commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2016-09-05 21:11:32 Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) Package is "sdparm" Changes: --- /work/SRC/openSUSE:Factory/sdparm/sdparm.changes2014-12-31 11:21:59.0 +0100 +++ /work/SRC/openSUSE:Factory/.sdparm.new/sdparm.changes 2016-09-05 21:11:34.0 +0200 @@ -1,0 +2,33 @@ +Wed Aug 24 17:49:33 UTC 2016 - alexander_nau...@opensuse.org + +- Update to version 1.10 + * add --inhex=FN option for decoding without device present, + FN is interpreted as response to mode sense(10) command + * add --raw option to interpret FN as binary (def: ASCII hex) + * add --pdt=PDT option for use with --inhex=FN + * --quiet used twice hides changeable, default + saved + * add IO advice hints grouping mode page (sbc4r06, 8) + * add Unit serial number VPD page specific sanity check + * add NO_PI_CHK to Supported block lengths and protection + types VPD page + * add Background operation control mpage (sbc4r07) + * Read-write error recovery mpage: add Misaligned writes + reporting field (MWR) + * sync tape mpages with ssc5r02 + * add Block limits extension VPD page + * add Device constituents VPD page + * add LB protection VPD page (ssc5r02a) + * LB provisioning VPD page: expand LBPRZ, add Minimum and + Threshold percentage fields + * device identification VPD page: add decoding for locally + assigned UUIDs (spc5r08) + * the --inhex=FN option together with --inquiry decodes + FN as a single VPD page + * improve lto5 and lto6 vendor mpage support + * sync to spc5r08 and sbc4r10 + * add SAS G5 (22.5 Gbps) settings (spl4r06) + * point svn:externals to rev 663 of sg3_utils + * upgrade automake to version 1.15 (U15.10) + * autogen.sh: upgrade to buildconf 20091223 version + +--- Old: sdparm-1.09.tar.xz New: sdparm-1.10.tar.xz Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.MdJi6x/_old 2016-09-05 21:11:35.0 +0200 +++ /var/tmp/diff_new_pack.MdJi6x/_new 2016-09-05 21:11:35.0 +0200 @@ -1,7 +1,7 @@ # # spec file for package sdparm # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: sdparm -Version:1.09 +Version:1.10 Release:0 Summary:List or change SCSI disk parameters License:BSD-3-Clause ++ sdparm-1.09.tar.xz -> sdparm-1.10.tar.xz ++ 12632 lines of diff (skipped)
commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2014-12-31 11:21:56 Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) Package is "sdparm" Changes: --- /work/SRC/openSUSE:Factory/sdparm/sdparm.changes2013-10-29 09:35:26.0 +0100 +++ /work/SRC/openSUSE:Factory/.sdparm.new/sdparm.changes 2014-12-31 11:21:59.0 +0100 @@ -1,0 +2,21 @@ +Sun Dec 28 15:04:12 UTC 2014 - p.drou...@gmail.com + +- Update to version 1.09 + + decode Third Party Copy VPD page + + Supported block lengths and protection types (sbc4r01) + +Block device characteristics extension VPD pages added + + zoned block device characterics VPD page added (zbc-r01c) + + fix manufacturer-assigned serial number VPD page length + + device id VPD: T10 vendor identification designator clean up + + block device characteristics VPD: add ZONED (sbc4r04) + + SAS/SPL disconnect-reconnect mpage: expand + + SAS protocol specific port mpage: add MAXR field (spl4r01) + + standard inquiry response (sinq): add LU_CONG + + change ibm vendor code to lto5 and lto6 + + point svn:externals to rev 620 of sg3_utils + + upgrade automake to version 1.14.1 + + configure: add --disable-libsgutils so build bypasses that +library if present + + win32: some --wscan and compile fixes + +--- Old: sdparm-1.08.tar.xz New: sdparm-1.09.tar.xz Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.v1RLYC/_old 2014-12-31 11:22:00.0 +0100 +++ /var/tmp/diff_new_pack.v1RLYC/_new 2014-12-31 11:22:00.0 +0100 @@ -17,7 +17,7 @@ Name: sdparm -Version:1.08 +Version:1.09 Release:0 Summary:List or change SCSI disk parameters License:BSD-3-Clause ++ sdparm-1.08.tar.xz -> sdparm-1.09.tar.xz ++ 18468 lines of diff (skipped) -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2013-10-29 09:35:24 Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) Package is "sdparm" Changes: --- /work/SRC/openSUSE:Factory/sdparm/sdparm.changes2013-06-17 10:21:00.0 +0200 +++ /work/SRC/openSUSE:Factory/.sdparm.new/sdparm.changes 2013-10-29 09:35:26.0 +0100 @@ -1,0 +2,6 @@ +Wed Oct 23 15:33:48 UTC 2013 - p.drou...@gmail.com + +- Remove %fillup_prereq and %insserv_prereq; package doesn't provide + any sysvinit script + +--- Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.1tHNDq/_old 2013-10-29 09:35:26.0 +0100 +++ /var/tmp/diff_new_pack.1tHNDq/_new 2013-10-29 09:35:26.0 +0100 @@ -26,11 +26,8 @@ #Freecode-URL: http://freecode.com/projects/sdparm Source: http://sg.danny.cz/sg/p/%name-%version.tar.xz -BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: libsgutils-devel BuildRequires: xz -Requires(pre): %fillup_prereq -Requires(pre): %insserv_prereq Provides: scsi:/sbin/sdparm %description -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2013-06-17 10:20:59 Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) Package is "sdparm" Changes: --- /work/SRC/openSUSE:Factory/sdparm/sdparm.changes2012-04-23 16:13:14.0 +0200 +++ /work/SRC/openSUSE:Factory/.sdparm.new/sdparm.changes 2013-06-17 10:21:00.0 +0200 @@ -1,0 +2,21 @@ +Thu Jun 13 13:56:56 UTC 2013 - jeng...@inai.de + +- Update to new upstream release 1.08 +* New utilities: scsi_ch_swp, sas_disk_blink +* Tracked changes at t10.org since January 2012: +* device id VPD: add protocol specific port identifier +* control extension mpage: add max sense data length +* power condition mpage: FIDCPC->CCF_IDLE, FSBCPC->CCF_STAND, + FSTCPC->CCF_STOPP (spc4r34+) +* caching mpage: add SYNC_PROG field (sbc3r33) +* block device characteristics VPD page additions sbc3r34 +* extended inquiry vpd page: add max supported sense data length +* protocol-specific port information VPD page for SAS SSP, + persistent connection (spl3r2), power disable (spl3r3) +* allow --readonly with --set= and --clear= +* add placeholder for third party copy VPD page +* supply more information if a UA occurs +- Normalized install procedure +- Build with libsgutils support + +--- Old: sdparm-1.07.tgz New: sdparm-1.08.tar.xz Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.vdIdPj/_old 2013-06-17 10:21:01.0 +0200 +++ /var/tmp/diff_new_pack.vdIdPj/_new 2013-06-17 10:21:01.0 +0200 @@ -1,7 +1,7 @@ # # spec file for package sdparm # -# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,17 +17,21 @@ Name: sdparm -Version:1.07 +Version:1.08 Release:0 Summary:List or change SCSI disk parameters License:BSD-3-Clause Group: Hardware/Other -Url:http://www.torque.net/sg/sdparm.html -Source: http://sg.danny.cz/sg/p/%{name}-%{version}.tgz +Url:http://sg.danny.cz/sg/sdparm.html + +#Freecode-URL: http://freecode.com/projects/sdparm +Source: http://sg.danny.cz/sg/p/%name-%version.tar.xz +BuildRoot: %{_tmppath}/%{name}-%{version}-build +BuildRequires: libsgutils-devel +BuildRequires: xz Requires(pre): %fillup_prereq Requires(pre): %insserv_prereq Provides: scsi:/sbin/sdparm -BuildRoot: %{_tmppath}/%{name}-%{version}-build %description SCSI disk parameters are held in mode pages. This utility lists or @@ -45,19 +49,19 @@ %build # None of these is performance-critical, so use -Os rather than -O2: -export RPM_OPT_FLAGS=`echo $RPM_OPT_FLAGS | sed 's/\-O2/-Os/'` -CFLAGS="$RPM_OPT_FLAGS -Wall" ./configure --prefix=%{_prefix} --infodir=%{_infodir} --mandir=%{_mandir} -%__make %{?_smp_mflags} +CFLAGS=$(echo "%optflags" | sed 's/\-O2/-Os/') +%configure +make %{?_smp_mflags} %install -#make install DESTDIR=%{buildroot} PREFIX=%{_prefix} MANDIR=%{buildroot}%{_mandir} bindir=/sbin -%makeinstall PREFIX=%{_prefix} MANDIR=%{buildroot}%{_mandir} bindir=/sbin +make install DESTDIR="%buildroot" bindir="/sbin" %files %defattr(-,root,root) -# sdparm -%attr(755,root,root) /sbin/sdparm -%doc %{_mandir}/man8/sdparm.8.gz +/sbin/sas_disk_blink +/sbin/scsi_ch_swp +/sbin/sdparm +%_mandir/man8/*.8* %doc README ChangeLog %changelog -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2012-04-23 16:13:12 Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) Package is "sdparm", Maintainer is "h...@suse.com" Changes: --- /work/SRC/openSUSE:Factory/sdparm/sdparm.changes2011-09-23 12:45:52.0 +0200 +++ /work/SRC/openSUSE:Factory/.sdparm.new/sdparm.changes 2012-04-23 16:13:14.0 +0200 @@ -1,0 +2,14 @@ +Sun Apr 22 11:46:53 UTC 2012 - pu...@suse.com + +- Update to version 1.07 + - LB provisioning + Block limits VPD pages to sbc3r27 + - Enhanced phy control page: optical mode enabled (spl-r07) + - Phy control and discover page: sync to spl2r02 + - sync with spc4r31+32 (handle status good with sense) + - extented inquiry VPD: add POA_SUP, HRA_SUP and VSA_SUP + - application tag mode page subcode 0xf0->0x2 (sbc3r28) + - add 'sinq' pseudo VPD page for standard inquiry response + - add power consumption mode and VPD pages (spc4r33) + - point out some mode page numbers are vendor specific + +--- Old: sdparm-1.06.tar.bz2 New: sdparm-1.07.tgz Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.1lLJ4H/_old 2012-04-23 16:13:16.0 +0200 +++ /var/tmp/diff_new_pack.1lLJ4H/_new 2012-04-23 16:13:16.0 +0200 @@ -1,7 +1,7 @@ # # spec file for package sdparm # -# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -16,17 +16,16 @@ # - Name: sdparm -Version:1.06 -Release:1 -License:BSD-3-Clause +Version:1.07 +Release:0 Summary:List or change SCSI disk parameters -Url:http://www.torque.net/sg/sdparm.html +License:BSD-3-Clause Group: Hardware/Other -Source: http://sg.torque.net/sg/p/%{name}-%{version}.tar.bz2 -PreReq: %fillup_prereq -PreReq: %insserv_prereq +Url:http://www.torque.net/sg/sdparm.html +Source: http://sg.danny.cz/sg/p/%{name}-%{version}.tgz +Requires(pre): %fillup_prereq +Requires(pre): %insserv_prereq Provides: scsi:/sbin/sdparm BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -61,7 +60,4 @@ %doc %{_mandir}/man8/sdparm.8.gz %doc README ChangeLog -%clean -test ! -z %{buildroot} -a %{buildroot} != "/" && rm -rf %{buildroot} - %changelog -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at 2011-12-06 19:03:04 Comparing /work/SRC/openSUSE:Factory/sdparm (Old) and /work/SRC/openSUSE:Factory/.sdparm.new (New) Package is "sdparm", Maintainer is "h...@suse.com" Changes: Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.jDnp3U/_old 2011-12-06 19:36:03.0 +0100 +++ /var/tmp/diff_new_pack.jDnp3U/_new 2011-12-06 19:36:03.0 +0100 @@ -20,7 +20,7 @@ Name: sdparm Version:1.06 Release:1 -License:BSD3c +License:BSD-3-Clause Summary:List or change SCSI disk parameters Url:http://www.torque.net/sg/sdparm.html Group: Hardware/Other -- To unsubscribe, e-mail: opensuse-commit+unsubscr...@opensuse.org For additional commands, e-mail: opensuse-commit+h...@opensuse.org
commit sdparm for openSUSE:Factory
Hello community, here is the log from the commit of package sdparm for openSUSE:Factory checked in at Wed May 25 09:44:39 CEST 2011. --- sdparm/sdparm.changes 2010-08-13 12:12:33.0 +0200 +++ /mounts/work_src_done/STABLE/sdparm/sdparm.changes 2011-05-24 17:37:40.0 +0200 @@ -1,0 +2,18 @@ +Tue May 24 17:31:45 CEST 2011 - dims...@opensuse.org + +- Update to version 1.06: + + allow upper and lower case in field, (mode and vpd) page, +vendor, transport or command matching + + control mode page: add ATMPE and RWWP fields (spc4r27) + + extended inquiry vpd page: add extended self test completion +minutes field (spc4r27) + + power control mode page: PM_BG_PRECEDENCE field (spc4r24) +- FIDCPC, FSBCPC, FSTCPC fields (spc4r25) + + sbc3r25 renames 'thin' provisioning' to 'logical block +provisioning'; changes mode+vpd page and field names +- add Application tag mode page +- add SITPUA bit to logical block provisioning mode page + + fix '-eal' problem with vendor pages + + point svn:externals to rev 334 of sg3_utils + +--- calling whatdependson for head-i586 Old: sdparm-1.05.tar.bz2 New: sdparm-1.06.tar.bz2 Other differences: -- ++ sdparm.spec ++ --- /var/tmp/diff_new_pack.N6Dore/_old 2011-05-25 09:44:12.0 +0200 +++ /var/tmp/diff_new_pack.N6Dore/_new 2011-05-25 09:44:12.0 +0200 @@ -1,7 +1,7 @@ # -# spec file for package sdparm (Version 1.05) +# spec file for package sdparm # -# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -18,7 +18,7 @@ Name: sdparm -Version:1.05 +Version:1.06 Release:1 License:BSD3c Summary:List or change SCSI disk parameters ++ sdparm-1.05.tar.bz2 -> sdparm-1.06.tar.bz2 ++ 12153 lines of diff (skipped) retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sdparm-1.05/ChangeLog new/sdparm-1.06/ChangeLog --- old/sdparm-1.05/ChangeLog 2010-04-13 15:43:53.0 +0200 +++ new/sdparm-1.06/ChangeLog 2010-10-31 20:29:24.0 +0100 @@ -2,6 +2,21 @@ the rpm spec file: sdparm.spec ; the debian/changelog file; and the configure.ac file (in the AC_INIT item). +ChangeLog for sdparm-1.06 [20101031] [svn: r166] + - allow upper and lower case in field, (mode and vpd) page, +vendor, transport or command matching + - control mode page: add ATMPE and RWWP fields (spc4r27) + - extended inquiry vpd page: add extended self test +completion minutes field (spc4r27) + - power control mode page: PM_BG_PRECEDENCE field (spc4r24) +- FIDCPC, FSBCPC, FSTCPC fields (spc4r25) + - sbc3r25 renames 'thin' provisioning' to 'logical block +provisioning'; changes mode+vpd page and field names +- add Application tag mode page +- add SITPUA bit to logical block provisioning mode page + - fix '-eal' problem with vendor pages + - point svn:externals to rev 334 of sg3_utils + ChangeLog for sdparm-1.05 [20100413] [svn: r149] - add '--readonly' option especially for '-C start' and '-C stop' on ATA disks. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sdparm-1.05/README new/sdparm-1.06/README --- old/sdparm-1.05/README 2010-04-13 15:43:53.0 +0200 +++ new/sdparm-1.06/README 2010-10-31 20:29:24.0 +0100 @@ -230,4 +230,4 @@ Douglas Gilbert -13th April 2010 +31st October 2010 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/sdparm-1.05/config.h.in new/sdparm-1.06/config.h.in --- old/sdparm-1.05/config.h.in 2010-03-29 03:31:06.0 +0200 +++ new/sdparm-1.06/config.h.in 2010-09-21 03:20:12.0 +0200 @@ -30,6 +30,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the