Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
2014-11-27 23:55 GMT-07:00 Rafał Miłecki : > On 28 November 2014 at 04:39, Alex Henrie wrote: >> 2014-11-27 7:50 GMT-07:00 SGT. Garcia : >>> Michael and Alex are sending me USB<->COM cable and USB port[?] to get the >>> serial console going. >> >> I just sent you the following: >> >> http://www.amazon.ca/dp/B00AHYJWWG (USB/RS-232 converter with LEDs) >> http://www.amazon.ca/dp/B00MJUBKQ2 (cheap DB-9 cable to cut up and solder) >> >> There are obviously multiple ways to make this work, I'm just sending >> you the hardware that I would use if I did it myself. > > You are not going to use RS-232 serial console with your router... > right? Or are you trying to fry it on purpose? After I ordered it, I started wondering about the voltage levels...thanks for pointing out my mistake. I've canceled the order. Michael: At this point I think it would be best if you just sent SGT one of your cheap & simple converters as you suggested. -Alex ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On 28 November 2014 at 04:39, Alex Henrie wrote: > 2014-11-27 7:50 GMT-07:00 SGT. Garcia : >> Michael and Alex are sending me USB<->COM cable and USB port[?] to get the >> serial console going. > > I just sent you the following: > > http://www.amazon.ca/dp/B00AHYJWWG (USB/RS-232 converter with LEDs) > http://www.amazon.ca/dp/B00MJUBKQ2 (cheap DB-9 cable to cut up and solder) > > There are obviously multiple ways to make this work, I'm just sending > you the hardware that I would use if I did it myself. You are not going to use RS-232 serial console with your router... right? Or are you trying to fry it on purpose? http://wiki.openwrt.org/doc/hardware/port.serial#voltage.levels You got a link to the simply & cheap USB <-> TTL UART converter on ebay... -- Rafał ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
2014-11-27 7:50 GMT-07:00 SGT. Garcia : > Michael and Alex are sending me USB<->COM cable and USB port[?] to get the > serial console going. I just sent you the following: http://www.amazon.ca/dp/B00AHYJWWG (USB/RS-232 converter with LEDs) http://www.amazon.ca/dp/B00MJUBKQ2 (cheap DB-9 cable to cut up and solder) There are obviously multiple ways to make this work, I'm just sending you the hardware that I would use if I did it myself. Happy Thanksgiving! -Alex ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On Nov 27 07:04 +0100, Rafał Miłecki wrote: > On 26 November 2014 at 23:41, SGT. Garcia wrote: > > On Nov 19 18:43 +0100, Rafał Miłecki wrote: > >> On 12 November 2014 21:59, Alex Henrie wrote: > >> > 2014-11-11 23:51 GMT-07:00 Rafał Miłecki : > >> >> On 11 November 2014 23:26, Alex Henrie wrote: > >> >>> Is no one interested? Come on, I'm offering free hardware to play with > >> >>> ;-) > >> >> > >> >> I already have about 10-20 Broadcom based boars in my drawer ;) Not > >> >> that excited with another one. > >> >> > >> >> However I'd be happy to help adding support for WNR1000 v3. Could you > >> >> attach serial console to it and test some patched OpenWrt builds? > >> > > >> > It sounds like a fun project, but SGT. Garcia > >> > volunteered to work on it, and I have already mailed the device to > >> > him. I'm sure SGT. Garcia will contact you for help once he receives > >> > the device. Thanks for your work on OpenWrt! > >> > >> Could you provide us NVRAM dump once you get this device? You have > >> access to "nvram show" command in both: CFE and original firmware I > >> believe. > > > > first question, do i absolutely need a serial console to get an interface > > with CFE? i tried telnetenable from NetGearTelnetEnable and it did work so > > far as establishing connection with no prompt. so i couldn't run any > > command (nvram show) at that point. > > Yes. CFE doesn't implement ssh/telnet, so serial console is the way to > talk with it. Plus you need serial console to watch OpenWrt booting > process, so we can what goes wrong. > Michael and Alex are sending me USB<->COM cable and USB port[?] to get the serial console going. > > then made a cardinal mistake of > > upgrading the firmware and now it refuses to allow telnet connection. i > > might be able to roll back the firmware. > > You mean upgrading to the latest Netgear firmware? Well, it doesn't > matter if they disabled telnet server in it. We don't really telnet > access to the Netgear's firmware. > i see... i was just going by the wiki. > > the default firmware does provide upgrading from it's GUI interface and i'm > > hoping to try the img you suggested in the thread to see if i can get a > > partially working openwrt (mainly telnet/ssh/shell prompt) and take it from > > there. > > First provide me NVRAM dump, so I can add support for WNR1000 v3. > Don't try to install OpenWrt before me doing that. > > -- > Rafał noted, sure. SG. Garcia ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On 26 November 2014 at 23:41, SGT. Garcia wrote: > On Nov 19 18:43 +0100, Rafał Miłecki wrote: >> On 12 November 2014 21:59, Alex Henrie wrote: >> > 2014-11-11 23:51 GMT-07:00 Rafał Miłecki : >> >> On 11 November 2014 23:26, Alex Henrie wrote: >> >>> Is no one interested? Come on, I'm offering free hardware to play with >> >>> ;-) >> >> >> >> I already have about 10-20 Broadcom based boars in my drawer ;) Not >> >> that excited with another one. >> >> >> >> However I'd be happy to help adding support for WNR1000 v3. Could you >> >> attach serial console to it and test some patched OpenWrt builds? >> > >> > It sounds like a fun project, but SGT. Garcia >> > volunteered to work on it, and I have already mailed the device to >> > him. I'm sure SGT. Garcia will contact you for help once he receives >> > the device. Thanks for your work on OpenWrt! >> >> Could you provide us NVRAM dump once you get this device? You have >> access to "nvram show" command in both: CFE and original firmware I >> believe. > > first question, do i absolutely need a serial console to get an interface > with CFE? i tried telnetenable from NetGearTelnetEnable and it did work so > far as establishing connection with no prompt. so i couldn't run any > command (nvram show) at that point. Yes. CFE doesn't implement ssh/telnet, so serial console is the way to talk with it. Plus you need serial console to watch OpenWrt booting process, so we can what goes wrong. > then made a cardinal mistake of > upgrading the firmware and now it refuses to allow telnet connection. i > might be able to roll back the firmware. You mean upgrading to the latest Netgear firmware? Well, it doesn't matter if they disabled telnet server in it. We don't really telnet access to the Netgear's firmware. > the default firmware does provide upgrading from it's GUI interface and i'm > hoping to try the img you suggested in the thread to see if i can get a > partially working openwrt (mainly telnet/ssh/shell prompt) and take it from > there. First provide me NVRAM dump, so I can add support for WNR1000 v3. Don't try to install OpenWrt before me doing that. -- Rafał ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
Russell Senior wrote: > Everyone should have one. At this price (or similar), there isn't a > good reason to not have several: > http://www.ebay.com/itm/USB-To-RS232-TTL-UART-PL2303HX-Auto-Converter-USB-to-COM-Cable-Adapter-Module-/310676792112 > ... particularly if you've got some lead time, since coming from china > might mean you need to wait a while. And if you are near Ottawa, ON (Toronto, Montreal), I bought like 30 of them, and I'd be happy to mail you one, since they fit in a standard Canada Post envelope. Unicast me. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
> "SGT" == SGT Garcia writes: SGT> first question, do i absolutely need a serial console to get an SGT> interface with CFE? [...] SGT> [...] this all has to wait for a while though. i can get back to this SGT> towards the end of December when i have more time. in the mean time SGT> please keep your ideas/suggestions coming. thanks for the help. Everyone should have one. At this price (or similar), there isn't a good reason to not have several: http://www.ebay.com/itm/USB-To-RS232-TTL-UART-PL2303HX-Auto-Converter-USB-to-COM-Cable-Adapter-Module-/310676792112 ... particularly if you've got some lead time, since coming from china might mean you need to wait a while. -- Russell Senior, President russ...@personaltelco.net ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On Nov 19 18:43 +0100, Rafał Miłecki wrote: > Hi Garcia, > > Could you provide us NVRAM dump once you get this device? You have > access to "nvram show" command in both: CFE and original firmware I > believe. > > -- > Rafał oh and i don't see (couldn't find) where i can run 'nvram show' in the original firmware (netgear genie). someone here might know? ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On Nov 19 18:43 +0100, Rafał Miłecki wrote: > On 12 November 2014 21:59, Alex Henrie wrote: > > 2014-11-11 23:51 GMT-07:00 Rafał Miłecki : > >> On 11 November 2014 23:26, Alex Henrie wrote: > >>> Is no one interested? Come on, I'm offering free hardware to play with ;-) > >> > >> I already have about 10-20 Broadcom based boars in my drawer ;) Not > >> that excited with another one. > >> > >> However I'd be happy to help adding support for WNR1000 v3. Could you > >> attach serial console to it and test some patched OpenWrt builds? > > > > It sounds like a fun project, but SGT. Garcia > > volunteered to work on it, and I have already mailed the device to > > him. I'm sure SGT. Garcia will contact you for help once he receives > > the device. Thanks for your work on OpenWrt! > > Hi Garcia, > > Could you provide us NVRAM dump once you get this device? You have > access to "nvram show" command in both: CFE and original firmware I > believe. > > -- > Rafał hi Rafał, first question, do i absolutely need a serial console to get an interface with CFE? i tried telnetenable from NetGearTelnetEnable and it did work so far as establishing connection with no prompt. so i couldn't run any command (nvram show) at that point. then made a cardinal mistake of upgrading the firmware and now it refuses to allow telnet connection. i might be able to roll back the firmware. the default firmware does provide upgrading from it's GUI interface and i'm hoping to try the img you suggested in the thread to see if i can get a partially working openwrt (mainly telnet/ssh/shell prompt) and take it from there. this all has to wait for a while though. i can get back to this towards the end of December when i have more time. in the mean time please keep your ideas/suggestions coming. thanks for the help. SGT. Garcia ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On Nov 12 13:59 -0700, Alex Henrie wrote: > 2014-11-11 23:51 GMT-07:00 Rafał Miłecki : > > On 11 November 2014 23:26, Alex Henrie wrote: > >> Is no one interested? Come on, I'm offering free hardware to play with ;-) > > > > I already have about 10-20 Broadcom based boars in my drawer ;) Not > > that excited with another one. > > > > However I'd be happy to help adding support for WNR1000 v3. Could you > > attach serial console to it and test some patched OpenWrt builds? > > It sounds like a fun project, but SGT. Garcia > volunteered to work on it, and I have already mailed the device to > him. I'm sure SGT. Garcia will contact you for help once he receives > the device. Thanks for your work on OpenWrt! > > -Alex Alex, it's here; in fact it might have been in the mailbox for 1 or 2 days. many thanks. Rafał, i'll post the nvram content tomorrow (12-18 hours from now). SGT. Garcia ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On 20 November 2014 at 23:19, Rafał Miłecki wrote: > On 20 November 2014 18:03, Kristjan Onu wrote: >> I am attaching the output of nvram show from a WGR614v10. I think it is very >> similar to the WNR1000v3. >> >> Please let me know if you have any questions. > > Could you send e-mails as text/plain, please? > > I've commited changes that should fix/improve WGR614 V10 situation, see: > https://dev.openwrt.org/changeset/43336/ > > Could you try booting OpenWrt version with these patches included? And > provide us a boot log, please? Serial console may be required of > course. There is already a ready build you can try to install, see: http://downloads.openwrt.org/snapshots/trunk/brcm47xx.mips74k/ (please remember to attach serial console and grab the boot log) -- Rafał ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On 20 November 2014 18:03, Kristjan Onu wrote: > I am attaching the output of nvram show from a WGR614v10. I think it is very > similar to the WNR1000v3. > > Please let me know if you have any questions. Could you send e-mails as text/plain, please? I've commited changes that should fix/improve WGR614 V10 situation, see: https://dev.openwrt.org/changeset/43336/ Could you try booting OpenWrt version with these patches included? And provide us a boot log, please? Serial console may be required of course. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
Hello Rafał and others, Could you provide us NVRAM dump once you get this device? I am attaching the output of nvram show from a WGR614v10. I think it is very similar to the WNR1000v3. Please let me know if you have any questions. Regards, Kristjan $ telnet 192.168.1.1 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. BusyBox v0.60.0 (2012.09.18-10:09+) Built-in shell (msh) Enter 'help' for a list of built-in commands. # nvram show wan2_dns= wlan_acl_dev24= wl_radius_port=1812 wlan_acl_dev25= gui_check_enable=1 wan_unit=0 wlan_acl_dev26= wla_ssid_2=NETGEAR-Guest wl0_wmf_bss_enable=0 wlan_acl_dev27= wan_route= wlan_acl_dev28= wla_temp_ssid=NETGEAR as_genie=0 wl0_frameburst=on pppoe2_keepalive=0 wlan_acl_dev29= wla_region=11 wl_txstreams=0 bs_trustedip=192.168.1.0 wla_wmm_advert_2=1 bs_keywords= potValue=4320 wla_repeater=0 auto_enable=1 log_ipaddr= wla_temp_temp_broadcast=ssid_bc bs_enable=0 sel_region=0 boardrev=0x1403 wan2_gateway=0.0.0.0 il0macaddr=C0:3F:0E:61:4B:1E wl0.14_hwaddr=C2:3F:0E:61:4B:1C br0_ifnames=vlan2 eth1 wl_nctrlsb=none telnet_enable=0 wl_version=5.10.56.62 gui_Internet_state=0 wl0_leddc=0x64 et0macaddr=C0:3F:0E:61:4B:1E wla_temp_key1= ddns_enable=0 wla_temp_key2= wla_temp_passphrase= wiz_dhcp_wait_time=5 pppoe2_east_username=guest@flets pppoe2_bs_keyword= wla_temp_key3= traffic_enable=0 wl0_radarthrs=0 0x6a8 0x6c8 0x6ac 0x6c7 wla_temp_key4= wl_maxassoc=128 wl0_akm= watchdog=3000 boot_wait=off wla_sec_profile_enable_2=0 wl_phytypes= wl_leddc=0x64 wps_modelname=WGR614v10 pptp_idletime=5 wl0_infra=1 traffic_restart_hour=00 pppoe_localnetmask=... gui_Wireless_Radio_state=none et0mdcport=0 fw_disable=0 pppoe_tmp_mtu=1454 wl0_country_code=US pppoe_keepalive=1 wps_aplockdown_ageout=300 emf_rtport_entry= wps_config_command=0 ddns_wildcard=0 wla_wds_ptp_mac= wl_infra=1 rip_multicast=1 reset_gpio=3 run_test=0 wl0_bcn_rotate=1 pmon_ver=CFE 5.10.56.46 wlan_acl_dev30= first_wan_status=0 wlan_acl_dev31= restore_defaults=0 vlan2ports=0 1 2 3 5* wlan_acl_dev32= wl0.1_hwaddr=C2:3F:0E:61:4B:1F wlan_acl_dev33= wlan_acl_dev34= wl0_wme_sta_be=15 1023 3 0 0 off off wan_lease=86400 wlan_acl_dev35= wla_temp_sec_profile_enable_2= str_tbl_non_en_tag= wl0_nctrlsb=none wl0_version=5.10.56.62 wlan_acl_dev36= wl_wme_apsd=on str_tbl_non_en_ver= activeuser_ip= http_wanport= wlan_acl_dev37= wl_radius_ipaddr= ddns_hostname= bs_trustedip_temp=192.168.1.0 wl0.7_hwaddr=C2:3F:0E:61:4B:15 wan2_netmask=0.0.0.0 wlan_acl_dev38= wl0_ifname=eth1 wlan_acl_dev39= wla_key3_2= upnp_DHCPServerConfigurable=1 qos_rule_count=-1 ofdm2gpo=0x8822 lan_domain= pppoe2_bs_enable=0 wl0_wme_sta_bk=15 1023 7 0 0 off off timer_interval=3600 lan1_ipaddr=192.168.2.1 wl_net_reauth=36000 pptp_username= wl0_rxstreams=0 pppoe_mtu=1492 wla_temp_enable=enable_ap upnp_advert_period=30 second_wan_status=0 lan_route= wl0.1_wps_mode=disabled wl0_mrate=0 schedule_daylightadjust=0 wps_device_pin=42681847 fw_email_email_enable=0 wan_gateway=0.0.0.0 wla_secu_type=None wps_lan_led=0 gui_GuestNetwork_sec_profile=none wl0_mode=ap wan2_dns1= dhcp_start=192.168.1.2 mcs2gpo0=0x wan_hwaddr_sel=0 mcs2gpo1=0xaaa2 lan1_route= pppoe2_bs_keywords= wl0_ap_isolate=0 wl_msglevel=0x1 mcs2gpo2=0x8000 ntp_update_interval=86400 dhcp_end=192.168.1.254 auto_conn_24hr=Disable wl_mrate=0 traffic_warning_state=0 mcs2gpo3=0xccc8 wla_temp_ssid_2= wl_wmf_bss_enable=0 wl_akm= show_firmware_info=0 wl0.15_hwaddr=C2:3F:0E:61:4B:1D wl0_wme_no_ack=off wl0_ampdu=auto wl0_gmode=1 sromrev=3 qos_l7_apps=5:3 6:3 3:0 2:0 4:0 1:0 wla_allow_access_2=0 wla_temp_region=11 wla_wds_enable=0 boardtype=0x0505 pppoe2_mtu=1454 pppoe2_demand=0 pptp_passwd= aa2g=3 is_default=1 wla_autochannel=enable wl_wme_bss_disable=0 wl_ampdu_rr_rtylimit_tid=2 2 2 2 2 2 2 2 wl0.1_wme_bss_disable=0 wl0_nband=2 et1macaddr=C0:3F:0E:61:4B:1F wl_gmode=1 wl_ampdu=auto wps_uuid=0x7396027a6636acda33ca4a160b9f153c wps_perm_lock=0 wan_status=down wps_start=none stats_server= wlan_acl_dev40= traffic_cntime_monthly_limit=0 static_route= wlan_acl_dev41= wla_auth_type=automatic wl0_nreqd=0 wlan_acl_dev42= bs_enable_temp=0 ver_check_ftp_password=WGR614v10@ lan_netmask=255.255.255.0 wlan_acl_dev43= ver_check_enable=1 wl0_wme_txp_be=7 3 4 2 0 lan1_ifname= wlan_acl_dev44= wl_nband=2 wan_ipaddr_old=0.0.0.0 lan1_hwnames= pppoe2_west_passwd=flets wlan_acl_dev45= http_username=admin wl_wme_sta_vi=7 15 2 6016 3008 off off LangTagChinese=0 wl0_ssid=NETGEAR wl0_dtim=2 wlan_acl_dev46= super_passwd=Geardog wla_ap_isolate=0 wlan_acl_dev47= wl_nreqd=0 wl_wme_ap_be=15 63 3 0 0 off off wl0_dfs_preism=60 os_date=Sep 18 2012 pppoe_tmp_servicename= wlan_acl_dev48= http_rmenable=0 pptp_serv_ip=10.0.0.138 pppoe_user_ip=... access_mac_record=78-D6-F0-33-7E-B5 wla_wps_tmp_lock_flag=0 wlan_acl_dev49= wl0_wme_txp_bk=7 3 4 2 0 http_lanport=80 wl_plcphdr=long wl_wme_sta_vo=3 7 2 3264 1504 off off lan1_wins= wl_macmode=disabled wl_mimo_preamble=gfbcm wan_hwaddr2=C0:3F:0E:61:4B:1F wan_hwname= wan_domain= wlan_acl_d
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On Nov 19 18:43 +0100, Rafał Miłecki wrote: > Hi Garcia, > > Could you provide us NVRAM dump once you get this device? You have > access to "nvram show" command in both: CFE and original firmware I > believe. > > -- > Rafał will do. SGT. Garcia ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On 12 November 2014 21:59, Alex Henrie wrote: > 2014-11-11 23:51 GMT-07:00 Rafał Miłecki : >> On 11 November 2014 23:26, Alex Henrie wrote: >>> Is no one interested? Come on, I'm offering free hardware to play with ;-) >> >> I already have about 10-20 Broadcom based boars in my drawer ;) Not >> that excited with another one. >> >> However I'd be happy to help adding support for WNR1000 v3. Could you >> attach serial console to it and test some patched OpenWrt builds? > > It sounds like a fun project, but SGT. Garcia > volunteered to work on it, and I have already mailed the device to > him. I'm sure SGT. Garcia will contact you for help once he receives > the device. Thanks for your work on OpenWrt! Hi Garcia, Could you provide us NVRAM dump once you get this device? You have access to "nvram show" command in both: CFE and original firmware I believe. -- Rafał ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
2014-11-11 23:51 GMT-07:00 Rafał Miłecki : > On 11 November 2014 23:26, Alex Henrie wrote: >> Is no one interested? Come on, I'm offering free hardware to play with ;-) > > I already have about 10-20 Broadcom based boars in my drawer ;) Not > that excited with another one. > > However I'd be happy to help adding support for WNR1000 v3. Could you > attach serial console to it and test some patched OpenWrt builds? It sounds like a fun project, but SGT. Garcia volunteered to work on it, and I have already mailed the device to him. I'm sure SGT. Garcia will contact you for help once he receives the device. Thanks for your work on OpenWrt! -Alex ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
On 11 November 2014 23:26, Alex Henrie wrote: > Is no one interested? Come on, I'm offering free hardware to play with ;-) I already have about 10-20 Broadcom based boars in my drawer ;) Not that excited with another one. However I'd be happy to help adding support for WNR1000 v3. Could you attach serial console to it and test some patched OpenWrt builds? -- Rafał ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
Is no one interested? Come on, I'm offering free hardware to play with ;-) -Alex 2014-11-01 18:55 GMT-06:00 Alex Henrie : > Hi, > > I have an extra Netgear N150 WNR1000 v3 (FCC ID: PY309300117, IC: > 4054A-09300117). WikiDevi says that it has 4 MiB of flash memory. > > Is anyone interested in working on OpenWrt support for this router? If > so, I'll give it to you for free, just tell me where to mail it to. > > -Alex ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] I'd like to donate a Netgear N150 WNR1000 v3
Hi, I have an extra Netgear N150 WNR1000 v3 (FCC ID: PY309300117, IC: 4054A-09300117). WikiDevi says that it has 4 MiB of flash memory. Is anyone interested in working on OpenWrt support for this router? If so, I'll give it to you for free, just tell me where to mail it to. -Alex ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel