Hello folks!
I´m just trying to find out how to get my Broadcom-WLAN on my Asus A2D Laptop
working. As this is the first version with the bcm43xxx-module integrated in
the kernel I have no experience in setting up wireless networks on Linux. So
I asume I´m doing something wrong.
What I did:
I updated today from a fresh beta2 to RC1 from a local directory (yum-repo).
I tried to setup the card in yast:
-I choosed the networkmanager-method.
-e.g I chosed : "start at boot" instead of "start when cable is plugged in"
which was the original state after installation.
then I tried to start the connection via Knetwormanager-applet.
From the other OS I know :
Authentfication:open
key: WEP
Result: The statusbar grows up to 28% (Status Gerätekonfiguration) and then
stagnates.
What can I do? / What is the prefered Way to do this ?
I would really be happy if I can get some help to get this working
Peter Buschbacher
Following:
some of the output of dmesg:
first part bootprocess, last part one try with knetworkmanager I think.
Linux version 2.6.18.2-23-default ([EMAIL PROTECTED]) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Tue Nov 21 12:59:21 UTC 2006
[...]
ACPI: PCI Interrupt :00:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
bcm43xx: Chip ID 0x4306, rev 0x3
bcm43xx: Number of cores: 5
bcm43xx: Core 0: ID 0x800, rev 0x4, vendor 0x4243, enabled
bcm43xx: Core 1: ID 0x812, rev 0x5, vendor 0x4243, disabled
bcm43xx: Core 2: ID 0x80d, rev 0x2, vendor 0x4243, enabled
bcm43xx: Core 3: ID 0x807, rev 0x2, vendor 0x4243, disabled
bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243, enabled
bcm43xx: PHY connected
bcm43xx: Detected PHY: Version: 2, Type 2, Revision 2
bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2)
bcm43xx: Radio turned off
bcm43xx: Radio turned off
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 15
[...]
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
eth0: Media Link On 100mbps full-duplex
NET: Registered protocol family 17
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
NET: Registered protocol family 4
ax25: module not supported by Novell, setting U taint flag.
NET: Registered protocol family 3
NET: Registered protocol family 5
SoftMAC: ASSERTION FAILED (0) at:
net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate()
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: Canceling existing associate request!
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
SoftMAC: ASSERTION FAILED (0) at:
net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80211softmac_wx_get_rate()
bcm43xx: PHY connected
bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load
failed.
bcm43xx: core_up for active 802.11 core failed (-2)
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: ASSERTION FAILED (0) at:
net/ieee80211/softmac/ieee80211softmac_wx.c:306:ieee80