Re: [opensuse] unable to access website after 10.2 install [CLUE 2]

[Randall R Schulz]

Hello again,

I've made several Wireshark captures while attempting to retrieve the 
main HTML content from . Every time I use 
wget to try to retrieve that page, the generated checksum is 0x15a8, 
regardless of the fact that the packet content is never exactly the 
same twice and hence should be producing a different checksum each 
time.

On the other hand, when I use Firefox (note, this is version Firefox 
2.0), the generated checksum is different for each request, but still 
wrong. Naturally, the HTTP-level payload is also different, since at a 
minimum it includes a client identifying string. However, I noticed 
that when Firefox drives the transaction, there is a TCP retransmission 
request not seen when I use wget. These retransmissions do exhibit 
repeated checksums even though the proper checksum changes.


I don't know what could be causing this and why it's (so far) manifested 
only when trying to access this particular site / address, but clearly 
the checksum generation is the problem.

Perhaps it is in some way associated with the destination IP address or 
range of addresses?


Randall Schulz
-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [opensuse] unable to access website after 10.2 install [CLUE 2]

[Dominique Leuenberger]

Randall, Hi all


Dominique Leuenberger
IT Manager
 
TMF Romania S.R.L.
Central Business Park
133, Serban Voda Str.
Building A, 2nd floor 
Sector 4, Bucharest
Romania
 
T. +40 (0) 21 316 6848
F. +40 (0) 21 316 6838
M.+40 (0) 72 910 42 42
[EMAIL PROTECTED] 
>>> Randall R Schulz <[EMAIL PROTECTED]> 12/19/06 7:43 PM >>>
>I don't know what could be causing this and why it's (so far)
manifested 
>only when trying to access this particular site / address, but clearly 
>the checksum generation is the problem.
>
>Perhaps it is in some way associated with the destination IP address or

>range of addresses?
>
>

I made just some scans using wireshark too (I can not access the site)
and I don't have any crc checksums. So I don't think this is a problem
in this case.

Still... there IS a problem, but it's quiet difficult to tell where from
it comes. We stay tuned on this, do we Randall? Maybe you can also join
IRC, so we don't test the same things or so we can discuss our results
directly?

Dominique
-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [opensuse] unable to access website after 10.2 install [CLUE 2]

[Nick Zentena]

On Tuesday 19 December 2006 12:43, Randall R Schulz wrote:

>
> I don't know what could be causing this and why it's (so far) manifested
> only when trying to access this particular site / address, but clearly
> the checksum generation is the problem.
>
> Perhaps it is in some way associated with the destination IP address or
> range of addresses?


No it's also happening with www.keh.com for me. I haven't noticed it on 
any 
other site but considering the number of sites out there it's likely hitting 
others.

Nick
-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [opensuse] unable to access website after 10.2 install [CLUE 2]

[Tom Patton]

On Tue, 2006-12-19 at 09:43 -0800, Randall R Schulz wrote:

> 
> I don't know what could be causing this and why it's (so far) manifested 
> only when trying to access this particular site / address, but clearly 
> the checksum generation is the problem.
I'm by far a guru here, and still waiting on my boxed 10.2, but I wonder
if any of you have tried dial-up (modem0) vs your eth0 interface...?

All I can say at this point is it workes here, and is a very interesting
problem...


-- 
Tom in NM 
SuSE 9.3/Evolution 
11:21am up 8 days 22:02, 3 users, load average: 0.03, 0.12, 0.14 


-- 
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]