Hello,
Thank you for your response.
I have never attempted to fiddle with routers, so I would appriciate
you baring with me through this process
On Sun, 22 Feb 2015 21:18:52 +0100
Daniel Golle dan...@makrotopia.org wrote:
Hi Genghis,
On Sun, Feb 22, 2015 at 04:16:02PM +0100, Genghis Khan wrote:
Is WiFi of Siemens Gigaset 604 IL supported yet?
Wifi (ath9k connected via EBU) works from the PCI side of things,
the only problem back then was the Wifi EEPROM (and simulatous
use of the NOR flash, which isn't tragic as NOR is used only
to store U-Boot as far as I remember...)
From what I remember, unlike most other devices, the EEPROM is not
stored in a separate MTD partition (art), but seems to either be
built-into the driver on the stock firmware or a file on filesystem
(which I didn't bother looking for as it would anyway be very hard
to extract it when migrating from the stock firmware...)
I'm not sure about that, as it's all years ago and I no longer
carry the hardware or firmware dumps with me...
I got Wifi working by using EEPROM from another board with similar
ath9k wifi chip, however, this is not a clean and/or redistributable
solution to the problem :(
I'm a Linux user and this isn't my primary router, so please feel
free to direct me towards compile instructions and pass any .diffs
you might need me to test out.
The board is very similar to
http://wiki.openwrt.org/toh/bt/homehub_v2b
So your best bet is to see how things are done there.
As by now there are many other devices based on the same SoC which
also got ath9k and are reported to work, you chances are quite good
to get things working.
Including WiFi, that is, correct?
I also remember that U-Boot lacked proper support for the NAND back
then which left booting via TFTP as the only practical option to
load stuff back then.
This also seems to be fixed in uboot-lantiq by know...
I'd be interested to know the results and are happy to assist you
as good as I can if needed.
How would you like to continue this discussion? (by Email, privately,
or in forum)
Cheers
Daniel
--
Ekiga 5 – Progress Report
http://blog.ekiga.net/?p=201
Are you interested in helping?
Ekiga needs you!
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
