[Paraview] Display crash running paraview with low-end graphics card
Hi All, When using the slice of clip tool on a 3D view if I try to adjust the plane my display crashes. I suspect this has something to do with the relatively low-end graphics card on my system and there is some toggle or switch I'm missing, but can't for the life of me work out what it is. Any help would be gratefully appreciated. For reference I'm running 3.11.1 on Ubuntu-64 bit laptop 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) cheers Kit BTW - the following is the call stack from when I killed the application. #0 0x7fffcecebf72 in ?? () from /usr/lib/dri/i965_dri.so #1 0x7fffce9e2ecc in ?? () from /usr/lib/dri/libdricore.so #2 0x7fffce9e347e in _swrast_ReadPixels () from /usr/lib/dri/libdricore.so #3 0x7fffcecedb2b in intelReadPixels () from /usr/lib/dri/i965_dri.so #4 0x7fffcea16188 in ?? () from /usr/lib/dri/libdricore.so #5 0x7fffcea1929c in _mesa_meta_CopyTexSubImage2D () from /usr/lib/dri/libdricore.so #6 0x7fffce9479a0 in ?? () from /usr/lib/dri/libdricore.so #7 0x7fffce94b1ca in _mesa_CopyTexSubImage2D () from /usr/lib/dri/libdricore.so #8 0x7fffe9997594 in vtkOpenGLRenderer::RenderPeel (this=0x17b1820, layer=2) src/ParaView-3.11.1/VTK/Rendering/vtkOpenGLRenderer.cxx:981 #9 0x7fffe9995721 in vtkOpenGLRenderer::DeviceRenderTranslucentPolygonalGeometry ( this=0x17b1820) src/ParaView-3.11.1/VTK/Rendering/vtkOpenGLRenderer.cxx:652 -- Kit Chambers Principal Geophysicist Office: +44 1872 562 093 Direct: +44 1872 879 007 Mobile: +44 7816506558 Email: kit.chamb...@rocktalkimaging.com attachment: rocktalk_imagingsmall.png___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Help getting resetting cameras between batch viz runs
Marco, Thanks very much for your reply. Actually, it isn't the camera I need information on, it's the rest of the object. I need to know how big the thing I'm looking at is, so I can know where exactly I should move the camera. And I can't figure out how to get bounding box on any of the objects that are available to me. Do you have any idea? On Fri, Sep 2, 2011 at 4:05 AM, Marco Nawijn naw...@gmail.com wrote: Hello Rick, You can get a direct reference to the camera like this: camera = GetActiveCamera() You have than full control with the different Get/Set methods. Like: camera.GetFocalPoint() (-12.119979858398438, -3.0926971435546875, 36.27721977233887) Don't forget to call Render() if you set camera parameters. On Thu, Sep 1, 2011 at 11:46 PM, Rick Muller rpmul...@gmail.com wrote: I'm using the Python scripting facility in Paraview to do some batch visualization of some semiconductor models I'm simulating. The Start/Stop Trace feature is great, and I've already put together something quite usable. However, I can't figure out how to reset the camera between different simulations. The code coming out of the Trace feature looked something like: rv = pv.GetRenderView() rv.CameraFocalPoint = [0.223, -0.0160,-0.334] rv.CameraParallelScale = 1.684 rv.CenterOfRotation = [0.223, -0.0160,-0.334] rv.CameraPosition = [0.223, -0.0160, 4.105] rv.CameraClippingRange = [5.308, 8.033] i.e. they already got the center of the object from some query to the objects already in the database. What would I have to do to get this information myself? I'm having a hard time finding info. I've tried reading the doctext for the Outline and OutlineCorners features, and I've seen a couple refs to a GetBounds command while googling around, but I can't find anything that really helps. My pipeline looks something like: * Use the ExodusIIReader to create a reader object * Use the aforementioned render view object to control the camera * Create a slice object in the z-direction at a certain height * Create a data representation and a colormap * Render the object. I can't tell which of the objects I would use for an Outline() or a GetBounds() call. For example, I get the min/max values for the data in the slice via min,max = slice.PointData[0].GetRange() but using s or s.PointData with Outline() or GetBounds() doesn't get me anywhere. Can anyone nudge me in the right direction? Thanks, Rick -- Rick Muller rpmul...@gmail.com 505-750-7557 ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview -- Rick Muller rpmul...@gmail.com 505-750-7557 ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Help getting resetting cameras between batch viz runs
min,max = slice.PointData[0].GetRange() try this: slice. GetDataInformation().DataInformation.GetBounds() Jean CSCS ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Display crash running paraview with low-end graphics card
The options I would try are using mesa or go to Edit-Settings-Render View and check Use Immediate Mode Rendering to on. Both of these are normally slower but if it's a memory allocation problem these may get you past that. Andy On Fri, Sep 2, 2011 at 6:02 AM, kit kit.chamb...@rocktalkimaging.comwrote: ** Hi All, When using the slice of clip tool on a 3D view if I try to adjust the plane my display crashes. I suspect this has something to do with the relatively low-end graphics card on my system and there is some toggle or switch I'm missing, but can't for the life of me work out what it is. Any help would be gratefully appreciated. For reference I'm running 3.11.1 on Ubuntu-64 bit laptop 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) cheers Kit BTW - the following is the call stack from when I killed the application. #0 0x7fffcecebf72 in ?? () from /usr/lib/dri/i965_dri.so #1 0x7fffce9e2ecc in ?? () from /usr/lib/dri/libdricore.so #2 0x7fffce9e347e in _swrast_ReadPixels () from /usr/lib/dri/libdricore.so #3 0x7fffcecedb2b in intelReadPixels () from /usr/lib/dri/i965_dri.so #4 0x7fffcea16188 in ?? () from /usr/lib/dri/libdricore.so #5 0x7fffcea1929c in _mesa_meta_CopyTexSubImage2D () from /usr/lib/dri/libdricore.so #6 0x7fffce9479a0 in ?? () from /usr/lib/dri/libdricore.so #7 0x7fffce94b1ca in _mesa_CopyTexSubImage2D () from /usr/lib/dri/libdricore.so #8 0x7fffe9997594 in vtkOpenGLRenderer::RenderPeel (this=0x17b1820, layer=2) src/ParaView-3.11.1/VTK/Rendering/vtkOpenGLRenderer.cxx:981 #9 0x7fffe9995721 in vtkOpenGLRenderer::DeviceRenderTranslucentPolygonalGeometry ( this=0x17b1820) src/ParaView-3.11.1/VTK/Rendering/vtkOpenGLRenderer.cxx:652 -- *Kit Chambers* *Principal Geophysicist* Office: +44 1872 562 093 Direct: +44 1872 879 007 Mobile: +44 7816506558 Email: *kit.chamb...@rocktalkimaging.comkit.chamb...@reservoirrocktalk.com * ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Cosmo Reader - 64bit IDs
It's on the bug tracker now. http://paraview.org/Bug/view.php?id=12569 In the meantime I think a #define or adding -DID_64 to the cmake's CMAKE_C_FLAGS and CMAKE_CXX_FLAGS ought to do it. David E DeMarle Kitware, Inc. RD Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Thu, Sep 1, 2011 at 4:50 PM, Jon Woodring woodr...@lanl.gov wrote: The way it is coded is that the reader is based on the HACC (MC3) reader code, and it is compiled directly as either 32 bit tags or 64 bit tags. Likewise, the same is for the fields, that could be stored as floats or doubles. I had considered compiling multiple versions of the cosmo reader code to support selecting the version at run-time, but hadn't done anything with it -- but it is an issue. -Jon On 09/01/2011 02:46 PM, David E DeMarle wrote: I will take a look at this tomorrow. I suspect it was hardcoded initially but I should be able to make that configurable pretty easily. David E DeMarle Kitware, Inc. RD Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Wed, Aug 31, 2011 at 10:43 AM, joseph insleyins...@mcs.anl.gov wrote: Hi, I have some large data sets in the Cosmo format that I'd like to visualize with ParaView, but the format is slightly different from that expected by the built-in CosmoReader. Because the data sets I have use a very large number of particles, they use a 64bit int for the ID tag, rather than the 32bit expected by the reader. Looking at the source code for the reader (and HaloFinder) I see that there is an #ifdef ID_64, which if I understand correctly will compile the code using 64 bits for the particle IDs, just as I need. So my first question is, is this understanding correct? If so, how do I configure ParaView to build with the ID_64 defined? Is there some place that I need to add -DID_64 when running ccmake? Also, I assume this means that it will then only read datasets with the 64bit IDs. I do also have some data sets that use the standard 32bit ID format. I was hoping there would be a way (via the GUI perhaps) to specify the precision of the IDs, and use the sam e e xecutable, rather than maintain two builds of ParaView to accommodate the two cosmo formats. Any insight on any of this would be greatly appreciated. Thanks, joe. ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
[Paraview] Load-save camera settings
Dear All, I've encountered an issue with reloading saved camera states using Adjust Camera in interactive mode. If I try to load a camera pvcc file by clicking load - Selecting pvcc file - press ok, my screen does not update. If I do the same, but double click on the pvcc file instead, my screen will update. Is there something I'm missing here? ADDENDUM: In the process of writing the e-mail, I restarted ParaView and now everything works as expected, albeit with a simple dataset. I'll try and track down exactly what brought me to the issue previously and repost. Thanks, Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Load-save camera settings
Update: The pvcc files don't appear to work across ParaView sessions. So, if you save it in one session, restart ParaView, and try to apply it again, it won't work. Apologies if this has already been flagged as an issue. I did do a search for something similar, but couldn't find anything. Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk -Original Message- From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On Behalf Of Adriano Gagliardi Sent: 02 September 2011 15:27 To: paraview@paraview.org Subject: [Paraview] Load-save camera settings Dear All, I've encountered an issue with reloading saved camera states using Adjust Camera in interactive mode. If I try to load a camera pvcc file by clicking load - Selecting pvcc file - press ok, my screen does not update. If I do the same, but double click on the pvcc file instead, my screen will update. Is there something I'm missing here? ADDENDUM: In the process of writing the e-mail, I restarted ParaView and now everything works as expected, albeit with a simple dataset. I'll try and track down exactly what brought me to the issue previously and repost. Thanks, Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Load-save camera settings
Hi Adriano, I just tried it and it works for me. I'm using 3.10.0.What version are you using, and could you provide a specific set of steps to reproduce the issue? Thanks Burlen On 09/02/2011 07:40 AM, Adriano Gagliardi wrote: Update: The pvcc files don't appear to work across ParaView sessions. So, if you save it in one session, restart ParaView, and try to apply it again, it won't work. Apologies if this has already been flagged as an issue. I did do a search for something similar, but couldn't find anything. Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk -Original Message- From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On Behalf Of Adriano Gagliardi Sent: 02 September 2011 15:27 To: paraview@paraview.org Subject: [Paraview] Load-save camera settings Dear All, I've encountered an issue with reloading saved camera states using Adjust Camera in interactive mode. If I try to load a camera pvcc file by clicking load - Selecting pvcc file - press ok, my screen does not update. If I do the same, but double click on the pvcc file instead, my screen will update. Is there something I'm missing here? ADDENDUM: In the process of writing the e-mail, I restarted ParaView and now everything works as expected, albeit with a simple dataset. I'll try and track down exactly what brought me to the issue previously and repost. Thanks, Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Load-save camera settings
Hi Burlen, Yes, I forgot about that information. This is ParaView 3.10.1 release that I built from source on 64-bit Linux CentOS 5.2. I've been pulled onto something else at the moment, but I'll try to present a step-by-step guide as soon as I get a chance. However, if it is working for others, then I should take a better look at my install and make sure there is nothing fishy going on. Cheers, Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk -Original Message- From: Burlen Loring [mailto:blor...@lbl.gov] Sent: 02 September 2011 15:57 To: agaglia...@ara.co.uk Cc: paraview@paraview.org Subject: Re: [Paraview] Load-save camera settings Hi Adriano, I just tried it and it works for me. I'm using 3.10.0.What version are you using, and could you provide a specific set of steps to reproduce the issue? Thanks Burlen On 09/02/2011 07:40 AM, Adriano Gagliardi wrote: Update: The pvcc files don't appear to work across ParaView sessions. So, if you save it in one session, restart ParaView, and try to apply it again, it won't work. Apologies if this has already been flagged as an issue. I did do a search for something similar, but couldn't find anything. Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk -Original Message- From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On Behalf Of Adriano Gagliardi Sent: 02 September 2011 15:27 To: paraview@paraview.org Subject: [Paraview] Load-save camera settings Dear All, I've encountered an issue with reloading saved camera states using Adjust Camera in interactive mode. If I try to load a camera pvcc file by clicking load - Selecting pvcc file - press ok, my screen does not update. If I do the same, but double click on the pvcc file instead, my screen will update. Is there something I'm missing here? ADDENDUM: In the process of writing the e-mail, I restarted ParaView and now everything works as expected, albeit with a simple dataset. I'll try and track down exactly what brought me to the issue previously and repost. Thanks, Adriano === Adriano Gagliardi MEng PhD Business Sector Leader Computational Aerodynamics Aircraft Research Association Ltd. Manton Lane Bedford Tel: 01234 32 4644 E-mail: agaglia...@ara.co.uk Url: www.ara.co.uk ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ** This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender. Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons. Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245 ** ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ** This email contains information that is private and confidential and is intended only for the
[Paraview] Fail to get the input of a mapper
Dear all, I am trying to get the input of a mapper briefly as follows: *vtkMapper* mapper = actor-GetMapper(); vtkDataSet* input = mapper-GetInput(); int numPoints = input-GetNumberOfPoints();* but faild. I found that the numPoints is A (such as 400) when the representation of a data is *Outline*, and B (such as 5500) when the representation of the same data is *Surface*. It seems that I only got part(s) of the whole data. Anyone would tell me what is wrong and how to get the whole data? Any advice would be appreciated! Thanks! ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
[Paraview] Parameter Filters
Hi, Is it possible to create new filters (such as Python Programmable Filter) which control parameter values of other filters? For instance, how to control a slice origin, normal plane and offset using some other new filter control parameter and some numerical formula to constrain slice to remain vertical? Thanking you. Sincerely, -- Ajjp V W ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] starting an animation before the first timestep
Thanks! Unfortunately the dataset is too big to save it as single images. But I solved the problem by adding a few files that were the same as the first time step to the beginning of my dataset. And then I can use your third idea to create the movie as I would like to. Leonie Original-Nachricht Datum: Thu, 1 Sep 2011 23:51:33 + Von: Scott, W Alan wasc...@sandia.gov An: Leonie Callies leonie.call...@gmx.de, paraview@paraview.org paraview@paraview.org Betreff: RE: [Paraview] starting an animation before the first timestep I can think of three ways. * Instead of save animation, use save screenshot. Then, manually create your images for the movie. * Same as above, but if you have any animations that need to be part of this, just write the animations down as individual images. * You could always use the Animation View, turning visibility of these sources and datasets on as time runs. Alan -Original Message- From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On Behalf Of Leonie Callies Sent: Thursday, September 01, 2011 4:29 PM To: paraview@paraview.org Subject: [Paraview] starting an animation before the first timestep Hi, I am trying to make a nice animation with paraview. What I would like to do is add, for instance, an outline, a certain geometry and maybe other sources and then show the timevariant dataset. But adding those sources should be part of the animation. So, basically, I want to start the animation before the first timestep of the dataset. How can I do that? Thanks for any help! Leonie -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] Highlighting pixels in an image
On Wed, Oct 27, 2010 at 1:57 PM, David Doria daviddo...@gmail.com wrote: On Wed, Oct 27, 2010 at 12:40 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Ah you're talking of 2D view. Yup, that's a missing feature. Can you add a bug to the bug tracker please? You should see the points in 3D view, however. Utkarsh You're right, it works as expected in the 3D view. I added the bug here: http://paraview.org/Bug/view.php?id=11372 Thanks, David I see that this bug is marked as expired - am I the only one that would want to do this? The problem seems to also go the opposite way - the selection tools are not available when in an image view. It seems very reasonable to be able to select a group of pixels from a meta image and inspect their values - is there any way to do this? Thanks, David ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
