Re: [Openstack] Error when installing RDO

[Wilson Kwok]

I install RDO with 30mins.

10 students some 40mins, some 1hr.
2016/3/5 上午12:48 於 "James Denton"  寫道：

> I use a consistent, known working answers file and from time to time
> Puppet will bomb out on some operation. Simply rerunning Packstack will, in
> most cases, result in a working installation on the next run. Sometimes it
> takes three runs, but it gets there.  This is using CentOS 7.1 inside a
> VirtualBox virtual machine and the RDO Liberty repo. I have about a 90-95%
> success rate on the first run.
>
> James
>
>
> From: Wilson Kwok 
> Date: Thursday, March 3, 2016 at 11:38 PM
> To: Adam Young 
> Cc: Openstack 
> Subject: Re: [Openstack] Error when installing RDO
>
> Sorry, we deleted those VMs already, we were using packstack allinall for
> Single Node training.
> 2016/3/4 下午1:34 於 "Adam Young"  寫道：
>
>> On 03/03/2016 09:57 PM, Wilson Kwok wrote:
>>
>> Hello all,
>>
>> I am teaching RDO with 10 students, when they start to installing RDO,
>> half student can't finish installation, after re-run the RDO can finish.
>>
>> I was tested in VMware Workstation 11.0 with this problem, I was thinking
>> may be VMware Workstation or physical servers problem, so I changed to
>> use ravellosystems to install RDO, but also half students can't install RDO.
>>
>> Thank
>>
>>
>> ___
>> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
>>
>> If you are using current Tripleo, the default host sizes are too small.
>> I am running with 8 GM for the underclopud and 6 for controller and compute
>> nodes.
>>
>> Try:
>> export NODE_MEM=6144
>> Before running instack-virt-setup
>>
>>
>>
>> ___
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Error when installing RDO

[Wilson Kwok]

Sorry, we deleted those VMs already, we were using packstack allinall for
Single Node training.
2016/3/4 下午1:34 於 "Adam Young"  寫道：

> On 03/03/2016 09:57 PM, Wilson Kwok wrote:
>
> Hello all,
>
> I am teaching RDO with 10 students, when they start to installing RDO,
> half student can't finish installation, after re-run the RDO can finish.
>
> I was tested in VMware Workstation 11.0 with this problem, I was thinking
> may be VMware Workstation or physical servers problem, so I changed to
> use ravellosystems to install RDO, but also half students can't install RDO.
>
> Thank
>
>
> ___
> Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
>
> If you are using current Tripleo, the default host sizes are too small.  I
> am running with 8 GM for the underclopud and 6 for controller and compute
> nodes.
>
> Try:
> export NODE_MEM=6144
> Before running instack-virt-setup
>
>
>
> ___
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Error when installing RDO

[Wilson Kwok]

I have installed RDO successfully anytime, but they are not.

The error fail at different parts and we are using CentOS 7.

Different students facing.

2016-03-04 11:13 GMT+08:00 Shinobu Kinjo :

> Did exactly half of students face error every time?
> Why don't you use kvm?
> Anyhow answer and log files may be helpful, I guess.
>
> Cheers,
> Shinobu
>
> On Fri, Mar 4, 2016 at 11:57 AM, Wilson Kwok  wrote:
> > Hello all,
> >
> > I am teaching RDO with 10 students, when they start to installing RDO,
> half
> > student can't finish installation, after re-run the RDO can finish.
> >
> > I was tested in VMware Workstation 11.0 with this problem, I was thinking
> > may be VMware Workstation or physical servers problem, so I changed to
> use
> > ravellosystems to install RDO, but also half students can't install RDO.
> >
> > Thank
> >
> > ___
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack@lists.openstack.org
> > Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
>
>
> --
> Email:
> shin...@linux.com
> GitHub:
> shinobu-x
> Blog:
> Life with Distributed Computational System based on OpenSource
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Error when installing RDO

[Wilson Kwok]

Hello all,

I am teaching RDO with 10 students, when they start to installing RDO, half
student can't finish installation, after re-run the RDO can finish.

I was tested in VMware Workstation 11.0 with this problem, I was thinking
may be VMware Workstation or physical servers problem, so I changed to
use ravellosystems to install RDO, but also half students can't install RDO.

Thank
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Unable to retrieve volume limit information.

[Wilson Kwok]

I just tried below Cinder keystone auth not work with my fresh RDO
installation, why?


auth_uri = http://keystone_ip:5000
auth_url = http://keystone_ip:35357
auth_plugin = password
project_domain_id = default
user_domain_id = default
project_name = services
username = cinder
password = [cinder password]

2016-02-19 18:30 GMT+08:00 Wilson Kwok :

> Thank for your information, the Cinder.conf no keystone auth ...
>
> auth_uri = http://keystone_ip:5000
> auth_url = http://keystone_ip:35357
> auth_plugin = password
> project_domain_id = default
> user_domain_id = default
> project_name = services
> username = cinder
> password = [cinder password]
>
>
> 2016-02-19 2:08 GMT+08:00 Mohammed Naser :
>
>> I believe you’re running into this issue:
>>
>> https://bugzilla.redhat.com/show_bug.cgi?id=1272572
>>
>> On Thu, Feb 18, 2016 at 12:31 PM, Wilson Kwok  wrote:
>> > Hello,
>> >
>> > After fresh installed RDO single node in Ravello System platform, I
>> created
>> > one m1.tiny instance, but the status is running with Unable to retrieve
>> > volume limit information error, can somebody help?
>> >
>> > Thanks
>> >
>> > ___
>> > Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> > Post to : openstack@lists.openstack.org
>> > Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> >
>>
>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Unable to retrieve volume limit information.

[Wilson Kwok]

Thank for your information, the Cinder.conf no keystone auth ...

auth_uri = http://keystone_ip:5000
auth_url = http://keystone_ip:35357
auth_plugin = password
project_domain_id = default
user_domain_id = default
project_name = services
username = cinder
password = [cinder password]


2016-02-19 2:08 GMT+08:00 Mohammed Naser :

> I believe you’re running into this issue:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1272572
>
> On Thu, Feb 18, 2016 at 12:31 PM, Wilson Kwok  wrote:
> > Hello,
> >
> > After fresh installed RDO single node in Ravello System platform, I
> created
> > one m1.tiny instance, but the status is running with Unable to retrieve
> > volume limit information error, can somebody help?
> >
> > Thanks
> >
> > ___
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack@lists.openstack.org
> > Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Unable to retrieve volume limit information.

[Wilson Kwok]

Hello,

After fresh installed RDO single node in Ravello System platform
, I created one m1.tiny instance, but the
status is running with Unable to retrieve volume limit information error,
can somebody help?

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Can't access Horizon from outside

[Wilson Kwok]

Hello,

I used RDO to installed single node. I can access
http://private_ip/dashboard in local LAN, when I access
http://public_ip/dashboard that not allowed, remember I can access
http://public_ip that can see the Apache testing page.

I have checked local_settings file > ALLOWED_HOSTS = ['*', ] , what I can
do now?

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Why asking me a lot of questions when installing RDO ?

[Wilson Kwok]

Hi Christian,

Yes, I'm using packstack --allinone for installation, your command will
avoid them ?

Thanks

2015-08-10 16:37 GMT+08:00 Christian Berendt :

> On 08/09/2015 05:25 PM, Wilson Kwok wrote:
> > Is it new version ? can I avoid them ?
>
> Are you using Packstack?
>
> packstack --gen-answer-file=ANSWER_FILE
> packstack --answer-file=ANSWER_FILE
>
> HTH, Christian.
>
> --
> Christian Berendt
> Cloud Solution Architect
> Mail: bere...@b1-systems.de
>
> B1 Systems GmbH
> Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de
> GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537
>
> ___
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Why asking me a lot of questions when installing RDO ?

[Wilson Kwok]

Hello,

Is it new version ? can I avoid them ?

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Hello all,

Is this bug fixed?

Thanks

2015-05-24 11:37 GMT+08:00 Wilson Kwok :

> Yes, still having problem.
>
> 2015-05-22 3:04 GMT+08:00 Matthias Runge :
>
>> On 21/05/15 11:56, Salman Khan wrote:
>>
>>> Hi Matthias,
>>>
>>> I still have to clear the cache whenever session expires. Its still not
>>> fixed.
>>>
>>> [root@ctr-rdo-kilo #] rpm -q python-django-openstack-auth
>>> python-django-openstack-auth-1.2.0-2.el7.noarch
>>>
>>>
>> Yes, I'm sorry. I realized this yesterday in the afternoon. There is a
>> fix for this out there,  the bugzilla number for this is
>> https://bugzilla.redhat.com/show_bug.cgi?id=1218894
>>
>> and it should be synced to the repository shortly (if it's not already).
>>
>> Matthias
>>
>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't upload image form dashboard.

[Wilson Kwok]

Hello all,

Is this bug fixed ?

Thanks

2015-05-24 14:29 GMT+08:00 Wilson Kwok :

> Consentry?
> 於 2015/5/24 下午12:16，"Kilaru, Srikanth (NFV PLM)" 
> 寫道：
>
>>  Is this Wilson I used to work with at Consentry and who used to be at
>> Cisco?
>>
>> Srikanth
>>
>>
>> On May 23, 2015, at 20:45, Wilson Kwok  wrote:
>>
>>   Hi Tom,
>>
>>  It is held on Queued status ... thanks for your information.
>>
>> 2015-05-23 22:20 GMT+08:00 Tom Verdaat :
>>
>>> If you're using the Kilo edition of Horizon you might be facing this
>>> bug: https://bugs.launchpad.net/horizon/+bug/1451429
>>>
>>>
>>>
>>>  2015-05-23 14:52 GMT+02:00 Wilson Kwok :
>>>
>>>>  Hello,
>>>>
>>>>  I'm used RDO installer to completed single node installation, I can
>>>> use glance command to upload image from this link:
>>>> https://cloud-images.ubuntu.com/releases/12.04.2/release/ubuntu-12.04-server-cloudimg-amd64-disk1.img
>>>>
>>>>  Thanks
>>>>
>>>>  ___
>>>> Mailing list:
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>> Post to : openstack@lists.openstack.org
>>>> Unsubscribe :
>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>
>>>>
>>>
>>   ___
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Hi James,

1. Yes
2. Internal instance can ping router internal gateway.
3. Were can check it?
4. Yes
5. Can't ping to outside

Thanks

2015-06-06 8:25 GMT+08:00 James Denton :

>  Hi Wilson,
>
>  Can you clarify a couple of things here?
>
>  - Does each tenant have their own router in front of their respective
> instance?
>
>  - have you confirmed connectivity to the admin instance from the router
> namespace?
>
>  - can you verify the dnat/snat entries for the admin instance exist in
> iptables in the router namespace?
>
>  - have you verified the instance got its fixed up from dhcp?
>
>  - have you tried consoling to the instance and verifying outbound
> connectivity?
>
>  If you can, start with some simple connectivity verifications with the
> namespaces and work your way out from there. Also, your screenshots didn't
> come through, so if you can post the Cli output somewhere that would be
> helpful.
>
>  James
>
> Sent from my iPhone
>
> On Jun 4, 2015, at 10:18 PM, Wilson Kwok  wrote:
>
>   Any one can help?
> 於 2015/5/29 上午10:39，"Wilson Kwok"  寫道：
>
>> Ok
>> 於 2015/5/28 下午6:24，"Remo Mattei"  寫道：
>>
>>>  Nope.
>>>
>>> Inviato da iPhone
>>>
>>> Il giorno 28/mag/2015, alle ore 02:04, Wilson Kwok 
>>> ha scritto:
>>>
>>>   Hello all,
>>>
>>> Have some see my attached screenshots?
>>>
>>> Thanks
>>> 於 2015/5/27 上午11:14，"Wilson Kwok"  寫道：
>>>
>>>> Hello all,
>>>>
>>>>  Please see attached Zip screenshots, you will know what is my problem.
>>>>
>>>>  Thanks for your help!
>>>>
>>>> 2015-05-27 1:15 GMT+08:00 Remo Mattei :
>>>>
>>>>> Just a quick note, each tenant has it’s own default security group
>>>>> rules. So I would double check and make sure your admin does have those
>>>>> rules set. If it works with Demo it has to work with admin.
>>>>>
>>>>>  Remo
>>>>>
>>>>>  On May 26, 2015, at 09:03, Wilson Kwok  wrote:
>>>>>
>>>>>  Hi Yair,
>>>>>
>>>>>  I just tried something:
>>>>>
>>>>>  1. I created Peter account and added into Demo project, I can access
>>>>> Peter's VM from external network PC via floating IP.
>>>>>  2. Admin account router account floating IP is 172.28.0.163, I can
>>>>> ping it, but I can't access Admin's VM floating IP 172.128.0.164 from
>>>>> external network PC (Securty Group allow ICMP and SSH)
>>>>>  3. Demo account with no problem.
>>>>>
>>>>>  I created public network with keystone admin, please see below result
>>>>> with neutron net-show public:
>>>>>
>>>>>  [root@localhost ~(keystone_admin)]# neutron net-show public
>>>>> +---+--+
>>>>> | Field | Value|
>>>>> +---+--+
>>>>> | admin_state_up| True |
>>>>> | id| 6145669e-4688-40a6-b878-aaa2f9cb26c6 |
>>>>> | mtu   | 0|
>>>>> | name  | public   |
>>>>> | provider:network_type | vxlan|
>>>>> | provider:physical_network |  |
>>>>> | provider:segmentation_id  | 10   |
>>>>> | router:external   | True |
>>>>> | shared| True |
>>>>> | status| ACTIVE   |
>>>>> | subnets   | 65c1896c-0bc6-4b00-b89b-57f2677b3219 |
>>>>> | tenant_id | e67ef147ee074f83bdab0da903f0cdd3 |
>>>>> +---+--+
>>>>>  and keystone tenant-list command:
>>>>>
>>>>>  [root@localhost ~(keystone_admin)]# keystone tenant-list
>>>>> /usr/lib/python2.7/site-packages/keystoneclient/shell.py:65:
>>>>> DeprecationWarning: The keystone CLI is deprecated in favor of
>>&g

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Any one can help?
於 2015/5/29 上午10:39，"Wilson Kwok"  寫道：

> Ok
> 於 2015/5/28 下午6:24，"Remo Mattei"  寫道：
>
>> Nope.
>>
>> Inviato da iPhone
>>
>> Il giorno 28/mag/2015, alle ore 02:04, Wilson Kwok 
>> ha scritto:
>>
>> Hello all,
>>
>> Have some see my attached screenshots?
>>
>> Thanks
>> 於 2015/5/27 上午11:14，"Wilson Kwok"  寫道：
>>
>>> Hello all,
>>>
>>> Please see attached Zip screenshots, you will know what is my problem.
>>>
>>> Thanks for your help!
>>>
>>> 2015-05-27 1:15 GMT+08:00 Remo Mattei :
>>>
>>>> Just a quick note, each tenant has it’s own default security group
>>>> rules. So I would double check and make sure your admin does have those
>>>> rules set. If it works with Demo it has to work with admin.
>>>>
>>>> Remo
>>>>
>>>> On May 26, 2015, at 09:03, Wilson Kwok  wrote:
>>>>
>>>> Hi Yair,
>>>>
>>>> I just tried something:
>>>>
>>>> 1. I created Peter account and added into Demo project, I can access
>>>> Peter's VM from external network PC via floating IP.
>>>> 2. Admin account router account floating IP is 172.28.0.163, I can ping
>>>> it, but I can't access Admin's VM floating IP 172.128.0.164 from external
>>>> network PC (Securty Group allow ICMP and SSH)
>>>> 3. Demo account with no problem.
>>>>
>>>> I created public network with keystone admin, please see below result
>>>> with neutron net-show public:
>>>>
>>>> [root@localhost ~(keystone_admin)]# neutron net-show public
>>>> +---+--+
>>>> | Field | Value|
>>>> +---+--+
>>>> | admin_state_up| True |
>>>> | id| 6145669e-4688-40a6-b878-aaa2f9cb26c6 |
>>>> | mtu   | 0|
>>>> | name  | public   |
>>>> | provider:network_type | vxlan|
>>>> | provider:physical_network |  |
>>>> | provider:segmentation_id  | 10   |
>>>> | router:external   | True |
>>>> | shared| True |
>>>> | status| ACTIVE   |
>>>> | subnets   | 65c1896c-0bc6-4b00-b89b-57f2677b3219 |
>>>> | tenant_id | e67ef147ee074f83bdab0da903f0cdd3 |
>>>> +---+--+
>>>> and keystone tenant-list command:
>>>>
>>>> [root@localhost ~(keystone_admin)]# keystone tenant-list
>>>> /usr/lib/python2.7/site-packages/keystoneclient/shell.py:65:
>>>> DeprecationWarning: The keystone CLI is deprecated in favor of
>>>> python-openstackclient. For a Python library, continue using
>>>> python-keystoneclient.
>>>>   'python-keystoneclient.', DeprecationWarning)
>>>> +--+--+-+
>>>> |id|   name   | enabled |
>>>> +--+--+-+
>>>> | e67ef147ee074f83bdab0da903f0cdd3 |  admin   |   True  |
>>>> | 24f9a6c52a1d471a8e7dc0f8fde32ced |   demo   |   True  |
>>>> | 64c18def585e45e39b5e4ec161e18633 | services |   True  |
>>>> | 80f0de3f19bf4c699938b54288d1ede8 |   test   |   True  |
>>>> +--+--+-+
>>>> Thanks for your help!
>>>>
>>>>
>>>> 2015-05-26 18:32 GMT+08:00 Yair Fried :
>>>>
>>>>> Hi,
>>>>> From https://bugzilla.redhat.com/show_bug.cgi?id=1163726#c3
>>>>>
>>>>> 
>>>>> By marking a network as "external" you are actually sharing it among
>>>>> all other tenants to be used as default GW and a source for floating IPs.
>>>>>
>>>>> Marking a network as "shared" is allowing other tenants to connect VMs
>>>&

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Ok
於 2015/5/28 下午6:24，"Remo Mattei"  寫道：

> Nope.
>
> Inviato da iPhone
>
> Il giorno 28/mag/2015, alle ore 02:04, Wilson Kwok  ha
> scritto:
>
> Hello all,
>
> Have some see my attached screenshots?
>
> Thanks
> 於 2015/5/27 上午11:14，"Wilson Kwok"  寫道：
>
>> Hello all,
>>
>> Please see attached Zip screenshots, you will know what is my problem.
>>
>> Thanks for your help!
>>
>> 2015-05-27 1:15 GMT+08:00 Remo Mattei :
>>
>>> Just a quick note, each tenant has it’s own default security group
>>> rules. So I would double check and make sure your admin does have those
>>> rules set. If it works with Demo it has to work with admin.
>>>
>>> Remo
>>>
>>> On May 26, 2015, at 09:03, Wilson Kwok  wrote:
>>>
>>> Hi Yair,
>>>
>>> I just tried something:
>>>
>>> 1. I created Peter account and added into Demo project, I can access
>>> Peter's VM from external network PC via floating IP.
>>> 2. Admin account router account floating IP is 172.28.0.163, I can ping
>>> it, but I can't access Admin's VM floating IP 172.128.0.164 from external
>>> network PC (Securty Group allow ICMP and SSH)
>>> 3. Demo account with no problem.
>>>
>>> I created public network with keystone admin, please see below result
>>> with neutron net-show public:
>>>
>>> [root@localhost ~(keystone_admin)]# neutron net-show public
>>> +---+--+
>>> | Field | Value|
>>> +---+--+
>>> | admin_state_up| True |
>>> | id| 6145669e-4688-40a6-b878-aaa2f9cb26c6 |
>>> | mtu   | 0|
>>> | name  | public   |
>>> | provider:network_type | vxlan|
>>> | provider:physical_network |  |
>>> | provider:segmentation_id  | 10   |
>>> | router:external   | True |
>>> | shared| True |
>>> | status| ACTIVE   |
>>> | subnets   | 65c1896c-0bc6-4b00-b89b-57f2677b3219 |
>>> | tenant_id | e67ef147ee074f83bdab0da903f0cdd3 |
>>> +---+--+
>>> and keystone tenant-list command:
>>>
>>> [root@localhost ~(keystone_admin)]# keystone tenant-list
>>> /usr/lib/python2.7/site-packages/keystoneclient/shell.py:65:
>>> DeprecationWarning: The keystone CLI is deprecated in favor of
>>> python-openstackclient. For a Python library, continue using
>>> python-keystoneclient.
>>>   'python-keystoneclient.', DeprecationWarning)
>>> +--+--+-+
>>> |id|   name   | enabled |
>>> +--+--+-+
>>> | e67ef147ee074f83bdab0da903f0cdd3 |  admin   |   True  |
>>> | 24f9a6c52a1d471a8e7dc0f8fde32ced |   demo   |   True  |
>>> | 64c18def585e45e39b5e4ec161e18633 | services |   True  |
>>> | 80f0de3f19bf4c699938b54288d1ede8 |   test   |   True  |
>>> +--+--+-+
>>> Thanks for your help!
>>>
>>>
>>> 2015-05-26 18:32 GMT+08:00 Yair Fried :
>>>
>>>> Hi,
>>>> From https://bugzilla.redhat.com/show_bug.cgi?id=1163726#c3
>>>>
>>>> 
>>>> By marking a network as "external" you are actually sharing it among
>>>> all other tenants to be used as default GW and a source for floating IPs.
>>>>
>>>> Marking a network as "shared" is allowing other tenants to connect VMs
>>>> (and not router GWs) directly to the network.
>>>>
>>>> Marking an external network as "shared" would allow VMs of all tenants
>>>> to connect to a network as well as pull floating ips from it (via router
>>>> GW). While this is possible in Neutron, it is also redundant, as with the
>>>> case above - There isn't much sense in pulling a floating IP from a network

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Hello all,

Have some see my attached screenshots?

Thanks
於 2015/5/27 上午11:14，"Wilson Kwok"  寫道：

> Hello all,
>
> Please see attached Zip screenshots, you will know what is my problem.
>
> Thanks for your help!
>
> 2015-05-27 1:15 GMT+08:00 Remo Mattei :
>
>> Just a quick note, each tenant has it’s own default security group rules.
>> So I would double check and make sure your admin does have those rules set.
>> If it works with Demo it has to work with admin.
>>
>> Remo
>>
>> On May 26, 2015, at 09:03, Wilson Kwok  wrote:
>>
>> Hi Yair,
>>
>> I just tried something:
>>
>> 1. I created Peter account and added into Demo project, I can access
>> Peter's VM from external network PC via floating IP.
>> 2. Admin account router account floating IP is 172.28.0.163, I can ping
>> it, but I can't access Admin's VM floating IP 172.128.0.164 from external
>> network PC (Securty Group allow ICMP and SSH)
>> 3. Demo account with no problem.
>>
>> I created public network with keystone admin, please see below result
>> with neutron net-show public:
>>
>> [root@localhost ~(keystone_admin)]# neutron net-show public
>> +---+--+
>> | Field | Value|
>> +---+--+
>> | admin_state_up| True |
>> | id| 6145669e-4688-40a6-b878-aaa2f9cb26c6 |
>> | mtu   | 0|
>> | name  | public   |
>> | provider:network_type | vxlan|
>> | provider:physical_network |  |
>> | provider:segmentation_id  | 10   |
>> | router:external   | True |
>> | shared| True |
>> | status| ACTIVE   |
>> | subnets   | 65c1896c-0bc6-4b00-b89b-57f2677b3219 |
>> | tenant_id | e67ef147ee074f83bdab0da903f0cdd3 |
>> +---+--+
>> and keystone tenant-list command:
>>
>> [root@localhost ~(keystone_admin)]# keystone tenant-list
>> /usr/lib/python2.7/site-packages/keystoneclient/shell.py:65:
>> DeprecationWarning: The keystone CLI is deprecated in favor of
>> python-openstackclient. For a Python library, continue using
>> python-keystoneclient.
>>   'python-keystoneclient.', DeprecationWarning)
>> +--+--+-+
>> |id|   name   | enabled |
>> +--+--+-+
>> | e67ef147ee074f83bdab0da903f0cdd3 |  admin   |   True  |
>> | 24f9a6c52a1d471a8e7dc0f8fde32ced |   demo   |   True  |
>> | 64c18def585e45e39b5e4ec161e18633 | services |   True  |
>> | 80f0de3f19bf4c699938b54288d1ede8 |   test   |   True  |
>> +--+--+-+
>> Thanks for your help!
>>
>>
>> 2015-05-26 18:32 GMT+08:00 Yair Fried :
>>
>>> Hi,
>>> From https://bugzilla.redhat.com/show_bug.cgi?id=1163726#c3
>>>
>>> 
>>> By marking a network as "external" you are actually sharing it among all
>>> other tenants to be used as default GW and a source for floating IPs.
>>>
>>> Marking a network as "shared" is allowing other tenants to connect VMs
>>> (and not router GWs) directly to the network.
>>>
>>> Marking an external network as "shared" would allow VMs of all tenants
>>> to connect to a network as well as pull floating ips from it (via router
>>> GW). While this is possible in Neutron, it is also redundant, as with the
>>> case above - There isn't much sense in pulling a floating IP from a network
>>> that you can connect to directly.
>>> 
>>>
>>> please provide the relevant output from:
>>> $ neutron net-show 
>>> $ keystone tenant-list
>>>
>>> Without this output it seems like the network was created by non-admin
>>> tenant/user which shouldn't allow its floating IPs to be consumed by other
>>> tenants. I've never tried to do that, so I'm not sure if this is a
>>> legitimate op

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Hi Yair,

I just tried something:

1. I created Peter account and added into Demo project, I can access
Peter's VM from external network PC via floating IP.
2. Admin account router account floating IP is 172.28.0.163, I can ping it,
but I can't access Admin's VM floating IP 172.128.0.164 from external
network PC (Securty Group allow ICMP and SSH)
3. Demo account with no problem.

I created public network with keystone admin, please see below result with
neutron net-show public:

[root@localhost ~(keystone_admin)]# neutron net-show public
+---+--+
| Field | Value|
+---+--+
| admin_state_up| True |
| id| 6145669e-4688-40a6-b878-aaa2f9cb26c6 |
| mtu   | 0|
| name  | public   |
| provider:network_type | vxlan|
| provider:physical_network |  |
| provider:segmentation_id  | 10   |
| router:external   | True |
| shared| True |
| status| ACTIVE   |
| subnets   | 65c1896c-0bc6-4b00-b89b-57f2677b3219 |
| tenant_id | e67ef147ee074f83bdab0da903f0cdd3 |
+---+--+
and keystone tenant-list command:

[root@localhost ~(keystone_admin)]# keystone tenant-list
/usr/lib/python2.7/site-packages/keystoneclient/shell.py:65:
DeprecationWarning: The keystone CLI is deprecated in favor of
python-openstackclient. For a Python library, continue using
python-keystoneclient.
  'python-keystoneclient.', DeprecationWarning)
+--+--+-+
|id|   name   | enabled |
+--+--+-+
| e67ef147ee074f83bdab0da903f0cdd3 |  admin   |   True  |
| 24f9a6c52a1d471a8e7dc0f8fde32ced |   demo   |   True  |
| 64c18def585e45e39b5e4ec161e18633 | services |   True  |
| 80f0de3f19bf4c699938b54288d1ede8 |   test   |   True  |
+--+--+-+
Thanks for your help!


2015-05-26 18:32 GMT+08:00 Yair Fried :

> Hi,
> From https://bugzilla.redhat.com/show_bug.cgi?id=1163726#c3
>
> 
> By marking a network as "external" you are actually sharing it among all
> other tenants to be used as default GW and a source for floating IPs.
>
> Marking a network as "shared" is allowing other tenants to connect VMs
> (and not router GWs) directly to the network.
>
> Marking an external network as "shared" would allow VMs of all tenants to
> connect to a network as well as pull floating ips from it (via router GW).
> While this is possible in Neutron, it is also redundant, as with the case
> above - There isn't much sense in pulling a floating IP from a network that
> you can connect to directly.
> 
>
> please provide the relevant output from:
> $ neutron net-show 
> $ keystone tenant-list
>
> Without this output it seems like the network was created by non-admin
> tenant/user which shouldn't allow its floating IPs to be consumed by other
> tenants. I've never tried to do that, so I'm not sure if this is a
> legitimate operation and if so, how such network should behave.
>
> The ideal flow is:
> 1. Admin creates an external network (usually called "public") in its own
> tenant.
> 2. Users (in their own tenants) create private networks and VMs attached
> to them.
> 3. Users create routers connecting their private networks (
> router-interface-add") to the external ("public") network
> ("router-gateway-set").
> *** At this point, VMs should be able to access the outside world via NAT.
> 4. Now users can allocate floating IPs to their VMs (only those VMs that
> are connected to the external network via routers).
>
> Please let me know if this is unclear
> Regards
> Yair
>
>
> - Original Message -
> From: "Wilson Kwok" 
> To: "Yair Fried" 
> Cc: openstack@lists.openstack.org
> Sent: Tuesday, May 26, 2015 1:00:58 PM
> Subject: Re: [Openstack] Confusion of external network
>
> Hi Yair,
>
> 1. The new account same project with demo account.
> 2. Yes, the external network shared already, so how can share this network
> if not use it for floating IP?
>
> Thanks
>
> 2015-05-26 13:58 GMT+08:00 Yair Fried :
>
> > Hi,
> > Yo

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Hi Yair,

1. The new account same project with demo account.
2. Yes, the external network shared already, so how can share this network
if not use it for floating IP?

Thanks

2015-05-26 13:58 GMT+08:00 Yair Fried :

> Hi,
> Your question is missing some details
> 1. What tenant does the network belong to?
> 2. Is it shared? If you want to use it for floating IP it shouldn't be
> shared. And VMs shouldn't be connected directly to it.
>
> Regards,
> Yair
>
> - Original Message -
> From: "Wilson Kwok" 
> To: openstack@lists.openstack.org
> Sent: Tuesday, May 26, 2015 4:38:20 AM
> Subject: Re: [Openstack] Confusion of external network
>
> Can someone help ? thanks!
>
> 2015-05-24 11:51 GMT+08:00 Wilson Kwok < leiw...@gmail.com > :
>
>
>
> Hello all,
>
> I have completed my Openstack via this RDO guideline:
> http://community.redhat.com/blog/2015/01/rdo-quickstart-doing-the-neutron-dance/
>
> This guideline help to fix external network that can let my home network
> can access to instance via floating IP, but needed to use neutron command
> to remove default external network and then add new external network that
> subnet match my home network.
>
> The new external network shared already, my confusion is why only demo
> account of external network can access instance, but admin account cannot,
> even I create anther user account with same of demo project.
>
> Anyone have been try RDO caused this problem ?
>
> Thanks
>
>
> ___
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Confusion of external network

[Wilson Kwok]

Can someone help ? thanks!

2015-05-24 11:51 GMT+08:00 Wilson Kwok :

> Hello all,
>
> I have completed my Openstack via this RDO guideline:
> http://community.redhat.com/blog/2015/01/rdo-quickstart-doing-the-neutron-dance/
>
> This guideline help to fix external network that can let my home network
> can access to instance via floating IP, but needed to use neutron command
> to remove default external network and then add new external network that
> subnet match my home network.
>
> The new external network shared already, my confusion is why only demo
> account of external network can access instance, but admin account cannot,
> even I create anther user account with same of demo project.
>
> Anyone have been try RDO caused this problem ?
>
> Thanks
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Confusion of external network

[Wilson Kwok]

Hello all,

I have completed my Openstack via this RDO guideline:
http://community.redhat.com/blog/2015/01/rdo-quickstart-doing-the-neutron-dance/

This guideline help to fix external network that can let my home network
can access to instance via floating IP, but needed to use neutron command
to remove default external network and then add new external network that
subnet match my home network.

The new external network shared already, my confusion is why only demo
account of external network can access instance, but admin account cannot,
even I create anther user account with same of demo project.

Anyone have been try RDO caused this problem ?

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Yes, still having problem.

2015-05-22 3:04 GMT+08:00 Matthias Runge :

> On 21/05/15 11:56, Salman Khan wrote:
>
>> Hi Matthias,
>>
>> I still have to clear the cache whenever session expires. Its still not
>> fixed.
>>
>> [root@ctr-rdo-kilo #] rpm -q python-django-openstack-auth
>> python-django-openstack-auth-1.2.0-2.el7.noarch
>>
>>
> Yes, I'm sorry. I realized this yesterday in the afternoon. There is a fix
> for this out there,  the bugzilla number for this is
> https://bugzilla.redhat.com/show_bug.cgi?id=1218894
>
> and it should be synced to the repository shortly (if it's not already).
>
> Matthias
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't upload image form dashboard.

[Wilson Kwok]

Hi Tom,

It is held on Queued status ... thanks for your information.

2015-05-23 22:20 GMT+08:00 Tom Verdaat :

> If you're using the Kilo edition of Horizon you might be facing this bug:
> https://bugs.launchpad.net/horizon/+bug/1451429
>
>
>
> 2015-05-23 14:52 GMT+02:00 Wilson Kwok :
>
>> Hello,
>>
>> I'm used RDO installer to completed single node installation, I can use
>> glance command to upload image from this link:
>> https://cloud-images.ubuntu.com/releases/12.04.2/release/ubuntu-12.04-server-cloudimg-amd64-disk1.img
>>
>> Thanks
>>
>> ___
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Can't upload image form dashboard.

[Wilson Kwok]

Hello,

I'm used RDO installer to completed single node installation, I can use
glance command to upload image from this link:
https://cloud-images.ubuntu.com/releases/12.04.2/release/ubuntu-12.04-server-cloudimg-amd64-disk1.img

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Hi Matthoas,

No need now.
於 2015/5/21 上午4:07，"Matthias Runge"  寫道：

> On 20/05/15 17:01, Wilson Kwok wrote:
>
>> Hi Matthias,
>>
>> I can login dashbroad after clear browser cache, below is what you want:
>>
>> [root@localhost ~]# rpm -q python-django-openstack-auth
>> python-django-openstack-auth-1.2.0-2.el7.noarch
>>
>
>
> Is the issue still happening for you (i.e. do you still need to clear
> cookies)?
>
> Matthias
>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Hi Matthias,

I can login dashbroad after clear browser cache, below is what you want:

[root@localhost ~]# rpm -q python-django-openstack-auth
python-django-openstack-auth-1.2.0-2.el7.noarch

Thanks

2015-05-20 22:51 GMT+08:00 Matthias Runge :

> On 19/05/15 03:45, Wilson Kwok wrote:
>
>> Ok, and can you help Neutron? because no one reply my question.
>>
>> Thanks
>>
>> 於 2015/5/19 上午4:07，"Matthias Runge" > <mailto:mru...@redhat.com>> 寫道：
>>
>> On 17/05/15 17:12, Wilson Kwok wrote:
>>
>> Hi Salman,
>>
>> Thanks, this issue fixed.
>>
>>
>> It's an issue with python-django-openstack-auth. Please report
>> rpm -q python-django-openstack-auth
>>
>> A package fixing this was submitted last week to repos.
>>
>>
> Wilson, could you please answer my question?
>
> I'm trying to verify, if the bug still exists or if it's fixed.
> So, please do: rpm -q python-django-openstack-auth
>
>
> To answer your question: Unfortunately, I can not help you with neutron.
>
> Matthias
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Two Neutron two interface DOWN

[Wilson Kwok]

Hi Andreas,

Thanks for helping this newbie :D

I don't know the password of the instance.

Thanks

2015-05-20 4:12 GMT+08:00 Andreas Scheuring :

> Wilson,
> you can at least access your instance using the vnc console you already
> showed. If it's not working in the view you had screenshoted, use the
> link saying "show console only" or something like that. Then you should
> be able to log in to your instance. From there try to ping your internal
> and external gateway and see how for you get...
>
>
> The Security Group rules look fine!
>
> But in order to find out the real issue, it would be great if you
> collect the following data. Without that info it's just guessing...
> Just paste it into the mail:
>
>
> # Authenticate to your cloud [1] and then run the following command to
> show all the details of your external network:
> > neutron net-show home
>
> #Run these commands to collect more information about your host setup
>
> > ovs-vsctl show
>
> > ip a
>
> > ps -ax | grep neutron-
>
> > cat /etc/neutron/plugin.ini
>
> > cat /etc/neutron/plugins/ml2/ml2_conf.ini
>
>
> [1] http://docs.openstack.org/cli-reference/content/cli_openrc.html
>
>
>
>
> --
> Andreas
> (irc: scheuran)
>
>
> On Tue, 2015-05-19 at 20:42 +0800, Wilson Kwok wrote:
> > Also attached ifconfig to you.
> >
> > 2015-05-19 20:35 GMT+08:00 Wilson Kwok :
> > And the security group for this instance, please see attached.
> >
> > 2015-05-19 20:33 GMT+08:00 Wilson Kwok :
> > Hi Andreas,
> >
> >
> > The instance created (Please see attached
> > console.jpg), and it floating ip is 172.28.0.201
> > (Please see attached floating IP.jpg), inside of my
> > home PC can't ping 172.28.0.201, so I can't use
> > keypair to access this instance, any idea ?
> >
> >
> > Thanks
> >
> >
> > 2015-05-19 14:24 GMT+08:00 Andreas Scheuring
> > :
> > Hi Wilson,
> > don't get hung up on the port state for now,
> > let's focus on on your
> > "ping" test that is not working.
> >
> > I had a brief look at the pictures you
> > attached. The first thing that
> > caught my attention is that your instance is
> > shut off. So no chance to
> > ping it anyhow!
> >
> > If it's still not working with a running
> > instance. Check your security
> > groups setup. The Security Group attached to
> > your instance needs a rule
> > like this in order to ping your guest from
> > outside:
> > Ingress - CIDR 0.0.0.0/0 - icmp
> >
> >
> > And if you still have problems, we need to
> > have a look at your setup.
> > Please provide the following information to
> > allow further debugging. I
> > assume you configured your cloud with
> > Openvswitch...
> >
> >
> >
> > From your Controller Node:
> >
> > # Authenticate to your cloud [1] and then run
> > the following command to
> > show all the details of your external network:
> > > neutron net-show home
> >
> > #Run these commands to collect more
> > information about your host setup
> >
> >     > ovs-vsctl show
> >
> > > ip a
> >
> > > ps -ax | grep neutron-
> >
> >     > cat /etc/neutron/plugin.ini
> >
> > > cat /etc/neutron/plugins/ml2/ml2_conf.ini
> >
> >
> > [1]
> >
> http://docs.openstack.org/cli-reference/content/cli_openrc.html
> >
> >
> >
> > --
> > Andreas
> &

Re: [Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Ok, and can you help Neutron? because no one reply my question.

Thanks
於 2015/5/19 上午4:07，"Matthias Runge"  寫道：

> On 17/05/15 17:12, Wilson Kwok wrote:
>
>> Hi Salman,
>>
>> Thanks, this issue fixed.
>>
>>
> It's an issue with python-django-openstack-auth. Please report
> rpm -q python-django-openstack-auth
>
> A package fixing this was submitted last week to repos.
>
> Matthias
>
>
> ___
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Two Neutron two interface DOWN

[Wilson Kwok]

Anyone can help ?

2015-05-18 0:03 GMT+08:00 Wilson Kwok :

> Hello all,
>
> I have Neutron router of two interfaces DOWN problem, below is my home lab
> simple diagram and attached the Network Topology:
>
> Home Subnet = 172.28.0.0/16
>
> Openstack host computer = 172.28.0.150
>
> I created Neutron home network = 172.28.0.0/16
>
> Neutron router = extneral gateway(DOWN): 172.28.0.200 and internat
> gateway(DOWN): 192.168.0.1
>
> I created Neutron instance network = 192.168.0.0/24
>
> Is my network settings problem? and I already assigned Floating IP for
> instance that wanna Openstack host computer can ping instance, what can I
> do?
>
> Thanks
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Hi Salman,

Thanks, this issue fixed.

2015-05-17 16:40 GMT+08:00 Salman Khan :

> Clear your cached cookies, there is a bug when horizon session timeout it
> can't login again.
>
> --
> Salman khan
> On 17 May 2015 09:38, "Wilson Kwok"  wrote:
>
>> Hello all,
>>
>> I installed RDO into my physical server with 4 core CPU and 16GB RAM by
>> http://openstack.redhat.com/quickstart
>>
>> I can login dashbroad to configure networking, but suddenly can't login
>> with following message:
>>
>> Something went wrong!
>>
>> An unexpected error has occurred. Try refreshing the page. If that
>> doesn't help, contact your local administrator.
>>
>>
>> I have research this issue by google and followed below link to edit  
>> *ALLOWED_HOSTS
>> = [‘*’]*
>>
>>
>> https://www.rdoproject.org/forum/discussion/454/f19havana-single-instance-nova-errors/p1
>>
>> but still no luck, please can someone help ?
>>
>> ___
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Can't login dashbroad with RDO installation

[Wilson Kwok]

Hello all,

I installed RDO into my physical server with 4 core CPU and 16GB RAM by
http://openstack.redhat.com/quickstart

I can login dashbroad to configure networking, but suddenly can't login
with following message:

Something went wrong!

An unexpected error has occurred. Try refreshing the page. If that doesn't
help, contact your local administrator.


I have research this issue by google and followed below link to edit
*ALLOWED_HOSTS
= [‘*’]*

https://www.rdoproject.org/forum/discussion/454/f19havana-single-instance-nova-errors/p1

but still no luck, please can someone help ?
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Glance image can't be public

[Wilson Kwok]

Hello all,

I have been upload image by Glance that can show in image-list:

root@openstack:/home/wilson# glance image-list
+--++-+--+---++
| ID   | Name   | Disk Format | Container
Format | Size  | Status |
+--++-+--+---++
| 53d53881-961e-463d-b898-e8f6e56ede87 | Ubuntu | qcow2   | bare
  | 262078976 | active |
+--++-+--+---++

then I upload another one using following command:

glance image-create --name "testing" --disk-format qcow2 --container-format
bare --is-public ture < ubuntu-12.04-server-cloudimg-amd64-disk1.img

but it is not public

+--+--+
| Property | Value|
+--+--+
| checksum | 2bdc5bfac378385cedae59c4301799eb |
| container_format | bare |
| created_at   | 2015-05-13T04:50:12  |
| deleted  | False|
| deleted_at   | None |
| disk_format  | qcow2|
| id   | 013fca2c-8e13-4b67-a04f-7befca32c6a9 |
| is_public| False|
| min_disk | 0|
| min_ram  | 0|
| name | testing  |
| owner| None |
| protected| False|
| size | 262078976|
| status   | active   |
| updated_at   | 2015-05-13T04:50:17  |
| virtual_size | None |
+--+--+

so can't show in image-list, why ?

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Cinder created volume with status error

[Wilson Kwok]

Hello,

*I have using following command to create cinder volume:*

root@openstack:/home/wilson# cinder create --display-name Vol1 10
+-+--+
|   Property  |Value |
+-+--+
| attachments |  []  |
|  availability_zone  | nova |
|   bootable  |false |
|  created_at |  2015-05-12T06:26:11.094705  |
| display_description | None |
| display_name| Vol1 |
|  encrypted  |False |
|  id | a577999a-64f3-4ffb-9044-af5758a260cd |
|   metadata  |  {}  |
| size|  10  |
| snapshot_id | None |
| source_volid| None |
|status   |   creating   |
| volume_type | None |
+-+--+

*After created this volume, I type cinder list that displaying Status
error:*

root@openstack:/home/wilson# cinder list
+--++--+--+-+--+-+
|  ID  | Status | Display Name | Size |
Volume Type | Bootable | Attached to |
+--++--+--+-+--+-+
| a577999a-64f3-4ffb-9044-af5758a260cd | error  | Vol1 |  10  |
None|  false   | |
+--++--+--+-+--+-+

*Here is vgscan information:*

root@openstack:/home/wilson# vgs
  VG #PV #LV #SN Attr   VSize  VFree
  cinder-volumes   1   0   0 wz--n- 10.00g 10.00g

*Here is cinder.conf information:*

[DEFAULT]
rootwrap_config = /etc/cinder/rootwrap.conf
api_paste_confg = /etc/cinder/api-paste.ini
iscsi_helper = tgtadm
volume_name_template = volume-%s
volume_group = cinder-volumes
#volume_driver = cinder.volume.drivers.lvm.LVMISCSIDriver
verbose = True
auth_strategy = keystone
state_path = /var/lib/cinder
lock_path = /var/lock/cinder
volumes_dir = /var/lib/cinder/volumes

backend = cinder.openstack.common.rpc.impl_kombu
rabbit_host = 172.28.0.111
rabbit_port = 5672
rabbit_userid = guest
rabbit_password = 123RabbitMQFluX7

[keystone_authtoken]
auth_url = http://172.28.0.111:5000
auth_host = 172.28.0.111
auth_port = 35357
auth_protocol = http
admin_tenant_name = service
admin_user = cinder
admin_password = OpenStackNLinK

[database]
connection = mysql://cinderUser:StrongPass@localhost/cinder

*Here is cinder-scheduler.log:*

2015-05-12 14:00:42.997 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:01:43.007 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:02:43.012 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:03:43.010 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:04:43.041 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:05:43.045 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:06:43.040 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:07:43.028 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:08:43.036 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:09:43.040 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:10:43.033 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:11:43.040 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, 'tenant': None, 'user_identity': u'-
- - - -'}
2015-05-12 14:12:43.042 1895 WARNING cinder.context [-] Arguments dropped
when creating context: {'user': None, '

Re: [Openstack] Warning bypassing message

[Wilson Kwok]

Just tested service-list, but showing "os-ksadm", please see attached
screeshot.

2015-05-10 14:14 GMT+08:00 Wilson Kwok :

> Hello,
>
> I did it yesterday and successfully remove the warning, but now I have
> another problem, I just wake up and try to type keystone user-list or
> endpoint-list command that will show "users" and "endpoints", please see
> attached screenshot for details.
>
> Now the source file is:
>
> export OS_TENANT_NAME=test
>
> export OS_USERNAME=admin
> export OS_PASSWORD=adminpass
> export OS_AUTH_URL=http://172.28.0.113:5000/v2.0/
>
> Thanks
>
> 2015-05-10 3:11 GMT+08:00 Kurt Garloff :
>
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA512
>>
>> Hi Wilson,
>>
>> try commenting out the two SERVICE_ lines.
>>
>> HTH,
>> - --
>> Kurt Garloff 
>>
>> Am 9. Mai 2015 18:16:41 MESZ, schrieb Wilson Kwok :
>> >Hello all,
>> >
>> >
>> >I'm setting up single node, when I type "keystone user-create
>> >--name=glance --pass=123456 --email=gla...@abc.com" will show below
>> >warning:
>> >
>> >WARNING: Bypassing authentication using a token & endpoint
>> >(authentication credentials are being ignored).
>> >
>> >Here is my source file:
>> >
>> >export OS_TENANT_NAME=test
>> >export OS_USERNAME=admin
>> >export OS_PASSWORD=adminpass
>> >export SERVICE_TOKEN=tokenpass
>> >export SERVICE_ENDPOINT=http://172.28.0.113:35357/v2.0
>> >export OS_AUTH_URL=http://172.28.0.113:5000/v2.0/
>> >
>> >Thanks
>> >
>> >
>> >
>> >
>> >___
>> >Mailing list:
>> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> >Post to : openstack@lists.openstack.org
>> >Unsubscribe :
>> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> -BEGIN PGP SIGNATURE-
>> Version: APG v1.1.1
>>
>> iQI8BAEBCgAmBQJVTlvQHxxLdXJ0IEdhcmxvZmYgPGt1cnRAZ2FybG9mZi5kZT4A
>> CgkQ3k8bOiv/xb85HA/+PV6AaOdHAeC1ykIv4EwVwi9+bugO3ja0KS6SuIOZzmGr
>> /J/hqHTpBYsWl5zw1tBEzzHRr6KMYMKJL8Ws5ph20QERVrjXr90Xjh8lYwbbQ6aJ
>> mjzH31dbp697IlzfBT6V56Et+6bc0EOJud33rWuXohVyaLkBMdXz7m4XH/LJeOTq
>> PsX+xquinQXp0cjvYv7uXvTRldYTk7gTFE40mTY1JqjH915MZOdFr9ETb4teFa2E
>> Jf1st36UH9uhRA945BmiK85SSpeAN4HZNH5Bbj2Vd4T0GXn03FrwTriwSMsAUgyy
>> vUh0EorBKzrDov5Kq0gIqMn+N4pGAug8O7jqZzVPqAFX9xaJIdrgyl+EjyeMWgjB
>> AKRXBP6jrpZbOTZ+vLp5MJDgN5yT3cNVrrRyh/rFDSHZ430LVNvHV+H6IR2+rB05
>> s1K+rzqrWyqpvPJ5fRj/1S/zbHHVpwp1BjvHvJy88FH7LmJFbpVvqpilH/kFUprA
>> zh4b0ppInA3uPhKMmk29Pl9DcZeyPNzAL+GRJ8bk8dtbgHSkQOtY9oCSxxFIAKtD
>> WlSmuNDEoK/FaYBtzQz6yV7P6zr2tvipl7QMosrBKEkNV/BSC20COn5UdQh6lMXB
>> Y2OxOo4igjJIMXSIaNW/PHms834ryn2A6+Aj8EoQ0TlWgzzvM1Fbx7o9fpfjv8w=
>> =y+lV
>> -END PGP SIGNATURE-
>>
>>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Warning bypassing message

[Wilson Kwok]

Hello,

I did it yesterday and successfully remove the warning, but now I have
another problem, I just wake up and try to type keystone user-list or
endpoint-list command that will show "users" and "endpoints", please see
attached screenshot for details.

Now the source file is:

export OS_TENANT_NAME=test

export OS_USERNAME=admin
export OS_PASSWORD=adminpass
export OS_AUTH_URL=http://172.28.0.113:5000/v2.0/

Thanks

2015-05-10 3:11 GMT+08:00 Kurt Garloff :

> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> Hi Wilson,
>
> try commenting out the two SERVICE_ lines.
>
> HTH,
> - --
> Kurt Garloff 
>
> Am 9. Mai 2015 18:16:41 MESZ, schrieb Wilson Kwok :
> >Hello all,
> >
> >
> >I'm setting up single node, when I type "keystone user-create
> >--name=glance --pass=123456 --email=gla...@abc.com" will show below
> >warning:
> >
> >WARNING: Bypassing authentication using a token & endpoint
> >(authentication credentials are being ignored).
> >
> >Here is my source file:
> >
> >export OS_TENANT_NAME=test
> >export OS_USERNAME=admin
> >export OS_PASSWORD=adminpass
> >export SERVICE_TOKEN=tokenpass
> >export SERVICE_ENDPOINT=http://172.28.0.113:35357/v2.0
> >export OS_AUTH_URL=http://172.28.0.113:5000/v2.0/
> >
> >Thanks
> >
> >
> >
> >
> >___
> >Mailing list:
> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >Post to : openstack@lists.openstack.org
> >Unsubscribe :
> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> -BEGIN PGP SIGNATURE-
> Version: APG v1.1.1
>
> iQI8BAEBCgAmBQJVTlvQHxxLdXJ0IEdhcmxvZmYgPGt1cnRAZ2FybG9mZi5kZT4A
> CgkQ3k8bOiv/xb85HA/+PV6AaOdHAeC1ykIv4EwVwi9+bugO3ja0KS6SuIOZzmGr
> /J/hqHTpBYsWl5zw1tBEzzHRr6KMYMKJL8Ws5ph20QERVrjXr90Xjh8lYwbbQ6aJ
> mjzH31dbp697IlzfBT6V56Et+6bc0EOJud33rWuXohVyaLkBMdXz7m4XH/LJeOTq
> PsX+xquinQXp0cjvYv7uXvTRldYTk7gTFE40mTY1JqjH915MZOdFr9ETb4teFa2E
> Jf1st36UH9uhRA945BmiK85SSpeAN4HZNH5Bbj2Vd4T0GXn03FrwTriwSMsAUgyy
> vUh0EorBKzrDov5Kq0gIqMn+N4pGAug8O7jqZzVPqAFX9xaJIdrgyl+EjyeMWgjB
> AKRXBP6jrpZbOTZ+vLp5MJDgN5yT3cNVrrRyh/rFDSHZ430LVNvHV+H6IR2+rB05
> s1K+rzqrWyqpvPJ5fRj/1S/zbHHVpwp1BjvHvJy88FH7LmJFbpVvqpilH/kFUprA
> zh4b0ppInA3uPhKMmk29Pl9DcZeyPNzAL+GRJ8bk8dtbgHSkQOtY9oCSxxFIAKtD
> WlSmuNDEoK/FaYBtzQz6yV7P6zr2tvipl7QMosrBKEkNV/BSC20COn5UdQh6lMXB
> Y2OxOo4igjJIMXSIaNW/PHms834ryn2A6+Aj8EoQ0TlWgzzvM1Fbx7o9fpfjv8w=
> =y+lV
> -END PGP SIGNATURE-
>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Warning bypassing message

[Wilson Kwok]

Hello all,


I'm setting up single node, when I type "keystone user-create
--name=glance --pass=123456 --email=gla...@abc.com" will show below
warning:

WARNING: Bypassing authentication using a token & endpoint
(authentication credentials are being ignored).

Here is my source file:

export OS_TENANT_NAME=test
export OS_USERNAME=admin
export OS_PASSWORD=adminpass
export SERVICE_TOKEN=tokenpass
export SERVICE_ENDPOINT=http://172.28.0.113:35357/v2.0
export OS_AUTH_URL=http://172.28.0.113:5000/v2.0/

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] How to ping instance IP ?

[Wilson Kwok]

Hello,

I used http://www.stackgeek.com/guides/gettingstarted.html to installed
single node, do you have another guide that can match stackgeek ?

Thanks
於 2015/5/7 上午4:41，"Kevin Benton"  寫道：

> Yes, it sounds like you just have nova network right now. Did you use
> devstack? If so, follow this guide.
> https://wiki.openstack.org/wiki/NeutronDevstack
>
> On Wed, May 6, 2015 at 11:02 AM, Wilson Kwok  wrote:
>
>> repeat this message to all,
>>
>> I can't see network and router option in System panel, I think need
>> install  neutron, right ? do you have any guide for help ?
>>
>> Thanks
>>
>> 2015-05-07 1:53 GMT+08:00 Wilson Kwok :
>>
>>> Hello,
>>>
>>> I can't see network and router option in System panel, I think need
>>> install  neutron, right ? do you have any guide for help ?
>>>
>>> Thanks
>>>
>>> 2015-05-06 23:15 GMT+08:00 Wilson Kwok :
>>>
>>>> Hi Jonathan Abdiel Gonzalez Valdebenito,
>>>>
>>>> Sorry, I'm a newbie of Openstack, do you mean create virtual router
>>>> between 172.28.0.0 and 10.0.47.0 ? please see below simply diagram.
>>>>
>>>> TP-link router = public IP address 119.101.54.x and lan IP address
>>>> 172.28.0.1
>>>>
>>>> Home computer = 172.28.0.130
>>>>
>>>> Ubuntu eth0 (no IP address) and eth1 172.28.0.105 (for managmeent)
>>>>
>>>> Virtual router = home interface 172.28.0.254 and internal interface
>>>> 10.0.47.254
>>>>
>>>> br100 IP address = 10.0.47.1 map to eth0
>>>>
>>>> instance01 IP address = 10.0.47.2
>>>> Thanks
>>>>
>>>> 2015-05-06 21:56 GMT+08:00 Jonathan Abdiel Gonzalez Valdebenito <
>>>> jonathan.abd...@gmail.com>:
>>>>
>>>>> Hi Wilson,
>>>>>
>>>>> If that so then you have a problem you didn't even configure the
>>>>> network for the instances which means you may created a network but not a
>>>>> router so if you don't creater a router you can't access the instances
>>>>> network.
>>>>>
>>>>> On Wed, May 6, 2015 at 6:36 AM Wilson Kwok  wrote:
>>>>>
>>>>>> Hi Jonathan Abdiel Gonzalez Valdebenito,
>>>>>>
>>>>>> After I type ip netns nothing display.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2015-05-05 22:28 GMT+08:00 Jonathan Abdiel Gonzalez Valdebenito <
>>>>>> jonathan.abd...@gmail.com>:
>>>>>>
>>>>>>> Hi Wilson,
>>>>>>>
>>>>>>> To ping the instance I suggest you to use these commands:
>>>>>>>
>>>>>>> ip netns <-- to list your namespaces and pick up the one with the
>>>>>>> router name
>>>>>>> ip netns exec router-(hash) ping  < -- with this you
>>>>>>> can ping the instance.
>>>>>>>
>>>>>>> Hope it was usefull
>>>>>>>
>>>>>>> On Tue, May 5, 2015 at 10:57 AM Wilson Kwok 
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> Here is my home lap network settings:
>>>>>>>>
>>>>>>>> Home computer 172.28.0.130
>>>>>>>>
>>>>>>>> Ubuntu eth0 (no IP address)
>>>>>>>>eth1 172.28.0.105 (for managmeent)
>>>>>>>>
>>>>>>>> br100 10.0.47.1 map to eth0
>>>>>>>>
>>>>>>>> instance01 10.0.47.2
>>>>>>>>
>>>>>>>> My question is home computer can't ping instance01 10.0.47.2, even
>>>>>>>> Ubuntu itselves,
>>>>>>>> I already allow security group ICMP ALL, can anyone help ?
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> ___
>>>>>>>> Mailing list:
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>> Post to : openstack@lists.openstack.org
>>>>>>>> Unsubscribe :
>>>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
>>
>> ___
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
>
>
> --
> Kevin Benton
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] How to ping instance IP ?

[Wilson Kwok]

repeat this message to all,

I can't see network and router option in System panel, I think need install
 neutron, right ? do you have any guide for help ?

Thanks

2015-05-07 1:53 GMT+08:00 Wilson Kwok :

> Hello,
>
> I can't see network and router option in System panel, I think need
> install  neutron, right ? do you have any guide for help ?
>
> Thanks
>
> 2015-05-06 23:15 GMT+08:00 Wilson Kwok :
>
>> Hi Jonathan Abdiel Gonzalez Valdebenito,
>>
>> Sorry, I'm a newbie of Openstack, do you mean create virtual router
>> between 172.28.0.0 and 10.0.47.0 ? please see below simply diagram.
>>
>> TP-link router = public IP address 119.101.54.x and lan IP address
>> 172.28.0.1
>>
>> Home computer = 172.28.0.130
>>
>> Ubuntu eth0 (no IP address) and eth1 172.28.0.105 (for managmeent)
>>
>> Virtual router = home interface 172.28.0.254 and internal interface
>> 10.0.47.254
>>
>> br100 IP address = 10.0.47.1 map to eth0
>>
>> instance01 IP address = 10.0.47.2
>> Thanks
>>
>> 2015-05-06 21:56 GMT+08:00 Jonathan Abdiel Gonzalez Valdebenito <
>> jonathan.abd...@gmail.com>:
>>
>>> Hi Wilson,
>>>
>>> If that so then you have a problem you didn't even configure the network
>>> for the instances which means you may created a network but not a router so
>>> if you don't creater a router you can't access the instances network.
>>>
>>> On Wed, May 6, 2015 at 6:36 AM Wilson Kwok  wrote:
>>>
>>>> Hi Jonathan Abdiel Gonzalez Valdebenito,
>>>>
>>>> After I type ip netns nothing display.
>>>>
>>>> Thanks
>>>>
>>>>
>>>>
>>>> 2015-05-05 22:28 GMT+08:00 Jonathan Abdiel Gonzalez Valdebenito <
>>>> jonathan.abd...@gmail.com>:
>>>>
>>>>> Hi Wilson,
>>>>>
>>>>> To ping the instance I suggest you to use these commands:
>>>>>
>>>>> ip netns <-- to list your namespaces and pick up the one with the
>>>>> router name
>>>>> ip netns exec router-(hash) ping  < -- with this you can
>>>>> ping the instance.
>>>>>
>>>>> Hope it was usefull
>>>>>
>>>>> On Tue, May 5, 2015 at 10:57 AM Wilson Kwok  wrote:
>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> Here is my home lap network settings:
>>>>>>
>>>>>> Home computer 172.28.0.130
>>>>>>
>>>>>> Ubuntu eth0 (no IP address)
>>>>>>eth1 172.28.0.105 (for managmeent)
>>>>>>
>>>>>> br100 10.0.47.1 map to eth0
>>>>>>
>>>>>> instance01 10.0.47.2
>>>>>>
>>>>>> My question is home computer can't ping instance01 10.0.47.2, even
>>>>>> Ubuntu itselves,
>>>>>> I already allow security group ICMP ALL, can anyone help ?
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> ___
>>>>>> Mailing list:
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>> Post to : openstack@lists.openstack.org
>>>>>> Unsubscribe :
>>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>>>>
>>>>>
>>>>
>>
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] How to ping instance IP ?

[Wilson Kwok]

Hello,

I forgot to tell everyone this lab is using icehouse, I have TP-Link router
public IP address is 119.101.54.x, lan IP address is 172.28.0.1, floating
IP range already enable on instance, so below is new simply home lab
diagram:


TP-link router = public IP address 119.101.54.x and lan IP address
172.28.0.1

Home computer = 172.28.0.130

Ubuntu eth0 (no IP address) and eth1 172.28.0.105 (for managmeent)

br100 IP address = 10.0.47.1 map to eth0

instance01 IP address = 10.0.47.2

I don't understand what's "which interface/bridge your neutron router is
attached to"

When I type "neutron router-list" have following error:

Cloud not find Service or Region in Service Catalog.

and my lab do not have 172.24.0.0 subnet, please help.


於 2015/5/6 上午12:12，"Brian Haley"  寫道：

> On 05/05/2015 09:47 AM, Wilson Kwok wrote:
>
>> Hello,
>>
>> Here is my home lap network settings:
>>
>> Home computer 172.28.0.130
>>
>> Ubuntu eth0 (no IP address)
>> eth1 172.28.0.105 (for managmeent)
>>
>> br100 10.0.47.1 map to eth0
>>
>> instance01 10.0.47.2
>>
>
> This is your floating IP, right?
>
>  My question is home computer can't ping instance01 10.0.47.2, even Ubuntu
>> itselves,
>> I already allow security group ICMP ALL, can anyone help ?
>>
>
> You will need to add a route, but to do that you'll need to know which
> interface/bridge your neutron router is attached to.  Assuming it is br100
> it would be something like this:
>
> $ neutron router-list
> ...
> "ip_address": "172.24.0.2"
> ...
>
> # ip r add 10/8 via 172.24.0.2 dev br100
>
> Devstack does a lot of this during setup, even if you're not using it
> sometimes looking at the things it does might be helpful - see file
> lib/neutron-legacy
>
> -Brian
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] How to ping instance IP ?

[Wilson Kwok]

Hello,

Here is my home lap network settings:

Home computer 172.28.0.130

Ubuntu eth0 (no IP address)
   eth1 172.28.0.105 (for managmeent)

br100 10.0.47.1 map to eth0

instance01 10.0.47.2

My question is home computer can't ping instance01 10.0.47.2, even Ubuntu
itselves,
I already allow security group ICMP ALL, can anyone help ?

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] How to route to instance from external router

[Wilson Kwok]

Hello all,

I'm testing Openstack at home, I already success create instance
with private IP adddress and floating IP address, but I have question how
to let external user access to instance, and intance access to internet,
the following description is my network settings:

1. My home network is 172.28.0.0/16 and router gateway is 172.28.0.254
2. Private network for instance is 10.0.47.0/24
3. Bridge interface named br100 with eth0 is 172.28.0.1

1. My concept is add static route (destination 10.0.47.0/24 via 172.28.0.1
Bridge interface IP) and port forward in router, let user can reach
instance.

2. Because instance private IP address assigned by dnsmasq, so I think use
the following nova-network command can access to internet:

nova-manage network create private --fixed_range_v4=10.0.47.0/24
--num_networks=1
--bridge=br100 --bridge_interface=eth0 --network_size=255

Please give me idea, thanks.
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Cant login Horizon

[Wilson Kwok]

I have installed below services by 7 VM for testing.

- a SQL database (MySQL)
- a message queueing system (RabbitMQ)
- Keystone
- Glance
- Nova
- Horizon
- API

Thanks
 於 2015/3/30 上午9:12，"James Fleet"  寫道：

> Hello,
>
> What type installation are you trying to install ? There is a devstack
> installation method that you can install to a VM or VMs. Here is the link
> to the Documents.
>
>
> http://docs.openstack.org/developer/devstack/
>
>
>
> On Sun, Mar 29, 2015 at 1:49 PM, Wilson Kwok  wrote:
>
>> Hello uwe,
>>
>> I just installed Nova, but still no luck, the error still same, I already
>> installed your listing service.
>>
>> 172.28.0.134 is API machine that showing error in Apache log.
>>
>> Thanks
>>
>> 2015-03-27 0:29 GMT+08:00 Uwe Sauter :
>>
>>> Take a look into the Horizon log files, probably under /var/log/horizon.
>>>
>>> Also make sure that Keystone is running and can be reached from Apache.
>>>
>>>
>>> Am 26.03.2015 um 17:14 schrieb Wilson Kwok:
>>> > Hi all,
>>> >
>>> > I just installed Horizon and I can see login page, but can't login
>>> with admin account, please see attached screenshot for error
>>> > information.
>>> >
>>> > Thanks
>>> >
>>> >
>>> > ___
>>> > Mailing list:
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> > Post to : openstack@lists.openstack.org
>>> > Unsubscribe :
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> >
>>>
>>>
>>> ___
>>> Mailing list:
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>> Post to : openstack@lists.openstack.org
>>> Unsubscribe :
>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>>
>>
>>
>> ___
>> Mailing list:
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>> Post to : openstack@lists.openstack.org
>> Unsubscribe :
>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>>
>>
>
>
> --
> James R. Fleet
> Innovative Solutions Technology
> 484 Williamsport Pike  #135
> Martinsburg, WV 25404
>  888.809.0223 ext.702
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Re: [Openstack] Cant login Horizon

[Wilson Kwok]

Hello uwe,

I just installed Nova, but still no luck, the error still same, I already
installed your listing service.

172.28.0.134 is API machine that showing error in Apache log.

Thanks

2015-03-27 0:29 GMT+08:00 Uwe Sauter :

> Take a look into the Horizon log files, probably under /var/log/horizon.
>
> Also make sure that Keystone is running and can be reached from Apache.
>
>
> Am 26.03.2015 um 17:14 schrieb Wilson Kwok:
> > Hi all,
> >
> > I just installed Horizon and I can see login page, but can't login with
> admin account, please see attached screenshot for error
> > information.
> >
> > Thanks
> >
> >
> > ___
> > Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> > Post to : openstack@lists.openstack.org
> > Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> >
>
>
> ___
> Mailing list:
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
> Post to : openstack@lists.openstack.org
> Unsubscribe :
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
>
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

[Openstack] Cant login Horizon

[Wilson Kwok]

Hi all,

I just installed Horizon and I can see login page, but can't login with
admin account, please see attached screenshot for error information.

Thanks
___
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to : openstack@lists.openstack.org
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack