Re: [Paraview] Plot probe value over time

[Zenker, Dr. Matthias]

Hi Utkarsh,

I'm afraid I don't understand what you mean. The string "select points" does 
not figure in the User's Guide. AFAIK I can select a point only if it is a 
node. But I would like to probe the temperature at a point which is located 
between nodes, so I need to interpolate. The interpolated temperature should be 
plotted over time.
So my question: How do I do that?

Thank you for a further explanation,

Matthias



Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
Gesendet: Dienstag, 13. November 2012 00:47
An: Zenker, Dr. Matthias
Cc: paraview@paraview.org
Betreff: Re: [Paraview] Plot probe value over time

Matthias,

Couldn't you create a "point" selection (either 'Select Points On' or 'Select 
Points Through') for the probed point itself and then do "Extract Selection 
Over Time"?

Utkarsh

On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias 
mailto:matthias.zen...@erbe-med.com>> wrote:
Hi,

I would like to plot a value (say, the temperature) at a specific point 
(coordinates) over time. If there is a node at that point, I can use the Plot 
Selection over Time Filter. If not, it should be possible to use interpolation. 
I can use the Probe Location Filter to define a point by its coordinates. But 
how do I plot the temperature over time at that point? I didn't manage to do 
that so far, and would be grateful for a helpful hint.

Thanks,

Matthias




_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview



_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] WG: Still cannot add to selection with Crtl key

[Zenker, Dr. Matthias]

Von: Zenker, Dr. Matthias
Gesendet: Dienstag, 13. November 2012 08:57
An: 'Utkarsh Ayachit'
Cc: paraview@paraview.org
Betreff: AW: [Paraview] Still cannot add to selection with Crtl key

I cannot use any OP other than Windows although I would love to... ;)
So the answer is: no, I didn't try anything other than Windows.

Thanks,

Matthias


Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
Gesendet: Dienstag, 13. November 2012 01:04
An: Zenker, Dr. Matthias
Cc: paraview@paraview.org
Betreff: Re: [Paraview] Still cannot add to selection with Crtl key

This seems to work for me on Linux and Mac (the only platforms I could test on 
as I am travelling). Have you tried these on anything other than Windows? I 
wonder if it's a Windows only problem. I will test on Windows once I get back 
later this week.

Utkarsh

On Thu, Nov 8, 2012 at 3:24 AM, Zenker, Dr. Matthias 
mailto:matthias.zen...@erbe-med.com>> wrote:
Hi,

in the new binary (3.98.0-RC1, Windows 32 bit), I still cannot add points to 
the current selection by holding the ctrl key (bug 0013056). Is there a 
workaround or fix in sight? I use this feature frequently, so I will have to 
stick with 3.12.0-RC2 until this is fixed (it doesn't work in 3.14 either).

Matthias



_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview



_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] problem for visualisation of contours on thin shell

[Luc Bordier]

I finally found the good settings for "Coincident Topology Resolution"
Thanks for the hint.

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] properties and display panels in 3.98.0-RC1

[Felipe Bordeu]

thanks

Le 13/11/2012 01:09, Utkarsh Ayachit a écrit :
You can use --use-old-panels command line argument, but we'd like to 
get rid of that in future. We expect cleaning up of the new properties 
panel in time and hopefully you won't need to use the option anymore :).



On Tue, Nov 6, 2012 at 9:52 AM, Felipe Bordeu 
mailto:felipe.bor...@ec-nantes.fr>> wrote:


Hi,

I'm working with ParaView 3.98.0-RC1 and I will like to recover
the 3.14 properties and display  panel.
I think is confusing. The properties panel is unique for each
filter but the display panel can be different, if 2 views are used.

Also normaly I put all the panel in one screen and the view in the
other screen.
But now I have a very long properties panel that I can't split in two.

Thanks
Felipe.

-- 


Felipe Bordeu Weldt
Ingénieur de Recherche
-
Tél. : 33 (0)2 40 37 16  57
Fax. : 33 (0)2 40 74 74  06
felipe.bor...@ec-nantes.fr 
Institut GeM - UMR CNRS 6183
École Centrale Nantes
1 Rue de La Noë, 44321 Nantes, FRANCE
-

___
Powered by www.kitware.com 

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview





--

Felipe Bordeu Weldt
Ingénieur de Recherche
-
Tél. : 33 (0)2 40 37 16 57
Fax. : 33 (0)2 40 74 74 06
felipe.bor...@ec-nantes.fr
Institut GeM - UMR CNRS 6183
École Centrale Nantes
1 Rue de La Noë, 44321 Nantes, FRANCE
-

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] 3.98-rc2 and multiple selections

[Andrew Parker]

Hi,

So as requested, I built the latest rc against 4.7.2 and that also happens
to be built against qt 4.8.3, and it compiles and installs fine. This is
built against openmpi 1.6.2 with use_mpi on.  However, I have noticed that
when loading multiple files around 20 of them, vtu's in this instance, each
representing a sub part of the domain, after apply is pressed it only opens
the last file in the list.  I had to go through each file, 20 odd and click
apply on each to see them all.  Don't know if this is a known bug, or is a
feature change and I'm now doing it incorrectly, but this does not behave
the same as 3.14.1 would be nice if you only needed to press apply once
as before.

Hope the info is useful,
Cheers,
Andy
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Plot probe value over time

[David E DeMarle]

The simplest way to do what you want is to use the "Probe Location"
filter to specify the point in space you want to sample values onto,
then use "Select Points On" to make a selection of that filter's
output. Finally apply "Plot Selection over Time".

David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909


On Tue, Nov 13, 2012 at 3:14 AM, Zenker, Dr. Matthias
 wrote:
> Hi Utkarsh,
>
>
>
> I’m afraid I don’t understand what you mean. The string “select points” does
> not figure in the User’s Guide. AFAIK I can select a point only if it is a
> node. But I would like to probe the temperature at a point which is located
> between nodes, so I need to interpolate. The interpolated temperature should
> be plotted over time.
>
> So my question: How do I do that?
>
>
>
> Thank you for a further explanation,
>
>
>
> Matthias
>
>
>
>
>
>
>
> Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
> Gesendet: Dienstag, 13. November 2012 00:47
> An: Zenker, Dr. Matthias
> Cc: paraview@paraview.org
> Betreff: Re: [Paraview] Plot probe value over time
>
>
>
> Matthias,
>
>
>
> Couldn't you create a "point" selection (either 'Select Points On' or
> 'Select Points Through') for the probed point itself and then do "Extract
> Selection Over Time"?
>
>
>
> Utkarsh
>
>
>
> On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias
>  wrote:
>
> Hi,
>
>
>
> I would like to plot a value (say, the temperature) at a specific point
> (coordinates) over time. If there is a node at that point, I can use the
> Plot Selection over Time Filter. If not, it should be possible to use
> interpolation. I can use the Probe Location Filter to define a point by its
> coordinates. But how do I plot the temperature over time at that point? I
> didn’t manage to do that so far, and would be grateful for a helpful hint.
>
>
>
> Thanks,
>
>
>
> Matthias
>
>
>
>
>
>
>
> _
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
>
>
> ___
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>
>
>
>
>
> _
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
>
>
> ___
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Plot probe value over time

[Zenker, Dr. Matthias]

Hi,

I can't get it to work.
I have specified a point with "Probe Location", clicked on "Select Points On", 
and selected the cross generated by "Probe Location". But "Plot Selection Over 
Time" gives an empty plot. "Extract Selection" doesn't help either. Obviously I 
am missing something, but what?

Thank you,

Matthias

P.S.: I have tried with both 3.12.0-RC2 and 3.98.0-RC1 under Windows XP (32bit).

> -Ursprüngliche Nachricht-
> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> Gesendet: Dienstag, 13. November 2012 13:55
> An: Zenker, Dr. Matthias
> Cc: Utkarsh Ayachit; paraview@paraview.org
> Betreff: Re: [Paraview] Plot probe value over time
>
> The simplest way to do what you want is to use the "Probe Location"
> filter to specify the point in space you want to sample values onto, then use
> "Select Points On" to make a selection of that filter's output. Finally apply
> "Plot Selection over Time".
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
> On Tue, Nov 13, 2012 at 3:14 AM, Zenker, Dr. Matthias
>  wrote:
> > Hi Utkarsh,
> >
> >
> >
> > I'm afraid I don't understand what you mean. The string "select
> > points" does not figure in the User's Guide. AFAIK I can select a
> > point only if it is a node. But I would like to probe the temperature
> > at a point which is located between nodes, so I need to interpolate.
> > The interpolated temperature should be plotted over time.
> >
> > So my question: How do I do that?
> >
> >
> >
> > Thank you for a further explanation,
> >
> >
> >
> > Matthias
> >
> >
> >
> >
> >
> >
> >
> > Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
> > Gesendet: Dienstag, 13. November 2012 00:47
> > An: Zenker, Dr. Matthias
> > Cc: paraview@paraview.org
> > Betreff: Re: [Paraview] Plot probe value over time
> >
> >
> >
> > Matthias,
> >
> >
> >
> > Couldn't you create a "point" selection (either 'Select Points On' or
> > 'Select Points Through') for the probed point itself and then do
> > "Extract Selection Over Time"?
> >
> >
> >
> > Utkarsh
> >
> >
> >
> > On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias
> >  wrote:
> >
> > Hi,
> >
> >
> >
> > I would like to plot a value (say, the temperature) at a specific
> > point
> > (coordinates) over time. If there is a node at that point, I can use
> > the Plot Selection over Time Filter. If not, it should be possible to
> > use interpolation. I can use the Probe Location Filter to define a
> > point by its coordinates. But how do I plot the temperature over time
> > at that point? I didn't manage to do that so far, and would be grateful for 
> > a
> helpful hint.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Matthias
> >
> >
> >
> >
> >
> >
> >
> >
> __
> ___
> > ERBE Elektromedizin GmbH
> > Firmensitz: 72072 Tuebingen
> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> > Registergericht: Stuttgart HRB 380137
> >
> >
> > ___
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> >
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
> >
> >
> >
> >
> >
> >
> __
> ___
> > ERBE Elektromedizin GmbH
> > Firmensitz: 72072 Tuebingen
> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> > Registergericht: Stuttgart HRB 380137
> >
> >
> > ___
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> >
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
> >


_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Plot probe value over time

[David E DeMarle]

I don't know. Works for me using the can.ex2 data set with 3.12 or
3.98 binaries on mac.

David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909


On Tue, Nov 13, 2012 at 8:28 AM, Zenker, Dr. Matthias
 wrote:
> Hi,
>
> I can't get it to work.
> I have specified a point with "Probe Location", clicked on "Select Points 
> On", and selected the cross generated by "Probe Location". But "Plot 
> Selection Over Time" gives an empty plot. "Extract Selection" doesn't help 
> either. Obviously I am missing something, but what?
>
> Thank you,
>
> Matthias
>
> P.S.: I have tried with both 3.12.0-RC2 and 3.98.0-RC1 under Windows XP 
> (32bit).
>
>> -Ursprüngliche Nachricht-
>> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
>> Gesendet: Dienstag, 13. November 2012 13:55
>> An: Zenker, Dr. Matthias
>> Cc: Utkarsh Ayachit; paraview@paraview.org
>> Betreff: Re: [Paraview] Plot probe value over time
>>
>> The simplest way to do what you want is to use the "Probe Location"
>> filter to specify the point in space you want to sample values onto, then use
>> "Select Points On" to make a selection of that filter's output. Finally apply
>> "Plot Selection over Time".
>>
>> David E DeMarle
>> Kitware, Inc.
>> R&D Engineer
>> 21 Corporate Drive
>> Clifton Park, NY 12065-8662
>> Phone: 518-881-4909
>>
>>
>> On Tue, Nov 13, 2012 at 3:14 AM, Zenker, Dr. Matthias
>>  wrote:
>> > Hi Utkarsh,
>> >
>> >
>> >
>> > I'm afraid I don't understand what you mean. The string "select
>> > points" does not figure in the User's Guide. AFAIK I can select a
>> > point only if it is a node. But I would like to probe the temperature
>> > at a point which is located between nodes, so I need to interpolate.
>> > The interpolated temperature should be plotted over time.
>> >
>> > So my question: How do I do that?
>> >
>> >
>> >
>> > Thank you for a further explanation,
>> >
>> >
>> >
>> > Matthias
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> > Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
>> > Gesendet: Dienstag, 13. November 2012 00:47
>> > An: Zenker, Dr. Matthias
>> > Cc: paraview@paraview.org
>> > Betreff: Re: [Paraview] Plot probe value over time
>> >
>> >
>> >
>> > Matthias,
>> >
>> >
>> >
>> > Couldn't you create a "point" selection (either 'Select Points On' or
>> > 'Select Points Through') for the probed point itself and then do
>> > "Extract Selection Over Time"?
>> >
>> >
>> >
>> > Utkarsh
>> >
>> >
>> >
>> > On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias
>> >  wrote:
>> >
>> > Hi,
>> >
>> >
>> >
>> > I would like to plot a value (say, the temperature) at a specific
>> > point
>> > (coordinates) over time. If there is a node at that point, I can use
>> > the Plot Selection over Time Filter. If not, it should be possible to
>> > use interpolation. I can use the Probe Location Filter to define a
>> > point by its coordinates. But how do I plot the temperature over time
>> > at that point? I didn't manage to do that so far, and would be grateful 
>> > for a
>> helpful hint.
>> >
>> >
>> >
>> > Thanks,
>> >
>> >
>> >
>> > Matthias
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> __
>> ___
>> > ERBE Elektromedizin GmbH
>> > Firmensitz: 72072 Tuebingen
>> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
>> > Registergericht: Stuttgart HRB 380137
>> >
>> >
>> > ___
>> > Powered by www.kitware.com
>> >
>> > Visit other Kitware open-source projects at
>> > http://www.kitware.com/opensource/opensource.html
>> >
>> > Please keep messages on-topic and check the ParaView Wiki at:
>> > http://paraview.org/Wiki/ParaView
>> >
>> > Follow this link to subscribe/unsubscribe:
>> > http://www.paraview.org/mailman/listinfo/paraview
>> >
>> >
>> >
>> >
>> >
>> >
>> __
>> ___
>> > ERBE Elektromedizin GmbH
>> > Firmensitz: 72072 Tuebingen
>> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
>> > Registergericht: Stuttgart HRB 380137
>> >
>> >
>> > ___
>> > Powered by www.kitware.com
>> >
>> > Visit other Kitware open-source projects at
>> > http://www.kitware.com/opensource/opensource.html
>> >
>> > Please keep messages on-topic and check the ParaView Wiki at:
>> > http://paraview.org/Wiki/ParaView
>> >
>> > Follow this link to subscribe/unsubscribe:
>> > http://www.paraview.org/mailman/listinfo/paraview
>> >
>
>
> _
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
>
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://pa

Re: [Paraview] Plot probe value over time

[Zenker, Dr. Matthias]

Hmmm...
Can anybody on the list confirm that this works under Windows?
If it doesn't, could this be a bug?
Is the can.ex2 dataset available somewhere so that I can exclude that the fault 
is in my dataset?

Matthias


> -Ursprüngliche Nachricht-
> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> Gesendet: Dienstag, 13. November 2012 14:35
> An: Zenker, Dr. Matthias
> Cc: Utkarsh Ayachit; paraview@paraview.org
> Betreff: Re: [Paraview] Plot probe value over time
>
> I don't know. Works for me using the can.ex2 data set with 3.12 or
> 3.98 binaries on mac.
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
> On Tue, Nov 13, 2012 at 8:28 AM, Zenker, Dr. Matthias
>  wrote:
> > Hi,
> >
> > I can't get it to work.
> > I have specified a point with "Probe Location", clicked on "Select Points
> On", and selected the cross generated by "Probe Location". But "Plot
> Selection Over Time" gives an empty plot. "Extract Selection" doesn't help
> either. Obviously I am missing something, but what?
> >
> > Thank you,
> >
> > Matthias
> >
> > P.S.: I have tried with both 3.12.0-RC2 and 3.98.0-RC1 under Windows XP
> (32bit).
> >
> >> -Ursprüngliche Nachricht-
> >> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> >> Gesendet: Dienstag, 13. November 2012 13:55
> >> An: Zenker, Dr. Matthias
> >> Cc: Utkarsh Ayachit; paraview@paraview.org
> >> Betreff: Re: [Paraview] Plot probe value over time
> >>
> >> The simplest way to do what you want is to use the "Probe Location"
> >> filter to specify the point in space you want to sample values onto,
> >> then use "Select Points On" to make a selection of that filter's
> >> output. Finally apply "Plot Selection over Time".
> >>
> >> David E DeMarle
> >> Kitware, Inc.
> >> R&D Engineer
> >> 21 Corporate Drive
> >> Clifton Park, NY 12065-8662
> >> Phone: 518-881-4909
> >>
> >>
> >> On Tue, Nov 13, 2012 at 3:14 AM, Zenker, Dr. Matthias
> >>  wrote:
> >> > Hi Utkarsh,
> >> >
> >> >
> >> >
> >> > I'm afraid I don't understand what you mean. The string "select
> >> > points" does not figure in the User's Guide. AFAIK I can select a
> >> > point only if it is a node. But I would like to probe the
> >> > temperature at a point which is located between nodes, so I need to
> interpolate.
> >> > The interpolated temperature should be plotted over time.
> >> >
> >> > So my question: How do I do that?
> >> >
> >> >
> >> >
> >> > Thank you for a further explanation,
> >> >
> >> >
> >> >
> >> > Matthias
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
> >> > Gesendet: Dienstag, 13. November 2012 00:47
> >> > An: Zenker, Dr. Matthias
> >> > Cc: paraview@paraview.org
> >> > Betreff: Re: [Paraview] Plot probe value over time
> >> >
> >> >
> >> >
> >> > Matthias,
> >> >
> >> >
> >> >
> >> > Couldn't you create a "point" selection (either 'Select Points On'
> >> > or 'Select Points Through') for the probed point itself and then do
> >> > "Extract Selection Over Time"?
> >> >
> >> >
> >> >
> >> > Utkarsh
> >> >
> >> >
> >> >
> >> > On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias
> >> >  wrote:
> >> >
> >> > Hi,
> >> >
> >> >
> >> >
> >> > I would like to plot a value (say, the temperature) at a specific
> >> > point
> >> > (coordinates) over time. If there is a node at that point, I can
> >> > use the Plot Selection over Time Filter. If not, it should be
> >> > possible to use interpolation. I can use the Probe Location Filter
> >> > to define a point by its coordinates. But how do I plot the
> >> > temperature over time at that point? I didn't manage to do that so
> >> > far, and would be grateful for a
> >> helpful hint.
> >> >
> >> >
> >> >
> >> > Thanks,
> >> >
> >> >
> >> >
> >> > Matthias
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> __
> >> ___
> >> > ERBE Elektromedizin GmbH
> >> > Firmensitz: 72072 Tuebingen
> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> > Registergericht: Stuttgart HRB 380137
> >> >
> >> >
> >> > ___
> >> > Powered by www.kitware.com
> >> >
> >> > Visit other Kitware open-source projects at
> >> > http://www.kitware.com/opensource/opensource.html
> >> >
> >> > Please keep messages on-topic and check the ParaView Wiki at:
> >> > http://paraview.org/Wiki/ParaView
> >> >
> >> > Follow this link to subscribe/unsubscribe:
> >> > http://www.paraview.org/mailman/listinfo/paraview
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> __
> >> ___
> >> > ERBE Elektromedizin GmbH
> >> > Firmensitz: 72072 Tuebingen
> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> > Registergericht: Stuttgart HRB 380137
> >> >
> >> >
> >> > ___
> >> > Powered by www.kitware.com
>

Re: [Paraview] 3.98-rc2 and multiple selections

[Kyle Lutz]

Hi Andy,

This is a known bug (http://paraview.org/Bug/view.php?id=13494) that
I'm working on. It will be fixed for the final 3.98 release.

-kyle

On Tue, Nov 13, 2012 at 2:59 AM, Andrew Parker
 wrote:
> Hi,
>
> So as requested, I built the latest rc against 4.7.2 and that also happens
> to be built against qt 4.8.3, and it compiles and installs fine. This is
> built against openmpi 1.6.2 with use_mpi on.  However, I have noticed that
> when loading multiple files around 20 of them, vtu's in this instance, each
> representing a sub part of the domain, after apply is pressed it only opens
> the last file in the list.  I had to go through each file, 20 odd and click
> apply on each to see them all.  Don't know if this is a known bug, or is a
> feature change and I'm now doing it incorrectly, but this does not behave
> the same as 3.14.1 would be nice if you only needed to press apply once
> as before.
>
> Hope the info is useful,
> Cheers,
> Andy
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Undefined symbols when building an example reader plugin

[Cory Quammen]

Takuya,

I have a similar problem with a simple VTK filter plugin and a
representation plugin. Unfortunately, I don't have a better solution
than what you propose, but I just wanted to confirm that this is a new
problem, at least on Mac OS X.

Cory

On Wed, Nov 7, 2012 at 9:19 PM, Takuya OSHIMA
 wrote:
> Hi,
>
> With today's git-master, building ParaView/Examples/Plugins/Reader on
> OS X 10.6.8, CMake 2.8.10, Qt 4.8.3 fails in the final linking stage
> stating:
>
> Undefined symbols:
>   "vtkRenderingMatplotlib_AutoInit_Construct()", referenced from:
>   __static_initialization_and_destruction_0(int, int)in 
> MyPNGReader_Plugin.o
>   __static_initialization_and_destruction_0(int, int)in 
> moc_MyPNGReader_Plugin.o
>   "vtkRenderingMatplotlib_AutoInit_Destruct()", referenced from:
>   ___tcf_7 in MyPNGReader_Plugin.o
>   ___tcf_5 in moc_MyPNGReader_Plugin.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[2]: *** [libMyPNGReader.dylib] Error 1
> make[1]: *** [CMakeFiles/MyPNGReader.dir/all] Error 2
> make: *** [all] Error 2
>
> which is what I also have with my reader plugin. I know there is an
> easy workaround of adding vtkRenderingMatplotlib as one of
> TARGET_LINK_LIBRARIES but is this what I have to do?
>
> Takuya OSHIMA, Ph.D.
> Faculty of Engineering, Niigata University
> 8050 Ikarashi-Ninocho, Nishi-ku, Niigata, 950-2181, JAPAN
> ___
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at 
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: 
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview



-- 
Cory Quammen
Research Associate
Department of Computer Science
The University of North Carolina at Chapel Hill
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Undefined symbols when building an example reader plugin

[Cory Quammen]

Just a followup:

My plugins build and link against ParaView 3.98-RC1 without error, so
a regression has been introduced since then.

Cory

On Tue, Nov 13, 2012 at 9:50 AM, Cory Quammen  wrote:
> Takuya,
>
> I have a similar problem with a simple VTK filter plugin and a
> representation plugin. Unfortunately, I don't have a better solution
> than what you propose, but I just wanted to confirm that this is a new
> problem, at least on Mac OS X.
>
> Cory
>
> On Wed, Nov 7, 2012 at 9:19 PM, Takuya OSHIMA
>  wrote:
>> Hi,
>>
>> With today's git-master, building ParaView/Examples/Plugins/Reader on
>> OS X 10.6.8, CMake 2.8.10, Qt 4.8.3 fails in the final linking stage
>> stating:
>>
>> Undefined symbols:
>>   "vtkRenderingMatplotlib_AutoInit_Construct()", referenced from:
>>   __static_initialization_and_destruction_0(int, int)in 
>> MyPNGReader_Plugin.o
>>   __static_initialization_and_destruction_0(int, int)in 
>> moc_MyPNGReader_Plugin.o
>>   "vtkRenderingMatplotlib_AutoInit_Destruct()", referenced from:
>>   ___tcf_7 in MyPNGReader_Plugin.o
>>   ___tcf_5 in moc_MyPNGReader_Plugin.o
>> ld: symbol(s) not found
>> collect2: ld returned 1 exit status
>> make[2]: *** [libMyPNGReader.dylib] Error 1
>> make[1]: *** [CMakeFiles/MyPNGReader.dir/all] Error 2
>> make: *** [all] Error 2
>>
>> which is what I also have with my reader plugin. I know there is an
>> easy workaround of adding vtkRenderingMatplotlib as one of
>> TARGET_LINK_LIBRARIES but is this what I have to do?
>>
>> Takuya OSHIMA, Ph.D.
>> Faculty of Engineering, Niigata University
>> 8050 Ikarashi-Ninocho, Nishi-ku, Niigata, 950-2181, JAPAN
>> ___
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at 
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at: 
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview
>
>
>
> --
> Cory Quammen
> Research Associate
> Department of Computer Science
> The University of North Carolina at Chapel Hill



-- 
Cory Quammen
Research Associate
Department of Computer Science
The University of North Carolina at Chapel Hill
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Undefined symbols when building an example reader plugin

[David Lonie]

On Tue, Nov 13, 2012 at 10:44 AM, Cory Quammen  wrote:
> Just a followup:
>
> My plugins build and link against ParaView 3.98-RC1 without error, so
> a regression has been introduced since then.
>
> Cory
>
> On Tue, Nov 13, 2012 at 9:50 AM, Cory Quammen  wrote:
>> Takuya,
>>
>> I have a similar problem with a simple VTK filter plugin and a
>> representation plugin. Unfortunately, I don't have a better solution
>> than what you propose, but I just wanted to confirm that this is a new
>> problem, at least on Mac OS X.
>>
>> Cory

The quick work-around is to link your plugin against
vtkRenderingMatplotlib when python is enabled. We do this for part of
the CoProcessing plugin that comes with ParaView. This is not a good
long term solution IMO, but hopefully someone with a better knowledge
of the modular build system can propose a better solution...

Dave
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Undefined symbols when building an example reader plugin

[Cory Quammen]

On Tue, Nov 13, 2012 at 11:05 AM, David Lonie  wrote:
> On Tue, Nov 13, 2012 at 10:44 AM, Cory Quammen  wrote:
>> Just a followup:
>>
>> My plugins build and link against ParaView 3.98-RC1 without error, so
>> a regression has been introduced since then.
>>
>> Cory
>>
>> On Tue, Nov 13, 2012 at 9:50 AM, Cory Quammen  wrote:
>>> Takuya,
>>>
>>> I have a similar problem with a simple VTK filter plugin and a
>>> representation plugin. Unfortunately, I don't have a better solution
>>> than what you propose, but I just wanted to confirm that this is a new
>>> problem, at least on Mac OS X.
>>>
>>> Cory
>
> The quick work-around is to link your plugin against
> vtkRenderingMatplotlib when python is enabled. We do this for part of
> the CoProcessing plugin that comes with ParaView. This is not a good
> long term solution IMO, but hopefully someone with a better knowledge
> of the modular build system can propose a better solution...
>
> Dave

Dav,

The patch you made in commit c369423b81ab182e7af26ed6dec90458ada9b77b
appears to have introduced the error. I'll try to come up with a fix.

Cory

-- 
Cory Quammen
Research Associate
Department of Computer Science
The University of North Carolina at Chapel Hill
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: Plot probe value over time

[Scott, W Alan]

can.ex2 (also often renamed can.exo) and disk_out_ref.ex2 (also often renamed 
disk_out_ref.exo) are two workhorse, very small datasets that are in the 
ParaView data download.  Go to the ParaView web site, Resources/ Downloads/ 
Type of Download/ Data, Documents and Tutorials.

can.ex2 has two blocks, and time data.
disk_out_ref.ex2 includes temperature, pressure and a vector field.

Alan

-Original Message-
From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On 
Behalf Of Zenker, Dr. Matthias
Sent: Tuesday, November 13, 2012 6:46 AM
To: DeMarle, David Edward (External Contacts)
Cc: paraview@paraview.org
Subject: [EXTERNAL] Re: [Paraview] Plot probe value over time

Hmmm...
Can anybody on the list confirm that this works under Windows?
If it doesn't, could this be a bug?
Is the can.ex2 dataset available somewhere so that I can exclude that the fault 
is in my dataset?

Matthias


> -Ursprüngliche Nachricht-
> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> Gesendet: Dienstag, 13. November 2012 14:35
> An: Zenker, Dr. Matthias
> Cc: Utkarsh Ayachit; paraview@paraview.org
> Betreff: Re: [Paraview] Plot probe value over time
>
> I don't know. Works for me using the can.ex2 data set with 3.12 or
> 3.98 binaries on mac.
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
> On Tue, Nov 13, 2012 at 8:28 AM, Zenker, Dr. Matthias 
>  wrote:
> > Hi,
> >
> > I can't get it to work.
> > I have specified a point with "Probe Location", clicked on "Select 
> > Points
> On", and selected the cross generated by "Probe Location". But "Plot 
> Selection Over Time" gives an empty plot. "Extract Selection" doesn't 
> help either. Obviously I am missing something, but what?
> >
> > Thank you,
> >
> > Matthias
> >
> > P.S.: I have tried with both 3.12.0-RC2 and 3.98.0-RC1 under Windows 
> > XP
> (32bit).
> >
> >> -Ursprüngliche Nachricht-
> >> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> >> Gesendet: Dienstag, 13. November 2012 13:55
> >> An: Zenker, Dr. Matthias
> >> Cc: Utkarsh Ayachit; paraview@paraview.org
> >> Betreff: Re: [Paraview] Plot probe value over time
> >>
> >> The simplest way to do what you want is to use the "Probe Location"
> >> filter to specify the point in space you want to sample values 
> >> onto, then use "Select Points On" to make a selection of that 
> >> filter's output. Finally apply "Plot Selection over Time".
> >>
> >> David E DeMarle
> >> Kitware, Inc.
> >> R&D Engineer
> >> 21 Corporate Drive
> >> Clifton Park, NY 12065-8662
> >> Phone: 518-881-4909
> >>
> >>
> >> On Tue, Nov 13, 2012 at 3:14 AM, Zenker, Dr. Matthias 
> >>  wrote:
> >> > Hi Utkarsh,
> >> >
> >> >
> >> >
> >> > I'm afraid I don't understand what you mean. The string "select 
> >> > points" does not figure in the User's Guide. AFAIK I can select a 
> >> > point only if it is a node. But I would like to probe the 
> >> > temperature at a point which is located between nodes, so I need 
> >> > to
> interpolate.
> >> > The interpolated temperature should be plotted over time.
> >> >
> >> > So my question: How do I do that?
> >> >
> >> >
> >> >
> >> > Thank you for a further explanation,
> >> >
> >> >
> >> >
> >> > Matthias
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
> >> > Gesendet: Dienstag, 13. November 2012 00:47
> >> > An: Zenker, Dr. Matthias
> >> > Cc: paraview@paraview.org
> >> > Betreff: Re: [Paraview] Plot probe value over time
> >> >
> >> >
> >> >
> >> > Matthias,
> >> >
> >> >
> >> >
> >> > Couldn't you create a "point" selection (either 'Select Points On'
> >> > or 'Select Points Through') for the probed point itself and then 
> >> > do "Extract Selection Over Time"?
> >> >
> >> >
> >> >
> >> > Utkarsh
> >> >
> >> >
> >> >
> >> > On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias 
> >> >  wrote:
> >> >
> >> > Hi,
> >> >
> >> >
> >> >
> >> > I would like to plot a value (say, the temperature) at a specific 
> >> > point
> >> > (coordinates) over time. If there is a node at that point, I can 
> >> > use the Plot Selection over Time Filter. If not, it should be 
> >> > possible to use interpolation. I can use the Probe Location 
> >> > Filter to define a point by its coordinates. But how do I plot 
> >> > the temperature over time at that point? I didn't manage to do 
> >> > that so far, and would be grateful for a
> >> helpful hint.
> >> >
> >> >
> >> >
> >> > Thanks,
> >> >
> >> >
> >> >
> >> > Matthias
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> __
> >> ___
> >> > ERBE Elektromedizin GmbH
> >> > Firmensitz: 72072 Tuebingen
> >> > Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> >> > Registergericht: Stuttgart HRB 380137
> >> >
> >> >
> >> > ___
> >> > Powered by www.kitware.com
> >

Re: [Paraview] Undefined symbols when building an example reader plugin

[David Lonie]

On Tue, Nov 13, 2012 at 11:05 AM, David Lonie  wrote:
> On Tue, Nov 13, 2012 at 10:44 AM, Cory Quammen  wrote:
>> Just a followup:
>>
>> My plugins build and link against ParaView 3.98-RC1 without error, so
>> a regression has been introduced since then.
>>
>> Cory
>>
>> On Tue, Nov 13, 2012 at 9:50 AM, Cory Quammen  wrote:
>>> Takuya,
>>>
>>> I have a similar problem with a simple VTK filter plugin and a
>>> representation plugin. Unfortunately, I don't have a better solution
>>> than what you propose, but I just wanted to confirm that this is a new
>>> problem, at least on Mac OS X.
>>>
>>> Cory
>
> The quick work-around is to link your plugin against
> vtkRenderingMatplotlib when python is enabled. We do this for part of
> the CoProcessing plugin that comes with ParaView. This is not a good
> long term solution IMO, but hopefully someone with a better knowledge
> of the modular build system can propose a better solution...

A better solution was pointed out to me off-list -- try adding

include(${PARAVIEW_USE_FILE})

and then linking against ${VTK_LIBRARIES}. This should be better in
the long-term.

Dave
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: Still cannot add to selection with Crtl key

[Scott, W Alan]

Utkarsh,
I tried this on Linux, and it works fine.
I tried this windows (master pull from about last Friday, November 10), and it 
does not work.  Not sure if it is related, but my debug build outputs the 
following warning:

Generic Warning: In 
..\..\..\..\..\src\ParaView3\ParaViewCore\ServerManager\Core\vtkSMPropertyHelper.cxx,
 line 408
Call not supported for the current property type.

Matthias, if you have not already, please write this up as a bug.

Alan

From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org] On 
Behalf Of Utkarsh Ayachit
Sent: Monday, November 12, 2012 5:04 PM
To: Zenker, Dr. Matthias
Cc: paraview@paraview.org
Subject: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

This seems to work for me on Linux and Mac (the only platforms I could test on 
as I am travelling). Have you tried these on anything other than Windows? I 
wonder if it's a Windows only problem. I will test on Windows once I get back 
later this week.

Utkarsh

On Thu, Nov 8, 2012 at 3:24 AM, Zenker, Dr. Matthias 
mailto:matthias.zen...@erbe-med.com>> wrote:
Hi,

in the new binary (3.98.0-RC1, Windows 32 bit), I still cannot add points to 
the current selection by holding the ctrl key (bug 0013056). Is there a 
workaround or fix in sight? I use this feature frequently, so I will have to 
stick with 3.12.0-RC2 until this is fixed (it doesn't work in 3.14 either).

Matthias



_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: Still cannot add to selection with Crtl key

[Kevin H. Hobbs]

On 11/13/2012 12:05 PM, Scott, W Alan wrote:
> Utkarsh,
> 
> I tried this on Linux, and it works fine.
> 

I just tried to  select multiple sets of points with the version
of ParaView on Fedora 17.

I was able to select multiple sets of points with the "Select Points On"
button but not with the "Select Points Through" button.




signature.asc
Description: OpenPGP digital signature
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] CoProcessing needed fields

[Andy Bauer]

Hi Tim,

Sorry for the slow reply. I'm away at a conference.

It shouldn't matter how the data object was created in the adaptor.

For the life of me, I can't figure out why you're getting this behavior.
You can probably just take out the IsFieldNeeded() check in
coprocessingwrap.cxx. You should be making sure that if flag is set to 0 in
your checktime_() method that the grid and fields aren't reconstructed
anyways and you can skip the call to coprocess_().

Andy

On Fri, Nov 9, 2012 at 3:45 PM, Tim Gallagher wrote:

> Andy,
>
> Attached are the outputs. wavelet.tar.gz is from your script,
> cpModif.tar.gz are the images from my modified version and cpOrig.tar.gz is
> the output from the original script exported from PV.
>
> Clearly the wavelet works. Does it have something to do with using a VTK
> generator (pvsimple.Wavelet()) vs generating a CP script from a loaded data
> file?
>
> In other words, this wavelet example and the example online use a VTK data
> generator so the pipeline knows what fields are generated and thus what are
> needed. But, in my case, I set up my CP script by loading an Xdmf file.
> There must be some magic that goes on inside the XdmfReader that sets the
> fields available, just like the wavelet generator does? And since CP isn't
> using the Xdmf reader but I am building the VTK dataset myself, I need to
> do the same field-setting magic?
>
> If that's the case, then it should be true for a CP script generated from
> *any* data file reader. I know when I open my data file I get to choose
> which fields to load. Maybe this should be added to the export state script
> (which is what I did by hand) automatically? Like it is in the python trace
> file?
>
> Tim
>
> --
> *From: *"Andy Bauer" 
> *To: *"tim gallagher" 
> *Cc: *"ParaView list" 
> *Sent: *Friday, November 9, 2012 4:21:48 PM
>
> *Subject: *Re: [Paraview] CoProcessing needed fields
>
> I can't tell for sure but what are you using as inputName in
> ParaViewCoProcessor.cxx? It should be 'input'. Also, how many time steps
> have you run? It should output information only every 10th time step.
>
> Can you try running the attached files as "/pvbatch
> waveletdriver.py cpwaveletrender.py 5" and send me the output? This should
> generate 5 images. You should probably update your paraview source too
> before doing this as a couple of bugs got fixed that may be required to run
> this example.
>
> Andy
>
> On Thu, Nov 8, 2012 at 8:02 PM, Tim Gallagher wrote:
>
>> That was also a bug that resulted in errors I fixed, it wasn't what is
>> causing this other issue.
>>
>> Attached is a tar file with a few files:
>>
>> cpScript_orig.py is what comes out of Python, but after I changed the
>> write_frequencies thing to get rid of the quotes. That generates an image
>> where the slice is gray.
>>
>> cpScript.py is the one I modified to add the needed fields. This
>> generates an image where the slice is colored by the colormap. This is the
>> PNG file in the tar file.
>>
>> coprocessingwrap.cxx is the interface for Fortran.
>>
>> ParaviewCoProcessor.hxx/cxx is the class to handle the CP handles.
>>
>> This is called from a Fortran code where each time step it calls a
>> function that does:
>>
>>CALL ClearData(...)
>>CALL CheckTime(...)
>>
>>DO blk = 1, numBlocks
>> 
>> CALL AddData(...)
>>END DO
>>
>>CALL CoProcess(...)
>>
>> All those functions are in the wrapper C++ code.
>>
>> I may be doing something horribly wrong... But it works when I modified
>> the script as you see in cpScript.py.
>>
>> Thanks,
>>
>> Tim
>>
>> --
>> *From: *"Andy Bauer" 
>> *To: *"tim gallagher" 
>> *Cc: *"ParaView list" 
>> *Sent: *Thursday, November 8, 2012 7:47:50 PM
>>
>> *Subject: *Re: [Paraview] CoProcessing needed fields
>>
>> Ah, I think I see what's going on now. I think it was a bug in the
>> generated scripts that was causing problems. Were you getting something
>> like the following in your script:
>> write_frequencies= {'input': ['1']}
>>
>> The bug was that the 1 shouldn't be in quotes. If you take that out do
>> you start getting the results you expect? If not, can you share your
>> generated Python script?
>>
>> Andy
>>
>>
>> On Thu, Nov 8, 2012 at 6:41 PM, Tim Gallagher 
>> wrote:
>>
>>> Andy,
>>>
>>> Thanks for the answer.
>>>
>>> What I'm doing doesn't use any writers -- I just want the CoProcessor to
>>> output images only. So I don't attach a writer, I just export the state and
>>> tell it to "Output Rendering Components". My pipeline looks like:
>>>
>>> Load file -> CellDataToPointData -> Slice
>>>
>>> This results in a RequestDataDescription:
>>>
>>> def RequestDataDescription(datadescription):
>>> "Callback to populate the request for current timestep"
>>> if datadescription.GetForceOutput() == True:
>>> for i in range(datadescription.GetNumberOfInputDescriptions()):
>>> datadescription.GetInputDescription(i).AllFieldsOn

Re: [Paraview] Undefined symbols when building an example reader plugin

[Utkarsh Ayachit]

I think need to fix this. Plugins should not need to link against anything 
extra unless they explicitly add dependencies on other modules. 

Cory, temporarily fix the issue as david suggested but we'll have that fixed 
before the release so you won't have to. 

Utkarsh 


On Nov 13, 2012, at 9:26 AM, David Lonie  wrote:

> On Tue, Nov 13, 2012 at 11:05 AM, David Lonie  wrote:
>> On Tue, Nov 13, 2012 at 10:44 AM, Cory Quammen  wrote:
>>> Just a followup:
>>> 
>>> My plugins build and link against ParaView 3.98-RC1 without error, so
>>> a regression has been introduced since then.
>>> 
>>> Cory
>>> 
>>> On Tue, Nov 13, 2012 at 9:50 AM, Cory Quammen  wrote:
 Takuya,
 
 I have a similar problem with a simple VTK filter plugin and a
 representation plugin. Unfortunately, I don't have a better solution
 than what you propose, but I just wanted to confirm that this is a new
 problem, at least on Mac OS X.
 
 Cory
>> 
>> The quick work-around is to link your plugin against
>> vtkRenderingMatplotlib when python is enabled. We do this for part of
>> the CoProcessing plugin that comes with ParaView. This is not a good
>> long term solution IMO, but hopefully someone with a better knowledge
>> of the modular build system can propose a better solution...
> 
> A better solution was pointed out to me off-list -- try adding
> 
> include(${PARAVIEW_USE_FILE})
> 
> and then linking against ${VTK_LIBRARIES}. This should be better in
> the long-term.
> 
> Dave
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at 
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at: 
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: Still cannot add to selection with Crtl key

[Utkarsh Ayachit]

Indeed, only 'select point/cell on' are supported and not select through. I'll 
give it a more through test once I get back at office later this week. 

Utkarsh 



On Nov 13, 2012, at 10:23 AM, "Kevin H. Hobbs"  wrote:

> On 11/13/2012 12:05 PM, Scott, W Alan wrote:
>> Utkarsh,
>> 
>> I tried this on Linux, and it works fine.
> 
> I just tried to  select multiple sets of points with the version
> of ParaView on Fedora 17.
> 
> I was able to select multiple sets of points with the "Select Points On"
> button but not with the "Select Points Through" button.
> 
> 
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Undefined symbols when building an example reader plugin

[Cory Quammen]

Thanks, Utkarsh.

I filed a bug report: http://paraview.org/Bug/view.php?id=13652

Cory

On Tue, Nov 13, 2012 at 12:37 PM, Utkarsh Ayachit
 wrote:
> I think need to fix this. Plugins should not need to link against anything 
> extra unless they explicitly add dependencies on other modules.
>
> Cory, temporarily fix the issue as david suggested but we'll have that fixed 
> before the release so you won't have to.
>
> Utkarsh
>
>
> On Nov 13, 2012, at 9:26 AM, David Lonie  wrote:
>
>> On Tue, Nov 13, 2012 at 11:05 AM, David Lonie  
>> wrote:
>>> On Tue, Nov 13, 2012 at 10:44 AM, Cory Quammen  wrote:
 Just a followup:

 My plugins build and link against ParaView 3.98-RC1 without error, so
 a regression has been introduced since then.

 Cory

 On Tue, Nov 13, 2012 at 9:50 AM, Cory Quammen  wrote:
> Takuya,
>
> I have a similar problem with a simple VTK filter plugin and a
> representation plugin. Unfortunately, I don't have a better solution
> than what you propose, but I just wanted to confirm that this is a new
> problem, at least on Mac OS X.
>
> Cory
>>>
>>> The quick work-around is to link your plugin against
>>> vtkRenderingMatplotlib when python is enabled. We do this for part of
>>> the CoProcessing plugin that comes with ParaView. This is not a good
>>> long term solution IMO, but hopefully someone with a better knowledge
>>> of the modular build system can propose a better solution...
>>
>> A better solution was pointed out to me off-list -- try adding
>>
>> include(${PARAVIEW_USE_FILE})
>>
>> and then linking against ${VTK_LIBRARIES}. This should be better in
>> the long-term.
>>
>> Dave
>> ___
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at 
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at: 
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview



-- 
Cory Quammen
Research Associate
Department of Computer Science
The University of North Carolina at Chapel Hill
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 3.98.0, Release Candidate 1 now available for download

[Utkarsh Ayachit]

We are a little closer :), but not all the way there yet. There are 
placeholders in the top level CMakeLists.txt that make it possible to use 
system VTK. But when I was writing that code VTK was not yet ready to allow 
building of external modules. Things have charged since and we can get back to 
giving that a try, but that'll be after 3.98 is out. 

Utkarsh 



On Nov 12, 2012, at 10:27 PM, Orion Poplawski  wrote:

> On 11/07/2012 12:40 PM, Utkarsh Ayachit wrote:
>> Folks,
>> 
>> In preparation of the next ParaView release, the ParaView 3.98.0, RC1 is
>> now available for download
>> (http://paraview.org/paraview/resources/software.php).
> 
> I don't suppose we are any closer to being able to compile paraview against a 
> separately compiled VTK?
> 
> 
> -- 
> Orion Poplawski
> Technical Manager 303-415-9701 x222
> NWRA/CoRA DivisionFAX: 303-415-9702
> 3380 Mitchell Lane  or...@cora.nwra.com
> Boulder, CO 80301  http://www.cora.nwra.com
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Using VR-Style input devices

[Christian Richter]

Hi Aashish,

I'm very interested in getting this to work, please point me to the 
right place in the code.


Do you know why the Paraview-own VTK does not support Tdx and does not 
use it ? (the option is there in the cmake but than something is 
missing, because it does not ask for VTK_TDX_INCLUDE_PATH and that's why 
I think compilation breaks)

http://www.vtk.org/Wiki/VTK/3DConnexion_Devices_Support

I was able to get the TDx TestApp to work with an extern build of VTK 
and hoped it would be straightforward to use ist in Paraview -- but i 
gave up at this point.


Thank you,
Christian

Am 12.11.2012 18:25, schrieb Aashish Chaudhary:

Hi Christian,

I've found out that the device acts as an analog-input (seen with
vrpn_print_devices).

Could you please tell me how to write a style to use the
analog-input (6DOF) to manipulate the camera view ?


Sorry for the late reply. We have been busy with the SuperComputing 
demo. Its really simple, you get the input from the analog devices (it 
may not be normalized), and then you calculate the delta from the last 
time you got any event and use this delta however you would like. 
Basically the math to rotate the camera is dependent on what camera 
type you would like to have. As far as getting access to camera and 
setting up the camera positions, I can point you to the code for that.


Please let me know.



___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: Still cannot add to selection with Crtl key

[Zenker, Dr. Matthias]

Bug 0013056, exists since 3.14. I am not sure if it worked with 3.12.0, but it 
definitively works with 3.12.0-RC2, which I am still using for this very reason.

Thanks,

Matthias

Von: Scott, W Alan [mailto:wasc...@sandia.gov]
Gesendet: Dienstag, 13. November 2012 18:06
An: Utkarsh Ayachit; Zenker, Dr. Matthias
Cc: paraview@paraview.org
Betreff: RE: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl 
key

Utkarsh,
I tried this on Linux, and it works fine.
I tried this windows (master pull from about last Friday, November 10), and it 
does not work.  Not sure if it is related, but my debug build outputs the 
following warning:

Generic Warning: In 
..\..\..\..\..\src\ParaView3\ParaViewCore\ServerManager\Core\vtkSMPropertyHelper.cxx,
 line 408
Call not supported for the current property type.

Matthias, if you have not already, please write this up as a bug.

Alan

From: paraview-boun...@paraview.org 
[mailto:paraview-boun...@paraview.org] On Behalf Of Utkarsh Ayachit
Sent: Monday, November 12, 2012 5:04 PM
To: Zenker, Dr. Matthias
Cc: paraview@paraview.org
Subject: [EXTERNAL] Re: [Paraview] Still cannot add to selection with Crtl key

This seems to work for me on Linux and Mac (the only platforms I could test on 
as I am travelling). Have you tried these on anything other than Windows? I 
wonder if it's a Windows only problem. I will test on Windows once I get back 
later this week.

Utkarsh

On Thu, Nov 8, 2012 at 3:24 AM, Zenker, Dr. Matthias 
mailto:matthias.zen...@erbe-med.com>> wrote:
Hi,

in the new binary (3.98.0-RC1, Windows 32 bit), I still cannot add points to 
the current selection by holding the ctrl key (bug 0013056). Is there a 
workaround or fix in sight? I use this feature frequently, so I will have to 
stick with 3.12.0-RC2 until this is fixed (it doesn't work in 3.14 either).

Matthias



_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview



_
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: Plot probe value over time

[Zenker, Dr. Matthias]

Hi,

I have downloaded can.ex2, and still don't get the selection to work.

Procedure (3.12.0-RC2, Windows XP 32 bit):
1. Open dataset
2. Apply
3. Filters-> Probe Location
4. Move mouse to point, hit "p"
5. Apply
6. Click on "Select Points On"
7. Click on point
8. Filters->Plot Selection over Time
9. Apply

Result: an empty plot appears.

Can anyone confirm this, or tell me what I am doing wrong?

Thanks,

Matthias


> -Ursprüngliche Nachricht-
> Von: Scott, W Alan [mailto:wasc...@sandia.gov]
> Gesendet: Dienstag, 13. November 2012 17:31
> An: Zenker, Dr. Matthias; DeMarle, David Edward (External Contacts)
> Cc: paraview@paraview.org
> Betreff: RE: [EXTERNAL] Re: [Paraview] Plot probe value over time
>
> can.ex2 (also often renamed can.exo) and disk_out_ref.ex2 (also often
> renamed disk_out_ref.exo) are two workhorse, very small datasets that are
> in the ParaView data download.  Go to the ParaView web site, Resources/
> Downloads/ Type of Download/ Data, Documents and Tutorials.
>
> can.ex2 has two blocks, and time data.
> disk_out_ref.ex2 includes temperature, pressure and a vector field.
>
> Alan
>
> -Original Message-
> From: paraview-boun...@paraview.org [mailto:paraview-
> boun...@paraview.org] On Behalf Of Zenker, Dr. Matthias
> Sent: Tuesday, November 13, 2012 6:46 AM
> To: DeMarle, David Edward (External Contacts)
> Cc: paraview@paraview.org
> Subject: [EXTERNAL] Re: [Paraview] Plot probe value over time
>
> Hmmm...
> Can anybody on the list confirm that this works under Windows?
> If it doesn't, could this be a bug?
> Is the can.ex2 dataset available somewhere so that I can exclude that the
> fault is in my dataset?
>
> Matthias
>
>
> > -Ursprüngliche Nachricht-
> > Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> > Gesendet: Dienstag, 13. November 2012 14:35
> > An: Zenker, Dr. Matthias
> > Cc: Utkarsh Ayachit; paraview@paraview.org
> > Betreff: Re: [Paraview] Plot probe value over time
> >
> > I don't know. Works for me using the can.ex2 data set with 3.12 or
> > 3.98 binaries on mac.
> >
> > David E DeMarle
> > Kitware, Inc.
> > R&D Engineer
> > 21 Corporate Drive
> > Clifton Park, NY 12065-8662
> > Phone: 518-881-4909
> >
> >
> > On Tue, Nov 13, 2012 at 8:28 AM, Zenker, Dr. Matthias
> >  wrote:
> > > Hi,
> > >
> > > I can't get it to work.
> > > I have specified a point with "Probe Location", clicked on "Select
> > > Points
> > On", and selected the cross generated by "Probe Location". But "Plot
> > Selection Over Time" gives an empty plot. "Extract Selection" doesn't
> > help either. Obviously I am missing something, but what?
> > >
> > > Thank you,
> > >
> > > Matthias
> > >
> > > P.S.: I have tried with both 3.12.0-RC2 and 3.98.0-RC1 under Windows
> > > XP
> > (32bit).
> > >
> > >> -Ursprüngliche Nachricht-
> > >> Von: David E DeMarle [mailto:dave.dema...@kitware.com]
> > >> Gesendet: Dienstag, 13. November 2012 13:55
> > >> An: Zenker, Dr. Matthias
> > >> Cc: Utkarsh Ayachit; paraview@paraview.org
> > >> Betreff: Re: [Paraview] Plot probe value over time
> > >>
> > >> The simplest way to do what you want is to use the "Probe Location"
> > >> filter to specify the point in space you want to sample values
> > >> onto, then use "Select Points On" to make a selection of that
> > >> filter's output. Finally apply "Plot Selection over Time".
> > >>
> > >> David E DeMarle
> > >> Kitware, Inc.
> > >> R&D Engineer
> > >> 21 Corporate Drive
> > >> Clifton Park, NY 12065-8662
> > >> Phone: 518-881-4909
> > >>
> > >>
> > >> On Tue, Nov 13, 2012 at 3:14 AM, Zenker, Dr. Matthias
> > >>  wrote:
> > >> > Hi Utkarsh,
> > >> >
> > >> >
> > >> >
> > >> > I'm afraid I don't understand what you mean. The string "select
> > >> > points" does not figure in the User's Guide. AFAIK I can select a
> > >> > point only if it is a node. But I would like to probe the
> > >> > temperature at a point which is located between nodes, so I need
> > >> > to
> > interpolate.
> > >> > The interpolated temperature should be plotted over time.
> > >> >
> > >> > So my question: How do I do that?
> > >> >
> > >> >
> > >> >
> > >> > Thank you for a further explanation,
> > >> >
> > >> >
> > >> >
> > >> > Matthias
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Von: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com]
> > >> > Gesendet: Dienstag, 13. November 2012 00:47
> > >> > An: Zenker, Dr. Matthias
> > >> > Cc: paraview@paraview.org
> > >> > Betreff: Re: [Paraview] Plot probe value over time
> > >> >
> > >> >
> > >> >
> > >> > Matthias,
> > >> >
> > >> >
> > >> >
> > >> > Couldn't you create a "point" selection (either 'Select Points On'
> > >> > or 'Select Points Through') for the probed point itself and then
> > >> > do "Extract Selection Over Time"?
> > >> >
> > >> >
> > >> >
> > >> > Utkarsh
> > >> >
> > >> >
> > >> >
> > >> > On Mon, Nov 12, 2012 at 2:36 AM, Zenker, Dr. Matthias
> > >> >  wrote:
> > >> >
> > >> > Hi,
> > >> >
> > >> >
> > >> >
> > >> > I wou