

2013/1/24 Ajiva Fan aji.zq...@gmail.com

 hello
 I'm trying to use multi nics in essex, but it get an error:
 ERROR: NoNetworksFound: No networks defined. (HTTP 400)

 and this link https://bugs.launchpad.net/nova/+bug/953426 says that
 essex currently not enable specific nics. and i tried to use that
 patch in essex but failed.

 I'm wondering why you can launch an instance with single nic while
 another with two. Do you mind to tell me how you achieve that?

 thank you very much

 On 1/23/13, Jesús Moreno j.more...@gmail.com wrote:
  Hi,
 
  I'm trying to use multinic to create a scenario with two instances:
 Client
  (with one network interface) and Router (with two interfaces):
 
  Client(10.0.14.5)  (10.0.14.9)Router(10.0.2.9)
 
  I have modified the gateway in Client routing table, setting Router as
 the
  new gateway, and activated ip_forward in Router. However, when I ping
  10.0.2.9 from Client I get no reply. Capturing the traffic with tcpdump I
  have checked that  Router gets echo requests packets and that Router
 sends
  echo replys, but then they get lost somewhere, as I have captured the
  traffic in the computation nodes bridges and the echo reply packets don't
  appear. I guess that it could be a problem related with Vlans. Any ideas?
  Any help would be greatly appreciated.
 
  Regards,
  J. Moreno.
 

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

Re: [Openstack] Add NIC to running instance?

[Édouard Thuleau]

Hi,

I'm glad that you confirm my first impression about this blueprint :-) I'm
eager to help on this implementation, would you like me to rebase the
changes for you ? I can get to it right now.

Cheers,
Édouard.


On Wed, Jan 23, 2013 at 5:57 PM, heut2008 heut2...@gmail.com wrote:

 I think we can  obsoleted the quantum blueprint now, it can be implemented
 from  nova side and has no dependency to quantum any more,  and I'll update
 the code and resubmit the code  ASASP, hope it can be  accepted before
 grrizzly-3.


 2013/1/24 Édouard Thuleau thul...@gmail.com

 Hi all,

 I took a look to the Nova blueprint [1] and I noticed that it depends on
 a Quantum blueprint [2].
 This blueprint [2] was created April 2012. Quantum is now able to
 dynamically allocate ports and it's all Nova needs to implement this new
 feature.

 Can we obsoleted the Quantum blueprint [2] ?

 [1] https://blueprints.launchpad.net/nova/+spec/network-adapter-hotplug
 [2]
 https://blueprints.launchpad.net/quantum/+spec/nova-quantum-interface-creation

 Regards,
 Édouard.


 On Mon, Jan 14, 2013 at 6:18 PM, Vishvananda Ishaya 
 vishvana...@gmail.com wrote:

 This doesn't exist yet, but I thought at one point it was being worked
 on. Hot-adding nics would be a great feature for the quantum integration
 especially.

 Blueprint here:

 https://blueprints.launchpad.net/nova/+spec/network-adapter-hotplug

 There was work done here:

 https://review.openstack.org/#/c/11071/

 But it hasn't been touched for a while. Not sure what happened to it.

 Vish

 On Jan 14, 2013, at 8:00 AM, Wojciech Dec wdec.i...@gmail.com wrote:

  Hi All,
 
  is there a nova command to add a NIC to a running instance (ie without
 the need to do nova boot ... --nic 1 --nic new-nic) ?
 
  Documentation not showing up anything...
 
  Regards,
  W. Dec
  ___
  Mailing list: https://launchpad.net/~openstack
  Post to : openstack@lists.launchpad.net
  Unsubscribe : https://launchpad.net/~openstack
  More help   : https://help.launchpad.net/ListHelp


 ___
 Mailing list: https://launchpad.net/~openstack
 Post to : openstack@lists.launchpad.net
 Unsubscribe : https://launchpad.net/~openstack
 More help   : https://help.launchpad.net/ListHelp





 --
 Yaguang Tang

___
Mailing list: https://launchpad.net/~openstack
Post to : openstack@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: raring_grizzly_glance_trunk #96

[openstack-testing-bot]

Title: raring_grizzly_glance_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/raring_grizzly_glance_trunk/96/Project:raring_grizzly_glance_trunkDate of build:Wed, 23 Jan 2013 08:38:50 -0500Build duration:11 minBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesNo ChangesConsole Output[...truncated 6381 lines...]Space: 19828Status: attemptedVersion: 2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1Finished at 20130123-0850Build needed 00:08:57, 19828k disc spaceERROR:root:Error occurred during package creation/build: Command '['sbuild', '-d', 'raring-grizzly', '-n', '-A', 'glance_2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1.dsc']' returned non-zero exit status 2ERROR:root:Command '['sbuild', '-d', 'raring-grizzly', '-n', '-A', 'glance_2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1.dsc']' returned non-zero exit status 2INFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/glance/grizzly /tmp/tmpEvvTdD/glancemk-build-deps -i -r -t apt-get -y /tmp/tmpEvvTdD/glance/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log 26a13983b8cc3b0276b1115057585126443f0a02..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/glance/raring-grizzly --forcedch -b -D raring --newversion 2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1 Automated Ubuntu testing build:dch -a [21cf2cf] Update version code from oslodch -a [acae862] Avoid testtools 0.9.25dch -a [43f8697] Replace custom tearDown with fixtures and cleanup.dch -a [1aaacf9] Update version code from oslo.dch -a [b5e60b7] Use testtools for unittest base class.dch -a [8726801] Stub out find_file... fix policy.json test issue.dch -a [cf97f6f] Add import for filesystem_store_datadir config.dch -a [8b1c02a] Update v1/images DELETE so it returns empty body.dch -a [1522be7] Relax version constraint on Webob-1.0.8debcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC glance_2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1_source.changessbuild -d raring-grizzly -n -A glance_2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1.dscTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'raring-grizzly', '-n', '-A', 'glance_2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1.dsc']' returned non-zero exit status 2Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'raring-grizzly', '-n', '-A', 'glance_2013.1.2013.1.a21.g21cf2cf+git201301230838~raring-0ubuntu1.dsc']' returned non-zero exit status 2Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Fixed: precise_grizzly_glance_trunk #83

[openstack-testing-bot]

Title: precise_grizzly_glance_trunk
General InformationBUILD SUCCESSBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_glance_trunk/83/Project:precise_grizzly_glance_trunkDate of build:Wed, 23 Jan 2013 12:18:15 -0500Build duration:9 min 2 secBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: 4 out of the last 5 builds failed.20ChangesNo ChangesConsole Output[...truncated 7091 lines...]INFO:root:Installing build artifacts into /var/lib/jenkins/www/aptDEBUG:root:['reprepro', '--waitforlock', '10', '-Vb', '/var/lib/jenkins/www/apt', 'include', 'precise-grizzly', 'glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_amd64.changes']Skipping inclusion of 'glance-registry' '2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1' in 'precise-grizzly|main|amd64', as it has already '2013.1+git201301141901~precise-0ubuntu1'.Skipping inclusion of 'glance-api' '2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1' in 'precise-grizzly|main|amd64', as it has already '2013.1+git201301141901~precise-0ubuntu1'.Skipping inclusion of 'glance-common' '2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1' in 'precise-grizzly|main|amd64', as it has already '2013.1+git201301141901~precise-0ubuntu1'.Skipping inclusion of 'python-glance-doc' '2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1' in 'precise-grizzly|main|amd64', as it has already '2013.1+git201301141901~precise-0ubuntu1'.Skipping inclusion of 'glance' '2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1' in 'precise-grizzly|main|amd64', as it has already '2013.1+git201301141901~precise-0ubuntu1'.Skipping inclusion of 'python-glance' '2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1' in 'precise-grizzly|main|amd64', as it has already '2013.1+git201301141901~precise-0ubuntu1'.Deleting files just added to the pool but not used.(to avoid use --keepunusednewfiles next time)deleting and forgetting pool/main/g/glance/glance-api_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_all.debdeleting and forgetting pool/main/g/glance/glance-common_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_all.debdeleting and forgetting pool/main/g/glance/glance-registry_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_all.debdeleting and forgetting pool/main/g/glance/glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_all.debdeleting and forgetting pool/main/g/glance/python-glance-doc_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_all.debdeleting and forgetting pool/main/g/glance/python-glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_all.debINFO:root:Pushing changes back to bzr testing branchDEBUG:root:['bzr', 'push', 'lp:~openstack-ubuntu-testing/glance/precise-grizzly']Pushed up to revision 236.INFO:root:Storing current commit for next build: 21cf2cf39513d3f56a7e448e033f04de3a9fdc9fINFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/glance/grizzly /tmp/tmp17kSG2/glancemk-build-deps -i -r -t apt-get -y /tmp/tmp17kSG2/glance/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log 26a13983b8cc3b0276b1115057585126443f0a02..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/glance/precise-grizzly --forcedch -b -D precise --newversion 2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1 Automated Ubuntu testing build:dch -a [21cf2cf] Update version code from oslodch -a [acae862] Avoid testtools 0.9.25dch -a [43f8697] Replace custom tearDown with fixtures and cleanup.dch -a [1aaacf9] Update version code from oslo.dch -a [b5e60b7] Use testtools for unittest base class.dch -a [8726801] Stub out find_file... fix policy.json test issue.dch -a [cf97f6f] Add import for filesystem_store_datadir config.dch -a [8b1c02a] Update v1/images DELETE so it returns empty body.dch -a [1522be7] Relax version constraint on Webob-1.0.8debcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1.dscdput ppa:openstack-ubuntu-testing/grizzly-trunk-testing glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_source.changesreprepro --waitforlock 10 -Vb /var/lib/jenkins/www/apt include precise-grizzly glance_2013.1~2013.1.a21.g21cf2cf+git201301231218~precise-0ubuntu1_amd64.changesbzr push lp:~openstack-ubuntu-testing/glance/precise-grizzlyEmail was triggered for: FixedTrigger Success was overridden by another trigger and will not send an email.Sending email for trigger: Fixed-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : 

[Openstack-ubuntu-testing-notifications] Build Failure: precise_grizzly_quantum_trunk #226

[openstack-testing-bot]

Title: precise_grizzly_quantum_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_quantum_trunk/226/Project:precise_grizzly_quantum_trunkDate of build:Wed, 23 Jan 2013 14:01:09 -0500Build duration:27 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: 1 out of the last 5 builds failed.80ChangesNo ChangesConsole Output[...truncated 4 lines...]Last Built Revision: Revision 6f6499700a8ce682f9d0963180cbc389ac4acc85 (origin/master)Checkout:quantum / /var/lib/jenkins/slave/workspace/precise_grizzly_quantum_trunk/quantum - hudson.remoting.LocalChannel@5c0bd9afWiping out workspace first.Cloning the remote Git repositoryCloning repository originFetching upstream changes from https://github.com/openstack/quantum.gitERROR: Problem fetching from origin / origin - could be unavailable. Continuing anyway.hudson.plugins.git.GitException: Error performing command: git fetch -t https://github.com/openstack/quantum.git +refs/heads/*:refs/remotes/origin/*Command "git fetch -t https://github.com/openstack/quantum.git +refs/heads/*:refs/remotes/origin/*" returned status code 128: error: The requested URL returned error: 403 Forbidden while accessing https://github.com/openstack/quantum.git/info/refsfatal: HTTP request failed	at hudson.plugins.git.GitAPI.launchCommandIn(GitAPI.java:776)	at hudson.plugins.git.GitAPI.launchCommand(GitAPI.java:741)	at hudson.plugins.git.GitAPI.fetch(GitAPI.java:190)	at hudson.plugins.git.GitAPI.fetch(GitAPI.java:978)	at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:1049)	at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:970)	at hudson.FilePath$FileCallableWrapper.call(FilePath.java:2236)	at hudson.remoting.UserRequest.perform(UserRequest.java:118)	at hudson.remoting.UserRequest.perform(UserRequest.java:48)	at hudson.remoting.Request$2.run(Request.java:326)	at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72)	at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)	at java.util.concurrent.FutureTask.run(FutureTask.java:166)	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)	at hudson.remoting.Engine$1$1.run(Engine.java:60)	at java.lang.Thread.run(Thread.java:722)Caused by: hudson.plugins.git.GitException: Command "git fetch -t https://github.com/openstack/quantum.git +refs/heads/*:refs/remotes/origin/*" returned status code 128: error: The requested URL returned error: 403 Forbidden while accessing https://github.com/openstack/quantum.git/info/refsfatal: HTTP request failed	at hudson.plugins.git.GitAPI.launchCommandIn(GitAPI.java:771)	... 16 moreERROR: Could not fetch from any repositoryFATAL: Could not fetch from any repositoryhudson.plugins.git.GitException: Could not fetch from any repository	at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:1061)	at hudson.plugins.git.GitSCM$2.invoke(GitSCM.java:970)	at hudson.FilePath$FileCallableWrapper.call(FilePath.java:2236)	at hudson.remoting.UserRequest.perform(UserRequest.java:118)	at hudson.remoting.UserRequest.perform(UserRequest.java:48)	at hudson.remoting.Request$2.run(Request.java:326)	at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72)	at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)	at java.util.concurrent.FutureTask.run(FutureTask.java:166)	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)	at hudson.remoting.Engine$1$1.run(Engine.java:60)	at java.lang.Thread.run(Thread.java:722)-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_grizzly_nova_trunk #531

[openstack-testing-bot]

Title: precise_grizzly_nova_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_nova_trunk/531/Project:precise_grizzly_nova_trunkDate of build:Wed, 23 Jan 2013 14:05:55 -0500Build duration:6 min 19 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesMap libvirt error to InstanceNotFound in get_instance_disk_infoby hzwangpaneditnova/virt/libvirt/driver.pyeditnova/tests/test_libvirt.pyConsole Output[...truncated 11581 lines...]dch -a [a99ddf2] Fixed nova-manage argument parsing errordch -a [c8f0720] xenapi: Add cleanup_sm_locks scriptdch -a [5aec4bf] Make compare_result show the difference in listsdch -a [aa3686a] Don't limit SSH keys generation to 1024 bitsdch -a [3281850] Ensure service's servicegroup API is created first.dch -a [04f8dcf] Fix for typo in xml API doc sample in novadch -a [6560520] List servers having non-existent flavor should return empty listdch -a [86eabe4] Replace use of mkdtemp with fixtures.TempDirdch -a [84e5e69] Fix the wrong datatype in task_log table.dch -a [4a04aac] Cleanup of extract_opts.pydch -a [7c5b098] Use setup.py testr to run testr in run_tests.sh.dch -a [cc88380] Fix nova coverage.dch -a [f379db5] fix misspellings in logs, comments and testsdch -a [c538024] Allow snapshots of paused and suspended instancesdch -a [8d5891e] Sync latest cfg from oslo-incubatordch -a [6e3fcd5] Prevent metadata updates until instance is active.dch -a [485e4bd] Run_as_root to ensure resize2fs succeed for all image backendsdch -a [41848d4] XenAPI: Fix volume detachdch -a [abaef3b] Refactor: extract method: driver_dict_from_configdch -a [af5936f] Go back to the original branch after pylint checkdch -a [b87385b] Ignore auto-generated files by lintstackdch -a [e34d5d9] Add Compute API validations for block device mapdch -a [f7fbdeb] Fix state sync logic related to the PAUSED VM statedch -a [1f96a67] Tests for PXE bare-metal provisioning helper server.dch -a [67376d3] Map libvirt error to InstanceNotFound in get_instance_disk_infodch -a [f9bfc24] don't clear the database dicts in the tearDown methoddebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC nova_2013.1+git201301231406~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A nova_2013.1+git201301231406~precise-0ubuntu1.dscTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231406~precise-0ubuntu1.dsc']' returned non-zero exit status 2Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231406~precise-0ubuntu1.dsc']' returned non-zero exit status 2Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_folsom_cinder_stable #140

[openstack-testing-bot]

Title: precise_folsom_cinder_stable
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_folsom_cinder_stable/140/Project:precise_folsom_cinder_stableDate of build:Wed, 23 Jan 2013 14:14:43 -0500Build duration:1 min 29 secBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: 4 out of the last 5 builds failed.20ChangesNo ChangesConsole Output[...truncated 1264 lines...]hard linking tools/hacking.py -> cinder-2012.2.3/toolshard linking tools/install_venv.py -> cinder-2012.2.3/toolshard linking tools/pip-requires -> cinder-2012.2.3/toolshard linking tools/rfc.sh -> cinder-2012.2.3/toolshard linking tools/test-requires -> cinder-2012.2.3/toolshard linking tools/with_venv.sh -> cinder-2012.2.3/toolshard linking tools/conf/extract_opts.py -> cinder-2012.2.3/tools/confhard linking tools/conf/generate_sample.sh -> cinder-2012.2.3/tools/confcopying setup.cfg -> cinder-2012.2.3Writing cinder-2012.2.3/setup.cfgcreating distCreating tar archiveremoving 'cinder-2012.2.3' (and everything under it)INFO:root:Building package using /tmp/tmprnhyQz/cinder_2012.2.3+git201301231414~precise.orig.tar.gzINFO:root:Generating git changelog entries for this packageINFO:root:Detected previous commit - readingINFO:root:Merging testing branch from launchpadNot attempting to fix packaging branch ancestry, missing pristine tar data for version 2012.2.2+git201211300101~precise. M  debian/changelogText conflict in debian/changelog1 conflicts encountered.ERROR:root:Error occurred during package creation/build: Command '['bzr', 'merge', 'lp:~openstack-ubuntu-testing/cinder/precise-folsom', '--force']' returned non-zero exit status 1ERROR:root:Command '['bzr', 'merge', 'lp:~openstack-ubuntu-testing/cinder/precise-folsom', '--force']' returned non-zero exit status 1INFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/cinder/folsom /tmp/tmprnhyQz/cindermk-build-deps -i -r -t apt-get -y /tmp/tmprnhyQz/cinder/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log 87d839a5e569a8dc5f5cf6ae3403e35390f241dc..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/cinder/precise-folsom --forceTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['bzr', 'merge', 'lp:~openstack-ubuntu-testing/cinder/precise-folsom', '--force']' returned non-zero exit status 1Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['bzr', 'merge', 'lp:~openstack-ubuntu-testing/cinder/precise-folsom', '--force']' returned non-zero exit status 1Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_folsom_keystone_stable #85

[openstack-testing-bot]

Title: precise_folsom_keystone_stable
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_folsom_keystone_stable/85/Project:precise_folsom_keystone_stableDate of build:Wed, 23 Jan 2013 14:23:02 -0500Build duration:1 min 23 secBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesNo ChangesConsole Output[...truncated 1479 lines...]Hunk #5 succeeded at 444 (offset 28 lines).Hunk #6 succeeded at 508 (offset 28 lines).Hunk #7 succeeded at 628 (offset 28 lines).Hunk #8 succeeded at 643 (offset 28 lines).Hunk #9 succeeded at 676 (offset 28 lines).Hunk #10 succeeded at 686 (offset 28 lines).Hunk #11 succeeded at 782 (offset 28 lines).patching file tests/test_keystoneclient.pyHunk #2 FAILED at 784.1 out of 6 hunks FAILED -- rejects in file tests/test_keystoneclient.pyPatch fix-ubuntu-tests.patch does not apply (enforce with -f)ERROR:root:Error occurred during package creation/build: Command '['/usr/bin/schroot', '-r', '-c', 'precise-amd64-f770cfa6-bfa8-47ec-94fe-14d02cc82ad9', '-u', 'jenkins', '--', 'bzr', 'builddeb', '-S', '--', '-sa', '-us', '-uc']' returned non-zero exit status 3ERROR:root:Command '['/usr/bin/schroot', '-r', '-c', 'precise-amd64-f770cfa6-bfa8-47ec-94fe-14d02cc82ad9', '-u', 'jenkins', '--', 'bzr', 'builddeb', '-S', '--', '-sa', '-us', '-uc']' returned non-zero exit status 3INFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/keystone/folsom /tmp/tmp6iEfEe/keystonemk-build-deps -i -r -t apt-get -y /tmp/tmp6iEfEe/keystone/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log c387f84db41c325abb09ec547870e7f44e12cd90..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/keystone/precise-folsom --forcedch -b -D precise --newversion 2012.2.3+git201301231423~precise-0ubuntu1 Automated Ubuntu testing build:dch -a [ec7b94d] Render content-type appropriate 404 (bug 1089987)dch -a [9e300b7] Test 0.2.0 keystoneclient to avoid new depsdch -a [70e55f9] Fix catalog when services have no URLdch -a [6c95b73] Unparseable endpoint URL's should raise friendly errordch -a [ec06625] Ensure serviceCatalog is list when empty, not dictdebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['/usr/bin/schroot', '-r', '-c', 'precise-amd64-f770cfa6-bfa8-47ec-94fe-14d02cc82ad9', '-u', 'jenkins', '--', 'bzr', 'builddeb', '-S', '--', '-sa', '-us', '-uc']' returned non-zero exit status 3Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['/usr/bin/schroot', '-r', '-c', 'precise-amd64-f770cfa6-bfa8-47ec-94fe-14d02cc82ad9', '-u', 'jenkins', '--', 'bzr', 'builddeb', '-S', '--', '-sa', '-us', '-uc']' returned non-zero exit status 3Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Fixed: precise_grizzly_quantum_trunk #227

[openstack-testing-bot]

Title: precise_grizzly_quantum_trunk
General InformationBUILD SUCCESSBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_quantum_trunk/227/Project:precise_grizzly_quantum_trunkDate of build:Wed, 23 Jan 2013 14:31:08 -0500Build duration:8 min 33 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: 1 out of the last 5 builds failed.80ChangesLinuxBridge: update status according to admin_state_upby gkottoneditquantum/plugins/linuxbridge/lb_quantum_plugin.pyeditquantum/tests/unit/linuxbridge/test_lb_quantum_agent.pyeditquantum/plugins/linuxbridge/agent/linuxbridge_quantum_agent.pyeditquantum/tests/unit/linuxbridge/test_rpcapi.pyeditquantum/agent/rpc.pyConsole Output[...truncated 9610 lines...]  Uploading quantum_2013.1+git201301231431~precise-0ubuntu1.debian.tar.gz: done.  Uploading quantum_2013.1+git201301231431~precise-0ubuntu1_source.changes: done.Successfully uploaded packages.INFO:root:Installing build artifacts into /var/lib/jenkins/www/aptDEBUG:root:['reprepro', '--waitforlock', '10', '-Vb', '/var/lib/jenkins/www/apt', 'include', 'precise-grizzly', 'quantum_2013.1+git201301231431~precise-0ubuntu1_amd64.changes']Exporting indices...Successfully created '/var/lib/jenkins/www/apt/dists/precise-grizzly/Release.gpg.new'Successfully created '/var/lib/jenkins/www/apt/dists/precise-grizzly/InRelease.new'Deleting files no longer referenced...deleting and forgetting pool/main/q/quantum/python-quantum_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-common_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-dhcp-agent_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-l3-agent_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-cisco_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-linuxbridge-agent_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-linuxbridge_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-metaplugin_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-nec_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-nicira_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-openvswitch-agent_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-openvswitch_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-ryu-agent_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-plugin-ryu_2013.1+git201301231131~precise-0ubuntu1_all.debdeleting and forgetting pool/main/q/quantum/quantum-server_2013.1+git201301231131~precise-0ubuntu1_all.debINFO:root:Pushing changes back to bzr testing branchDEBUG:root:['bzr', 'push', 'lp:~openstack-ubuntu-testing/quantum/precise-grizzly']Pushed up to revision 123.INFO:root:Storing current commit for next build: 8f28b588618fc1ac24a84a86d8d485f8875d3709INFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/quantum/grizzly /tmp/tmpCo1fOl/quantummk-build-deps -i -r -t apt-get -y /tmp/tmpCo1fOl/quantum/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log 6f6499700a8ce682f9d0963180cbc389ac4acc85..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/quantum/precise-grizzly --forcedch -b -D precise --newversion 2013.1+git201301231431~precise-0ubuntu1 Automated Ubuntu testing build:dch -a [8f28b58] LinuxBridge: update status according to admin_state_updebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC quantum_2013.1+git201301231431~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A quantum_2013.1+git201301231431~precise-0ubuntu1.dscdput ppa:openstack-ubuntu-testing/grizzly-trunk-testing quantum_2013.1+git201301231431~precise-0ubuntu1_source.changesreprepro --waitforlock 10 -Vb /var/lib/jenkins/www/apt include precise-grizzly quantum_2013.1+git201301231431~precise-0ubuntu1_amd64.changesbzr push lp:~openstack-ubuntu-testing/quantum/precise-grizzlyEmail was triggered for: FixedTrigger Success was overridden by another trigger and will not send an email.Sending email for trigger: Fixed-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_grizzly_nova_trunk #532

[openstack-testing-bot]

Title: precise_grizzly_nova_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_nova_trunk/532/Project:precise_grizzly_nova_trunkDate of build:Wed, 23 Jan 2013 14:35:20 -0500Build duration:8 min 36 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesAdd ovs_interfaceid to nova network VIF modelby berrangeeditnova/tests/test_libvirt_vif.pyeditnova/tests/network/test_manager.pyeditnova/network/model.pyeditnova/virt/libvirt/vif.pyeditnova/network/quantumv2/api.pyMove helper APIs for OVS ports into linux_netby berrangeeditnova/virt/libvirt/vif.pyeditnova/network/linux_net.pyRemove duplicated tapdev creation code from libvirt VIFby berrangeeditnova/virt/libvirt/vif.pyeditnova/network/linux_net.pyAdd REST api to manage bare-metal nodesby notsuadddoc/api_samples/os-baremetal-nodes/baremetal-node-create-resp.xmleditnova/tests/integrated/api_samples/all_extensions/extensions-get-resp.json.tpladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-show-resp.json.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-remove-interface-req.xmleditnova/tests/fake_policy.pyaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-remove-interface-req.xml.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-create-resp.jsonadddoc/api_samples/os-baremetal-nodes/baremetal-node-remove-interface-req.jsonadddoc/api_samples/os-baremetal-nodes/baremetal-node-add-interface-resp.xmladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-add-interface-req.json.tpladdnova/tests/api/openstack/compute/contrib/test_baremetal_nodes.pyaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-list-resp.xml.tpladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-remove-interface-req.json.tpladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-add-interface-resp.xml.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-add-interface-resp.jsonaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-show-resp.xml.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-show-resp.jsonadddoc/api_samples/os-baremetal-nodes/baremetal-node-add-interface-req.xmleditdoc/api_samples/all_extensions/extensions-get-resp.jsonadddoc/api_samples/os-baremetal-nodes/baremetal-node-add-interface-req.jsonadddoc/api_samples/os-baremetal-nodes/baremetal-node-create-req.jsonaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-create-resp.json.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-list-resp.jsonaddnova/api/openstack/compute/contrib/baremetal_nodes.pyaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-create-req.xml.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-show-resp.xmladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-add-interface-req.xml.tpladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-create-req.json.tpleditnova/tests/integrated/test_api_samples.pyaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-add-interface-resp.json.tpleditdoc/api_samples/all_extensions/extensions-get-resp.xmleditetc/nova/policy.jsonaddnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-list-resp.json.tpladdnova/tests/integrated/api_samples/os-baremetal-nodes/baremetal-node-create-resp.xml.tpladddoc/api_samples/os-baremetal-nodes/baremetal-node-create-req.xmladddoc/api_samples/os-baremetal-nodes/baremetal-node-list-resp.xmleditnova/tests/integrated/api_samples/all_extensions/extensions-get-resp.xml.tplConsole Output[...truncated 11648 lines...]dch -a [aa3686a] Don't limit SSH keys generation to 1024 bitsdch -a [3281850] Ensure service's servicegroup API is created first.dch -a [04f8dcf] Fix for typo in xml API doc sample in novadch -a [6560520] List servers having non-existent flavor should return empty listdch -a [e35feaa] Remove duplicated tapdev creation code from libvirt VIFdch -a [e41f8be] Move helper APIs for OVS ports into linux_netdch -a [1c07735] Add 'ovs_interfaceid' to nova network VIF modeldch -a [86eabe4] Replace use of mkdtemp with fixtures.TempDirdch -a [84e5e69] Fix the wrong datatype in task_log table.dch -a [4a04aac] Cleanup of extract_opts.pydch -a [7c5b098] Use setup.py testr to run testr in run_tests.sh.dch -a [cc88380] Fix nova coverage.dch -a [f379db5] fix misspellings in logs, comments and testsdch -a [c538024] Allow snapshots of paused and suspended instancesdch -a [8d5891e] Sync latest cfg from oslo-incubatordch -a [6e3fcd5] Prevent metadata updates until instance is active.dch -a [485e4bd] Run_as_root to ensure resize2fs succeed for all image backendsdch -a [41848d4] XenAPI: Fix volume detachdch -a [abaef3b] Refactor: extract method: driver_dict_from_configdch -a [af5936f] Go back to the original branch after pylint checkdch -a [b87385b] Ignore auto-generated files by 

[Openstack-ubuntu-testing-notifications] Build Fixed: precise_folsom_keystone_stable #86

[openstack-testing-bot]

Title: precise_folsom_keystone_stable
General InformationBUILD SUCCESSBuild URL:https://jenkins.qa.ubuntu.com/job/precise_folsom_keystone_stable/86/Project:precise_folsom_keystone_stableDate of build:Wed, 23 Jan 2013 14:40:02 -0500Build duration:5 min 8 secBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: 4 out of the last 5 builds failed.20ChangesNo ChangesConsole Output[...truncated 5218 lines...]gpg: Good signature from "Openstack Ubuntu Testing Bot (Jenkins Key) "gpg: Signature made Wed Jan 23 14:41:45 2013 EST using RSA key ID 9935ACDCgpg: Good signature from "Openstack Ubuntu Testing Bot (Jenkins Key) "Checking signature on .changesGood signature on /tmp/tmpRA5Mz3/keystone_2012.2.3+git201301231440~precise-0ubuntu1_source.changes.Checking signature on .dscGood signature on /tmp/tmpRA5Mz3/keystone_2012.2.3+git201301231440~precise-0ubuntu1.dsc.Uploading to ppa (via ftp to ppa.launchpad.net):  Uploading keystone_2012.2.3+git201301231440~precise-0ubuntu1.dsc: done.  Uploading keystone_2012.2.3+git201301231440~precise.orig.tar.gz: done.  Uploading keystone_2012.2.3+git201301231440~precise-0ubuntu1.debian.tar.gz: done.  Uploading keystone_2012.2.3+git201301231440~precise-0ubuntu1_source.changes: done.Successfully uploaded packages.INFO:root:Installing build artifacts into /var/lib/jenkins/www/aptExporting indices...Successfully created '/var/lib/jenkins/www/apt/dists/precise-folsom/Release.gpg.new'Successfully created '/var/lib/jenkins/www/apt/dists/precise-folsom/InRelease.new'Deleting files no longer referenced...deleting and forgetting pool/main/k/keystone/keystone-doc_2012.2.3+git201212171831~precise-0ubuntu1_all.debdeleting and forgetting pool/main/k/keystone/keystone_2012.2.3+git201212171831~precise-0ubuntu1_all.debdeleting and forgetting pool/main/k/keystone/python-keystone_2012.2.3+git201212171831~precise-0ubuntu1_all.debINFO:root:Pushing changes back to bzr testing branchPushed up to revision 157.INFO:root:Storing current commit for next build: ec7b94d2ef008b716f4cc3d7c1fc7e8150858eebINFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/keystone/folsom /tmp/tmpRA5Mz3/keystonemk-build-deps -i -r -t apt-get -y /tmp/tmpRA5Mz3/keystone/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log c387f84db41c325abb09ec547870e7f44e12cd90..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/keystone/precise-folsom --forcedch -b -D precise --newversion 2012.2.3+git201301231440~precise-0ubuntu1 Automated Ubuntu testing build:dch -a [ec7b94d] Render content-type appropriate 404 (bug 1089987)dch -a [9e300b7] Test 0.2.0 keystoneclient to avoid new depsdch -a [70e55f9] Fix catalog when services have no URLdch -a [6c95b73] Unparseable endpoint URL's should raise friendly errordch -a [ec06625] Ensure serviceCatalog is list when empty, not dictdebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC keystone_2012.2.3+git201301231440~precise-0ubuntu1_source.changessbuild -d precise-folsom -n -A keystone_2012.2.3+git201301231440~precise-0ubuntu1.dscdput ppa:openstack-ubuntu-testing/folsom-stable-testing keystone_2012.2.3+git201301231440~precise-0ubuntu1_source.changesreprepro --waitforlock 10 -Vb /var/lib/jenkins/www/apt include precise-folsom keystone_2012.2.3+git201301231440~precise-0ubuntu1_amd64.changesbzr push lp:~openstack-ubuntu-testing/keystone/precise-folsomEmail was triggered for: FixedTrigger Success was overridden by another trigger and will not send an email.Sending email for trigger: Fixed-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Fixed: quantal_folsom_keystone_stable #98

[openstack-testing-bot]

Title: quantal_folsom_keystone_stable
General InformationBUILD SUCCESSBuild URL:https://jenkins.qa.ubuntu.com/job/quantal_folsom_keystone_stable/98/Project:quantal_folsom_keystone_stableDate of build:Wed, 23 Jan 2013 14:48:00 -0500Build duration:5 min 5 secBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: 4 out of the last 5 builds failed.20ChangesNo ChangesConsole Output[...truncated 5953 lines...]gpg: Good signature from "Openstack Ubuntu Testing Bot (Jenkins Key) "gpg: Signature made Wed Jan 23 14:50:09 2013 EST using RSA key ID 9935ACDCgpg: Good signature from "Openstack Ubuntu Testing Bot (Jenkins Key) "Checking signature on .changesGood signature on /tmp/tmpnsMTfY/keystone_2012.2.3+git201301231448~quantal-0ubuntu1_source.changes.Checking signature on .dscGood signature on /tmp/tmpnsMTfY/keystone_2012.2.3+git201301231448~quantal-0ubuntu1.dsc.Uploading to ppa (via ftp to ppa.launchpad.net):  Uploading keystone_2012.2.3+git201301231448~quantal-0ubuntu1.dsc: done.  Uploading keystone_2012.2.3+git201301231448~quantal.orig.tar.gz: done.  Uploading keystone_2012.2.3+git201301231448~quantal-0ubuntu1.debian.tar.gz: done.  Uploading keystone_2012.2.3+git201301231448~quantal-0ubuntu1_source.changes: done.Successfully uploaded packages.INFO:root:Installing build artifacts into /var/lib/jenkins/www/aptExporting indices...Successfully created '/var/lib/jenkins/www/apt/dists/quantal-folsom/Release.gpg.new'Successfully created '/var/lib/jenkins/www/apt/dists/quantal-folsom/InRelease.new'Deleting files no longer referenced...deleting and forgetting pool/main/k/keystone/keystone-doc_2012.2.3+git201212171832~quantal-0ubuntu1_all.debdeleting and forgetting pool/main/k/keystone/keystone_2012.2.3+git201212171832~quantal-0ubuntu1_all.debdeleting and forgetting pool/main/k/keystone/python-keystone_2012.2.3+git201212171832~quantal-0ubuntu1_all.debINFO:root:Pushing changes back to bzr testing branchPushed up to revision 157.INFO:root:Storing current commit for next build: ec7b94d2ef008b716f4cc3d7c1fc7e8150858eebINFO:root:Complete command log:INFO:root:Destroying schroot.bzr branch lp:~openstack-ubuntu-testing/keystone/folsom /tmp/tmpnsMTfY/keystonemk-build-deps -i -r -t apt-get -y /tmp/tmpnsMTfY/keystone/debian/controlpython setup.py sdistgit log -n1 --no-merges --pretty=format:%Hgit log c387f84db41c325abb09ec547870e7f44e12cd90..HEAD --no-merges --pretty=format:[%h] %sbzr merge lp:~openstack-ubuntu-testing/keystone/quantal-folsom --forcedch -b -D quantal --newversion 2012.2.3+git201301231448~quantal-0ubuntu1 Automated Ubuntu testing build:dch -a [ec7b94d] Render content-type appropriate 404 (bug 1089987)dch -a [9e300b7] Test 0.2.0 keystoneclient to avoid new depsdch -a [70e55f9] Fix catalog when services have no URLdch -a [6c95b73] Unparseable endpoint URL's should raise friendly errordch -a [ec06625] Ensure serviceCatalog is list when empty, not dictdebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC keystone_2012.2.3+git201301231448~quantal-0ubuntu1_source.changessbuild -d quantal-folsom -n -A keystone_2012.2.3+git201301231448~quantal-0ubuntu1.dscdput ppa:openstack-ubuntu-testing/folsom-stable-testing keystone_2012.2.3+git201301231448~quantal-0ubuntu1_source.changesreprepro --waitforlock 10 -Vb /var/lib/jenkins/www/apt include quantal-folsom keystone_2012.2.3+git201301231448~quantal-0ubuntu1_amd64.changesbzr push lp:~openstack-ubuntu-testing/keystone/quantal-folsomEmail was triggered for: FixedTrigger Success was overridden by another trigger and will not send an email.Sending email for trigger: Fixed-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_grizzly_nova_trunk #533

[openstack-testing-bot]

Title: precise_grizzly_nova_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_nova_trunk/533/Project:precise_grizzly_nova_trunkDate of build:Wed, 23 Jan 2013 15:31:14 -0500Build duration:7 min 4 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesBump the base rpc version of the network api to 1.7.by lauriaeditnova/network/manager.pyConsole Output[...truncated 11651 lines...]dch -a [aa3686a] Don't limit SSH keys generation to 1024 bitsdch -a [3281850] Ensure service's servicegroup API is created first.dch -a [04f8dcf] Fix for typo in xml API doc sample in novadch -a [6560520] List servers having non-existent flavor should return empty listdch -a [e35feaa] Remove duplicated tapdev creation code from libvirt VIFdch -a [e41f8be] Move helper APIs for OVS ports into linux_netdch -a [1c07735] Add 'ovs_interfaceid' to nova network VIF modeldch -a [86eabe4] Replace use of mkdtemp with fixtures.TempDirdch -a [84e5e69] Fix the wrong datatype in task_log table.dch -a [4a04aac] Cleanup of extract_opts.pydch -a [7c5b098] Use setup.py testr to run testr in run_tests.sh.dch -a [cc88380] Fix nova coverage.dch -a [f379db5] fix misspellings in logs, comments and testsdch -a [c538024] Allow snapshots of paused and suspended instancesdch -a [8d5891e] Sync latest cfg from oslo-incubatordch -a [6e3fcd5] Prevent metadata updates until instance is active.dch -a [485e4bd] Run_as_root to ensure resize2fs succeed for all image backendsdch -a [41848d4] XenAPI: Fix volume detachdch -a [abaef3b] Refactor: extract method: driver_dict_from_configdch -a [af5936f] Go back to the original branch after pylint checkdch -a [b87385b] Ignore auto-generated files by lintstackdch -a [e34d5d9] Add Compute API validations for block device mapdch -a [f7fbdeb] Fix state sync logic related to the PAUSED VM statedch -a [1f96a67] Tests for PXE bare-metal provisioning helper server.dch -a [67376d3] Map libvirt error to InstanceNotFound in get_instance_disk_infodch -a [f9bfc24] don't clear the database dicts in the tearDown methoddebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC nova_2013.1+git201301231532~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A nova_2013.1+git201301231532~precise-0ubuntu1.dscTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231532~precise-0ubuntu1.dsc']' returned non-zero exit status 2Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231532~precise-0ubuntu1.dsc']' returned non-zero exit status 2Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_grizzly_nova_trunk #534

[openstack-testing-bot]

Title: precise_grizzly_nova_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_nova_trunk/534/Project:precise_grizzly_nova_trunkDate of build:Wed, 23 Jan 2013 16:31:13 -0500Build duration:6 min 59 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesDont pass the entire list of instances to computeby vishvanandaeditnova/scheduler/filter_scheduler.pyConsole Output[...truncated 11654 lines...]dch -a [aa3686a] Don't limit SSH keys generation to 1024 bitsdch -a [3281850] Ensure service's servicegroup API is created first.dch -a [04f8dcf] Fix for typo in xml API doc sample in novadch -a [6560520] List servers having non-existent flavor should return empty listdch -a [e35feaa] Remove duplicated tapdev creation code from libvirt VIFdch -a [e41f8be] Move helper APIs for OVS ports into linux_netdch -a [1c07735] Add 'ovs_interfaceid' to nova network VIF modeldch -a [86eabe4] Replace use of mkdtemp with fixtures.TempDirdch -a [84e5e69] Fix the wrong datatype in task_log table.dch -a [4a04aac] Cleanup of extract_opts.pydch -a [7c5b098] Use setup.py testr to run testr in run_tests.sh.dch -a [cc88380] Fix nova coverage.dch -a [f379db5] fix misspellings in logs, comments and testsdch -a [c538024] Allow snapshots of paused and suspended instancesdch -a [8d5891e] Sync latest cfg from oslo-incubatordch -a [6e3fcd5] Prevent metadata updates until instance is active.dch -a [485e4bd] Run_as_root to ensure resize2fs succeed for all image backendsdch -a [41848d4] XenAPI: Fix volume detachdch -a [abaef3b] Refactor: extract method: driver_dict_from_configdch -a [af5936f] Go back to the original branch after pylint checkdch -a [b87385b] Ignore auto-generated files by lintstackdch -a [e34d5d9] Add Compute API validations for block device mapdch -a [f7fbdeb] Fix state sync logic related to the PAUSED VM statedch -a [1f96a67] Tests for PXE bare-metal provisioning helper server.dch -a [67376d3] Map libvirt error to InstanceNotFound in get_instance_disk_infodch -a [f9bfc24] don't clear the database dicts in the tearDown methoddebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC nova_2013.1+git201301231632~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A nova_2013.1+git201301231632~precise-0ubuntu1.dscTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231632~precise-0ubuntu1.dsc']' returned non-zero exit status 2Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231632~precise-0ubuntu1.dsc']' returned non-zero exit status 2Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Still Failing: precise_grizzly_nova_trunk #535

[openstack-testing-bot]

Title: precise_grizzly_nova_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_nova_trunk/535/Project:precise_grizzly_nova_trunkDate of build:Wed, 23 Jan 2013 17:22:58 -0500Build duration:6 min 12 secBuild cause:Started by user anonymousBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesNo ChangesConsole Output[...truncated 11654 lines...]dch -a [aa3686a] Don't limit SSH keys generation to 1024 bitsdch -a [3281850] Ensure service's servicegroup API is created first.dch -a [04f8dcf] Fix for typo in xml API doc sample in novadch -a [6560520] List servers having non-existent flavor should return empty listdch -a [e35feaa] Remove duplicated tapdev creation code from libvirt VIFdch -a [e41f8be] Move helper APIs for OVS ports into linux_netdch -a [1c07735] Add 'ovs_interfaceid' to nova network VIF modeldch -a [86eabe4] Replace use of mkdtemp with fixtures.TempDirdch -a [84e5e69] Fix the wrong datatype in task_log table.dch -a [4a04aac] Cleanup of extract_opts.pydch -a [7c5b098] Use setup.py testr to run testr in run_tests.sh.dch -a [cc88380] Fix nova coverage.dch -a [f379db5] fix misspellings in logs, comments and testsdch -a [c538024] Allow snapshots of paused and suspended instancesdch -a [8d5891e] Sync latest cfg from oslo-incubatordch -a [6e3fcd5] Prevent metadata updates until instance is active.dch -a [485e4bd] Run_as_root to ensure resize2fs succeed for all image backendsdch -a [41848d4] XenAPI: Fix volume detachdch -a [abaef3b] Refactor: extract method: driver_dict_from_configdch -a [af5936f] Go back to the original branch after pylint checkdch -a [b87385b] Ignore auto-generated files by lintstackdch -a [e34d5d9] Add Compute API validations for block device mapdch -a [f7fbdeb] Fix state sync logic related to the PAUSED VM statedch -a [1f96a67] Tests for PXE bare-metal provisioning helper server.dch -a [67376d3] Map libvirt error to InstanceNotFound in get_instance_disk_infodch -a [f9bfc24] don't clear the database dicts in the tearDown methoddebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC nova_2013.1+git201301231723~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A nova_2013.1+git201301231723~precise-0ubuntu1.dscTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231723~precise-0ubuntu1.dsc']' returned non-zero exit status 2Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301231723~precise-0ubuntu1.dsc']' returned non-zero exit status 2Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp

[Openstack-ubuntu-testing-notifications] Build Failure: precise_grizzly_nova_trunk #537

[openstack-testing-bot]

Title: precise_grizzly_nova_trunk
General InformationBUILD FAILUREBuild URL:https://jenkins.qa.ubuntu.com/job/precise_grizzly_nova_trunk/537/Project:precise_grizzly_nova_trunkDate of build:Wed, 23 Jan 2013 21:31:11 -0500Build duration:7 min 36 secBuild cause:Started by an SCM changeBuilt on:pkg-builderHealth ReportWDescriptionScoreBuild stability: All recent builds failed.0ChangesSkip backup files when running pep8.by rbtcollinseditrun_tests.shConsole Output[...truncated 11665 lines...]dch -a [aa3686a] Don't limit SSH keys generation to 1024 bitsdch -a [3281850] Ensure service's servicegroup API is created first.dch -a [04f8dcf] Fix for typo in xml API doc sample in novadch -a [6560520] List servers having non-existent flavor should return empty listdch -a [e35feaa] Remove duplicated tapdev creation code from libvirt VIFdch -a [e41f8be] Move helper APIs for OVS ports into linux_netdch -a [1c07735] Add 'ovs_interfaceid' to nova network VIF modeldch -a [86eabe4] Replace use of mkdtemp with fixtures.TempDirdch -a [84e5e69] Fix the wrong datatype in task_log table.dch -a [4a04aac] Cleanup of extract_opts.pydch -a [7c5b098] Use setup.py testr to run testr in run_tests.sh.dch -a [cc88380] Fix nova coverage.dch -a [f379db5] fix misspellings in logs, comments and testsdch -a [c538024] Allow snapshots of paused and suspended instancesdch -a [8d5891e] Sync latest cfg from oslo-incubatordch -a [6e3fcd5] Prevent metadata updates until instance is active.dch -a [485e4bd] Run_as_root to ensure resize2fs succeed for all image backendsdch -a [41848d4] XenAPI: Fix volume detachdch -a [abaef3b] Refactor: extract method: driver_dict_from_configdch -a [af5936f] Go back to the original branch after pylint checkdch -a [b87385b] Ignore auto-generated files by lintstackdch -a [e34d5d9] Add Compute API validations for block device mapdch -a [f7fbdeb] Fix state sync logic related to the PAUSED VM statedch -a [1f96a67] Tests for PXE bare-metal provisioning helper server.dch -a [67376d3] Map libvirt error to InstanceNotFound in get_instance_disk_infodch -a [f9bfc24] don't clear the database dicts in the tearDown methoddebcommitbzr builddeb -S -- -sa -us -ucbzr builddeb -S -- -sa -us -ucdebsign -k9935ACDC nova_2013.1+git201301232132~precise-0ubuntu1_source.changessbuild -d precise-grizzly -n -A nova_2013.1+git201301232132~precise-0ubuntu1.dscTraceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301232132~precise-0ubuntu1.dsc']' returned non-zero exit status 2Error in sys.excepthook:Traceback (most recent call last):  File "/usr/lib/python2.7/dist-packages/apport_python_hook.py", line 68, in apport_excepthookbinary = os.path.realpath(os.path.join(os.getcwd(), sys.argv[0]))OSError: [Errno 2] No such file or directoryOriginal exception was:Traceback (most recent call last):  File "/var/lib/jenkins/tools/openstack-ubuntu-testing/bin/build-package", line 141, in raise esubprocess.CalledProcessError: Command '['sbuild', '-d', 'precise-grizzly', '-n', '-A', 'nova_2013.1+git201301232132~precise-0ubuntu1.dsc']' returned non-zero exit status 2Build step 'Execute shell' marked build as failureEmail was triggered for: FailureSending email for trigger: Failure-- 
Mailing list: https://launchpad.net/~openstack-ubuntu-testing-notifications
Post to : openstack-ubuntu-testing-notifications@lists.launchpad.net
Unsubscribe : https://launchpad.net/~openstack-ubuntu-testing-notifications
More help   : https://help.launchpad.net/ListHelp