[Openstack] Trove is skipped in Newton

[Evgeniy Ivanov]

Hello everybody,

I found some interesting info about Trove in Newton. I'm able to deploy 
successfully some trove components (api, conductor and taskmanager) on 
my test Newton environment. As for the Trove guestagent - I'm totally 
not able to run it neither on Ubuntu Trusty nor Ubuntu Xenial.


I found there are no Newton packages for Trusty in The Ubuntu Cloud 
Archive. The last supported release is Mitaka (I checked the 
RELEASE_MAP). That looks there is no support for Newton in Trusty, 
therefore I can not use Trove in Newton.


As for the Xenial release, here is a bug where Amrith Kumar (CTO Tesora) 
says there is no support for Newton also - 
https://bugs.launchpad.net/trove/+bug/1652312 (Should be in Ocata only)


For me, it looks like Tesora just skipped Newton, did they?

I'm asking here because there is no way to get any answers from Tesora 
and Co.


Thanks for any help!

--
Best Regards,
Evgeniy Ivanov


___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Quota Exceeded when no Instances are running

[Georgios Dimitrakakis]

Hello,

I 've rebooted everything several times before posting here without 
success...



Any other ideas?

Best,

G.



You can try to reboot the node and see if it works. Some resources
might be locked at libvirt and kvm.

发自我的 iPhone


在 2017年3月7日，上午6:18，Georgios Dimitrakakis  写道：

All,

I am setting up a new Ocata installation and although no instances 
are running or at least not shown neither in Dashboard nor in CLI 
using the "nova list" command I am getting a "Quota Exceeded" error.


Why is this happening and how can I clean it up in order to continue 
using it?


The only thing that I can think of is that I 've tried to spawn 
several (maybe 10) instances that went in "Error" state with "No valid 
hosts found" error message. Apparently I 've delete the instances 
afterwards but maybe these instances are the ones that have hang-up.


Any help much appreciated!

All the best,

George

___
Mailing list: 
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Post to : openstack@lists.openstack.org
Unsubscribe : 
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack



___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] how to configure placement on my compute node

[Manuel Sopena Ballesteros]

Hi,

I tried to upgrade from newton to ocata yesterday and somehow I can't retrieve 
my instances from nova.

This is what I can see on the logs:

2017-03-07 15:50:52.842 36182 INFO nova.service [-] Starting compute node 
(version 15.0.0-1.el7)
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service [-] Error starting 
thread.
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service Traceback (most recent 
call last):
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service   File 
"/usr/lib/python2.7/site-packages/oslo_service/service.py", line 722, in 
run_service
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service service.start()
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service   File 
"/usr/lib/python2.7/site-packages/nova/service.py", line 144, in start
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service 
self.manager.init_host()
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service   File 
"/usr/lib/python2.7/site-packages/nova/compute/manager.py", line 1136, in 
init_host
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service raise 
exception.PlacementNotConfigured()
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service 
PlacementNotConfigured: This compute is not configured to talk to the placement 
service. Configure the [placement] section of nova.conf and restart the service.
2017-03-07 15:50:52.843 36182 ERROR oslo_service.service

I checked this website https://docs.openstack.org/developer/nova/placement.html 
but unfortunately I don't have the knowledge to understand what I need to do to 
setup placement on my nova node.

I was wondering if someone has a more detail set of instructions to fix this?

Thank you very much

Manuel Sopena Ballesteros | Big data Engineer
Garvan Institute of Medical Research
The Kinghorn Cancer Centre, 370 Victoria Street, Darlinghurst, NSW 2010
T: + 61 (0)2 9355 5760 | F: +61 (0)2 9295 8507 | E: 
manuel...@garvan.org.au

NOTICE
Please consider the environment before printing this email. This message and 
any attachments are intended for the addressee named and may contain legally 
privileged/confidential/copyright information. If you are not the intended 
recipient, you should not read, use, disclose, copy or distribute this 
communication. If you have received this message in error please notify us at 
once by return email and then delete both messages. We accept no liability for 
the distribution of viruses or similar in electronic communications. This 
notice should not be removed.
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Query Reg. Mirantis Community Version

[Raja T Nair]

Thanks Jay, for responding and correcting me.
Yes I meant Mirantis Fuel and openstack packages.

I am trying to implement Mirantis openstack in my infrastructure. Had a
query about monitoring the platform.
- Is it possible to use my existing monitoring setup(nagios, cacti) to
monitor the Mirantis nodes?

Best Regards,
Raja.


On Monday, 6 March 2017, Jay Pipes  wrote:

> On 03/06/2017 06:05 AM, Raja T Nair wrote:
>
>> Hi,
>>
>> Can I ask queries about Mirantis community version on this list?
>> If not, can somebody point to an appropriate link?
>>
>
> Hi Raja,
>
> There's no such thing as Mirantis Community version. Are you referring to
> OpenStack Fuel? Perhaps the Mirantis OpenStack packages? Something else
> entirely?
>
> Please elaborate :)
>
> Best,
> -jay
>
> ___
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstac
> k
> Post to : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstac
> k
>


-- 
:^)
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] I cannot unsubscribe mail list

[hanchao]

Hi,


Similar issue that I suffered, too. 


I wished to login to my openstack account, but the password did not match. 
Then I tried the "forgot password", it said will send me a link to reset my 
password.
However since then, I never received any emails for that. 
I even send emails to ask about the problem to "i...@openstack.org", but still 
nothing changed.
My account is still not available for me. It is sad...


Hope the system is working well, and wish our issues can be addressed soon.


Regards,
Chao


-原始邮件-
发件人: "庄才家" 
发送时间: 2017年3月7日 星期二
收件人: openstack 
抄送:
主题: [Openstack] I cannot unsubscribe mail list


Hi:
 
I want to unsubscribe list, after I click the Unsubscribe button,I have not 
receive the confirmation message by email.
 
Pls help me.
 
 
By clicking on the Unsubscribe button, a confirmation message will be emailed 
to you. This message will have a link that you should click on to complete the 
removal process (you can also confirm by email; see the instructions in the 
confirmation message).
 
 
庄才家 Caijia Zhuang
Senior Technical Professor
+86-13923707546
zhuangcai...@unitedstack.com
UNITEDSTACK（北京）科技有限公司
北京市海淀区中关村软件园4号楼软件广场C座102,100193
Room 302,Block C,Building.4,Zhongguancun Software park,100193 Haidian Dist.China
 




___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] [Docs] How to find old version openstack installation docs?

[Sam]

Hi, all

Q1:
I fork from neutron of mitaka version, and I do some additional code on
this. Then I want to install my DIY neutron into openstack.

I don't know if other part of openstack like nova I used must be some old
version? If it is, how could I find installation guaid of old version?


Q2:
I only have ubuntu1404, I want to install openstack, how could I find this
installation guaid of ubuntu1404?


Thanks.
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] I cannot unsubscribe mail list

[庄才家]

Hi:

I want to unsubscribe list, after I click the Unsubscribe button,I have not 
receive the confirmation message by email.

Pls help me.


By clicking on the Unsubscribe button, a confirmation message will be emailed 
to you. This message will have a link that you should click on to complete the 
removal process (you can also confirm by email; see the instructions in the 
confirmation message).





庄才家 Caijia Zhuang
Senior Technical Professor
+86-13923707546
zhuangcai...@unitedstack.com
UNITEDSTACK（北京）科技有限公司
北京市海淀区中关村软件园4号楼软件广场C座102,100193
Room 302,Block C,Building.4,Zhongguancun Software park,100193 Haidian Dist.China___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] [openstack-dev] [kolla][keystone] better way to rotate and distribution keystone fernet keys in container env

[Jeffrey Zhang]

On Tue, Mar 7, 2017 at 2:09 AM, Matt Fischer  wrote:

> I don't think it would cause an issue if every controller rotated all at
> once. The issues are more along the lines of rotating to key C when there
> are tokens out there that are encrypted with keys A and B. In other words
> over-rotation. As long as your keys are properly staged, do the rotation
> all at once or space them out, should not make any difference.
>

​The issue is "at once".
It takes some time to rotate and distribute the keys. There is one case
that.
controller A and controller B generate a new different keys. Then they copy
the ​key to other by using rsync.

A: 0 1 2 3
B: 0' 1' 2 3

When distributing, the 0/0' and 1/1' may be overrode(rsync hold the delete
file handler and copy it to other one). it will lead to

A: 0' 1' 2 3
B: 0 1 2 3

next rotation, it may become

A: 0' 1' 2' 3
B: 0 1 2 3

after distribute , it become

A: 0 1 2 3
B: 0' 1' 2' 3

Next rotation and distribute, issue happen.

This is a small probability， but it still possible.


-- 
Regards,
Jeffrey Zhang
Blog: http://xcodest.me
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Quota Exceeded when no Instances are running

[张华]

You can try to reboot the node and see if it works. Some resources might be 
locked at libvirt and kvm.

发自我的 iPhone

> 在 2017年3月7日，上午6:18，Georgios Dimitrakakis  写道：
> 
> All,
> 
> I am setting up a new Ocata installation and although no instances are 
> running or at least not shown neither in Dashboard nor in CLI using the "nova 
> list" command I am getting a "Quota Exceeded" error.
> 
> Why is this happening and how can I clean it up in order to continue using it?
> 
> The only thing that I can think of is that I 've tried to spawn several 
> (maybe 10) instances that went in "Error" state with "No valid hosts found" 
> error message. Apparently I 've delete the instances afterwards but maybe 
> these instances are the ones that have hang-up.
> 
> Any help much appreciated!
> 
> All the best,
> 
> George
> 
> ___
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Quota Exceeded when no Instances are running

[Georgios Dimitrakakis]

All,

I am setting up a new Ocata installation and although no instances are 
running or at least not shown neither in Dashboard nor in CLI using the 
"nova list" command I am getting a "Quota Exceeded" error.


Why is this happening and how can I clean it up in order to continue 
using it?


The only thing that I can think of is that I 've tried to spawn several 
(maybe 10) instances that went in "Error" state with "No valid hosts 
found" error message. Apparently I 've delete the instances afterwards 
but maybe these instances are the ones that have hang-up.


Any help much appreciated!

All the best,

George

___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Compute Node asks for [placement] section

[Georgios Dimitrakakis]

I 've followed the changes in the aforementioned bug report a few days 
ago (meaning that I 've created the DB and changed the CONF files) and I 
was able to launch Cirros instances.
I will be more than happy to provide the steps to someone to look at 
them if requested.


Unfortunately I am not able to launch neither Debian nor CentOS 
instances and I am getting a "No valid host was found".


Not sure if this is really the same bug but how can I eliminate the 
option?


Regards,

G.


Reading the initial bug report here:
https://bugs.launchpad.net/openstack-manuals/+bug/1663485
as well as the proposed fix here: 
https://review.openstack.org/#/c/438328

and the Cells documentation here:
https://docs.openstack.org/developer/nova/cells.html#cells-v2

my understanding is that I need to have at least one extra DB in
order for Cells to work before issuing the command to setup cells.

Is my understanding correct?
Has anybody else overcome this obstacle?

Best regards,

George


Nope, the db will be synced when you issue the cell creation, just
like in the case of nova sync.

The only req is that you need to have all computes up when creating
the cell.

On 2 Mar 2017 23:46, "Georgios Dimitrakakis"  wrote:


Thanks for the feedback, but I am assuming that this by itself is
not enough.
I guess I should have created the DB before.
Any other actions that must be done before that?

Best,

George


To add cells you need to issue the following command after nova
service-list lists all your compute nodes as up state!

nova-manage cell_v2 simple_cell_setup --transport-url
$transport_url

Where






$transport_url=rabbit://{rabbit_user}:{rabbit_pass}@{rabbit_host}:{rabbit_port}


This command will populate the db and add a transport_url option
in
nova.conf on the controller.

Again, you need to issue this command after all computes node
show as
up state in nova service-list, otherwise you will still be unable
to
spawn instances.

I might have written the command wrong from the top of my head,
but
issue a nova-manage help cell_v2 to see the appropiate option.

I am mailing you directly because for some reason i am unable to
send
to thr mailing list.

When you reply to the mailing list olease put this mail in it so
others can see it too if they have the same problem.

Thanks,
Mihai

On 2 Mar 2017 20:00, "Georgios Dimitrakakis"  wrote:


It seems that I wont be able to spawn an image even if this is
working for now...

As you have pointed out there is also this bug:
https://bugs.launchpad.net/openstack-manuals/+bug/1663485 [1]
[17]

that will not allow me to spawn an image until the Cells have
been
configured properly.

So I am looking for a permanent solution...

Best,

G.

On Thu, 02 Mar 2017 10:56:19 +0200, Georgios Dimitrakakis
wrote:


Mihai, I am putting the list here as well...

No I didnt add the [placement] section in nova.conf on the
controller but adding it only on the compute node brought it
online.

I dont know yet if I can spawn an instance and if what you
are
saying is mandatory in Ocata in order to spawn one since I
havent
reached that part of the installation guide. The verification
though
of the compute services went OK as supposed to by the
installation
guide.

Best,

George


Hi, 

Did you also add the [placement] section in nova.conf on
the
controller?

Also in Ocata AFAIK you also need to create cell_v2 with
nova-manage
or else you wont be able to spawn instances.

But first add the placement section on the controller too
in
nova.conf
and the computes shoukd come online.

On 2 Mar 2017 09:27, "Georgios Dimitrakakis"  wrote:


On 03/01/2017 05:13 PM, Georgios Dimitrakakis wrote:


All,

I am trying to deploy OpenStack Ocata on bare metal
servers
using the official
guide from here:







https://docs.openstack.org/ocata/install-guide-rdo/nova-compute-install.html

[19]


[6]


[1]

Unfortunately I have stuck at deploying the Compute
Node
due to
the following
error in the logs when I try to start nova-compute
service:

2017-03-02 00:27:16.052 4236 INFO nova.service [-]
Starting
compute node
(version 15.0.0-1.el7)
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service
[-]
Error starting thread.
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service
Traceback (most recent
call last):
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service 
 File





"/usr/lib/python2.7/site-packages/oslo_service/service.py",



line 722, in
run_service
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service
service.start()
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service 
 File
"/usr/lib/python2.7/site-packages/nova/service.py",
line
144,
in start
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service
self.manager.init_host()
2017-03-02 00:27:16.053 4236 ERROR
oslo_service.service 
 File





"/usr/lib/python2.7/site-packages/nova/compute/manager.py",


Hi Chris,

it is constantly printing this output in the log and also
prevents
the openstack-nova-compute.service
from being shown as Active (running) when doi

Re: [Openstack] Integrating Ceph Jewel as Storage Backend for OpenStack Newton

[Evan Bollig PhD]

Hey Esteban,
I got that same error at one point. Check your file permissions on the
/etc/ceph directory and contents. In particular, make sure the glance
user can access its keyring and the ceph.conf is readable for the
group as well. Here's an example:

drwxr-xr-x.  2 rootroot4.0K Jan 17 12:25 .
drwxr-xr-x. 93 rootroot8.0K Mar  3 14:27 ..
-rw---.  1 rootroot  63 Jan 11 14:00 ceph.client.admin.keyring
-rw---.  1 cinder  cinder71 Jan 11 13:59
ceph.client.cinder-backup.keyring
-r+  1 cinder  cinder64 Jan 11 13:59 ceph.client.cinder.keyring
-rw---.  1 glance  glance64 Jan 11 13:59 ceph.client.glance.keyring
-r+  1 gnocchi gnocchi   65 Jan 17 12:25 ceph.client.gnocchi.keyring
-rw-r--r--.  1 rootroot 220 Jan 11 13:59 ceph.conf

Let me know how things in Newton are working; we're only as far as
Mitaka at the moment.

Cheers,
-E


--
Evan F. Bollig, PhD
Scientific Computing Consultant, Application Developer | Scientific
Computing Solutions (SCS)
Minnesota Supercomputing Institute | msi.umn.edu
University of Minnesota | umn.edu
boll0...@umn.edu | 612-624-1447 | Walter Lib Rm 556


On Thu, Mar 2, 2017 at 3:13 AM, Esteban Freire  wrote:
> Hello all,
>
> I am testing OpenStack Newton on CentOS 7 and now I already have a OpenStack
> cloud infrastructure working, I would like to integrate Ceph with Cinder,
> Glance and Nova services.
>
> I have found some information about how to performance this on previous
> releases for Openstack and Ceph:
>
> http://docs.ceph.com/docs/jewel/rbd/rbd-openstack/
>
> And I tried to update the variables according to
> https://docs.openstack.org/newton/config-reference/block-storage/drivers/ceph-rbd-volume-driver.html
>
> This is my current glance-api.conf and which is working:
>
> [glance_store]
> stores = file,http
> default_store = file
> filesystem_store_datadir = /var/lib/glance/images/
>
>
> At this is what I tried (at the moment, I have only tried it with the glance
> service but I did not get success):
>
> * Install python-rbd and python-rados from centos-ceph-jewel repo on the
> controller node.
> * Create a ceph user and add it to sudoers.
> * On ceph admin node:
>
> sudo ceph osd pool create images 150
> sudo ceph auth get-or-create client.glance mon 'allow r' osd 'allow
> class-read object_prefix rbd_children, allow rwx pool=images'
> sudo ceph auth get-or-create client.glance | ssh
> ceph@controller-node1 sudo tee /etc/ceph/ceph.client.glance.keyring
> ssh ceph@controller-node1 sudo chown glance:glance
> /etc/ceph/ceph.client.glance.keyring
>
> * On the controller node, I edited the glance-api.conf file with the
> following variables:
>
> [glance_store]
> stores = file,http,rbd
> default_store = rbd
> rbd_pool = images
> rbd_user = glance
> rbd_ceph_conf = /etc/ceph/ceph.conf
> rbd_store_chunk_size = 8
>
> (!) I also have tried with stores = rbd but without success.
>
> * And restart the service, systemctl restart openstack-glance-api
>
> But when I try to create a new image, I get the following issue:
>
> [openstackadmin@controller-node1 ~]$ openstack image create "cirros
> ceph" --file /home/openstackadmin/cirros-0.3.4-x86_64-disk.raw --disk-format
> raw --container-format bare --public
> 500 Internal Server Error
> The server has either erred or is incapable of performing the requested
> operation.
> (HTTP 500)
>
> Is there any documentation about how to integrate Ceph jewel with OpenStack
> newton (Cinder, Glance and Nova services)? If it is so, could you please
> provide me the link?
>
> On the other hand, Is there any way to chose the store when creating an
> image? I mean, to choose for example if save the image on
> /var/lib/glance/images/ or on Ceph.
>
> I would appreciate if you could help me to set up this integration.
>
> This is the most relevant info I can see on the logs and as far as I see
> from it, I have a permissions error but I am not sure what I need to modify.
> It is my first installation with OpenStack by the way and I am trying at
> home to see how it works :)
>
> {{{
> /var/log/glance/api.log
>
> 2017-03-01 23:43:41.419 4197 INFO eventlet.wsgi.server
> [req-eea55909-c963-4158-b30c-3f2779fd78c6 c41043a1ddc14ffba1b45c0a3287e0bf
> b2d1547f0e734f87a84feea75ccd6453 - default default] 192.168.56.2 - -
> [01/Mar/2017 23:43:41] "GET /v2/schemas/image HTTP/1.1" 200 4352 0.421281
> 2017-03-01 23:43:41.570 4197 INFO eventlet.wsgi.server
> [req-f5ef0b43-0ddf-4698-8459-2f75fb1822a3 c41043a1ddc14ffba1b45c0a3287e0bf
> b2d1547f0e734f87a84feea75ccd6453 - default default] 192.168.56.2 - -
> [01/Mar/2017 23:43:41] "POST /v2/images HTTP/1.1" 201 859 0.110681
> 2017-03-01 23:43:41.651 4197 ERROR glance.api.v2.image_data
> [req-98c406fb-7bc0-47de-bace-2b0a2097b699 c41043a1ddc14ffba1b45c0a3287e0bf
> b2d1547f0e734f87a84feea75ccd6453 - default defau

[Openstack] [openstack] [keystone] how to configure multiple object-store entries with different endpoints

[Peter Brouwer]

Hi

How do you setup different object stores for a different set of users, 
like oversimplified example, presales users go to different object store 
as users from postsales?


I get the a mix of two endpoints showing up under one user, only way to 
get the groups is using different region but user still get endpoints 
for both.



openstack role list
+--+-+
| ID   | Name|
+--+-+
| 3af2ab60862c4f85a3139aa7a4ecb297 | admin   |
| 7209bcb5362845589f1fb80fc02d91e8 | swift_users |
| 87a552a90bda418a891fc4ae31ef5e68 | user|
+--+-+

root@ubuntu1:~/scripts# openstack user list
+--+---+
| ID   | Name  |
+--+---+
| 2d5f98a58ebb4aeeae8112000f24c9ee | admin |
| 32597a8cde2f43e780c10a317041aaad | swift |
| 77d906e5efee455e939a6f8d5bac0812 | demo  |
| a524fb94470d450191a8e446ed4b3ddd | bob   |
+--+---+
root@ubuntu1:~/scripts# openstack user show bob
++--+
| Field  | Value|
++--+
| default_project_id | 8e698265b04549d0980e918c87738d86 |
| description| AfterSales member|
| domain_id  | default  |
| email  | bob@aftersales.local |
| enabled| True |
| id | a524fb94470d450191a8e446ed4b3ddd |
| name   | bob  |
++--+
openstack project show service
+-+--+
| Field   | Value|
+-+--+
| description | Default service project  |
| domain_id   | default  |
| enabled | True |
| id  | 51ded72073e340b2a2f99cb344dc2bad |
| is_domain   | False|
| name| service  |
| parent_id   | default  |
+-+--+
root@ubuntu1:~/scripts# openstack project show aftersales
+-+--+
| Field   | Value|
+-+--+
| description |  |
| domain_id   | default  |
| enabled | True |
| id  | 8e698265b04549d0980e918c87738d86 |
| is_domain   | False|
| name| aftersales   |
| parent_id   | default  |
+-+--+

 openstack catalog show aftersales
+---++
| Field | Value  |
+---++
| endpoints | RegionTwo  |
|   |   internal: http://192.168.0.210/v1/aftersales |
|   | RegionTwo  |
|   |   admin: http://192.168.0.210/v1/aftersales|
|   | RegionTwo  |
|   |   public: http://192.168.0.210/v1/aftersales   |
|   ||
| id| 9c825bf5c2d947448bc9e834e820b647   |
| name  | aftersales |
| type  | object-store   |
+---++

r catalog show swift
+---+--+
| Field | Value|
+---+--+
| endpoints | RegionOne|
|   |   public: http://192.168.0.200/v1/export/kswift   |
|   | RegionOne|
|   |   internal: http://192.168.0.200/v1/export/kswift |
|   | RegionOne|
|   |   admin: http://192.168.0.200/v1/export/kswift|
| |  |
| id| af8477214a834d959abd3f0718dd88fb |
| name  | swift|
| type  | object-store |
+---+--+

root@ubuntu1:~/scripts# openstack endpoint list
+

Re: [Openstack] Query Reg. Mirantis Community Version

[Jay Pipes]

On 03/06/2017 06:05 AM, Raja T Nair wrote:

Hi,

Can I ask queries about Mirantis community version on this list?
If not, can somebody point to an appropriate link?


Hi Raja,

There's no such thing as Mirantis Community version. Are you referring 
to OpenStack Fuel? Perhaps the Mirantis OpenStack packages? Something 
else entirely?


Please elaborate :)

Best,
-jay

___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] lbaasv2: tempest tests relate to "empty/invalid" tenant ids fails

[Talluri S S R]

Hi
When I'm running neutron tempest api v2 tests . There is issue 
with all Admin user test-cases for creating resource with "empty/invalid" 
tenant ids are failing with backend driver (say NetScaler) there is validation 
for resource attributes and it raises BadRequest which is translated as "Driver 
Internal Error" at Plugin Layer."
I'm still facing the same issue  : 
https://lists.launchpad.net/yahoo-eng-team/msg32397.html
Is there a fix for this ?

Any help will be greatly appreciated.

Thanks and Regards
Rohith.

___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Query Reg. Mirantis Community Version

[Raja T Nair]

Hi,

Can I ask queries about Mirantis community version on this list?
If not, can somebody point to an appropriate link?

Regards,
Raja.

-- 
:^)
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack