The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Software version:
soft_ver:1.0.0 Build 20211202 Rel. 69482
Partition table:
0004 fs-uboot
0004 0040 os-image
0044 00b6 file-system
00fa 0300 default-mac
00fa0300 0100 device-id
00fa0400 fc00 product-info
00fb 4000 group-info
00fb4000 c000 user-config
00fc 0001 device-config
00fd 0001 default-config
00fe 0800 partition-table
00fe0800 0100 soft-version
00fe0900 0200 support-list
00fe0b00 3000 profile
00fe3b00 0100 extra-para
00ff 0001 radio
`os-image` and `file-system` have been merged into `firmware`.
Signed-off-by: Mark Ceeha
---
v2:
- Change `soft_ver` to 1.0.0; while the TP-Link stock firmware cares
about the version and if it's not older than the current `soft_ver`,
it will not allow you to flash OpenWrt anyway as the image is not signed.
U-Boot accepts unsigned images, and does not care about the `soft_ver`,
so we'll just make it consistent with the initial firmware release
this partition table was checked against.
- Fix style issues pointed out by Sander.
---
src/tplink-safeloader.c | 37 +
1 file changed, 37 insertions(+)
diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index ddb5dff..d9e1605 100644
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -1612,6 +1612,42 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system",
},
+ /** Firmware layout for the Deco M4R v4 */
+ {
+ .id = "DECO-M4R-V4",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+
"{product_name:M4R,product_ver:4.0.0,special_id:5553}\n"
+
"{product_name:M4R,product_ver:4.0.0,special_id:4555}\n"
+
"{product_name:M4R,product_ver:4.0.0,special_id:4A50}\n"
+
"{product_name:M4R,product_ver:4.0.0,special_id:4234}\n"
+
"{product_name:M4R,product_ver:4.0.0,special_id:5A47}\n",
+ .part_trail = 0x00,
+ .soft_ver = SOFT_VER_TEXT("soft_ver:1.0.0\n"),
+
+ .partitions = {
+ {"fs-uboot", 0x0, 0x4},
+ {"firmware", 0x4, 0xf6},
+ {"default-mac", 0xfa, 0x00300},
+ {"device-id", 0xfa0300, 0x00100},
+ {"product-info", 0xfa0400, 0x0fc00},
+ {"group-info", 0xfb, 0x04000},
+ {"user-config", 0xfb4000, 0x0c000},
+ {"device-config", 0xfc, 0x1},
+ {"default-config", 0xfd, 0x1},
+ {"partition-table", 0xfe, 0x00800},
+ {"soft-version", 0xfe0800, 0x00100},
+ {"support-list", 0xfe0900, 0x00200},
+ {"profile", 0xfe0b00, 0x03000},
+ {"extra-para", 0xfe3b00, 0x00100},
+ {"radio", 0xff, 0x1},
+ {NULL, 0, 0}
+ },
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the Deco S4 v2 */
{
.id = "DECO-S4-V2",
@@ -3525,6 +3561,7 @@ static void build_image(const char *output,
strcasecmp(info->id, "ARCHER-C60-V3") == 0 ||
strcasecmp(info->id, "ARCHER-C6U-V1") == 0 ||
strcasecmp(info->id, "ARCHER-C6-V3") == 0 ||
+ strcasecmp(info->id, "DECO-M4R-V4") == 0 ||
strcasecmp(info->id, "MR70X") == 0 ||
strcasecmp(info->id, "TLWR1043NV5") == 0) {
const uint8_t extra_para[2] = {0x01, 0x00};
--
2.39.0
--- End Message ---
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
