[opensuse-arm] No USB keyboard in Cubietruck

[Ancor Gonzalez Sosa]

Thanks to Andreas Färber, we have openSUSE running in our Cubietruck
now. It works nicely with the serial cable, but it does not recognize
any USB keyboard. Keyboard works perfectly with Cubian.

Any clue?

Cheers.
-- 
Ancor González Sosa
YaST Team at SUSE Linux GmbH
-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] ARM and the Raspberry

[Freek de Kruijf]

Op maandag 7 december 2015 11:59:36 schreef Andy Norrie:
> SD Image writer is supplied via the SD card owners to write a bootable
> image to the SD card. It is the normal way to make a bootable SD card for
> the Pi. On the older Pi (ARM6) Suse runs fine but neither that version or a
> downloaded one works on the Pi 2. I have downloaded several images eg
> 
> opensuse-13.1-arm-jeos-raspberrypi.arm7i-1.12.1-build38.15.raw
> 
> 
>  and I can read the first partition on the disk (fat) and it seems correct
> but it does not boot. I dont see any errors on the SD card eg log file. I
> was hoping someone else had this working as I am a bit stuck.
> 
> Thanks, Andy

Raspberry Pi 1 has an armv6  architecture, whereas Raspberry Pi 2 has an armv7 
architecture, so it is not weird it does not work.

You need an image for the Raspberry Pi 2, which you can find on
http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi2/images/
or
http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi2:/Staging/images/

I only worked with JeOS iages.

AFAIK both work and are in fact openSUSE Tumbleweed systems. After 
installation you can keep current, if you wish, with Tumbleweed by using 
"zypper up"

-- 
fr.gr.

member openSUSE
Freek de Kruijf
-- 
fr.gr.

member openSUSE
Freek de Kruijf

-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org

Re: [opensuse-arm] perl-bootloader

[Matwey V. Kornilov]

2015-12-07 12:18 GMT+03:00 Andreas Schwab :
> "Matwey V. Kornilov"  writes:
>
>> I've implemented yet another version:
>> https://github.com/openSUSE/perl-bootloader/pull/83
>
> Are you aware of this?
>
> 

It has been discussed here: https://github.com/openSUSE/perl-bootloader/pull/81
And this is why I implemented another version.


>
> Andreas.
>
> --
> Andreas Schwab, SUSE Labs, sch...@suse.de
> GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE  1748 E4D4 88E3 0EEA B9D7
> "And now for something completely different."



-- 
With best regards,
Matwey V. Kornilov
http://blog.matwey.name
xmpp://0x2...@jabber.ru
-- 
To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org
To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org