[linuxfoundation.org #62413] 答复: [OPNFV Helpdesk #62413] [opnfv-tech-discuss] docker image build fails on lf-build3

2018-10-22 Thread huangxiangyu via RT 
Hi Trevor

Thanks for the quick response ! All images have been built successfully now.

Thanks
Harry

-邮件原件-
发件人: Trevor Bramwell via RT [mailto:opnfv-helpd...@rt.linuxfoundation.org] 
发送时间: 2018年10月18日 11:57
收件人: huangxiangyu 
抄送: agard...@linuxfoundation.org; dmcbr...@linuxfoundation.org; 
opnfv-tech-discuss@lists.opnfv.org
主题: [OPNFV Helpdesk #62413] [opnfv-tech-discuss] docker image build fails on 
lf-build3

Hi Harry,

I've taken lf-build3 out of rotation for now, as we only brought it online to 
help with the build queue the other day.

This should make your builds get scheduled on ericsson-build4 or lf-build2 
where they've been successful in the past.

Regards,
Trevor Bramwell

On Wed Oct 17 20:32:13 2018, huangxiang...@huawei.com wrote:
> Hi Trevor
> 
> As Gambia branch is created, compass4nfv Gambia is supposed to use 
> docker images built from compass-containers Gambia branch. But somehow 
> building process always failed on lf-buld3.
> 
> In https://build.opnfv.org/ci/view/compass4nfv/job/compass-docker-
> gambia/
> you can find the build process of lf-build3 failed because of a 
> permission denied issue.
> Console output: https://build.opnfv.org/ci/job/compass-tasks-k8s-
> build-amd64-gambia/2/console
> 
> There are 7 images need to be built so it's hard to bypass lf-build3 
> to build all images.
> I didn't know the exact reason why this failure happened, can you help 
> to check this issue?
> 
> Thanks
> Harry




-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#22194): 
https://lists.opnfv.org/g/opnfv-tech-discuss/message/22194
Mute This Topic: https://lists.opnfv.org/mt/27486388/21656
Group Owner: opnfv-tech-discuss+ow...@lists.opnfv.org
Unsubscribe: https://lists.opnfv.org/g/opnfv-tech-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[linuxfoundation.org #62413] 答复: [OPNFV Helpdesk #62413] [opnfv-tech-discuss] docker image build fails on lf-build3

2018-10-22 Thread huangxiangyu via RT 
Hi Trevor

Sorry to bother you again but lf-build3 has blocked our build process again.
I'm wondering if this permission issue for lf-build3 can be solved permanently 
so we won't have to bother you anymore?

Thanks
Harry


-邮件原件-
发件人: Trevor Bramwell via RT [mailto:opnfv-helpd...@rt.linuxfoundation.org] 
发送时间: 2018年10月18日 11:57
收件人: huangxiangyu 
抄送: agard...@linuxfoundation.org; dmcbr...@linuxfoundation.org; 
opnfv-tech-discuss@lists.opnfv.org
主题: [OPNFV Helpdesk #62413] [opnfv-tech-discuss] docker image build fails on 
lf-build3

Hi Harry,

I've taken lf-build3 out of rotation for now, as we only brought it online to 
help with the build queue the other day.

This should make your builds get scheduled on ericsson-build4 or lf-build2 
where they've been successful in the past.

Regards,
Trevor Bramwell

On Wed Oct 17 20:32:13 2018, huangxiang...@huawei.com wrote:
> Hi Trevor
> 
> As Gambia branch is created, compass4nfv Gambia is supposed to use 
> docker images built from compass-containers Gambia branch. But somehow 
> building process always failed on lf-buld3.
> 
> In https://build.opnfv.org/ci/view/compass4nfv/job/compass-docker-
> gambia/
> you can find the build process of lf-build3 failed because of a 
> permission denied issue.
> Console output: https://build.opnfv.org/ci/job/compass-tasks-k8s-
> build-amd64-gambia/2/console
> 
> There are 7 images need to be built so it's hard to bypass lf-build3 
> to build all images.
> I didn't know the exact reason why this failure happened, can you help 
> to check this issue?
> 
> Thanks
> Harry




-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#22193): 
https://lists.opnfv.org/g/opnfv-tech-discuss/message/22193
Mute This Topic: https://lists.opnfv.org/mt/27486387/21656
Group Owner: opnfv-tech-discuss+ow...@lists.opnfv.org
Unsubscribe: https://lists.opnfv.org/g/opnfv-tech-discuss/unsub  
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[opnfv-tech-discuss] 答复: [Compass]Stepping down as Compass4nfv PTL

2018-05-14 Thread huangxiangyu 
Justin

It’s a pleasant and productive time when we are working together with you 
leading this project. You helped this project to grow in so many aspects but 
what impresses me most is your long-term vision which really set the tune for 
Compass project. Your contribution to this project is greatly appreciated.

I’m glad to accept the nomination, hope that I can fulfill this mission as well 
as you do !

Regards
Harry

发件人: opnfv-tech-discuss-boun...@lists.opnfv.org 
[mailto:opnfv-tech-discuss-boun...@lists.opnfv.org] 代表 Xueyifei (Yifei Xue)
发送时间: 2018年5月11日 4:36
收件人: Chigang (Justin) ; opnfv-tech-discuss 

主题: Re: [opnfv-tech-discuss] [Compass]Stepping down as Compass4nfv PTL

Hi Justin

It’s my honor to be under your leading. We have learned a lot from you not only 
technical stuff but also the way doing things. Thank you for your great work.

And due to his outstanding contribution in Compass4NFV, I’d like to nominate 
Harry Huang as the candidate of Compass PTL. He is an idea man and full of 
passion. I think Compass will keep going high with his leading.

Best Regards
Yifei Xue

From: 
opnfv-tech-discuss-boun...@lists.opnfv.org
 [mailto:opnfv-tech-discuss-boun...@lists.opnfv.org] On Behalf Of Chigang 
(Justin)
Sent: Thursday, May 10, 2018 9:14 PM
To: opnfv-tech-discuss
Subject: [opnfv-tech-discuss] [Compass]Stepping down as Compass4nfv PTL

Hi,

I think it is time to step down Compass4nfv PTL for me.

I have been Compass4nfv PTL for 2 release, because other tasks in my company 
occupied me too much time, I have few code contribution in Compass project in 
latest release.
I am very glad that each committer now, they give a great code contribution and 
new feature delivery in Fraser release. I would like to thank each committer 
and every contributors in Compass.
Thanks for your great work and let Compass move on ahead. I think you will make 
a greater achievement in future release.

With this mail, I would also like to kick off the nomination period for the new 
PTL. If each committer in Compass is interested in taking this role, please 
announce your nomination by replying to this mail.
The nomination period will be open until next Wednesday, May 16th, followed by 
a vote on Gerrit.

Regards
Justin

___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [Auto] Deploy kubernetes on ARM server using Compass4NFV

2018-02-27 Thread huangxiangyu 
Joe

K8s scenario has two ways to be deployed, baremetal deploy (install k8s on 3+2 
nodes) and virtual deploy (install k8s on VMs launched on jump server).The 
nodes and VMs number need not to be exactly 3+2, no ha is also supported.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月27日 22:37
收件人: huangxiangyu <huangxiang...@huawei.com>
抄送: mnavaneet...@mvista.com; eric.dm...@wipro.com; Tina Tsou 
<tina.t...@arm.com>; gerard.d...@wipro.com; opnfv-tech-discuss@lists.opnfv.org
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Harry,
  Is compass installing Openstack (aka OPNFV) on these 3+2 servers in the 
typical 3-node-HA controller and 2 compute nodes?
  Or is it installing k8s on the 5 nodes?

Thanks,
Joe
On Feb 27, 2018, at 2:03 AM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Joe

Maybe to use “Node” is more understandable here. Say a six servers’ cluster, 
there is a blade used as a jump server and other five blades will be nodes to 
host the infra layer. This is exactly how we deployed in our lab. So in the end 
six server will be one Ubuntu (jump host) and five CentOS (3+2 multi-node 
cluster).

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月27日 11:22
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
抄送: mnavaneet...@mvista.com<mailto:mnavaneet...@mvista.com>; 
eric.dm...@wipro.com<mailto:eric.dm...@wipro.com>; Tina Tsou 
<tina.t...@arm.com<mailto:tina.t...@arm.com>>; 
gerard.d...@wipro.com<mailto:gerard.d...@wipro.com>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Harry,
  I’m a little confused - what is the host OS?  If jump host is ubuntu, then 
what is the host that is running Centos?

Thanks,
Joe

On Feb 26, 2018, at 9:42 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Sorry, joe. I didn’t make it clear there. I mean the host OS can only be centos 
for now, the jump host OS compass installer requires is still Ubuntu. The 
build.sh will check the cpu architecture then build things accordingly. Here is 
a link of Jenkins output of k8 scenario on arm  for compass: 
https://build.opnfv.org/ci/job/container4nfv-k8-sriov-nofeature-noha-virtual-daily-master/24/consoleFull
 .  In this output aarch64 is used instead of amd64.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月26日 21:14
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
抄送: mnavaneet...@mvista.com<mailto:mnavaneet...@mvista.com>; 
eric.dm...@wipro.com<mailto:eric.dm...@wipro.com>; Tina Tsou 
<tina.t...@arm.com<mailto:tina.t...@arm.com>>;gerard.d...@wipro.com<mailto:gerard.d...@wipro.com>;
 opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Harry,
  Just re-read this and noticed I missed a big important thing.
  This supports only centos7 on arm, for now.

  My jump server is currently running ubuntu 16.04.
  I probably won’t tear the jump server down and re-deploy centos7 on it at 
this point.
  Does this use-case of Compass result in a VM being deployed?  I’m just 
curious if it’s worth trying this on a VM in my open stack environment.

Thanks,
Joe

On Feb 25, 2018, at 9:48 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Joe

OpenStack is not involved here, just install kubernetes on baremetal server. 
Compass supports both CentOS and Ubuntu in other scenarios but this scenario 
for ARM is relatively new and only support centos7 for now. Another thing is 
some servers may require dedicated OS, there is a yaml file to specify which 
exact OS will be built into compass tar ball then used during deploy process.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月24日 19:49
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
抄送: mnavaneet...@mvista.com<mailto:mnavaneet...@mvista.com>; 
eric.dm...@wipro.com<mailto:eric.dm...@wipro.com>; Tina Tsou 
<tina.t...@arm.com<mailto:tina.t...@arm.com>>;gerard.d...@wipro.com<mailto:gerard.d...@wipro.com>;
 opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Thanks, Harry.  That sounds pretty cool.

Does this install open stack as well?  Or does it just install k8s on an open 
stack environment?
Also, I see something that says “OS_VERSION=centos7” - is that what hosts the 
k8s master and node?

Thanks,
Joe

On Feb 24, 2018,

[opnfv-tech-discuss] 答复: [Auto] Deploy kubernetes on ARM server using Compass4NFV

2018-02-26 Thread huangxiangyu 
Joe

Maybe to use “Node” is more understandable here. Say a six servers’ cluster, 
there is a blade used as a jump server and other five blades will be nodes to 
host the infra layer. This is exactly how we deployed in our lab. So in the end 
six server will be one Ubuntu (jump host) and five CentOS (3+2 multi-node 
cluster).

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月27日 11:22
收件人: huangxiangyu <huangxiang...@huawei.com>
抄送: mnavaneet...@mvista.com; eric.dm...@wipro.com; Tina Tsou 
<tina.t...@arm.com>; gerard.d...@wipro.com; opnfv-tech-discuss@lists.opnfv.org
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Harry,
  I’m a little confused - what is the host OS?  If jump host is ubuntu, then 
what is the host that is running Centos?

Thanks,
Joe

On Feb 26, 2018, at 9:42 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Sorry, joe. I didn’t make it clear there. I mean the host OS can only be centos 
for now, the jump host OS compass installer requires is still Ubuntu. The 
build.sh will check the cpu architecture then build things accordingly. Here is 
a link of Jenkins output of k8 scenario on arm  for compass: 
https://build.opnfv.org/ci/job/container4nfv-k8-sriov-nofeature-noha-virtual-daily-master/24/consoleFull
 .  In this output aarch64 is used instead of amd64.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月26日 21:14
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
抄送: mnavaneet...@mvista.com<mailto:mnavaneet...@mvista.com>; 
eric.dm...@wipro.com<mailto:eric.dm...@wipro.com>; Tina Tsou 
<tina.t...@arm.com<mailto:tina.t...@arm.com>>; 
gerard.d...@wipro.com<mailto:gerard.d...@wipro.com>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Harry,
  Just re-read this and noticed I missed a big important thing.
  This supports only centos7 on arm, for now.

  My jump server is currently running ubuntu 16.04.
  I probably won’t tear the jump server down and re-deploy centos7 on it at 
this point.
  Does this use-case of Compass result in a VM being deployed?  I’m just 
curious if it’s worth trying this on a VM in my open stack environment.

Thanks,
Joe

On Feb 25, 2018, at 9:48 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Joe

OpenStack is not involved here, just install kubernetes on baremetal server. 
Compass supports both CentOS and Ubuntu in other scenarios but this scenario 
for ARM is relatively new and only support centos7 for now. Another thing is 
some servers may require dedicated OS, there is a yaml file to specify which 
exact OS will be built into compass tar ball then used during deploy process.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月24日 19:49
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
抄送: mnavaneet...@mvista.com<mailto:mnavaneet...@mvista.com>; 
eric.dm...@wipro.com<mailto:eric.dm...@wipro.com>; Tina Tsou 
<tina.t...@arm.com<mailto:tina.t...@arm.com>>;gerard.d...@wipro.com<mailto:gerard.d...@wipro.com>;
 opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Thanks, Harry.  That sounds pretty cool.

Does this install open stack as well?  Or does it just install k8s on an open 
stack environment?
Also, I see something that says “OS_VERSION=centos7” - is that what hosts the 
k8s master and node?

Thanks,
Joe

On Feb 24, 2018, at 2:16 AM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Hi team

Attachment is the guide of how to deploy kubernetes scenario on ARM server 
using compass installer. We have tested it in Huawei lab with a baremetal pod 
of six ARM servers.

Regards
Harry


___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [Auto] Deploy kubernetes on ARM server using Compass4NFV

2018-02-26 Thread huangxiangyu 
Sorry, joe. I didn’t make it clear there. I mean the host OS can only be centos 
for now, the jump host OS compass installer requires is still Ubuntu. The 
build.sh will check the cpu architecture then build things accordingly. Here is 
a link of Jenkins output of k8 scenario on arm  for compass: 
https://build.opnfv.org/ci/job/container4nfv-k8-sriov-nofeature-noha-virtual-daily-master/24/consoleFull
 .  In this output aarch64 is used instead of amd64.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月26日 21:14
收件人: huangxiangyu <huangxiang...@huawei.com>
抄送: mnavaneet...@mvista.com; eric.dm...@wipro.com; Tina Tsou 
<tina.t...@arm.com>; gerard.d...@wipro.com; opnfv-tech-discuss@lists.opnfv.org
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Harry,
  Just re-read this and noticed I missed a big important thing.
  This supports only centos7 on arm, for now.

  My jump server is currently running ubuntu 16.04.
  I probably won’t tear the jump server down and re-deploy centos7 on it at 
this point.
  Does this use-case of Compass result in a VM being deployed?  I’m just 
curious if it’s worth trying this on a VM in my open stack environment.

Thanks,
Joe

On Feb 25, 2018, at 9:48 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Joe

OpenStack is not involved here, just install kubernetes on baremetal server. 
Compass supports both CentOS and Ubuntu in other scenarios but this scenario 
for ARM is relatively new and only support centos7 for now. Another thing is 
some servers may require dedicated OS, there is a yaml file to specify which 
exact OS will be built into compass tar ball then used during deploy process.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月24日 19:49
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
抄送: mnavaneet...@mvista.com<mailto:mnavaneet...@mvista.com>; 
eric.dm...@wipro.com<mailto:eric.dm...@wipro.com>; Tina Tsou 
<tina.t...@arm.com<mailto:tina.t...@arm.com>>; 
gerard.d...@wipro.com<mailto:gerard.d...@wipro.com>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Thanks, Harry.  That sounds pretty cool.

Does this install open stack as well?  Or does it just install k8s on an open 
stack environment?
Also, I see something that says “OS_VERSION=centos7” - is that what hosts the 
k8s master and node?

Thanks,
Joe

On Feb 24, 2018, at 2:16 AM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Hi team

Attachment is the guide of how to deploy kubernetes scenario on ARM server 
using compass installer. We have tested it in Huawei lab with a baremetal pod 
of six ARM servers.

Regards
Harry


___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [Auto] Deploy kubernetes on ARM server using Compass4NFV

2018-02-25 Thread huangxiangyu 
Joe

OpenStack is not involved here, just install kubernetes on baremetal server. 
Compass supports both CentOS and Ubuntu in other scenarios but this scenario 
for ARM is relatively new and only support centos7 for now. Another thing is 
some servers may require dedicated OS, there is a yaml file to specify which 
exact OS will be built into compass tar ball then used during deploy process.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月24日 19:49
收件人: huangxiangyu <huangxiang...@huawei.com>
抄送: mnavaneet...@mvista.com; eric.dm...@wipro.com; Tina Tsou 
<tina.t...@arm.com>; gerard.d...@wipro.com; opnfv-tech-discuss@lists.opnfv.org
主题: Re: [opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using 
Compass4NFV

Thanks, Harry.  That sounds pretty cool.

Does this install open stack as well?  Or does it just install k8s on an open 
stack environment?
Also, I see something that says “OS_VERSION=centos7” - is that what hosts the 
k8s master and node?

Thanks,
Joe

On Feb 24, 2018, at 2:16 AM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Hi team

Attachment is the guide of how to deploy kubernetes scenario on ARM server 
using compass installer. We have tested it in Huawei lab with a baremetal pod 
of six ARM servers.

Regards
Harry


___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] [Auto] Deploy kubernetes on ARM server using Compass4NFV

2018-02-23 Thread huangxiangyu 
Hi team

Attachment is the guide of how to deploy kubernetes scenario on ARM server 
using compass installer. We have tested it in Huawei lab with a baremetal pod 
of six ARM servers.

Regards
Harry


k8s-deploy-arm.rst
Description: k8s-deploy-arm.rst
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [Auto] URL to access ONAP portal

2018-02-12 Thread huangxiangyu 
Joe

Containers have their internal IPs. In the /etc/hosts there are some name 
resolving to let you find the internal addresses of domains like 
portal.api.simpledemo.onap.org.

Regards
Harry

发件人: Joe Kidder [mailto:joe.kid...@5thlayer.com]
发送时间: 2018年2月13日 10:21
收件人: huangxiangyu <huangxiang...@huawei.com>
抄送: Tina Tsou <tina.t...@arm.com>; opnfv-tech-discuss@lists.opnfv.org
主题: Re: [opnfv-tech-discuss] [Auto] URL to access ONAP portal

Thanks, Harry.

I’m confused, however.  This browser page points to 
http://portal.api.simpledemo.onap.org:8989.
Shouldn’t I be connecting to a local IP address of the ONAP portal running on 
10.10.30.157?

Thanks,
Joe
On Feb 12, 2018, at 9:03 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:

Hi Joe

Here‘s the link to access ONAP portal built in pod1 of UNH Laas lab:
http://10.10.30.157:30211<http://10.10.30.157:30211/>
You will see a noVNC login page, password is “password”, then you will see a 
desktop and I already opened the browser so you should find the main page of 
ONAP portal just there.

This ONAP on Kubernetes is not connected to an OpenStack yet so I think most 
likely we have to tear down this ONAP and redeploy it when there is a VIM ready 
to be connected.
Sorry Gokul, I didn’t get your email address. Joe or Tina, can you help to add 
Gokul to this loop? thanks.
I will be on Chinese new year vacation during 2.14 to 2.22 but I will check the 
mail time to time, we can keep discussion on this thread.

Regards
Harry

___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] [Auto] URL to access ONAP portal

2018-02-12 Thread huangxiangyu 
Hi Joe

Here's the link to access ONAP portal built in pod1 of UNH Laas lab:
http://10.10.30.157:30211
You will see a noVNC login page, password is "password", then you will see a 
desktop and I already opened the browser so you should find the main page of 
ONAP portal just there.

This ONAP on Kubernetes is not connected to an OpenStack yet so I think most 
likely we have to tear down this ONAP and redeploy it when there is a VIM ready 
to be connected.
Sorry Gokul, I didn't get your email address. Joe or Tina, can you help to add 
Gokul to this loop? thanks.
I will be on Chinese new year vacation during 2.14 to 2.22 but I will check the 
mail time to time, we can keep discussion on this thread.

Regards
Harry
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [Auto][ONAP] Are there any tips for installing "DCAE-only" on OPNFV/OpenStack

2018-02-08 Thread huangxiangyu 
Hi joe

Have you try the tech discuss mail list of ONAP ?  I tried to look into the 
dace_vm_init.sh but all the api calls written in shell is really hard to 
read... Anyway I'm trying this 
https://onap.readthedocs.io/en/latest/submodules/dcaegen2.git/docs/sections/installation_manual.html?highlight=dcae
 installation guide now for instruction in readthedocs seems more up to date 
and better composed. Also let me know if you crack something, keep in touch.

Regards
Harry


-邮件原件-
发件人: opnfv-tech-discuss-boun...@lists.opnfv.org 
[mailto:opnfv-tech-discuss-boun...@lists.opnfv.org] 代表 Joe Kidder
发送时间: 2018年2月8日 4:47
收件人: OPNFV Tech 
主题: [opnfv-tech-discuss] [Auto][ONAP] Are there any tips for installing 
"DCAE-only" on OPNFV/OpenStack

Hi,
  I’m looking for pointers for installing DCAE on an Openstack environment for 
the Auto project.
  We’re installing most of ONAP on kubernetes, but DCAE is not quite ready (a 
couple of weeks out?) for deployment on k8s.  So, we’d like to install DCAE by 
itself (as much as possible) on an OPNFV bare metal pod’s open stack 
environment.

  I’m not very experienced with ONAP. I have done a couple of ONAP deployment 
attempts using the heat template, but am chasing a number of small issues.  My 
hope is that if I can limit the installation scope to just DCAE, then it’s a 
little easier to focus;)

  In the meantime, I’ll continue working on full ONAP install on openstack with 
the heat template.

Thanks!
Joe Kidder
Auto Project contributor
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] [Auto] developing Auto test case in LAAS lab

2017-10-23 Thread huangxiangyu 
Hi Madhukesh

If you are considering develop Auto test case using LAAS lab in UNH, I can help 
you with onap environment set up. Lincoln from UNH can help us to build the 
baremetal cluster like bryan illustrated. Let us know what you need.

Regards
Harry
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [Auto] Re: All pods are pending when setting up kubernetes

2017-10-18 Thread huangxiangyu 
The prepull_docker.sh works and I can see 7 green lines with Kubectl 
cluster-info. But kubernetes pods just keep pending. Parker would you please 
help to reinstall a Ubuntu 16.04 in this pod ? Maybe there is no such issue in 
ubuntu environment.

发件人: Michael O'Brien [mailto:frank.obr...@amdocs.com]
发送时间: 2017年10月18日 4:31
收件人: Tina Tsou <tina.t...@arm.com>; huangxiangyu <huangxiang...@huawei.com>; 
lylav...@iol.unh.edu; pberber...@iol.unh.edu
抄送: opnfv-tech-discuss@lists.opnfv.org; onap-disc...@lists.onap.org
主题: RE: [Auto] Re: All pods are pending when setting up kubernetes

Tina, Harry,
   It looks like your kubernetes pods under rancher are not up – they are all 
0/1 or 0/3 – in the instructions after setting up your kube client run
Kubectl cluster-info
– you should see all 7 green lines – errors usually means there are issues 
either with your file system or dns – are you running collocated (server/client 
on same machine – I think so right?)
  Also I need to update the meeting minutes with the demo video – I’ll post the 
time where I checked this during the demo.

For any image issues - could you verify that you ran the prepull_docker sh 
script from the page
https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-QuickstartInstallation

https://jira.onap.org/secure/attachment/10501/prepull_docker.sh

[https://jira.onap.org/images/icons/issuetypes/story.svg]OOM-328 - Preload 
docker images script before createAll.sh will allow 7 min startup IN 
PROGRESS<https://jira.onap.org/browse/OOM-328>

curl https://jira.onap.org/secure/attachment/10501/prepull_docker.sh > 
prepull_docker.sh
chmod 777 prepull_docker.sh
nohup ./prepull_docker.sh > prepull.log &


Then do the following to verify that at least all the docker images were pulled.
Docker images

After that try bringing up an independent component like onap-robot – this does 
not need anything else and can be used to verify your install

./createAll.bash –n onap –a onap-robot

/michael



From: Tina Tsou [mailto:tina.t...@arm.com]
Sent: Tuesday, October 17, 2017 13:21
To: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>; 
lylav...@iol.unh.edu<mailto:lylav...@iol.unh.edu>; 
pberber...@iol.unh.edu<mailto:pberber...@iol.unh.edu>
Cc: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: [Auto] Re: All pods are pending when setting up kubernetes

Include UNH Lab...


Thank you,
Tina

On Oct 16, 2017, at 11:33 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:
HI Michael

Currently I manage to bring up onap pods in our local lab and most of them are 
in running state. But there seem to be a rancher bug that block me in UNH lab.  
Everything seems fine and throws no error when I created rancher-agent. Somehow 
pods in kube-system just keep getting stuck in pending state. I check the 
docker images and even images for these pods are not pulled.
[root@pod1 ~]# kubectl get pods --all-namespaces -a
NAMESPACE NAME   READY STATUS
RESTARTS   AGE
kube-system   heapster-4285517626-8r16j  0/1   Pending   0  
20h
kube-system   kube-dns-638003847-hkn34   0/3   Pending   0  
20h
kube-system   kubernetes-dashboard-716739405-n7x9l   0/1   Pending   0  
20h
kube-system   monitoring-grafana-2360823841-bfd5b0/1   Pending   0  
1d
kube-system   monitoring-influxdb-2323019309-mgnb5   0/1   Pending   0  
1d
kube-system   tiller-deploy-737598192-dq0pm  0/1   Pending   0  
1d

This new pod should be powerful enough but still installed centos. I used to 
have no problem when setting up undercloud in previous pod which is also a 
centos pod. Have you ever met this problem ? or maybe we should ask UNH lab to 
reinstall a Ubuntu OS.

Thanks
Harry Huang

IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.
This message and the information contained herein is proprietary and 
confidential and subject to the Amdocs policy statement,
you may review at https://www.amdocs.com/about/email-disclaimer
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] 答复: [onap-discuss] 答复: [Auto] Error when create onap pods using kubernetes

2017-09-12 Thread huangxiangyu 

Roger, Thanks. The config pod shows no error now

发件人: Roger Maitland [mailto:roger.maitl...@amdocs.com]
发送时间: 2017年9月11日 20:53
收件人: huangxiangyu <huangxiang...@huawei.com>; Michael O'Brien 
<frank.obr...@amdocs.com>; Tina Tsou <tina.t...@arm.com>
抄送: onap-disc...@lists.onap.org; opnfv-tech-discuss@lists.opnfv.org
主题: RE: [onap-discuss] 答复: [opnfv-tech-discuss] [Auto] Error when create onap 
pods using kubernetes

Hi Harry,

A significant improvement to OOM was pushed on Friday, see the attached email.  
This new error refers to missing values in the 
/oom/kubernetes/config/onap-parameters.yaml configuration file.

Cheers,
Roger

From: 
onap-discuss-boun...@lists.onap.org<mailto:onap-discuss-boun...@lists.onap.org> 
[mailto:onap-discuss-boun...@lists.onap.org] On Behalf Of huangxiangyu
Sent: Monday, September 11, 2017 3:42 AM
To: Michael O'Brien; Tina Tsou
Cc: onap-disc...@lists.onap.org<mailto:onap-disc...@lists.onap.org>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: [onap-discuss] 答复: [opnfv-tech-discuss] [Auto] Error when create onap 
pods using kubernetes

Michael

Those two nginx containers are created manually for test purpose. I’m afraid 
that I don’t have any Ubuntu 16 environment right now so I have to continue 
test with Ubuntu 14. I just pull the oom repo today and there is new error 
appears when running ./createConfig.sh -n onap.
kubectl logs:
Validating onap-parameters.yaml has been populated
Error: OPENSTACK_UBUNTU_14_IMAGE must be set in onap-parameters.yaml

However It’s not always successful when I creating the config pod even before I 
pulled the oom repo. Usually, this config pod stays at creating state and never 
be completed. I ran the deleteAll.bash and delete /dockerdata-nfs just as wiki 
instructed. So am I missing any step ?

Thanks
Harry

发件人: Michael O'Brien [mailto:frank.obr...@amdocs.com]
发送时间: 2017年9月8日 11:59
收件人: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>; 
Tina Tsou <tina.t...@arm.com<mailto:tina.t...@arm.com>>
抄送: 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
onap-disc...@lists.onap.org<mailto:onap-disc...@lists.onap.org>
主题: RE: [opnfv-tech-discuss] [Auto] Error when create onap pods using kubernetes

Harry,
   Hi, some comments.
   The nginx containers – we are not deploying these, since they are in the 
default namespace they don’t look part of a normal rancher setup as well – I am 
curious where these 2 pods came from and why you would need a reverse proxy – 
also verify you are running rancher on 8880 to avoid 80/8080 conflicts with 
these.
I am suspicious of this reverse proxy – I would expect your forwarding 
issues stem from these 2 servers – normally used to manage a private subnet – 
they might not be handling IPV6 traffic (I remember an issue with this in 
general from a couple years ago)

default   nginx-deployment-431080787-6chxv   1/1   Running  
  0  1d
default   nginx-deployment-431080787-9nswb   1/1   Running  
  0  1d

I would recommend you run on Ubuntu 16.04 not 14 – may work OK but all our 
examples assume 16 and we have not tested 14 (note that I had issues with 17).
In a build before last Saturday – I did see the same 3 pods fail to come up 
vnc-portal, sdc-be and sdc-fe – make sure you have pulled from master this week 
- (try a git pull) – then reset your config pod via the following if any new 
content comes in.
https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-Delete/Rerunconfig-initcontainerfor/dockerdata-nfsrefresh

The aai-gremlin pod is not required and can be ignored for now – but it 
normally starts up – see the OOM-Kubernetes status section on

https://wiki.onap.org/display/DW/ONAP+master+branch+Stabilization#ONAPmasterbranchStabilization-20170907:OOMKubernetes

 thank you
 /michael



From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Thursday, September 7, 2017 22:56
To: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>; 
Tina Tsou <tina.t...@arm.com<mailto:tina.t...@arm.com>>
Cc: 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
onap-disc...@lists.onap.org<mailto:onap-disc...@lists.onap.org>
Subject: 答复: [opnfv-tech-discuss] [Auto] Error when create onap pods using 
kubernetes

Hi Michael

Here the environment info：
Distributor ID: Ubuntu
Description:Ubuntu 14.04.5 LTS
Release:14.04
Codename:   trusty

I didn’t check the pod status after I saw the Error message. Seems this ipv6 
error didn't stop pod creating process maybe this error only leads to no ipv6 
address for every pod.
Here the pods status:
NAMESPACE NAME   READY STATUS   
  RESTARTS   AGE
default   ng

[opnfv-tech-discuss] 答复: [Auto] Error when create onap pods using kubernetes

2017-09-11 Thread huangxiangyu 
Michael

Those two nginx containers are created manually for test purpose. I’m afraid 
that I don’t have any Ubuntu 16 environment right now so I have to continue 
test with Ubuntu 14. I just pull the oom repo today and there is new error 
appears when running ./createConfig.sh -n onap.
kubectl logs:
Validating onap-parameters.yaml has been populated
Error: OPENSTACK_UBUNTU_14_IMAGE must be set in onap-parameters.yaml

However It’s not always successful when I creating the config pod even before I 
pulled the oom repo. Usually, this config pod stays at creating state and never 
be completed. I ran the deleteAll.bash and delete /dockerdata-nfs just as wiki 
instructed. So am I missing any step ?

Thanks
Harry

发件人: Michael O'Brien [mailto:frank.obr...@amdocs.com]
发送时间: 2017年9月8日 11:59
收件人: huangxiangyu <huangxiang...@huawei.com>; Tina Tsou <tina.t...@arm.com>
抄送: opnfv-tech-discuss@lists.opnfv.org; onap-disc...@lists.onap.org
主题: RE: [opnfv-tech-discuss] [Auto] Error when create onap pods using kubernetes

Harry,
   Hi, some comments.
   The nginx containers – we are not deploying these, since they are in the 
default namespace they don’t look part of a normal rancher setup as well – I am 
curious where these 2 pods came from and why you would need a reverse proxy – 
also verify you are running rancher on 8880 to avoid 80/8080 conflicts with 
these.
I am suspicious of this reverse proxy – I would expect your forwarding 
issues stem from these 2 servers – normally used to manage a private subnet – 
they might not be handling IPV6 traffic (I remember an issue with this in 
general from a couple years ago)

default   nginx-deployment-431080787-6chxv   1/1   Running  
  0  1d
default   nginx-deployment-431080787-9nswb   1/1   Running  
  0  1d

I would recommend you run on Ubuntu 16.04 not 14 – may work OK but all our 
examples assume 16 and we have not tested 14 (note that I had issues with 17).
In a build before last Saturday – I did see the same 3 pods fail to come up 
vnc-portal, sdc-be and sdc-fe – make sure you have pulled from master this week 
- (try a git pull) – then reset your config pod via the following if any new 
content comes in.
https://wiki.onap.org/display/DW/ONAP+on+Kubernetes#ONAPonKubernetes-Delete/Rerunconfig-initcontainerfor/dockerdata-nfsrefresh

The aai-gremlin pod is not required and can be ignored for now – but it 
normally starts up – see the OOM-Kubernetes status section on

https://wiki.onap.org/display/DW/ONAP+master+branch+Stabilization#ONAPmasterbranchStabilization-20170907:OOMKubernetes

 thank you
 /michael



From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Thursday, September 7, 2017 22:56
To: Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>; 
Tina Tsou <tina.t...@arm.com<mailto:tina.t...@arm.com>>
Cc: 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
onap-disc...@lists.onap.org<mailto:onap-disc...@lists.onap.org>
Subject: 答复: [opnfv-tech-discuss] [Auto] Error when create onap pods using 
kubernetes

Hi Michael

Here the environment info：
Distributor ID: Ubuntu
Description:Ubuntu 14.04.5 LTS
Release:14.04
Codename:   trusty

I didn’t check the pod status after I saw the Error message. Seems this ipv6 
error didn't stop pod creating process maybe this error only leads to no ipv6 
address for every pod.
Here the pods status:
NAMESPACE NAME   READY STATUS   
  RESTARTS   AGE
default   nginx-deployment-431080787-6chxv   1/1   Running  
  0  1d
default   nginx-deployment-431080787-9nswb   1/1   Running  
  0  1d
kube-system   heapster-4285517626-7vnf3  1/1   Running  
  0  7d
kube-system   kube-dns-646531078-x4h83   3/3   Running  
  0  7d
kube-system   kubernetes-dashboard-716739405-6pz6n   1/1   Running  
  20 7d
kube-system   monitoring-grafana-3552275057-03wqg1/1   Running  
  0  7d
kube-system   monitoring-influxdb-4110454889-527nw   1/1   Running  
  0  7d
kube-system   tiller-deploy-737598192-5d3hc  1/1   Running  
  0  7d
onap  config-init0/1   
Completed  0  1d
onap-aai  aai-dmaap-522748218-2jc3p  1/1   Running  
  0  1d
onap-aai  aai-kafka-2485280328-3kd9x 1/1   Running  
  0  1d
onap-aai  aai-resources-353718113-3h81b  1/1   Running  
  0  1d
onap-aai  aai-service-3321436576-twmwf   1/1   Running

[opnfv-tech-discuss] 答复: [Auto] Error when create onap pods using kubernetes

2017-09-07 Thread huangxiangyu 
-2640808243-v35fh1/1   Running  
  0  1d
onap-sdc  sdc-es-227943957-lwrpb 1/1   Running  
  0  1d
onap-sdc  sdc-fe-1609420241-r1n3d0/1   Init:0/1 
  1431d
onap-sdc  sdc-kb-1998598941-7p4n31/1   Running  
  0  1d
onap-sdnc sdnc-250717546-qbt17   1/1   Running  
  0  1d
onap-sdnc sdnc-dbhost-3807967487-l7lq1   1/1   Running  
  0  1d
onap-sdnc sdnc-dgbuilder-3446959187-dr4271/1   Running  
  0  1d
onap-sdnc sdnc-portal-4253352894-x6gh7   1/1   Running  
  0  1d
onap-vid  vid-mariadb-2932072366-t8sn1   1/1   Running  
  0  1d
onap-vid  vid-server-377438368-6fpr1 1/1   Running  
  0  1

here post the ipv6 settings of my server anyway:
net.ipv6.conf.all.accept_dad = 1
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.all.accept_ra_defrtr = 1
net.ipv6.conf.all.accept_ra_from_local = 0
net.ipv6.conf.all.accept_ra_pinfo = 1
net.ipv6.conf.all.accept_ra_rt_info_max_plen = 0
net.ipv6.conf.all.accept_ra_rtr_pref = 1
net.ipv6.conf.all.accept_redirects = 1
net.ipv6.conf.all.accept_source_route = 0
net.ipv6.conf.all.autoconf = 1
net.ipv6.conf.all.dad_transmits = 1
net.ipv6.conf.all.disable_ipv6 = 0
net.ipv6.conf.all.force_mld_version = 0
net.ipv6.conf.all.force_tllao = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.all.hop_limit = 64
net.ipv6.conf.all.max_addresses = 16
net.ipv6.conf.all.max_desync_factor = 600
net.ipv6.conf.all.mc_forwarding = 0
net.ipv6.conf.all.mldv1_unsolicited_report_interval = 1
net.ipv6.conf.all.mldv2_unsolicited_report_interval = 1000
net.ipv6.conf.all.mtu = 1280
net.ipv6.conf.all.ndisc_notify = 0
net.ipv6.conf.all.proxy_ndp = 0
net.ipv6.conf.all.regen_max_retry = 3
net.ipv6.conf.all.router_probe_interval = 60
net.ipv6.conf.all.router_solicitation_delay = 1
net.ipv6.conf.all.router_solicitation_interval = 4
net.ipv6.conf.all.router_solicitations = 3
net.ipv6.conf.all.suppress_frag_ndisc = 1
net.ipv6.conf.all.temp_prefered_lft = 86400
net.ipv6.conf.all.temp_valid_lft = 604800
net.ipv6.conf.all.use_tempaddr = 2

Thanks
Harry

发件人: Michael O'Brien [mailto:frank.obr...@amdocs.com]
发送时间: 2017年9月7日 19:28
收件人: Tina Tsou <tina.t...@arm.com>; huangxiangyu <huangxiang...@huawei.com>
抄送: opnfv-tech-discuss@lists.opnfv.org; onap-disc...@lists.onap.org
主题: RE: [opnfv-tech-discuss] [Auto] Error when create onap pods using kubernetes

Tina, Harry,
   Hi, sorry to hear that.  Could you post your environment (Ubuntu 16.04 ?)
   We can compare network setups then as I have not seen an IPV6 issue yet.
   Are you seeing all 6 pods of the k8s/rancher stack
   Post your results from a
   Kubectl get pods –all-namespaces –a
   You should see all 1/1 or 3/3
   There are sometimes issues with a clustered rancher setup where the dns pod 
is 0/1 above.

Thank you
/michael

From: Tina Tsou [mailto:tina.t...@arm.com]
Sent: Thursday, September 7, 2017 03:31
To: huangxiangyu <huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>; 
Michael O'Brien <frank.obr...@amdocs.com<mailto:frank.obr...@amdocs.com>>
Cc: 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: Re: [opnfv-tech-discuss] [Auto] Error when create onap pods using 
kubernetes

Dear Frank,

Would you like to help here?

Thank you,
Tina

On Sep 6, 2017, at 7:03 PM, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>> wrote:
Hi Tina

Here is the error log of the main issue I met when perform ONAP deploy 
according to  https://wiki.onap.org/display/DW/ONAP+on+Kubernetes.

Creating deployments and services **
E0907 01:24:17.232548   42374 portforward.go:209] Unable to create listener: 
Error listen tcp6 [::1]:51
444: bind: cannot assign requested address
NAME:   mso
LAST DEPLOYED: Thu Sep  7 01:24:38 2017
NAMESPACE: onap
STATUS: DEPLOYED

RESOURCES:
==> v1/Service
NAME CLUSTER-IPEXTERNAL-IP  PORT(S)
 AGE
mariadb  10.43.13.1783306:30252/TCP
 0s
mso  10.43.53.224
8080:30223/TCP,3904:30225/TCP,3905:30224/TCP,9990:30222/TCP,8787:30
250/TCP  0s

==> extensions/v1beta1/Deployment
NAME DESIRED  CURRENT  UP-TO-DATE  AVAILABLE  AGE
mariadb  111   0  0s
mso  111   0  0s

I try to enable ipv6 on host server but still can’t fix the error. Maybe you 
can find some help with this?

Thanks
Harry
IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to

[opnfv-tech-discuss] [Auto] Error when create onap pods using kubernetes

2017-09-06 Thread huangxiangyu 
Hi Tina

Here is the error log of the main issue I met when perform ONAP deploy 
according to  https://wiki.onap.org/display/DW/ONAP+on+Kubernetes.

Creating deployments and services **
E0907 01:24:17.232548   42374 portforward.go:209] Unable to create listener: 
Error listen tcp6 [::1]:51
444: bind: cannot assign requested address
NAME:   mso
LAST DEPLOYED: Thu Sep  7 01:24:38 2017
NAMESPACE: onap
STATUS: DEPLOYED

RESOURCES:
==> v1/Service
NAME CLUSTER-IPEXTERNAL-IP  PORT(S)
 AGE
mariadb  10.43.13.1783306:30252/TCP
 0s
mso  10.43.53.224
8080:30223/TCP,3904:30225/TCP,3905:30224/TCP,9990:30222/TCP,8787:30
250/TCP  0s

==> extensions/v1beta1/Deployment
NAME DESIRED  CURRENT  UP-TO-DATE  AVAILABLE  AGE
mariadb  111   0  0s
mso  111   0  0s

I try to enable ipv6 on host server but still can't fix the error. Maybe you 
can find some help with this?

Thanks
Harry
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] API mismatch between Open-O and Compass

2016-12-19 Thread huangxiangyu 
Hi Yingjun

 Currently , OpenStack Newton deployed by Compass use keystone API V3 
instead of V2 . I assume there may be API mismatch when Open-O talk to 
OpenStack. Please check with Open-O developers if Open-O only support keystone 
V2. And if so, modification should be made in Open-O in order to integrate with 
Compass. BTW, does this issue also exist in JuJu ? maybe victor can answer this 
question ?

Regards
Harry Huang
___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

Re: [opnfv-tech-discuss] OPERA is calling for developers for Open-O integration

2016-12-05 Thread huangxiangyu 
Hi Yingjun,

 Does OPERA and Open-O have regular meetings? we can discuss some 
further detail about the integration.

Regards
HuangXiangyu


From: zhao.huab...@zte.com.cn [mailto:zhao.huab...@zte.com.cn]
Sent: Tuesday, December 06, 2016 9:45 AM
To: Yingjun Li
Cc: Chigang (Justin); Yunxia Chen; huangxiangyu; Liuguangmin; Linan (Alain 
Lee); openo-...@lists.open-o.org; opnfv-tech-discuss@lists.opnfv.org; 
pmail_pmailopenotct
Subject: 答复: RE: Re:RE: [opnfv-tech-discuss] OPERA is calling for developers 
for Open-O integration

Yes, for now we don't have manpower for vIMS test case and scripts.

I'm not familiar with the plugfest project. Do I understand correctly with the 
plugfest scripts? Please point out if I‘m wrong.
Huabing: Sorry typo, it should be FuncTest.



发件人: Yingjun Li <yingjun...@huawei.com<mailto:yingjun...@huawei.com>>
收件人: "zhao.huab...@zte.com.cn<mailto:zhao.huab...@zte.com.cn>" 
<zhao.huab...@zte.com.cn<mailto:zhao.huab...@zte.com.cn>>,
抄送:"Chigang (Justin)" <chig...@huawei.com<mailto:chig...@huawei.com>>, 
"opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>" 
<opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>>,
 "openo-...@lists.open-o.org<mailto:openo-...@lists.open-o.org>" 
<openo-...@lists.open-o.org<mailto:openo-...@lists.open-o.org>>, 
pmail_pmailopenotct 
<pmailopeno...@huawei.com<mailto:pmailopeno...@huawei.com>>, Liuguangmin 
<liuguang...@huawei.com<mailto:liuguang...@huawei.com>>, "Linan (Alain Lee)" 
<ln.li...@huawei.com<mailto:ln.li...@huawei.com>>, "Yunxia Chen" 
<helen.c...@huawei.com<mailto:helen.c...@huawei.com>>, huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
日期: 12/06/2016 09:34 AM
主题:RE: Re:RE: [opnfv-tech-discuss] OPERA is calling for developers for 
Open-O integration




Hi Huabing

I’d just confirm with you that ZTE team will contribute for
1.   vIMS service template design and development
2.   FuncTest integration with vIMS test scripts

Leaving the vIMS test cases and scripts dev for others. Is that right?

Basically the Plugfest is not a project, just an event.

Thanks
Yingjun


From: zhao.huab...@zte.com.cn<mailto:zhao.huab...@zte.com.cn> 
[mailto:zhao.huab...@zte.com.cn]
Sent: Monday, December 05, 2016 5:09 PM
To: Yingjun Li
Cc: Chigang (Justin); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
mano...@lists.opnfv.org<mailto:mano...@lists.opnfv.org>; 
openo-...@lists.open-o.org<mailto:openo-...@lists.open-o.org>; 
pmail_pmailopenotct; Liuguangmin; Linan (Alain Lee); Yunxia Chen; huangxiangyu
Subject: Re:RE: [opnfv-tech-discuss] OPERA is calling for developers for Open-O 
integration

Hi Yingjun,
We can contribute to the vIMS service template design and the functest scripts 
to install the open-o with compass and run the use case, for the vIMS test case 
, I'm afarid ZTE team may not have enough manpower to do that part.

I'm not familiar with the plugfest project. Do I understand correctly with the 
plugfest scripts? Please point out if I‘m wrong.

Thanks,
Huabing
Original Mail

Sender: YingjunLi
To: Chigang 
(Justin);＜opnfv-tech-discuss@lists.opnfv.org＞＜mano...@lists.opnfv.org＞＜openo-...@lists.open-o.org＞pmail_pmailopenotct;
CC: Liuguangmin;zhaohuabing10201488;Linan (Alain Lee);Yunxia Chen;huangxiangyu;
Date: 2016/12/06 06:03
Subject: RE: [opnfv-tech-discuss] OPERA is calling for developers for Open-O 
integration

Chigang (Justin)
Sent: Friday, December 02, 2016 9:35 PM
To: Yingjun Li; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
mano...@lists.opnfv.org<mailto:mano...@lists.opnfv.org>; 
openo-...@lists.open-o.org<mailto:openo-...@lists.open-o.org>; 
pmail_pmailopenotct
Cc: Liuguangmin; zhao.huab...@zte.com.cn<mailto:zhao.huab...@zte.com.cn>; Linan 
(Alain Lee); Yunxia Chen; huangxiangyu
Subject: 答复: [opnfv-tech-discuss] OPERA is calling for developers for Open-O 
integration

Hi Yingjun,

Glad to hear OPREA integrating with Compass..

We have finished OpenStack Newton release integation in Danube MS3. In next 
step,  it is planning to support feature project integrating.

Huangxiangyu is good at Compass integration, I recommend him as the cross 
liaison between Compass and OPREA.

About integrating with Funtest and CI/CD process, you can contract Functest and 
Infra working group to get more professional advise from them.

Best Regrads
Justin


发件人:  
opnfv-tech-discuss-boun...@lists.opnfv.org<mailto:opnfv-tech-discuss-boun...@lists.opnfv.org>
 [opnfv-tech-discuss-boun...@lists.opnfv.org] 代表 Yingjun Li 
[yingjun...@huawei.com]
发送时间:  2016年12月2日

Re: [opnfv-tech-discuss] congress support in compass4nfv

2016-10-31 Thread huangxiangyu 
Hi, Bryan

The error log is a little too long to post on IRC, so I just send you via 
email. But IRC is good place to communicate, we can talk about the further 
detail there. for the deploy environment, I am using  ubuntu 16.04.1 on my 
hosts and this version  of ubuntu has official congress debs. Here is what I 
got using apt list command:
 congress-common/unknown,now 3.0.0+dfsg1-1 all
 congress-server/unknown,now 3.0.0+dfsg1-1 all
 python-congress/now 4.0.0.0rc2~dev80-1
 python-congressclient/unknown 1.2.3-2 all
after configuration and database operations, I  encounter the no module named 
antlr3 error. I try to fix it by installing antlr_python_runtime but I got 
error_log_1 when installed runtime V3.0.1 , error_log_2 when installed V3.1.3.

Thanks
Harry huang

From: SULLIVAN, BRYAN L [mailto:bs3...@att.com]
Sent: Monday, October 31, 2016 11:39 PM
To: huangxiangyu; Carlos Goncalves
Cc: Xueyifei (Yifei Xue); opnfv-tech-discuss@lists.opnfv.org
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Harry,

Can you drop a console log or other details on the process you are using to IRC 
(#opnfv-copper) or on an etherpad somethere etc? I need to understand where you 
are getting the Congress code (e.g. "congress debs") and what 
environment/process you are using to install it. I'm not familiar with antlr 
and don't know what role it might have in the install. But I can probably 
figure it out with more info.

Thanks,
Bryan Sullivan | AT

From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Wednesday, October 26, 2016 8:28 PM
To: SULLIVAN, BRYAN L <bs3...@att.com<mailto:bs3...@att.com>>; Carlos Goncalves 
<carlos.goncal...@neclab.eu<mailto:carlos.goncal...@neclab.eu>>
Cc: Xueyifei (Yifei Xue) <xueyi...@huawei.com<mailto:xueyi...@huawei.com>>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi, I encounter some problem when I start congress-server after I installed 
congress using congress debs: when I used antlr V3.0.1 runtime returns 
"ParserRuleReturnScope  is not defined" error while  other antlr  runtime has 
ANTLR version mismatch problem saying 'The recognizer has been generated by 
V3.0.1. Please use the V3.0.1 runtime '. So which antlr runtime should I use?

Thanks
Harry huang


From: SULLIVAN, BRYAN L [mailto:bs3...@att.com]
Sent: Thursday, October 13, 2016 1:19 AM
To: huangxiangyu; Carlos Goncalves
Cc: Xueyifei (Yifei Xue); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Email is OK, but you can also edit the Copper wiki at 
https://wiki.opnfv.org/display/copper/Installer+Support or provide a link to 
where you are describing the work on your wiki or JIRA. I'll also try to 
capture the status there as it gets developed.

Thanks,
Bryan Sullivan | AT

From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Tuesday, October 11, 2016 6:45 PM
To: Carlos Goncalves 
<carlos.goncal...@neclab.eu<mailto:carlos.goncal...@neclab.eu>>; huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
Cc: Xueyifei (Yifei Xue) <xueyi...@huawei.com<mailto:xueyi...@huawei.com>>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
SULLIVAN, BRYAN L <bs3...@att.com<mailto:bs3...@att.com>>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

OK, I got all your needs now. I also understand congress is an important 
component and agree that it should be appear in all scenarios. We are making 
some adjustment about our ansible now and I will suggest to add congress into 
the common part. Compass4nfv support offline installation so now I am working 
on adding congress debs. I will update you our progress on this thread.

Best regards
Herry Huang

From: Carlos Goncalves [mailto:carlos.goncal...@neclab.eu]
Sent: Sunday, October 09, 2016 5:50 PM
To: huangxiangyu
Cc: Xueyifei (Yifei Xue); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
SULLIVAN, BRYAN L
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Henry,

Thanks for working on adding Congress support to Compass!

>From the Doctor side, we also just need Congress installed as a base service 
>available in all Compass scenarios.
There are no patches needing to be backported if Compass in Danube releases 
with OpenStack Newton or later.

Thanks,
Carlos

From: SULLIVAN, BRYAN L [mailto:bs3...@att.com]
Sent: 09 October 2016 05:24
To: 'huangxiangyu'; Carlos Goncalves
Cc: Xueyifei (Yifei Xue); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Herry,

Glad to be working with Compass on

Re: [opnfv-tech-discuss] congress support in compass4nfv

2016-10-26 Thread huangxiangyu 
Hi, I encounter some problem when I start congress-server after I installed 
congress using congress debs: when I used antlr V3.0.1 runtime returns 
"ParserRuleReturnScope  is not defined" error while  other antlr  runtime has 
ANTLR version mismatch problem saying 'The recognizer has been generated by 
V3.0.1. Please use the V3.0.1 runtime '. So which antlr runtime should I use?

Thanks
Harry huang


From: SULLIVAN, BRYAN L [mailto:bs3...@att.com]
Sent: Thursday, October 13, 2016 1:19 AM
To: huangxiangyu; Carlos Goncalves
Cc: Xueyifei (Yifei Xue); opnfv-tech-discuss@lists.opnfv.org
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Email is OK, but you can also edit the Copper wiki at 
https://wiki.opnfv.org/display/copper/Installer+Support or provide a link to 
where you are describing the work on your wiki or JIRA. I'll also try to 
capture the status there as it gets developed.

Thanks,
Bryan Sullivan | AT

From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Tuesday, October 11, 2016 6:45 PM
To: Carlos Goncalves 
<carlos.goncal...@neclab.eu<mailto:carlos.goncal...@neclab.eu>>; huangxiangyu 
<huangxiang...@huawei.com<mailto:huangxiang...@huawei.com>>
Cc: Xueyifei (Yifei Xue) <xueyi...@huawei.com<mailto:xueyi...@huawei.com>>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
SULLIVAN, BRYAN L <bs3...@att.com<mailto:bs3...@att.com>>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

OK, I got all your needs now. I also understand congress is an important 
component and agree that it should be appear in all scenarios. We are making 
some adjustment about our ansible now and I will suggest to add congress into 
the common part. Compass4nfv support offline installation so now I am working 
on adding congress debs. I will update you our progress on this thread.

Best regards
Herry Huang

From: Carlos Goncalves [mailto:carlos.goncal...@neclab.eu]
Sent: Sunday, October 09, 2016 5:50 PM
To: huangxiangyu
Cc: Xueyifei (Yifei Xue); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>; 
SULLIVAN, BRYAN L
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Henry,

Thanks for working on adding Congress support to Compass!

>From the Doctor side, we also just need Congress installed as a base service 
>available in all Compass scenarios.
There are no patches needing to be backported if Compass in Danube releases 
with OpenStack Newton or later.

Thanks,
Carlos

From: SULLIVAN, BRYAN L [mailto:bs3...@att.com]
Sent: 09 October 2016 05:24
To: 'huangxiangyu'; Carlos Goncalves
Cc: Xueyifei (Yifei Xue); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Herry,

Glad to be working with Compass on in this!

Congress should be installed as a basic service that is available in all 
Compass scenarios. This is what we did for Apex and JOID. There's no need for a 
specific scenario.

You can see they types of policy use cases that are in development for Congress 
at https://wiki.opnfv.org/display/copper/testing. The test cases shown there 
are integrated into Functest.

The Doctor project also depends upon Congress for some of its features.

I have an existing Ansible 
module<https://git.opnfv.org/cgit/copper/tree/components/congress/install/ansible>
 in the copper repo, that needs to be updated since I moved to a simple 
bash-script 
approach<https://git.opnfv.org/cgit/copper/tree/components/congress/install/bash>
 back in Brahmaputra, and then worked with the JOID and Apex teams on their 
installer tools (JuJu and Puppet). We can talk about updating that script at 
some meeting if you want to set it up. We don't have regular meetings in Copper 
at this time.

Thanks,
Bryan Sullivan | AT

From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Friday, October 07, 2016 9:26 PM
To: SULLIVAN, BRYAN L <bs3...@att.com<mailto:bs3...@att.com>>; 
carlos.goncal...@neclab.eu<mailto:carlos.goncal...@neclab.eu>
Cc: Xueyifei (Yifei Xue) <xueyi...@huawei.com<mailto:xueyi...@huawei.com>>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: [opnfv-tech-discuss] congress support in compass4nfv

1.Hi, I am from compass4nfv team and see your Jira 
COMPASS-367<https://jira.opnfv.org/browse/COMPASS-367>. We can integrate 
congress into compass4nfv using ansible and want to check few things with you :

1.   How would you like to use congress? You just use its function or you 
have things based on it.

2.   Do you need a single congress scenario or a scenario with congress and 
what roles this scenario should have.

Best regards
Herry Huang

___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

Re: [opnfv-tech-discuss] congress support in compass4nfv

2016-10-11 Thread huangxiangyu 
OK, I got all your needs now. I also understand congress is an important 
component and agree that it should be appear in all scenarios. We are making 
some adjustment about our ansible now and I will suggest to add congress into 
the common part. Compass4nfv support offline installation so now I am working 
on adding congress debs. I will update you our progress on this thread.

Best regards
Herry Huang

From: Carlos Goncalves [mailto:carlos.goncal...@neclab.eu]
Sent: Sunday, October 09, 2016 5:50 PM
To: huangxiangyu
Cc: Xueyifei (Yifei Xue); opnfv-tech-discuss@lists.opnfv.org; SULLIVAN, BRYAN L
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Henry,

Thanks for working on adding Congress support to Compass!

>From the Doctor side, we also just need Congress installed as a base service 
>available in all Compass scenarios.
There are no patches needing to be backported if Compass in Danube releases 
with OpenStack Newton or later.

Thanks,
Carlos

From: SULLIVAN, BRYAN L [mailto:bs3...@att.com]
Sent: 09 October 2016 05:24
To: 'huangxiangyu'; Carlos Goncalves
Cc: Xueyifei (Yifei Xue); 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: RE: [opnfv-tech-discuss] congress support in compass4nfv

Hi Herry,

Glad to be working with Compass on in this!

Congress should be installed as a basic service that is available in all 
Compass scenarios. This is what we did for Apex and JOID. There's no need for a 
specific scenario.

You can see they types of policy use cases that are in development for Congress 
at https://wiki.opnfv.org/display/copper/testing. The test cases shown there 
are integrated into Functest.

The Doctor project also depends upon Congress for some of its features.

I have an existing Ansible 
module<https://git.opnfv.org/cgit/copper/tree/components/congress/install/ansible>
 in the copper repo, that needs to be updated since I moved to a simple 
bash-script 
approach<https://git.opnfv.org/cgit/copper/tree/components/congress/install/bash>
 back in Brahmaputra, and then worked with the JOID and Apex teams on their 
installer tools (JuJu and Puppet). We can talk about updating that script at 
some meeting if you want to set it up. We don't have regular meetings in Copper 
at this time.

Thanks,
Bryan Sullivan | AT

From: huangxiangyu [mailto:huangxiang...@huawei.com]
Sent: Friday, October 07, 2016 9:26 PM
To: SULLIVAN, BRYAN L <bs3...@att.com<mailto:bs3...@att.com>>; 
carlos.goncal...@neclab.eu<mailto:carlos.goncal...@neclab.eu>
Cc: Xueyifei (Yifei Xue) <xueyi...@huawei.com<mailto:xueyi...@huawei.com>>; 
opnfv-tech-discuss@lists.opnfv.org<mailto:opnfv-tech-discuss@lists.opnfv.org>
Subject: [opnfv-tech-discuss] congress support in compass4nfv

1.Hi, I am from compass4nfv team and see your Jira 
COMPASS-367<https://jira.opnfv.org/browse/COMPASS-367>. We can integrate 
congress into compass4nfv using ansible and want to check few things with you :

1.   How would you like to use congress? You just use its function or you 
have things based on it.

2.   Do you need a single congress scenario or a scenario with congress and 
what roles this scenario should have.

Best regards
Herry Huang

___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss

[opnfv-tech-discuss] congress support in compass4nfv

2016-10-07 Thread huangxiangyu 
1.Hi, I am from compass4nfv team and see your Jira 
COMPASS-367. We can integrate 
congress into compass4nfv using ansible and want to check few things with you :

1.   How would you like to use congress? You just use its function or you 
have things based on it.

2.   Do you need a single congress scenario or a scenario with congress and 
what roles this scenario should have.

Best regards
Herry Huang

___
opnfv-tech-discuss mailing list
opnfv-tech-discuss@lists.opnfv.org
https://lists.opnfv.org/mailman/listinfo/opnfv-tech-discuss