Re: [Paraview] ParaView 5.4.0 Release Candidate 2 binaries are available for download

[Gena Bug via ParaView]

404 File not found!
/projects/FTP/pub/paraview/v5.4/ParaView-5.4.0-RC2-Qt5-OpenGL2-MPI-Linux-64bit.tar.gz

On 16.05.2017 23:14, Cory Quammen wrote:

On behalf of the ParaView development community, I am pleased to
announce that binaries and source code for ParaView 5.4.0-RC2 are
available to download from

http://www.paraview.org/download/

There was a slight problem building the Linux binary and the
AcuSolveReaderPlugin, so those are not yet available, but they will be
uploaded as soon as possible. I will reply to this email when they are
available for download.

Please let us know if you run into any problems with this release candidate.

Thank you,
Cory


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: ParaView 5.3.0 Release Candidate 1 binaries are available for download

[Gena Bug via ParaView]

I tried 37-ge566e81 and with it saving animations (and screenshots of 
LineChartView) works. Thanks!


On 03/01/17 20:25, Scott, W Alan wrote:

Yes.

Alan


-Original Message-
From: Gena Bug [mailto:archaero...@mail.ru]
Sent: Wednesday, March 1, 2017 1:23 AM
To: Scott, W Alan ; Utkarsh Ayachit
; Mathieu Westphal

Cc: ParaView 
Subject: Re: [EXTERNAL] Re: [Paraview] ParaView 5.3.0 Release Candidate 1
binaries are available for download

Scott,

Is fix available in the last nightly build?

On 02/28/17 21:41, Scott, W Alan wrote:

Gena,
I just tried saving animations, Linux, local server, using master from

yesterday.  This includes a fix for
https://gitlab.kitware.com/paraview/paraview/issues/17222 that is not in
RC2.  I was able to successfully create an .avi file with can.exo in one view 
and
plot over line (line chart view) in a second view.  If master is still showing 
save
animation bugs, please let Kitware know.


Thanks,

Alan

From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of
Utkarsh Ayachit
Sent: Tuesday, February 28, 2017 7:57 AM
To: Gena Bug ; Mathieu Westphal

Cc: ParaView 
Subject: [EXTERNAL] Re: [Paraview] ParaView 5.3.0 Release Candidate 1
binaries are available for download

Mathieu,

Do you want to take this one on? I suspect the patch needs some more

tweaking.


Utkarsh

On Tue, Feb 28, 2017 at 7:53 AM, Gena Bug

mailto:archaero...@mail.ru>> wrote:

Hi, Utkarsh

I've tried your patch and now it's possible to set real numbers for axis range

(Line Chart View). Also, Set Range dialog is now working (both Rescale
buttons are work). However, in Calculator filter dot and comma are treated
differently for real numbers in scientific notation: exponent is ignored when
using dot.


Also, I noticed another issue -- saving animation with two views (one, for

example, with 2D/3D distribution and one with 1D) is not working anymore!
In final movie I see two views but both with the same distribution.



On 26.02.2017 20:07, Utkarsh Ayachit wrote:
Gena,

Can you please try if the attached patch fixes the issue?

Thanks
Utkarsh

On Fri, Feb 24, 2017 at 5:27 AM, Gena Bug

mailto:archaero...@mail.ru>> wrote:

Hi, Utkarsh

I've just tried RC2 and saw that plots looks much better, thanks!

I also noticed another issues:
dot and comma:
https://gitlab.kitware.com/paraview/paraview/issues/17225
rescale: https://gitlab.kitware.com/paraview/paraview/issues/17226

However, they both concern my regional settings (ru). After switching
to C they are gone.


Debian testing amd64, kf5, plasma5


On 20.02.2017 23:48, Utkarsh Ayachit wrote:

Gena,

I can certainly reproduce this issue. Let me see what's going on. I've
reported the issue here:
https://gitlab.kitware.com/paraview/paraview/issues/17202

On Sat, Feb 18, 2017 at 10:02 AM, Gena Bug via ParaView
mailto:paraview@paraview.org>> wrote:

Hi,

I noticed a difference in the plot rendering (Line Chart View) -- in
the
5.3RC1 lines aren't smooth as it were in 5.2.

Another difference is that in 5.3RC1 you can't set real numbers in the
axis custom range fields using . (dot), only with , (comma).

Debian testing amd64, nvidia, fxaa disabled.


On 13.02.2017 19:49, Cory Quammen wrote:


Folks,

Binaries and source code zip files and tar balls for ParaView 5.3.0
Release Candidate 1 are now available for download from

http://www.paraview.org/download/

Please let us know if you run into any problems with this release
candidate.

Sincerely,
Cory

___
Powered by www.kitware.com<http://www.kitware.com>

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview




___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] [EXTERNAL] Re: ParaView 5.3.0 Release Candidate 1 binaries are available for download

[Gena Bug via ParaView]

Scott,

Is fix available in the last nightly build?

On 02/28/17 21:41, Scott, W Alan wrote:

Gena,
I just tried saving animations, Linux, local server, using master from 
yesterday.  This includes a fix for 
https://gitlab.kitware.com/paraview/paraview/issues/17222 that is not in RC2.  
I was able to successfully create an .avi file with can.exo in one view and 
plot over line (line chart view) in a second view.  If master is still showing 
save animation bugs, please let Kitware know.

Thanks,

Alan

From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Utkarsh 
Ayachit
Sent: Tuesday, February 28, 2017 7:57 AM
To: Gena Bug ; Mathieu Westphal 

Cc: ParaView 
Subject: [EXTERNAL] Re: [Paraview] ParaView 5.3.0 Release Candidate 1 binaries 
are available for download

Mathieu,

Do you want to take this one on? I suspect the patch needs some more tweaking.

Utkarsh

On Tue, Feb 28, 2017 at 7:53 AM, Gena Bug 
mailto:archaero...@mail.ru>> wrote:
Hi, Utkarsh

I've tried your patch and now it's possible to set real numbers for axis range 
(Line Chart View). Also, Set Range dialog is now working (both Rescale buttons 
are work). However, in Calculator filter dot and comma are treated differently 
for real numbers in scientific notation: exponent is ignored when using dot.

Also, I noticed another issue -- saving animation with two views (one, for 
example, with 2D/3D distribution and one with 1D) is not working anymore! In 
final movie I see two views but both with the same distribution.


On 26.02.2017 20:07, Utkarsh Ayachit wrote:
Gena,

Can you please try if the attached patch fixes the issue?

Thanks
Utkarsh

On Fri, Feb 24, 2017 at 5:27 AM, Gena Bug 
mailto:archaero...@mail.ru>> wrote:
Hi, Utkarsh

I've just tried RC2 and saw that plots looks much better, thanks!

I also noticed another issues:
dot and comma: https://gitlab.kitware.com/paraview/paraview/issues/17225
rescale: https://gitlab.kitware.com/paraview/paraview/issues/17226

However, they both concern my regional settings (ru). After switching to C
they are gone.


Debian testing amd64, kf5, plasma5


On 20.02.2017 23:48, Utkarsh Ayachit wrote:

Gena,

I can certainly reproduce this issue. Let me see what's going on. I've
reported the issue here:
https://gitlab.kitware.com/paraview/paraview/issues/17202

On Sat, Feb 18, 2017 at 10:02 AM, Gena Bug via ParaView
mailto:paraview@paraview.org>> wrote:

Hi,

I noticed a difference in the plot rendering (Line Chart View) -- in the
5.3RC1 lines aren't smooth as it were in 5.2.

Another difference is that in 5.3RC1 you can't set real numbers in the
axis
custom range fields using . (dot), only with , (comma).

Debian testing amd64, nvidia, fxaa disabled.


On 13.02.2017 19:49, Cory Quammen wrote:


Folks,

Binaries and source code zip files and tar balls for ParaView 5.3.0
Release Candidate 1 are now available for download from

http://www.paraview.org/download/

Please let us know if you run into any problems with this release
candidate.

Sincerely,
Cory

___
Powered by www.kitware.com<http://www.kitware.com>

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview




___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.3.0 Release Candidate 1 binaries are available for download

[Gena Bug via ParaView]

Hi, Utkarsh

I've tried your patch and now it's possible to set real numbers for axis 
range (Line Chart View). Also, Set Range dialog is now working (both 
Rescale buttons are work). However, in Calculator filter dot and comma 
are treated differently for real numbers in scientific notation: 
exponent is ignored when using dot.


Also, I noticed another issue -- saving animation with two views (one, 
for example, with 2D/3D distribution and one with 1D) is not working 
anymore! In final movie I see two views but both with the same distribution.


On 26.02.2017 20:07, Utkarsh Ayachit wrote:

Gena,

Can you please try if the attached patch fixes the issue?

Thanks
Utkarsh

On Fri, Feb 24, 2017 at 5:27 AM, Gena Bug  wrote:

Hi, Utkarsh

I've just tried RC2 and saw that plots looks much better, thanks!

I also noticed another issues:
dot and comma: https://gitlab.kitware.com/paraview/paraview/issues/17225
rescale: https://gitlab.kitware.com/paraview/paraview/issues/17226

However, they both concern my regional settings (ru). After switching to C
they are gone.


Debian testing amd64, kf5, plasma5


On 20.02.2017 23:48, Utkarsh Ayachit wrote:


Gena,

I can certainly reproduce this issue. Let me see what's going on. I've
reported the issue here:
https://gitlab.kitware.com/paraview/paraview/issues/17202

On Sat, Feb 18, 2017 at 10:02 AM, Gena Bug via ParaView
 wrote:


Hi,

I noticed a difference in the plot rendering (Line Chart View) -- in the
5.3RC1 lines aren't smooth as it were in 5.2.

Another difference is that in 5.3RC1 you can't set real numbers in the
axis
custom range fields using . (dot), only with , (comma).

Debian testing amd64, nvidia, fxaa disabled.


On 13.02.2017 19:49, Cory Quammen wrote:



Folks,

Binaries and source code zip files and tar balls for ParaView 5.3.0
Release Candidate 1 are now available for download from

http://www.paraview.org/download/

Please let us know if you run into any problems with this release
candidate.

Sincerely,
Cory



___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview






___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.3.0 Release Candidate 1 binaries are available for download

[Gena Bug via ParaView]

On 02/26/17 20:07, Utkarsh Ayachit wrote:

Gena,

Can you please try if the attached patch fixes the issue?

Yep! But it'll be only tomorrow..



Thanks
Utkarsh

On Fri, Feb 24, 2017 at 5:27 AM, Gena Bug  wrote:

Hi, Utkarsh

I've just tried RC2 and saw that plots looks much better, thanks!

I also noticed another issues:
dot and comma: https://gitlab.kitware.com/paraview/paraview/issues/17225
rescale: https://gitlab.kitware.com/paraview/paraview/issues/17226

However, they both concern my regional settings (ru). After switching to C
they are gone.


Debian testing amd64, kf5, plasma5


On 20.02.2017 23:48, Utkarsh Ayachit wrote:


Gena,

I can certainly reproduce this issue. Let me see what's going on. I've
reported the issue here:
https://gitlab.kitware.com/paraview/paraview/issues/17202

On Sat, Feb 18, 2017 at 10:02 AM, Gena Bug via ParaView
 wrote:


Hi,

I noticed a difference in the plot rendering (Line Chart View) -- in the
5.3RC1 lines aren't smooth as it were in 5.2.

Another difference is that in 5.3RC1 you can't set real numbers in the
axis
custom range fields using . (dot), only with , (comma).

Debian testing amd64, nvidia, fxaa disabled.


On 13.02.2017 19:49, Cory Quammen wrote:



Folks,

Binaries and source code zip files and tar balls for ParaView 5.3.0
Release Candidate 1 are now available for download from

http://www.paraview.org/download/

Please let us know if you run into any problems with this release
candidate.

Sincerely,
Cory



___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview








locale.patch


diff --git a/CMake/branded_paraview_main.cxx.in 
b/CMake/branded_paraview_main.cxx.in
index 9af8446..b965f19 100644
--- a/CMake/branded_paraview_main.cxx.in
+++ b/CMake/branded_paraview_main.cxx.in
@@ -38,6 +38,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 #include 
 #include 
+#include 

 #include "pq@BPC_NAME@Initializer.h"
 #include "vtkPVConfig.h"
@@ -104,10 +105,8 @@ int main(int argc, char* argv[])
 #endif
 #endif

-  // We force LC_NUMERIC to C - it is important as Qt sets locale to the user's
-  // environment locale value and this might break some basic features like
-  // the calls to atof() that are locale dependent.
-  vtksys::SystemTools::PutEnv("LC_NUMERIC=C");
+  std::setlocale(LC_NUMERIC, LC_CTYPE);
+  QLocale::setDefault(QLocale::c());

   QApplication qtapp(argc, argv);



___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.3.0 Release Candidate 1 binaries are available for download

[Gena Bug via ParaView]

Hi, Utkarsh

I've just tried RC2 and saw that plots looks much better, thanks!

I also noticed another issues:
dot and comma: https://gitlab.kitware.com/paraview/paraview/issues/17225
rescale: https://gitlab.kitware.com/paraview/paraview/issues/17226

However, they both concern my regional settings (ru). After switching to 
C they are gone.



Debian testing amd64, kf5, plasma5

On 20.02.2017 23:48, Utkarsh Ayachit wrote:

Gena,

I can certainly reproduce this issue. Let me see what's going on. I've
reported the issue here:
https://gitlab.kitware.com/paraview/paraview/issues/17202

On Sat, Feb 18, 2017 at 10:02 AM, Gena Bug via ParaView
 wrote:

Hi,

I noticed a difference in the plot rendering (Line Chart View) -- in the
5.3RC1 lines aren't smooth as it were in 5.2.

Another difference is that in 5.3RC1 you can't set real numbers in the axis
custom range fields using . (dot), only with , (comma).

Debian testing amd64, nvidia, fxaa disabled.


On 13.02.2017 19:49, Cory Quammen wrote:


Folks,

Binaries and source code zip files and tar balls for ParaView 5.3.0
Release Candidate 1 are now available for download from

http://www.paraview.org/download/

Please let us know if you run into any problems with this release
candidate.

Sincerely,
Cory



___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview




___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.2 Release Candidate 2 available for download

[Gena Bug via ParaView]

Hi!

Now, with RC2, fontconfig warns me about blank section:

Fontconfig warning: line 160: blank doesn't take any effect anymore. 
please remove it from your fonts.conf


However, that all -- no more new folder "fontconfig" in the running 
directory. Thank you, that was really annoying!


Also, lib-dynload is still missing in the lib/python2.7

On 19.10.2016 21:42, Cory Quammen wrote:

On behalf of the ParaView development team, I am happy to announce that
ParaView 5.2 Release Candidate 2 binaries and source tarballs are now
available for download at

http://www.paraview.org/download/

Please let us know if you encounter any problems with this release
 candidate.

Thanks,
Cory



___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

On 17.10.2016 17:28, Ben Boeckel wrote:

On Mon, Oct 17, 2016 at 14:31:56 +0300, Gena Bug via ParaView wrote:

The next message appears when running pvpython in a console:

Could not find platform dependent libraries 
Consider setting $PYTHONHOME to [:]

Then prompt appears and everything works as expected.


This appears because we sort of hack up the Python installation which
Python doesn't like. It appears that just creating the
lib/python2.7/lib-dynload directory should suppress this warning. Can
you confirm before I respin a whole binary for it (the warning isn't
showing up at all on my machine)?

Yep, this helped! Thank you, Ben.


--Ben


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

Hi!

The next message appears when running pvpython in a console:

Could not find platform dependent libraries 
Consider setting $PYTHONHOME to [:]

Then prompt appears and everything works as expected.


On 11.10.2016 16:50, Cory Quammen wrote:

On behalf of the ParaView development team, I am pleased to announce
that ParaView 5.2 Release Candidate 1 binaries and source tarballs are
now available for download at

http://www.paraview.org/download/

Please let us know if you encounter any problems with this release candidate.

Thanks,
Cory


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] [Paraview-developers] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

Thank you for the clarification, David.

On 13.10.2016 20:20, David Lonie wrote:

On Thu, Oct 13, 2016 at 7:18 AM, Gena Bug via ParaView <
paraview@paraview.org> wrote:


On 11.10.2016 18:15, Utkarsh Ayachit wrote:


Folks,

Among several new features, this release includes anti-aliasing
support [1]. Currently, it's off by default. I'd encourage all testers
and early adopters to turn it on and report any issues you notice. If
we don't hear of any major obstacles, we would anti-aliasing on my
default in the final release (or subsequent RCs)


I attached two screenshots of a simple 2d cartesian mesh, one with
anti-aliasing enabled and one without it. For me the one with AA looks
strange -- cells look like circles not squares. Is it expected behavior?



Unfortunately it is. FXAA is an approximate anti-aliasing solution that's
applied as a post-processing pass over the rendered scene -- since ParaView
often does distributed rendering, this is really the only way we can
reliably get anti-aliasing without introducing major artifacts at processor
boundaries.

Because it's only working with the rendered pixel data (instead of actual
geometric primitives), there are some occasional issues like this one. In
this case, it's detecting the intersections as aliased edges and attempting
to smooth them out, fattening the line near the intersection as a result.

HTH,
Dave


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] [Paraview-developers] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

On 11.10.2016 18:15, Utkarsh Ayachit wrote:

Folks,

Among several new features, this release includes anti-aliasing
support [1]. Currently, it's off by default. I'd encourage all testers
and early adopters to turn it on and report any issues you notice. If
we don't hear of any major obstacles, we would anti-aliasing on my
default in the final release (or subsequent RCs)
I attached two screenshots of a simple 2d cartesian mesh, one with 
anti-aliasing enabled and one without it. For me the one with AA looks 
strange -- cells look like circles not squares. Is it expected behavior?




Utkarsh

[1] https://blog.kitware.com/new-fxaa-anti-aliasing-option-in-paraviewvtk/


On Tue, Oct 11, 2016 at 9:50 AM, Cory Quammen  wrote:

On behalf of the ParaView development team, I am pleased to announce
that ParaView 5.2 Release Candidate 1 binaries and source tarballs are
now available for download at

http://www.paraview.org/download/

Please let us know if you encounter any problems with this release candidate.

Thanks,
Cory

--
Cory Quammen
Staff R&D Engineer
Kitware, Inc.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Search the list archives at: http://markmail.org/search/?q=Paraview-developers

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview-developers

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

On 13.10.2016 15:21, Ben Boeckel wrote:

On Thu, Oct 13, 2016 at 13:57:58 +0300, Gena Bug via ParaView wrote:

I'm slightly confused with background color for the screenshots when
trying to override palette. If I set Background to a Single color in the
Properties tab (gray by default) then nothing can change it --
background will always be gray on the screenshots. If I set Gradient for
the Background then:
1. current palette: works as expected
2. black bg: works
3. default bg: don't know what's default but it looks like 1... OK
4. gradient bg: like 1.
5. gray bg: like 1.
6. print bg: it looks like Color 1 is set to white in Background settings
7. white bg: same as 6.

So now there is no way to set white background for the screenshots
(previously it was possible when Single Color background was used but
not Gradient).


Not sure if you're aware, but there is also the option to write out a
screenshot where the background is transparent using an alpha channel.
It also takes into account translucent geometry. It's under the Advanced
settings in the General tab in Settings (search will also find it).
Great! I didn't know, thank you! I've been expecting this feature for a 
looong time! Now my life will be better:)




--Ben


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

Hi again!

I'm slightly confused with background color for the screenshots when 
trying to override palette. If I set Background to a Single color in the 
Properties tab (gray by default) then nothing can change it -- 
background will always be gray on the screenshots. If I set Gradient for 
the Background then:

1. current palette: works as expected
2. black bg: works
3. default bg: don't know what's default but it looks like 1... OK
4. gradient bg: like 1.
5. gray bg: like 1.
6. print bg: it looks like Color 1 is set to white in Background settings
7. white bg: same as 6.

So now there is no way to set white background for the screenshots 
(previously it was possible when Single Color background was used but 
not Gradient).


On 11.10.2016 16:50, Cory Quammen wrote:

On behalf of the ParaView development team, I am pleased to announce
that ParaView 5.2 Release Candidate 1 binaries and source tarballs are
now available for download at

http://www.paraview.org/download/

Please let us know if you encounter any problems with this release candidate.

Thanks,
Cory


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ParaView 5.2 Release Candidate 1 available for download

[Gena Bug via ParaView]

Hi!

I've just tried the 5.2rc and noticed this in the console:

$ Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 
72: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 
72: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 
80: saw unknown, expected number


And a fontconfig folder is created in the run directory with a bunch of 
cache-files.


$ cat /etc/fonts/conf.d/10-scale-bitmap-fonts.conf:
...
64  
65
66  matrix
67  
68pixelsizefixupfactor
690.0
700.0
71pixelsizefixupfactor
72   
73
74  
75  
76
77  size
78  pixelsizefixupfactor
79
80  
81 
   ...

OS: Debian testing amd64

Not sure this is the problem of PV but it's not happening with 5.1.2 
version.


On 11.10.2016 16:50, Cory Quammen wrote:

On behalf of the ParaView development team, I am pleased to announce
that ParaView 5.2 Release Candidate 1 binaries and source tarballs are
now available for download at

http://www.paraview.org/download/

Please let us know if you encounter any problems with this release candidate.

Thanks,
Cory


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 5.1.0-RC1 available for download

[Gena Bug via ParaView]

On 10.06.2016 18:21, Utkarsh Ayachit wrote:

New binaries for linux have been uploaded. Please give them a go.

Now it seems to work... At least it starts and I can do basic stuff.

Thanks, Utkarsh!


Thanks
Utkarsh

On Thu, Jun 9, 2016 at 7:10 PM, Utkarsh Ayachit
 wrote:

Roger that. I've getting a new build. I switched to using a new build
machine -- looks like that was premature. I'll upload binaries from
the old build machine once they are available.



On Thu, Jun 9, 2016 at 3:31 PM, Gena Bug via ParaView
 wrote:

Hi!

Can't run anything from bin:

$ ./paraview
ParaView-5.1.0-RC1-Qt4-OpenGL2-MPI-Linux-64bit/lib/paraview-5.1/paraview:
error while loading shared libraries: libmpich.so.3: cannot open shared
object file: No such file or directory

I have libmpich.so in the system (Debian testing), so I symlinked to it, but
it didn't help -- after a series of new symlinks:
1. libmpich.so.3 -> libmpich.so
2. libopa.so.1 -> libopa.so
3. libmpl.so.1 -> libmpl.so
4. ??? -> libembree.so.2

I stopped at last step because can't find any package with libembree...



On 09.06.2016 19:27, Zhixuan Cao wrote:


Very happy to hear that. Is there any documentation about the detail of
new features? For example, what is the exact equation for the new feature
SPH interpolation?


On Jun 9, 2016, at 10:59 AM, Utkarsh Ayachit
 wrote:

Folks,

ParaView 5.1.0-RC1 is now available for download [1]. For fixes that
went into this release, refer to the change log on bug tracker [2].

Detailed release notes coming soon.

- The ParaView team

[1] http://www.paraview.org/download/
[2] http://www.paraview.org/Bug/changelog_page.php
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview



___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview



___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 5.1.0-RC1 available for download

[Gena Bug via ParaView]

Hi!

Can't run anything from bin:

$ ./paraview
ParaView-5.1.0-RC1-Qt4-OpenGL2-MPI-Linux-64bit/lib/paraview-5.1/paraview: 
error while loading shared libraries: libmpich.so.3: cannot open shared 
object file: No such file or directory


I have libmpich.so in the system (Debian testing), so I symlinked to it, 
but it didn't help -- after a series of new symlinks:

1. libmpich.so.3 -> libmpich.so
2. libopa.so.1 -> libopa.so
3. libmpl.so.1 -> libmpl.so
4. ??? -> libembree.so.2

I stopped at last step because can't find any package with libembree...


On 09.06.2016 19:27, Zhixuan Cao wrote:

Very happy to hear that. Is there any documentation about the detail of new 
features? For example, what is the exact equation for the new feature SPH 
interpolation?

On Jun 9, 2016, at 10:59 AM, Utkarsh Ayachit  
wrote:

Folks,

ParaView 5.1.0-RC1 is now available for download [1]. For fixes that
went into this release, refer to the change log on bug tracker [2].

Detailed release notes coming soon.

- The ParaView team

[1] http://www.paraview.org/download/
[2] http://www.paraview.org/Bug/changelog_page.php
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] pv freezes when merging blocks of angular periodic filter data

[Gena Bug]

On 02.05.2016 10:41, Mathieu Westphal wrote:

This bug has already been corrected in the master branch of paraview. You
can clone it and compile it, or wait for ParaView 5.0.1 to come out in a
few weeks.
I checked the last nightly and it works. Great! Thanks for the info, 
Mathieu!




Regards,

Mathieu Westphal

On Sat, Apr 30, 2016 at 12:04 PM, Mathieu Westphal <
mathieu.westp...@kitware.com> wrote:


I will take a look at it next week.

Regards,

Mathieu Westphal

On Sat, Apr 30, 2016 at 11:03 AM, Gena Bug  wrote:


UPD: Seems it somehow related to cell-data vector arrays, because it
works with point-data arrays.

I attached a smallest example I came up with that could help. If you load
the state-file you'll see the next pipeline:
test.vtp
AngularPeriodicFilter (with angle = 90 and axiz = Z)
CellDatatoPointData
MergeBlocks

That works. However if you remove CellDatatoPointData from this pipeline
and try to merge the result of AngularPeriodicFilter you'll see the problem.


On 30.04.2016 11:39, Gena Bug wrote:


Hi!

I was able to freeze Paraview by applying MergeBlocks filter to the data
generated by AngularPeriodicFilter. In console I see a bunch of warnings:
{
Warning: In

/home/kitware/dashboards/buildbot/paraview-debian6dash-linux-shared-release_opengl2_qt4_superbuild/build/paraview/src/paraview/VTK/Common/Core/vtkMappedDataArray.txx,
line 47
20vtkPeriodicDataArrayIdE (0x6dce310): GetVoidPointer called. This is
very expensive for vtkMappedDataArray subclasses, since the scalar array
must be generated for each call. Consider using a
vtkTypedDataArrayIterator instead.
}

Env: debian testing amd64, KF5, pv downloaded from the site.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview



___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview







___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

[Paraview] pv freezes when merging blocks of angular periodic filter data

[Gena Bug]

Hi!

I was able to freeze Paraview by applying MergeBlocks filter to the data 
generated by AngularPeriodicFilter. In console I see a bunch of warnings:

{
Warning: In 
/home/kitware/dashboards/buildbot/paraview-debian6dash-linux-shared-release_opengl2_qt4_superbuild/build/paraview/src/paraview/VTK/Common/Core/vtkMappedDataArray.txx, 
line 47
20vtkPeriodicDataArrayIdE (0x6dce310): GetVoidPointer called. This is 
very expensive for vtkMappedDataArray subclasses, since the scalar array 
must be generated for each call. Consider using a 
vtkTypedDataArrayIterator instead.

}

Env: debian testing amd64, KF5, pv downloaded from the site.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

[Paraview] req: please exclude userguide from binary installers

[Gena Bug]

Hi!

Paraview is developed fast and all new features are great! That's why I 
download all new releases including RC. However, installation binaries 
are huge because they include UserGuide in pdf. Excluding it decreases 
archive size from 379 Mb to 204 Mb (almost twice!) I know, most of you 
have high-speed Internet and you don't see the difference, however I'm 
not so lucky... It'll be great for me if developers exclude userguide 
from the installation binaries.


P.S. Userguide included in "Data, Documentation, and Tutorials" type of 
download, so there is also a kind of duplication.

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] can't cmake pv5

[Gena Bug]

Hi, Chuck!

Thank you for the response, unfortunately it doesn't help:
1. during the cmake step now I see a lot of messages:
{{{
-- Could NOT find MPI_C (missing: MPI_C_LIBRARIES)
-- Could NOT find MPI_CXX (missing: MPI_CXX_LIBRARIES)
-- Could NOT find MPI_Fortran (missing: MPI_Fortran_LIBRARIES)
}}}
2. however, I see "Configuring done" message at the end and
3. then a lot of dev-messages like this one:
{{{
This warning is for project developers. Use -Wno-dev to suppress it.

CMake Warning (dev) in Plugins/SciberQuestToolKit/CMakeLists.txt:
Policy CMP0021 is not set: Fatal error on relative paths in
INCLUDE_DIRECTORIES target property. Run "cmake --help-policy CMP0021" for
policy details. Use the cmake_policy command to set the policy and
suppress this warning.

Found relative path while evaluating include directories of
"vtkSciberQuestCS":

"option"
}}}
4. OK, configuring done, so I type "make" and see this:
{{{
CMake Error: Parse error in cache file 
/home/gennadiy/bin/pv.build/CMakeCache.txt. Offending entry: 
/usr/lib/../lib64/crt1.o:;In;function;`_start':
CMake Error: Parse error in cache file 
/home/gennadiy/bin/pv.build/CMakeCache.txt. Offending entry: 
/usr/src/packages/BUILD/glibc-2.11.1/csu/../sysdeps/x86_64/elf/start.S:109:;undefined;reference;to;`main'
CMake Error: Parse error in cache file 
/home/gennadiy/bin/pv.build/CMakeCache.txt. Offending entry: 
/usr/lib/../lib64/crt1.o:;In;function;`_start':
CMake Error: Parse error in cache file 
/home/gennadiy/bin/pv.build/CMakeCache.txt. Offending entry: 
/usr/src/packages/BUILD/glibc-2.11.1/csu/../sysdeps/x86_64/elf/start.S:109:;undefined;reference;to;`main'
CMake Error: Parse error in cache file 
/home/gennadiy/bin/pv.build/CMakeCache.txt. Offending entry: 
/common/intel/composer_xe_2015.0.090/compiler/lib/intel64/for_main.o:;In;function;`main':
CMake Error: Parse error in cache file 
/home/gennadiy/bin/pv.build/CMakeCache.txt. Offending entry: 
/export/users/nbtester/efi2linux_nightly/branch-15_0/20140724_00/libdev/frtl/src/libfor/for_main.c:(.text+0x2a):;undefined;reference;to;`MAIN__'

}}}
5. and then cmake (not make!) continues from HDF5 tests and
6. finally
{{{
-- Configuring incomplete, errors occurred!
See also "/home/gennadiy/bin/pv.build/CMakeFiles/CMakeOutput.log".
See also "/home/gennadiy/bin/pv.build/CMakeFiles/CMakeError.log".
}}}



On 19.02.2016 19:42, Chuck Atkins wrote:

Hi Gena,

Sometime oddities like this show up when different compiler wrappers are
being used.  In this case, your using the Intel MPI wrappers for all
compilations.  Try bypassing them for the main compilation and only using
them for MPI detection:

CC=icc CXX=icpc FC=ifort \
cmake \
   -DMPI_C_COMPILER=mpiicc \
   -DMPI_CXX_COMPILER=mpiicpc \
   -DMPI_Fortran_COMPILER=mpiifort \
   

- Chuck

On Fri, Feb 19, 2016 at 5:13 AM, Gena Bug  wrote:


Hi!

I was trying to build pv5 with mpi and osmesa and couldn't pass cmake
step. I use this command:

~/bin/cmake/bin/cmake -G "Unix Makefiles" \
-DBUILD_TESTING=OFF \
-DPARAVIEW_USE_MPI=ON \
-DPYTHON_LIBRARY="/home/gennadiy/bin/python/lib/libpython2.7.a" \
-DPYTHON_INCLUDE_DIR="/home/gennadiy/bin/python/include/python2.7" \
-DPYTHON_EXECUTABLE="/home/gennadiy/bin/python/bin/python" \
-DPARAVIEW_ENABLE_PYTHON=ON \
-DPARAVIEW_BUILD_QT_GUI=OFF \
-DVTK_USE_X=OFF \
-DOPENGL_INCLUDE_DIR="/home/gennadiy/bin/mesa/include" \
-DOPENGL_gl_LIBRARY="/home/gennadiy/bin/mesa/lib/libOSMesa.so" \
-DOPENGL_glu_LIBRARY="" \
-DVTK_OPENGL_HAS_OSMESA=ON \
-DOSMESA_INCLUDE_DIR="/home/gennadiy/bin/mesa/include" \
-DOSMESA_LIBRARY="/home/gennadiy/bin/mesa/lib/libOSMesa.so" \
-DCMAKE_INSTALL_PREFIX="/home/gennadiy/bin/paraview" \
-DCMAKE_CXX_COMPILER="mpiicpc" \
-DCMAKE_C_COMPILER="mpiicc" \
-DCMAKE_Fortran_COMPILER="mpiifort" \
-DCMAKE_BUILD_TYPE=RELEASE \
-DCMAKE_CXX_FLAGS_RELEASE=" -O2 -DNDEBUG " \
-DCMAKE_C_FLAGS_RELEASE=" -O2 -DNDEBUG " \


(cmake 3.4.1, 3.4.3 and 3.5rc3 downloaded from the site, custom python
2.7.11 and mesa 11.1.2 were used.)

and at the end of its output I see this:
{{{
...
-- Configuring incomplete, errors occurred!
See also "/home/gennadiy/bin/pv.build/CMakeFiles/CMakeOutput.log".
See also "/home/gennadiy/bin/pv.build/CMakeFiles/CMakeError.log".
}}}

Both log-files contain a lot of information however I can't figure out the
real problem -- both contain the output from failed tests and nothing about
why configuration failed.

Stdout also looks normal except messages about sizeof types:
{{{
...
-- HDF5: Performing Other Test HAVE_STAT64_STRUCT - Success
-- Looking for fstat64
-- Looking for fstat64 - found
-- Looking for stat64
-- Looking for stat64 - found
-- Check size of char
CMake Error at
/home/gennadiy/bin/cmake/share/cmake-3.4/M

[Paraview] can't cmake pv5

[Gena Bug]

Hi!

I was trying to build pv5 with mpi and osmesa and couldn't pass cmake 
step. I use this command:


~/bin/cmake/bin/cmake -G "Unix Makefiles" \
-DBUILD_TESTING=OFF \
-DPARAVIEW_USE_MPI=ON \
-DPYTHON_LIBRARY="/home/gennadiy/bin/python/lib/libpython2.7.a" \
-DPYTHON_INCLUDE_DIR="/home/gennadiy/bin/python/include/python2.7" \
-DPYTHON_EXECUTABLE="/home/gennadiy/bin/python/bin/python" \
-DPARAVIEW_ENABLE_PYTHON=ON \
-DPARAVIEW_BUILD_QT_GUI=OFF \
-DVTK_USE_X=OFF \
-DOPENGL_INCLUDE_DIR="/home/gennadiy/bin/mesa/include" \
-DOPENGL_gl_LIBRARY="/home/gennadiy/bin/mesa/lib/libOSMesa.so" \
-DOPENGL_glu_LIBRARY="" \
-DVTK_OPENGL_HAS_OSMESA=ON \
-DOSMESA_INCLUDE_DIR="/home/gennadiy/bin/mesa/include" \
-DOSMESA_LIBRARY="/home/gennadiy/bin/mesa/lib/libOSMesa.so" \
-DCMAKE_INSTALL_PREFIX="/home/gennadiy/bin/paraview" \
-DCMAKE_CXX_COMPILER="mpiicpc" \
-DCMAKE_C_COMPILER="mpiicc" \
-DCMAKE_Fortran_COMPILER="mpiifort" \
-DCMAKE_BUILD_TYPE=RELEASE \
-DCMAKE_CXX_FLAGS_RELEASE=" -O2 -DNDEBUG " \
-DCMAKE_C_FLAGS_RELEASE=" -O2 -DNDEBUG " \


(cmake 3.4.1, 3.4.3 and 3.5rc3 downloaded from the site, custom python 
2.7.11 and mesa 11.1.2 were used.)


and at the end of its output I see this:
{{{
...
-- Configuring incomplete, errors occurred!
See also "/home/gennadiy/bin/pv.build/CMakeFiles/CMakeOutput.log".
See also "/home/gennadiy/bin/pv.build/CMakeFiles/CMakeError.log".
}}}

Both log-files contain a lot of information however I can't figure out 
the real problem -- both contain the output from failed tests and 
nothing about why configuration failed.


Stdout also looks normal except messages about sizeof types:
{{{
...
-- HDF5: Performing Other Test HAVE_STAT64_STRUCT - Success
-- Looking for fstat64
-- Looking for fstat64 - found
-- Looking for stat64
-- Looking for stat64 - found
-- Check size of char
CMake Error at 
/home/gennadiy/bin/cmake/share/cmake-3.4/Modules/CheckTypeSize.cmake:124 
(try_compile):

  Cannot copy output executable

''

  to destination specified by COPY_FILE:


'/home/gennadiy/bin/pv.build/CMakeFiles/CheckTypeSize/H5_SIZEOF_CHAR.bin'

  Unable to find the executable at any of:

/home/gennadiy/bin/pv.build/CMakeFiles/CMakeTmp/cmTC_bf5e7
/home/gennadiy/bin/pv.build/CMakeFiles/CMakeTmp/Debug/cmTC_bf5e7
/home/gennadiy/bin/pv.build/CMakeFiles/CMakeTmp/Development/cmTC_bf5e7

Call Stack (most recent call first):

/home/gennadiy/bin/cmake/share/cmake-3.4/Modules/CheckTypeSize.cmake:249 
(__check_type_size_impl)
  VTK/ThirdParty/hdf5/vtkhdf5/config/cmake/ConfigureChecks.cmake:512 
(CHECK_TYPE_SIZE)
  VTK/ThirdParty/hdf5/vtkhdf5/config/cmake/ConfigureChecks.cmake:519 
(H5_CHECK_TYPE_SIZE)

  VTK/ThirdParty/hdf5/vtkhdf5/CMakeLists.txt:276 (include)
...
}}}

Can anyone point me to a real problem?


CMakeError.log.gz
Description: application/gzip


CMakeOutput.log.gz
Description: application/gzip


CMakeStdout.log.gz
Description: application/gzip
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Periodicity aware streamline?

[Gena Bug]

On 02/10/2016 05:31 PM, Berk Geveci wrote:

There is a better way. Build a multi-block structure that creates enough
copies with the appropriate transforms to advance the streamlines as many
periods as you need. Make sure to shallow copy all heavy data structures
such as data arrays. If you are using vtkImageData or vtkRectilinearGrid,
this is easy. If you are using vtkStructuredGrids or vtkUnstructuredGrids,
take a look at vtkPeriodicDataArray and its subclass
vtkAngularPeriodicDataArray. If you need other type of periodicity, you may
need to create a new subclass of vktPeriodicDataArray. Also take a look at
vtkPeriodicFilter that can create such a multi-block dataset.

AngularPeriodicFilter (since 4.4) exist that do the job, isn't it?



Best,
-berk

On Wed, Feb 10, 2016 at 9:16 AM, Andy Bauer  wrote:


Hi Tim,

There isn't any such functionality that exists directly in PV like this. A
long way of doing this may be:

- StreamTracer for first set of streamlines
- Use threshold or cut filter to get last points before they exit the
domain
- Use the Transform filter to move these points to the entrance of the
domain on the other periodic side
- StreamTracer with Custom source using Transform filter as source to
continue the streamlines
- Calculator filter to adjust IntegrationTime and other field values
(if this is important you'll probably need to do this one streamline at a
time).

This may get a bit sloppy and unwieldy but that's the best way I can think
about doing what you want.

If you do this and find a better way, please let us know!

Cheers,

Andy




On Tue, Feb 9, 2016 at 5:34 PM, Tim Gallagher 
wrote:


Hi,

I have a simulation that is periodic in 2 of the 3 directions and I would
like to plot some streamlines coming from specific points in the domain.
Some of these points are close to one of the periodic edges.

Is there a way to tell Paraview that the domain is periodic and that
streamline integration can continue from the opposite face?

Thanks,

Tim
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview




___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview






___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Resample with dataset and Cell Data

[Gena Bug]

Thanks for the quick responses, Cory

I've created a bugreport: http://www.paraview.org/Bug/view.php?id=15928


On 01/11/2016 06:39 PM, Cory Quammen wrote:

OK, that state file fails for me. Yeah, seems it might be a bug when a
multiblock dataset is used as the Input.

On Mon, Jan 11, 2016 at 10:12 AM, Gena Bug  wrote:

But you use data in points in the example, not in cells (see the attachment)


On 01/11/2016 05:53 PM, Cory Quammen wrote:


Seems to work for me.

See attached state file.

- Cory

On Mon, Jan 11, 2016 at 9:17 AM, Gena Bug  wrote:


UPD: It happens only if I use AngularPeriodicFilter (or GroupDatasets)
result as Source!


On 01/11/2016 04:51 PM, Gena Bug wrote:



Hi!

Is it possible to resample __cell__ data from Input to Source? I found
an old bug (http://www.paraview.or/Bug/print_bug_page.php?bug_id=14659)
and from its description the answer is true, but my attempts aren't
successful -- I have unstructured grid with cell data as Input and
Plane/Wavelet as Source. After resampling I don't see cell data from
Input in the result (only point-data array vtkValidPointMask which shows
intersection between Input and Source).

PV 5.0.0 64-bit, Linux, downloaded from www.paraview.org
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview












___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Resample with dataset and Cell Data

[Gena Bug]

UPD: It happens only if I use AngularPeriodicFilter (or GroupDatasets) 
result as Source!


On 01/11/2016 04:51 PM, Gena Bug wrote:

Hi!

Is it possible to resample __cell__ data from Input to Source? I found
an old bug (http://www.paraview.or/Bug/print_bug_page.php?bug_id=14659)
and from its description the answer is true, but my attempts aren't
successful -- I have unstructured grid with cell data as Input and
Plane/Wavelet as Source. After resampling I don't see cell data from
Input in the result (only point-data array vtkValidPointMask which shows
intersection between Input and Source).

PV 5.0.0 64-bit, Linux, downloaded from www.paraview.org
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Resample with dataset and Cell Data

[Gena Bug]

Yes, your example works for me. Sorry, forgot to mention in the original 
email that I use AngularPeriodicFilter as Source for Resample -- in that 
case my issue happens.


On 01/11/2016 05:35 PM, Cory Quammen wrote:

Hmm, seems to work for me with an unstructured grid based on a
Delaunay tetrahedralization of a sphere source. See the attached
statefile.

The Resample With Dataset filter will produce a point array from your
Input's cell array data. Your are saying that isn't happening?

Cheers,
Cory

On Mon, Jan 11, 2016 at 8:51 AM, Gena Bug  wrote:

Hi!

Is it possible to resample __cell__ data from Input to Source? I found an
old bug (http://www.paraview.or/Bug/print_bug_page.php?bug_id=14659) and
from its description the answer is true, but my attempts aren't successful
-- I have unstructured grid with cell data as Input and Plane/Wavelet as
Source. After resampling I don't see cell data from Input in the result
(only point-data array vtkValidPointMask which shows intersection between
Input and Source).

PV 5.0.0 64-bit, Linux, downloaded from www.paraview.org
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview





___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

[Paraview] Resample with dataset and Cell Data

[Gena Bug]

Hi!

Is it possible to resample __cell__ data from Input to Source? I found 
an old bug (http://www.paraview.or/Bug/print_bug_page.php?bug_id=14659) 
and from its description the answer is true, but my attempts aren't 
successful -- I have unstructured grid with cell data as Input and 
Plane/Wavelet as Source. After resampling I don't see cell data from 
Input in the result (only point-data array vtkValidPointMask which shows 
intersection between Input and Source).


PV 5.0.0 64-bit, Linux, downloaded from www.paraview.org
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 5.0.0-RC2 now available for download

[Gena Bug]

Hi!

New release always warn me about using PointGaussian representation for 
cell data:


Warning: In 
/home/kitware/dashboards/buildbot/paraview-debian6dash-linux-shared-release_opengl2_qt4_superbuild/source-paraview/ParaViewCore/ClientServerCore/Rendering/vtkPointGaussianRepresentation.cxx, 
line 269
vtkPointGaussianRepresentation (0x1e70b190): Using cell data in 
PointGaussian representation


Because all our data are stored in cells (pvd->pvtu->vtu) it's a little 
bit annoying to see this all the time.


On 15.12.2015 17:37, Utkarsh Ayachit wrote:

Folks,

ParaView 5.0.0-RC2 is now available for download[1]. Checkout the release
notes on the Kitware blog [2].

As always, we look forward to your feedback [3].

Also stay tuned to the Kitware Blog [4] for upcoming features and
enhancements to ParaView, ParaView Catalyst, ParaViewWeb and much
more!

- The ParaView team

[1] http://www.paraview.org/download/
[2] http://kitware.com/blog/home/post/998
[3] http://paraview.uservoice.com
[4] http://www.kitware.com/blog/
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

[Paraview] Can't set custom range value too small

[Gena Bug]

Hi!

Tried PV rc1 (5.0.0-RC1-20-g58e9aa1 64-bit) and found that I can't set 
range value (maximum) if it less than 1e-16 in Color Map Editor (Rescale 
to custom range). Yes, it's not a very good value, however, minimum can 
be set to less values.

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] passing argument to pvpython script

[Gena Bug]

On 25.11.2015 18:51, Ben Boeckel wrote:

On Wed, Nov 25, 2015 at 15:11:43 +0300, Gena Bug wrote:

And this works fine untill I tried new version. In 5rc1 I always get
Segmentation Fault:
Error running
"~/ParaView-5.0.0-RC1-Qt4-OpenGL2-Linux-64bit/lib/paraview-5.0/pvpython"
"myscript.py" "filename"Segmentation fault

Seems, sys module couldn't be imported... Is it problem with rc-version?
How can I correctly pass arguments to a script?


What distro? I ran into something with similar symptoms and fixed it
here (no one else could reproduce it, so we didn't delay RC1 for it):

Debian stable/testing amd64 with KDE4/5



 https://gitlab.kitware.com/paraview/paraview/merge_requests/478

Do the lastest binaries work for you?

Yep, it works! Thank you!


 
http://www.paraview.org/paraview-downloads/download.php?submit=Download&version=nightly&type=all&os=all&downloadFile=ParaView-5.0.0-RC1-18-g7560de5-Qt4-OpenGL2-Linux-64bit.tar.gz

Thanks,

--Ben


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

[Paraview] passing argument to pvpython script

[Gena Bug]

Hi!

I often write simple scripts for pvpython which take one or more 
arguments (usually filenames) and run them so:

$ pvpython myscript.py filename

Till version 5rc1 I parse arguments using simple analysis of sys.argv, 
like this:

{{{
...
import os, sys
from paraview.simple import *
paraview.simple._DisableFirstRenderCameraReset()

if len(sys.argv) < 1:
sys.exit('One parameter, name of an input file, is mandatory.')
if not os.path.exists(sys.argv[1]):
sys.exit('Specified file "' + sys.argv[1] + '" does not exists!')

data = OpenDataFile(sys.argv[1])
...
}}}

And this works fine untill I tried new version. In 5rc1 I always get 
Segmentation Fault:
Error running 
"~/ParaView-5.0.0-RC1-Qt4-OpenGL2-Linux-64bit/lib/paraview-5.0/pvpython" 
"myscript.py" "filename"Segmentation fault


Seems, sys module couldn't be imported... Is it problem with rc-version? 
How can I correctly pass arguments to a script?

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Fwd: Re: ANN: ParaView 4.3.1 is available for download

[Gena Bug]

Thanks, Utkarsh! I also reported a bug:
http://www.paraview.org/Bug/view.php?id=15278
They should be combined I think


On 01/26/2015 06:32 PM, Utkarsh Ayachit wrote:

Ah! Thanks, Gena. It must have fell through the cracks when we
refactored the settings infrastructure for 4.2.  I've reported a bug:
http://www.paraview.org/Bug/view.php?id=15283

Utkarsh

On Fri, Jan 23, 2015 at 3:47 AM, Gena Bug  wrote:



On 21.01.2015 17:44, Utkarsh Ayachit wrote:


Gena,


a) can't permanently change camera settings (Edit->Settings->Camera) --
default values restored after restart



If I am not mistaken, this was never supported, right? Mind adding a
feature request to the bug tracker so we don't forget about this?
Thanks.


No, it's not right. I've just checked PV 4.1.0 and it saves its camera
settings permanently.




b) it's really hard to work with advanced properties of Line Chart View
-- for example simply add notation to an axis is difficult! It would be
great to have separate window for such settings (as it was in previous
releases, 4.1 and earlier).



That's doable. See Chapter 9, Section 9.2. Or this blog post [1]


Thanks, that's better. Not so convenient as it was before but OK


[1] http://www.kitware.com/blog/home/post/673

Utkarsh
.




.


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Fwd: Re: ANN: ParaView 4.3.1 is available for download

[Gena Bug]

On 21.01.2015 17:44, Utkarsh Ayachit wrote:

Gena,


a) can't permanently change camera settings (Edit->Settings->Camera) --
default values restored after restart


If I am not mistaken, this was never supported, right? Mind adding a
feature request to the bug tracker so we don't forget about this?
Thanks.
No, it's not right. I've just checked PV 4.1.0 and it saves its camera 
settings permanently.





b) it's really hard to work with advanced properties of Line Chart View
-- for example simply add notation to an axis is difficult! It would be
great to have separate window for such settings (as it was in previous
releases, 4.1 and earlier).


That's doable. See Chapter 9, Section 9.2. Or this blog post [1]

Thanks, that's better. Not so convenient as it was before but OK


[1] http://www.kitware.com/blog/home/post/673

Utkarsh
.


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

[Paraview] Fwd: Re: ANN: ParaView 4.3.1 is available for download

[Gena Bug]

 Forwarded Message 
Subject: Re: [Paraview] ANN: ParaView 4.3.1 is available for download
Date: Wed, 21 Jan 2015 15:06:02 +0300
From: Gena Bug 
To: Utkarsh Ayachit 

Hi,

First of all -- thank you for this great release and especially for the
free user guide!

However I've noticed couple glitches on my debian testing amd64:
a) can't permanently change camera settings (Edit->Settings->Camera) --
default values restored after restart
b) it's really hard to work with advanced properties of Line Chart View
-- for example simply add notation to an axis is difficult! It would be
great to have separate window for such settings (as it was in previous
releases, 4.1 and earlier).


On 21.01.2015 00:17, Utkarsh Ayachit wrote:

Folks,

ParaView 4.3.1 is now available for download. Checkout the release
notes on the Kitware blog [1].

As always, we look forward to your feedback [2].

Also stay tuned to the Kitware Blog [3] for upcoming features and
enhancements to ParaView, ParaView Catalyst, ParaViewWeb and much
more!

- The ParaView team

[1] http://www.kitware.com/blog/posts/view/825
[2] http://paraview.uservoice.com
[3] http://www.kitware.com/blog/
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview




___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview

Re: [Paraview] Cell to point, and ghost cells

[Gena Bug]

Hi, Scott,

Have you tried to use CleantoGrid first, before CelltoPoint?

On 20.05.2014 01:42, Scott, W Alan wrote:

I have a user that is getting visual artifacts between simulation processor 
boundaries when using cell to point.  My user is reading two files into 
ParaView.  He then runs cells to point.  He then colors by a former cell 
variable, which is now a point variable.  He is seeing artifacts at the 
boundaries of the two files.   I am only on one processor for ParaView.

These artifacts are being created because we don't have ghost cells around each 
file's data.  I tried turning piece invariant on in the cell to point filter, 
but it does nothing.

So, my questions - is this a feature or a bug?  Do we want to fix it?  How hard 
is it to fix?

Thanks,

Alan





___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] bad scaling of low values data ranges in 4.1.0rc1

[Gena Bug]

Thanks, Utkarsh!

On 11/27/2013 11:15 PM, Utkarsh Ayachit wrote:

Thanks for reporting. Just pushed a fix.

On Wed, Nov 27, 2013 at 12:53 PM, Gena Bug  wrote:

Hi!

Found another difference between 4.0.1 and 4.1.0rc1: the last doesn't
respect data ranges with upper bound value less than 1e-5 when coloring the
data. I attached an example that demonstrate the problem: it's a 1D mesh
with 100 hexahedral cells: half region has rho = 1e-11 and another half has
rho = 5e-6. If you open file in 4.1.0rc1 then color map will be from 1e-11
to 1e-5 (not 5e-6), rescaling doesn't help. In 4.0.1 all works fine.

Env: both 4.0.1 and 4.1.0rc1 were downloaded from the site and installed on
Debian testing amd64

Bug: http://paraview.org/Bug/view.php?id=14428

___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview





___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] bad scaling of low values data ranges in 4.1.0rc1

[Gena Bug]

Hi!

Found another difference between 4.0.1 and 4.1.0rc1: the last doesn't 
respect data ranges with upper bound value less than 1e-5 when coloring 
the data. I attached an example that demonstrate the problem: it's a 1D 
mesh with 100 hexahedral cells: half region has rho = 1e-11 and another 
half has rho = 5e-6. If you open file in 4.1.0rc1 then color map will be 
from 1e-11 to 1e-5 (not 5e-6), rescaling doesn't help. In 4.0.1 all 
works fine.


Env: both 4.0.1 and 4.1.0rc1 were downloaded from the site and installed 
on Debian testing amd64


Bug: http://paraview.org/Bug/view.php?id=14428



  

  

  
  



  
  

  

  
  
_
àT
Ê'xœuËŽGrEùE‘jEñ?üú€ò·ø1äçp=+®znÜö^0Ð
à@C!“Ç5l‘4ÔÙDœ“—›D]UTdVwGÝÊ̺vmýûǸüwZíß\6="þGöË¿§A&þþÓ/ÿþMü/Ïóïâùë_þýG8ÿ¹ø?ýî—ÏÄÿp÷?Åÿö²ù¯×ópþïÄÿâò:_ˆ_\Æýïpý߇¸?ˆŸ]ÆýŸ÷GñŸ/ãþ¯ø¿\žç¥øß_6¯Äÿêòü¿ÿ“Ëë|-þñ2®ù?_Æ}â¾
q߉ÿéeÜÿÿp×|ÅýIüï.›?„¸ïC¾!_óÕÏ?‡|?„¸CÜO!®ùåi~}íÏÉ//çwæ«?¯‹¯Æ|ýÖ¸!þחqÍW\ó÷fˆk¾Ò5_qo…¸æ+î!®ùŠk¾úùvˆk~öϾ_÷ƒù_ó•ï×|åûUˆk¾ò5_ùÞ
qÍWÜ{¡ŸÍ×}õuˆk¾âš¯~>_­ùÊ×|õóý×|åû«¯ùŠk¾®ÿAèó՘ÿëåuš¯~þ&Ä5_qÍWk¾âš¯¸C\ó×|5æk\ÌWÜoC\ó×|µæ+_ó÷Qà]wõïoÔ]àOÄQwA&Žº«9ê®æ¨»pþsqÔ]ÍQw5G݅¼ž‡ó'Žº«9ê.\ÿ÷!î⨻÷GqÔ]ÍQw5GÝÕuWsÔ]ÍQw5G݅¸oCÜw⨻š£îBܟÄQw!îûïEÈ×uòýâ~q?…¸æ¨»š£îB^_9ê®æ¨»×u⚣îBÜ[!®9ê.Ä5G݅~¾⚣îÂý`ŽºùÞ	qÍQw!®9ê.ä{7Ä5G݅~6G݅¸æ¨»ÐÏ'â«5G݅~¾⚣îB¾æ¨»pýB?˜¯Æuúù›×uúÓuâ>qÍQw!_sÔ]ˆûmˆkŽºùš£îBÜGËï:‚ßu¿ë~×ü®#ø]Gð»ŽàwÁï:‚ßu¿ë~×ü®#ø]Gð»ŽàwÁï:‚ßu¿ë~×ü®#ø]Gð»ŽàwÁï:‚ßu¿ë~×ü®#ø]Gð»ŽàwÁï:‚ßu¿ë~×ü®#ø]Gð»ŽàwÁï:Pw5G݅þ”¯u¬Æ<ø]Gð»Ô]ˆ+ÿê*®yð»Žàw¨»WþÕU\óàw¨»×uîóàwÁï:Pw!_ùWGð»Žàw¨»×<ø]Wýlü®u⚣îj¾ZóàwÁï:Pw!_ùWWùš¿ë@݅~0_yð»Žàw¨»×|µæÁï:‚ßu îB\ó՘£îB\ùQê.Ä5_­yð»ŽàwÁïbÝ.¿‹uôò»Xwuü.Ö]8¿ü.Ö]Ý¿‹uò’ßź«Ûàw±îÂõËïbÝÕmð»Xwuü.Ö]Ý¿‹uW·ÁïbÝÕmð»Xw!®ü.Ö]Ý¿‹uW·Áïb݅|åk±îB?Ëïb݅¸ò»Xw!®9ê®æ¨»ÐŸòµXw5~ë.Ä5~ë®æÁïb݅¸æÁïb݅¸æ¨»×uîóàw±îB\óàw±îB¾æ¨»×<ø]¬»p_É¿b݅¸æ¨»ðóaü.Ö]ˆkü.Ö]ˆkŽºý`¾óàw±îB\sÔ]èOóàw±îB\sÔ]È×uâʏb݅¸æ«5~ë.ñÿ7ÅOïóSx_'õw¾ÔÞýF}àÝÿû|­¯q¤>𾨼ï«}¾Ö×ý¹Ï×úºÏ÷ùZ_?/ûñýøZ_?¿û|­_ÇÖÞ¿OöùZ_¿—öùŠ÷ï·ýøZ_¿'÷ùZ¿Ž­¼oSxÿþß_¿õõw„úÀûïõ÷ß5êￏû|Åûï,õ÷ßë}ÿ[_÷÷ùŠwý°¿¬¯:„úÀ»žÙ¯x×Eûñµ¾ê«}¾â]§íóµ¾ê½ýøŠwÝH}à]îóµ¾êØ}¾â]Sx×ÕÔÞõù>_ë×±õ÷óÂ>_ñ~î؏¯õõü²_ñ~¢>ð~žÚ¯õõ\¶ÏW¼Ÿïöãk}='îóïçÍ}¾Ö×së>_ëëùwŸ¯x?Gï󵾞ǩ¼Ÿë÷ùŠ·?°Ï×úòöùŠ·_A}àí{Pxû'ÔÞ>õ·ŸC}àíQxûKû|ÅÛ§Úçk}ù]û|ÅÛ7£>ðöߨ¼}<êo?úÀÛWÜç+Þþä~|ÅÛçÜç+Þ~é~|ÅÛwݏ¯õåßîóoxŸ¯xûÉÔÞ¾4õ·¿M}àí“SxûíÔÞ¾=õ·ÿO}àýaŸ¯x¿ >ð~¯±ÏW¼ßPx¿g¡>ð~_³¿~ñ~ï³ïñ~D}àýŠúÀû}õ÷{±ýõ‹÷ûµýx‰÷{ºýùÅû}ß^/Þï
©\>Xýw¾—,N?-ðÓÇzð֗¯E=xëWk=xëé7Þúòµ¨oý:´ùZŽ|­G¾Öó=ûÇoÂø~Æ×zpäk=8òµùZŽ|„|„ñµùZŽ|­o=ßSŽë·¼õ|o8~^îKÞz¾Ç	ùž„|OÂýi=8úßzpäûuÈ÷ëp?XŽûÙzpŒï½0¾÷ÂøZÏyY3¯»!ß»!_ëÁ1¾_…ñýJz¾'
ùZÏùo3¯;!ß;á~¶žóñŠó=ràÈ×zÎ,¾ZëÁ‘ïíïí0¾Öƒc|¿ãûE¸Ÿ­ÇøZÏùœ3¯[!ß[a|­çüҙ×͐ï͐¯õàÈ×z˝yÝùÞùZÏy¼Å9ÿ$pä{=ä{=äk=ç'ϼ®…|¯…ûÙzpüü~žçxë9_(ðÖsÞQàøýðAzÎ'/ÎyP#ߋïEÈ×zßy½ù¾—žóÄo=ç›ÞzÎ[÷§õ\0ózò}Æ÷mß·!ß7!ß7a|_‡ñ}Æ×z®û˜yý>äûûï«ï«p?¿÷óKé93ðÖs>gà­ç¼ÐÀ[Ïù¥·žóTo=绎|_„|_HÏù·#ßç!ßçÒs>pà­ç¼âÀqýÏÂõ?ýúÿ\zΗ¼õœwxëË×¢×®ÿ,Œ×Ó0^OÃùŸ„ó?	úÇAÿXúòµöõÆçu‹“Ë×ÒúÇâÁ×Ò:ÊâëØzðÖ_Kë:‹¯ÖzðÖ_KëL‹_KëU‹¯CëÁ‘¯õàÈ×zpäk}ðÁ´ïJà_ëÁ‘¯õàÈ×zpäk}ðÁ´¿Mà_ëÁ‘¯õàÈ×zðÖ_‹×o=x냯¥õòŃ¯¥u÷Ń¯¥õû3/ùNä¸?­Gÿ[Ž|å;iƒ9îփã~¶>ø`Ú+pŒ¯õÁÓ>]#_ëÁ1¾òÈ[|-í1ó²>ø`Ú-pÜÏÖLû³Ž|­>ØÕ·ùʧҾ(s­ÇøÊw"Çýl=8Æ×úàƒi¿À1¾Öì4øZäÈ×zpäk}ðÁ´bàÈ×úàƒi_ÇÀ‘¯|*í_4ó²>ø`Ú¯2pÜÏփãçW>•öw*|-íU<øZÚoªxðµ´oUñàkiÿ«™—|*í£5ó²>ø`Ú75ðÖ_Kûƒ¾–ö+|-íW6ïC냦ýiÇøÊ×Ò>l3/ùZÚÏmŽ£|*í7ÇÑúàƒiàÀ‘¯|-íwW<øZÚ7¯xðµ´ÿ^ñàki¿âÁ×Ò~€Åƒ¯¥}‹_Kû¾–ö9œyÉ×Ò~‰Åƒ¯¥}g^òµ´cñàkiÈâÁ×Ò~’ó:åki_ÊÙÏòµ´¿eñàkiŸÌâÁ×Ò~›Åƒ¯¥};çuÊ×ÒþŸs\äkiÑyùZڏtrùZÚ×´xðµ´?êä½nñ´þ¿À¹ž±õ_]Ÿõs=cë¿ÊÃúÀ¹žùZ_¾õs=cëçzFäký:¶>p®gD¾ÖcÝ"ÆWüj|­œë‘¯õëØúÀ¹žùZu‹ÈWœë1¾Ö—¯µÏ×úul}àGùZÔÎõŒ¸~ë±n±õs=#~^ޱõåkíó¿º?­üªÿ­œë‘¯8×3â~°¾|-êçzFŒ¯8×3b|­/_kŸ¯8×3"_ëË×ڏ¯8×3¶>p®gD¾Ö—¯µÏWœëq?[u‹­œë‘¯õëØúÀ¹žùŠs=#Æ×úòµöã+ÎõŒ¸Ÿ­ÇºEŒ¯õåkíóçzFŒ¯õåkíóçzFäk=Ö-"_ëË×Úç+ÎõŒÈ×úòµ¨œë‘¯8×3"_ëË×Úç+ÎõŒ¸Ÿ­ÇºEüüŠs=cëçzÆÖÎõŒøý ÎõŒ­œë‘¯8×3"_ë±nùŠs=cëçzÆÖÎõŒ­œëqZu‹ÈWœë1¾â\ψ|Źžã+ÎõŒ_ë±nùŠs=#òçzFÜÏâ\ÏØúÀ¹ž±õs=cëçzÆÖÎõŒ­œë[8×3"_q®gl}à\ψ|Źž±õs=cëçzF\¿8×3¢ÿŹž±õs=cëçzÆÖÎõŒ¸~q®gÄx‰s=#Î/ÎõŒÐ‹s=#ê
q­—¬úæ\wY-×oNý™8ú¿[®K­–ë[çùÏŹ޶Z®Û­–ëg^ÏÃù¿çºæj¹>z^ÿ÷!îâ\÷=ãþ(ÎuèÕr={µ\_-××WËuúÕr½µÜ7`Æ}â¾ç~Õr_…÷'qîó0ã¾ù^„|͹ÆÌ÷Cˆû1Äý⚣>oŽ:ýy]|ýš0ÇóKsîë2ãšsŸ™×ωˆ{+Ä5ç~>3®9žÇÑÏ·C\óÕ~)Îý—ªå>N3ß;!®9÷§šqÍá/!ß»!®9÷
«võ³9|<Ä5_qÍW{"¾þ|͹ÜŒkÎ}íf¾æ+®ùj„~0_ç7ç>„ÕÂÿG\ó×|õ§9÷{œq†¸æ+®ùÊ×|‹9Þg!®ùŠk¾ò5çþ¥3î#qÖoÕ²N«–õaµ¬3§þLœuoµ¬Ÿ«e>Ï.Îç‚jù|Q-ŸSf^ÏÃù¿çóWµ|Ž›×ÿ}ˆûƒ8ŸOgÜÅù¼\-Ÿ»«åó{µô
ª¥ŸP-}‰jéo̸oCÜwâômª¥ÿ3ãþ$N?jÆ}ò½ùšÓ¯›ù~q?†¸ŸB\sÔ]ÍQw¡?¯‹£îÂï‡âôŸg\súá3®9ê.Ľâšó½ÃŒkŽºý|;Ä5_í—â|OT-ß7Í|æ|6㚣îB¾wC\s¾¯¬uC\sÔ]èçqÔ]Èלï»g\s¾Ÿùš£îÂõ?ý`Žº«9çKTËy³5G݅þ4缔÷aˆkŽºùš£îBÜoC\sÔ]Èלó¬fÜGâÁïÒ~_S/¿Kû•M½ü.íŸV<ø]ÚÏmž_~—ö—+ü.íw7ó’ߥý÷Š¿Kû
Îë—ߥý	‹¿Kû%~—öo,ü.í'Y<ø]Úß²xð»´ßæŒ+¿Kû~—ö#-ü.í:󕯥ýZ‹¿KûÇθò»´ŸíŒkŽº«9ê.ô§|-í\<ø]ÚÇxÆ5~—ög.ü.í=ãš¿Kû`ϸ樻×|µò¯´ßxñàwiÿó×<ø]Ú×}ækŽº

Re: [Paraview] screenshots in png format are big

[Gena Bug]

http://paraview.org/Bug/view.php?id=14426

(Did I choose the wrong Project -- ParaViewPro? Should it be ParaViS?)

On 11/26/2013 08:52 PM, Burlen Loring wrote:

it could be a bug if you saw a big increase in file size of saved png
images between versions when rendering exactly the same scene. It'd be
helpful if you could create a bug report, with steps to reproduce, and
two png images that are different size.

On 11/25/2013 05:24 PM, Gena Bug wrote:

On 11/26/2013 05:03 AM, Burlen Loring wrote:

that's generally expected because png's compression is loss-less while
jpg's lossy. png uses zlib which does have a few options for adjusting
compression vs decode/encode speed but looks like they're not exposed in
PV.

So is this a bug? For me it is because in previous version of PV
(4.0.1) I'm getting much smaller png file (almost 3 times smaller than
jpg).



On 11/25/2013 02:42 PM, Gena Bug wrote:

Hi!

I've noticed that screenshot in png format has too big size compared
to, for example, jpg. Tried to play with output image quality -- size
didn't changed. For jpg all works as expected...


P.S. ParaView 4.1.0-RC1 64-bit downloaded from the site, OS: Debian
testing amd64
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview









___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] screenshots in png format are big

[Gena Bug]

On 11/26/2013 05:03 AM, Burlen Loring wrote:

that's generally expected because png's compression is loss-less while
jpg's lossy. png uses zlib which does have a few options for adjusting
compression vs decode/encode speed but looks like they're not exposed in
PV.
So is this a bug? For me it is because in previous version of PV (4.0.1) 
I'm getting much smaller png file (almost 3 times smaller than jpg).




On 11/25/2013 02:42 PM, Gena Bug wrote:

Hi!

I've noticed that screenshot in png format has too big size compared
to, for example, jpg. Tried to play with output image quality -- size
didn't changed. For jpg all works as expected...


P.S. ParaView 4.1.0-RC1 64-bit downloaded from the site, OS: Debian
testing amd64
___
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview





___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] screenshots in png format are big

[Gena Bug]

Hi!

I've noticed that screenshot in png format has too big size compared to, 
for example, jpg. Tried to play with output image quality -- size didn't 
changed. For jpg all works as expected...



P.S. ParaView 4.1.0-RC1 64-bit downloaded from the site, OS: Debian 
testing amd64

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 4.0.0-RC2 now available for download

[Gena Bug]

Hi!

I've noticed that version for 64bit linux built with libc 2.15 has annoying 
delays when zooming data. There is no such delay in version built with libc 
2.3.6. I'm using debian testing amd64 with libc (eglibc) 2.17. Am I alone with 
this problem?


-|-
Гена.

On Tue May 28 2013 23:44:09 Utkarsh Ayachit wrote:
> Folks,
> 
> In preparation of the next ParaView release, the ParaView 4.0.0, RC2
> (Release Candidate 2) is now available for download
> (http://paraview.org/paraview/resources/software.php). Those looking
> to check the source out from git, the git tag name is "v4.0.0-RC2".
> 
> We will have a detailed summary for the new features and enhancements
> in this release soon. In the mean time, a complete list of features
> implemented and bugs fixed in this release can be found on the bug
> tracker (http://paraview.org/Bug/changelog_page.php).
> 
> The ParaView Team
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 4.0.0-RC1 now available for download

[Gena Bug]

May be legend's font size? It's very small (default size is 12)

-|-
Гена.

On Thu May 23 2013 21:59:04 Utkarsh Ayachit wrote:
> > minor, the font size for contours is extremely small, would it be
> > possible to increase the default value closer to the source text font
> > size.
> 
> I am not sure I follow, which font size are you referring to? On the
> contours panel? Can you attach a screenshot to make things clearer,
> please? Thanks.
> 
> Utkarsh
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
<>___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 4.0.0-RC1 now available for download

[Gena Bug]

On Thu May 23 2013 18:03:57 Utkarsh Ayachit wrote:
> Oops, sorry, I should I read the email properly. Any reason why you're
> closing the stdout stream? ParaView captures the streams and replaces
> them with custom ones.
No special reason, just a habit from a c++-world. Thanks for clarify.

> Utkarsh
> 
-|-
Гена.

> On Thu, May 23, 2013 at 9:08 AM, Utkarsh Ayachit
> 
>  wrote:
> > Can you share your python script of the section that's failing please?
> > 
> > Utkarsh
> > 
> > On Thu, May 23, 2013 at 6:06 AM, Gena Bug  wrote:
> >> On Wed May 22 2013 21:56:04 Utkarsh Ayachit wrote:
> >>> Folks,
> >> 
> >> Hi!
> >> 
> >> My old python-scripts that works fine with 3.98.1 are now complains
> >> about printing to file-object. May be I do it wrong? This simple
> >> script:
> >> 
> >> import sys
> >> out = sys.stdout
> >> 
> >> if len(sys.argv) > 1:
> >> out = open('foo.txt', 'w')
> >> 
> >> out.write('foo\n')
> >> out.close()
> >> sys.exit()
> >> 
> >> works with 3.98.1 (and previous) but not with 4.0.0rc1:
> >> $ ~/ParaView-4.0.0-RC1-Linux-64bit/bin/pvpython foo.py
> >> foo
> >> 
> >> Traceback (most recent call last):
> >>   File "foo.py", line 6, in 
> >>   
> >> out.close()
> >> 
> >> AttributeError: 'vtkPythonStdStreamCaptureHelper' object has no
> >> attribute 'close'
> >> 
> >> Can you explain me how to get rid of this error? Thanks in advance!
> >> 
> >> P.S. Debian testing amd64, paraview 4.0.0rc1 downloaded from the site as
> >> binary for linux 64bit platform
> >> 
> >>> In preparation of the next ParaView release, the ParaView 4.0.0, RC1
> >>> (Release Candidate 1) is now available for download
> >>> (http://paraview.org/paraview/resources/software.php).
> >>> 
> >>> We will have a detailed summary for the new features and enhancements
> >>> in this release soon. In the mean time, a complete list of features
> >>> implemented and bugs fixed in this release can be found on the bug
> >>> tracker (http://paraview.org/Bug/changelog_page.php).
> >>> 
> >>> The ParaView Team
> >>> ___
> >>> Powered by www.kitware.com
> >>> 
> >>> Visit other Kitware open-source projects at
> >>> http://www.kitware.com/opensource/opensource.html
> >>> 
> >>> Please keep messages on-topic and check the ParaView Wiki at:
> >>> http://paraview.org/Wiki/ParaView
> >>> 
> >>> Follow this link to subscribe/unsubscribe:
> >>> http://www.paraview.org/mailman/listinfo/paraview
> >> 
> >> -|-
> >> Гена.
> >> 
> >> ___
> >> Powered by www.kitware.com
> >> 
> >> Visit other Kitware open-source projects at
> >> http://www.kitware.com/opensource/opensource.html
> >> 
> >> Please keep messages on-topic and check the ParaView Wiki at:
> >> http://paraview.org/Wiki/ParaView
> >> 
> >> Follow this link to subscribe/unsubscribe:
> >> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 4.0.0-RC1 now available for download

[Gena Bug]

On Wed May 22 2013 21:56:04 Utkarsh Ayachit wrote:
> Folks,
Hi!

My old python-scripts that works fine with 3.98.1 are now complains about 
printing to file-object. May be I do it wrong? This simple script:

import sys
out = sys.stdout
if len(sys.argv) > 1:
out = open('foo.txt', 'w')
out.write('foo\n')
out.close()
sys.exit()

works with 3.98.1 (and previous) but not with 4.0.0rc1:
$ ~/ParaView-4.0.0-RC1-Linux-64bit/bin/pvpython foo.py 
foo
Traceback (most recent call last):
  File "foo.py", line 6, in 
out.close()
AttributeError: 'vtkPythonStdStreamCaptureHelper' object has no attribute 
'close'

Can you explain me how to get rid of this error? Thanks in advance!

P.S. Debian testing amd64, paraview 4.0.0rc1 downloaded from the site as binary 
for linux 64bit platform

> In preparation of the next ParaView release, the ParaView 4.0.0, RC1
> (Release Candidate 1) is now available for download
> (http://paraview.org/paraview/resources/software.php).
> 
> We will have a detailed summary for the new features and enhancements
> in this release soon. In the mean time, a complete list of features
> implemented and bugs fixed in this release can be found on the bug
> tracker (http://paraview.org/Bug/changelog_page.php).
> 
> The ParaView Team
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview

-|-
Гена.

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] pvbatch and process id

[Gena Bug]

Hi!

I'm trying to get a current process id from within a pvbatch script.
I found a solution here
(http://www.paraview.org/pipermail/paraview/2010-April/016759.html)
but this trick doesn't work for me.

I wrote a very simple script:
from paraview.simple import *
sm = servermanager
print 'parts = ', sm.ActiveConnection.GetNumberOfDataPartitions()
print 'my id = ', sm.vtkProcessModule.GetProcessModule().GetPartitionId()

If I run it with custom compiled paraview (with MPI enabled) I get:
$ mpirun -np 2 ~/projects/ParaView-build/bin/pvbatch tst_pvbatch.py 
parts =  2
my id =  0

If I run it with pvbatch downloaded from www.paraview.org I get:
$ mpirun -np 2 ~/paraview/bin/pvbatch tst_pvbatch.py 
parts =  1
my id = parts =  1
my id =  0
 0

What am I doing wrong?

-|-
Гена.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Finding pvpython command corresponding to actions performed through GUI

[Gena Bug]

1. Tools->Start Trace
2. do your stuff in GUI
3. Tools->Stop Trace

-|-
Гена.

On Friday 07 December 2012 08:42:42 Indrajit Jagtap wrote:
> If I know a how to do a certain thing in Paraview GUI, how do I find the
> corresponding pvpython commands ?
> Is there a way of obtaining the pvpython commands for the actions
> performed in paraview GUI ?
> 
> Regards,
> Indrajit
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Charts automatic scaling in animation

[Gena Bug]

On Monday 03 December 2012 18:49:18 Biddiscombe, John A. wrote:
> Above the chart, look at the little "view options" button and each axis has
> some stuff you can edit
I can't see any suitable stuff there: only scaling button and ability to change 
labels (but not range!), see attached screenshot.

-|-
Гена.
 
> -Original Message-
> From: paraview-boun...@paraview.org [mailto:paraview-boun...@paraview.org]
> On Behalf Of Yves Rogez Sent: 03 December 2012 13:34
> To: paraview@paraview.org
> Subject: [Paraview] Charts automatic scaling in animation
> 
> Hi,
> 
> I made an animation over my data and plot some data in line chart view.
> When I play the animation, chart automatically adjusts its scales (over
> both X and Y axis) at every frame update, so I can't see clearly the
> evloution of my values over time...
> 
> Is there any manner to switch off the automatic scaling of a chart view ?
> 
> Thank you,
> 
> Yves
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
<>___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Calculate Volume integral value at ParaView

[Gena Bug]

On Fri November 23 2012 19:35:33 qiu_gmail wrote:
> Thanks !
> 
> I load the date into Integrate Variables, and the date is shown in a table.
> Then what is the hint for the next step? I check the manual for Integrate
> Variables(http://paraview.org/OnlineHelpCurrent/IntegrateAttributes.html),
> but doesn't help.
Sorry for delay, Derek..

What do you mean by 'next step'? It's over, no more steps needed. In the table 
volume integrals of your data are presented, one value for each data array.
 
> Derek Chu
> 
> -Original Message-
> From: Gena Bug [mailto:archaero...@mail.ru]
> Sent: Friday, November 23, 2012 1:43 PM
> To: paraview@paraview.org
> Cc: qiu_gmail
> Subject: Re: [Paraview] Calculate Volume integral value at ParaView
> 
> On Fri November 23 2012 14:50:55 qiu_gmail wrote:
> > Hello!
> 
> Hi!
> 
> > Does anybody knows how to calculate volume integral result in
> > ParaView? I have a unstructured mesh with scale energy source. I would
> > like to calculate the integral energy over the whole mesh.
> 
> Seems, Filters -> Data Analysis -> Integrate Variables is suitable for
> you...
> 
> > If mesh file needed, please reply with your email.
> > 
> > 
> > 
> > Thanks in advance!
> > 
> > 
> > 
> > Derek Chu
> 
> -|-
> Гена.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Calculate Volume integral value at ParaView

[Gena Bug]

On Fri November 23 2012 14:50:55 qiu_gmail wrote:
> Hello!
Hi!
 
> Does anybody knows how to calculate volume integral result in ParaView? I
> have a unstructured mesh with scale energy source. I would like to
> calculate the integral energy over the whole mesh.
Seems, Filters -> Data Analysis -> Integrate Variables is suitable for you...

> If mesh file needed, please reply with your email.
> 
> 
> 
> Thanks in advance!
> 
> 
> 
> Derek Chu
-|-
Гена.

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 3.98.0, Release Candidate 1 now available for download

[Gena Bug]

On Fri November 16 2012 16:56:07 Sebastien Jourdain wrote:
> Hi Gena,
> 
> I'm not sure to understand your question about Custom Range and 1D plot ?
I mean that I can't find option 'Specify the Axis Range' in the View Settings 
of 
Line Chart View. I see this option in 3.12.0 and 3.14.1 versions but not in the 
new one.

> Seb
> 
> PS: You can ask the list for that ? I might not be the best person for that
> question... ;-)
Oops, hit the wrong key for the answear..

> On Fri, Nov 16, 2012 at 7:53 AM, Gena Bug  wrote:
> > On Fri November 16 2012 15:50:36 you wrote:
> > > Next week you will also find a "debian" special in the nightly download
> > > too.
> > 
> > Cool! I don't like compile :)
> > 
> > > Or if you can not wait you can download it from cdash here:
> > http://open.cdash.org/upload/7196820b319881c414eb102f1cb92b006cb1b400/Par
> > aV
> > 
> > > iew-3.98.0-RC2-Linux-64bit.tar.gz
> > 
> > I checked this version -- fonts looks nice again, thank you!
> > 
> > Now only one question left for me: how can I set custom axis' range on 1D
> > plots?
> > 
> > > Seb
> > > 
> > > On Fri, Nov 16, 2012 at 1:15 AM, Gena Bug  wrote:
> > > > On Thursday 15 November 2012 23:33:08 Utkarsh Ayachit wrote:
> > > > > Gena,
> > > > 
> > > > Hi, Utkarsh
> > > > 
> > > > > The fonts issue seem to be resolved on the nightly binaries. Can
> > > > > you give them a try?
> > > > > http://paraview.org/paraview/resources/software.php (pick
> > > > > 
> > > > >  "Nightly" in the Version combo-box).
> > > > 
> > > > Can't check because it built with glibc 2.14 but my system (debian
> > > > testing) has
> > > > 2.13:
> > > > $ ~/ParaView-3.98.0-RC2-Linux-64bit/bin/paraview
> > > > ~/ParaView-3.98.0-RC2-Linux-64bit/lib/paraview-3.98/paraview:
> > > > /lib/x86_64-linux-
> > > > gnu/libc.so.6: version `GLIBC_2.14' not found (required by
> > > > ~/ParaView-3.98.0-
> > > > 
> > > > RC2-Linux-64bit/lib/paraview-3.98/
> > 
> > libvtkpqApplicationComponents-pv3.98.so
> > 
> > > > .1) ...
> > > > 
> > > > Is all new versions of PV will be built with glibc 2.14?
> > > > 
> > > > > Utkarsh
> > > > > 
> > > > > On Sat, Nov 10, 2012 at 5:36 AM, Gena Bug 
> > 
> > wrote:
> > > > > > Oops, forgot about screenshot
> > > > > > 
> > > > > > On Friday 09 November 2012 22:34:02 Gena Bug wrote:
> > > > > > > Hi!
> > > > > > > 
> > > > > > > Thank you for your work! Properties tab is much more convenient
> > > > > > > now.
> > > > > > > 
> > > > > > > Some bugs or smth that I've noticed:
> > > > > > > 1. Fonts look awful on my Debian testing amd64 (screenshot is
> > > > 
> > > > attached)
> > > > 
> > > > > > > 2. After pressing 'Show' button in Color group the error
> > > > > > > appears
> > > > > > 
> > > > > > "Arguments
> > > > > > 
> > > > > > >  to pqLookupTableManager::setScalarBarVisibility cannot be
> > > > > > >  null"
> > 
> > if
> > 
> > > > no
> > > > 
> > > > > > > data were choosen, but button remains pressed
> > > > > > > 3. Can't reset view in Line Chart View after moving around with
> > > > 
> > > > mouse.
> > > > 
> > > > > > > In 3.14.1 I can reset view by turning off and on again one of
> > > > > > > an active
> > > > > > 
> > > > > > line,
> > > > > > 
> > > > > > > now it doesn't work.. Also, didn't find an option "Specify the
> > 
> > axis
> > 
> > > > > > > range".
> > > > > > > 
> > > > > > > -|-
> > > > > > > Гена.
> > > > > > > ___
> > > > > > > Powered by www.kitware.com
> > > > > > > 
> > > > > > > Visit other Kitware open-source pro

Re: [Paraview] ANN: ParaView 3.98.0, Release Candidate 1 now available for download

[Gena Bug]

On Thursday 15 November 2012 23:33:08 Utkarsh Ayachit wrote:
> Gena,
Hi, Utkarsh

> The fonts issue seem to be resolved on the nightly binaries. Can you give
> them a try? http://paraview.org/paraview/resources/software.php (pick
>  "Nightly" in the Version combo-box).
Can't check because it built with glibc 2.14 but my system (debian testing) has 
2.13:
$ ~/ParaView-3.98.0-RC2-Linux-64bit/bin/paraview
~/ParaView-3.98.0-RC2-Linux-64bit/lib/paraview-3.98/paraview: /lib/x86_64-linux-
gnu/libc.so.6: version `GLIBC_2.14' not found (required by ~/ParaView-3.98.0-
RC2-Linux-64bit/lib/paraview-3.98/libvtkpqApplicationComponents-pv3.98.so.1)
...

Is all new versions of PV will be built with glibc 2.14?
 
> Utkarsh
> 
> On Sat, Nov 10, 2012 at 5:36 AM, Gena Bug  wrote:
> > Oops, forgot about screenshot
> > 
> > On Friday 09 November 2012 22:34:02 Gena Bug wrote:
> > > Hi!
> > > 
> > > Thank you for your work! Properties tab is much more convenient now.
> > > 
> > > Some bugs or smth that I've noticed:
> > > 1. Fonts look awful on my Debian testing amd64 (screenshot is attached)
> > > 2. After pressing 'Show' button in Color group the error appears
> > 
> > "Arguments
> > 
> > >  to pqLookupTableManager::setScalarBarVisibility cannot be null" if no
> > > 
> > > data were choosen, but button remains pressed
> > > 3. Can't reset view in Line Chart View after moving around with mouse.
> > > In 3.14.1 I can reset view by turning off and on again one of an
> > > active
> > 
> > line,
> > 
> > > now it doesn't work.. Also, didn't find an option "Specify the axis
> > > range".
> > > 
> > > -|-
> > > Гена.
> > > ___
> > > Powered by www.kitware.com
> > > 
> > > Visit other Kitware open-source projects at
> > > http://www.kitware.com/opensource/opensource.html
> > > 
> > > Please keep messages on-topic and check the ParaView Wiki at:
> > > http://paraview.org/Wiki/ParaView
> > > 
> > > Follow this link to subscribe/unsubscribe:
> > > http://www.paraview.org/mailman/listinfo/paraview
> > 
> > ___
> > Powered by www.kitware.com
> > 
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > 
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > 
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Problem opening a pvd collection of pvtu files

[Gena Bug]

Hi,

Seems, you mixed folder' separator symbols in the paths:
> ERROR: In C:\DBD\pvs-x32\paraview\src\paraview\VTK\IO\XML\vtkXMLReader.cxx,
> line 219 vtkXMLPUnstructuredGridReader (0A04BBE8): Error opening file
> C:\AVLKiste\Cluster/Single_Simple_Cell/dickesmeshout0001.pvtu

-|-
Гена.

On Mon November 12 2012 11:43:04 Pichler, Franz wrote:
> Hello everybody,
> I have a problem opening a collection of pvtu/vtu files that I can open as
> a series (the *.00x.pvtu series). I have a pvd file that looks like this
> 
>  byte_order="LittleEndian">  group="" part="0" file="Single_Simple_Cell/dickesmeshout0001.pvtu"/>
>  file="Single_Simple_Cell/dickesmeshout0002.pvtu"/> 
>   
> -
> I also have the the pvtu and vtu file it relates to. I can open the vtu and
> pvtu files without problems. I can animate the frames when I open the pvtu
> series. I only need this pvd file to get the timesteps right. The pvtu
> file looks like this:
> -
> 
>   
> 
>format="appended"/> .
> 
>   
>  format="appended"/> 
> 
> 
>  .
>   
> 
> 
> -
> The the vtu file looks like this:
> 
> 
> 
>   
> 
>   
>  format="appended" offset="0"/> 
>   
>   
>   
>   
>  offset="7644"/> 
>   
>  offset="10912"/>  offset="13236"/>  offset="13572"/> 
> 
> .
> 
> 
> -
> When I try to open the pvd file I get the following:
> -
> 
> ERROR: In C:\DBD\pvs-x32\paraview\src\paraview\VTK\IO\XML\vtkXMLReader.cxx,
> line 219 vtkXMLPUnstructuredGridReader (0A04BBE8): Error opening file
> C:\AVLKiste\Cluster/Single_Simple_Cell/dickesmeshout0001.pvtu
> 
> 
> ERROR: In
> C:\DBD\pvs-x32\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExecutiv
> e.cxx, line 753 vtkCompositeDataPipeline (0EF1FD60): Algorithm
> vtkXMLPUnstructuredGridReader(0A04BBE8) returned failure for request:
> vtkInformation (0EFC0990) Debug: Off
>   Modified Time: 102749
>   Reference Count: 1
>   Registered Events: (none)
>   Request: REQUEST_INFORMATION
>   FORWARD_DIRECTION: 0
>   ALGORITHM_AFTER_FORWARD: 1
> 
> 
> 
> --
> 
> I have tried this with version 3.98.0-RC1-2-ge2fcf70 32bit on windows
> Itried the same on a linux machine version 3.14.1 64 bit And a windows
> version 3.14.0-rc2 and got similar error messages
> 
> NO idea if this is a bug but from what I understood this should work.
> Any hint is appreciated
> Thanks folks
> Byebye
> Best regards
> Franz Pichler
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 3.98.0, Release Candidate 1 now available for download

[Gena Bug]

On Saturday 10 November 2012 19:48:02 Sebastien Jourdain wrote:
> Hi Gena,
Hi Sebastien,

> I don't know about the font, but the point 2 is definitely a bug.
> Although, for 3, I think this is intended. If you want to Reset the
> display, you just need to click on the "Reset Camera" button that we
> usually use for 3D view.
Thanks for the tip -- never used this button before, not for 1D nor 3D..

> Thanks for your feedback,
> 
> Seb
> 
> On Fri, Nov 9, 2012 at 1:34 PM, Gena Bug  wrote:
> > Hi!
> > 
> > Thank you for your work! Properties tab is much more convenient now.
> > 
> > Some bugs or smth that I've noticed:
> > 1. Fonts look awful on my Debian testing amd64 (screenshot is attached)
> > 2. After pressing 'Show' button in Color group the error appears
> > "Arguments  to
> > pqLookupTableManager::setScalarBarVisibility cannot be null" if no data
> > were
> > choosen, but button remains pressed
> > 3. Can't reset view in Line Chart View after moving around with mouse. In
> > 3.14.1
> > I can reset view by turning off and on again one of an active line, now
> > it doesn't work.. Also, didn't find an option "Specify the axis range".
> > 
> > -|-
> > Гена.
> > ___
> > Powered by www.kitware.com
> > 
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > 
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > 
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 3.98.0, Release Candidate 1 now available for download

[Gena Bug]

Hi!

Thank you for your work! Properties tab is much more convenient now.

Some bugs or smth that I've noticed:
1. Fonts look awful on my Debian testing amd64 (screenshot is attached)
2. After pressing 'Show' button in Color group the error appears "Arguments  to 
pqLookupTableManager::setScalarBarVisibility cannot be null" if no data were 
choosen, but button remains pressed
3. Can't reset view in Line Chart View after moving around with mouse. In 
3.14.1 
I can reset view by turning off and on again one of an active line, now it 
doesn't work.. Also, didn't find an option "Specify the axis range".

-|-
Гена.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] cell vector data: glyphs?

[Gena Bug]

On Tuesday 09 October 2012 23:32:37 Nico Schlömer wrote:
> Hi,
Hi!

> when displaying the glyphs of a vector field that is defined in the
> points mesh, everything looks fine.
> However, if the vector field is *cell*-based, what's the correct way
> to produce the glyphs here?
> I put a minimalistic example with the field (1,1,1) defined in both
> points and cells at http://win.ua.ac.be/~nschloe/other/glyphs.vtu.
Filters->Common->CellDatatoPointData, then Glyph

> --Nico

-|-
Гена.

> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Screenshot sizes on pvbatch

[Gena Bug]

Hi!

You can also try this:
WriteImage('boo.png', Magnification = 2)

http://www.paraview.org/pipermail/paraview/2011-October/023106.html

-|-
Гена.

On Wed September 19 2012 19:43:26 Magician wrote:
> Hi all,
> 
> 
> I'm trying to save screenshots with pvbatch (v3.14.1).
> I set larger ViewSizes than display resolution,
> but exported images are cropped with the display.
> 
> Is there any ideas to export larger images than displays?
> # Fortunately without re-compiling ParaView.
> 
> 
> Magician
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] remove mesh partition

[Gena Bug]

Try CleantoGrid filter, it helps me with vtu-files.

-|-
Гена.

On Fri August 31 2012 18:43:50 hadrien calmet wrote:
> Hi everybody
> 
> The output of my parallel cfd code is in Hdf5 and Xdmf.
> My problem is that paraview displays the mesh partitions.
> I want to remove it to just see the computation domain.
> I put a picture, it is better to understand my problem.
> the computational domain is a cube and I use 3 processors (so 2 slaves
> -> 2 partitions)
> 
> There is a solution with paraview to remove the mesh partition ?
> like a filter ?
> or I have to modify the hdf5 implementation ?
> 
> thank you very much
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] Problem with 1D plotting on pyramidal mesh

[Gena Bug]

Hi!

I've noticed a bug in the last version of Paraview (3.14.1) on Debian testing 
amd64. Plot 
over line in pyramidal mesh doesn't show me the lines (I've checked versions 
3.8 and 3.12 -- 
they're both worked as expected).

I created a bug #13238 with an example file. It's a simple pyramidal mesh in a 
flat 
quadratic region. Try to create a 1D plot over X-axis ({0.0,3.0}, 1.5, 0.0) and 
you will see 
the problem.

-|-
Gena.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] MPI Socket in use

[Gena Bug]

Hi!

Some time ago I tried to built ParaView with MPI and noticed that even if 
variables 
MPI_{CXX,C}_COMPILER pointed to the right compilers (mpicxx and mpicc 
respectively), the 
compilers from CMAKE_{CXX,C}_COMPILER variables were used (g++ and gcc).

Try turning on CMAKE_VERBOSE_MAKEFILE and look what exactly happens.

P.S. What is the difference between MPI_{CXX,C}_COMPILER and 
CMAKE_{CXX,C}_COMPILER 
variables?

On Tue April 17 2012 08:26:37 Adam Dershowitz, Ph.D., P.E. wrote:
> I am sure that I use ccmake and changed PARAVIEW_USE_MPI to ON, (I also
> enabled python and pointed to the open mpi compiler, so that it then
> filled in most of the variables for MPI, as the note explains).  Then I
> did configure and generate.  Finally I did make, and sudo make install. 
> All seemed to work fine, and paraview runs fine, with a single processor.
> I even went so far and to make a new, empty directory, and rebuilt it
> there.  With the same results. I have also tried to explicitly put in the
> correct path, just to make sure that there isn't some other pvserver
> around: mpirun -np 3 /home/dersh/projects/ParaView-bin/bin/pvserver
> with exactly the same results.
> I have gone back, and now I see that MPIEXEC_MAX_NUMPROCS and
> VTK_MPI_MAX_NUMPROCS are set to 2.  But, I get the same error if I try to
> run it with -np 2, so clearly just using MPI is failing.  A
> 
> I realized that the problem is consistent with it not being built with MPI,
> but I definitely set it on.  Are there some other variables that have to
> be set?  Clearly something is not being built correctly, but I am not sure
> what it is.
> 
> Thanks,
> 
> --Adam
> 
> On Apr 16, 2012, at 7:09 PM, Utkarsh Ayachit wrote:
> > You may want to verify PARAVIEW_USE_MPI flag again and ensure that the
> > pvserver you're running is indeed the one that has PARAVIEW_USE_MPI
> > set to ON. The problem you're seeing is typical when ParaView not
> > built with MPI.
> > 
> > Utkarsh
> > 
> > On Mon, Apr 16, 2012 at 8:10 PM, Adam Dershowitz
> > 
> >  wrote:
> >> I just built paraview on an opensuse linux box.  When I use the GUI, and
> >> a single connection it seems to work fine.  But, if I try to use
> >> multiple CPUs, or run with mpi, it fails.
> >> I do have OpenMPI installed.
> >> When I first started getting the error, I googled around some and found
> >> that maybe "make install" would help (I had been running it just in the
> >> build directory).  But I am getting the same error after installing.  I
> >> also added my openmpi libraries to LD_LIBRARY_PATH (when I first tried
> >> to run it I had other errors about a shared library).
> >> 
> >> I did build with PARAVIEW_USE_MPI set to on.  It looks as though one
> >> pvserver will run, but any additional ones finds a port in use.  Clearly
> >> something is not right about how MPI is being handled, but I am not sure
> >> how to fix it.
> >> 
> >> 
> >> If I try mpirun, here is error I get:
> >> 
> >> 
> >> mpiexec -np 3  pvserver
> >> Waiting for client...
> >> Connection URL: cs://cfd:1
> >> Accepting connection(s): cfd:1
> >> Waiting for client...
> >> Connection URL: cs://cfd:1
> >> ERROR: In
> >> /home/dersh/projects/ParaView-3.14.1-Source/VTK/Common/vtkSocket.cxx,
> >> line 206
> >> vtkServerSocket (0xebd970): Socket error in call to bind. Address
> >> already in use.
> >> 
> >> ERROR: In
> >> /home/dersh/projects/ParaView-3.14.1-Source/ParaViewCore/ClientServerCor
> >> e/vtkTCPNetworkAccessManager.cxx, line 343
> >> vtkTCPNetworkAccessManager (0x661800): Failed to set up server socket.
> >> 
> >> Exiting...
> >> Waiting for client...
> >> Connection URL: cs://cfd:1
> >> ERROR: In
> >> /home/dersh/projects/ParaView-3.14.1-Source/VTK/Common/vtkSocket.cxx,
> >> line 206
> >> vtkServerSocket (0xebd970): Socket error in call to bind. Address
> >> already in use.
> >> 
> >> ERROR: In
> >> /home/dersh/projects/ParaView-3.14.1-Source/ParaViewCore/ClientServerCor
> >> e/vtkTCPNetworkAccessManager.cxx, line 343
> >> vtkTCPNetworkAccessManager (0x661800): Failed to set up server socket.
> >> 
> >> Exiting...
> >> 
> >> - It seems that [at least] one of the processes that was started
> >> with mpirun did not invoke MPI_INIT before quitting (it is possible
> >> that more than one process did not invoke MPI_INIT -- mpirun was only
> >> notified of the first one, which was on node n0).
> >> 
> >> mpirun can *only* be used with MPI programs (i.e., programs that
> >> invoke MPI_INIT and MPI_FINALIZE).  You can use the "lamexec" program
> >> to run non-MPI programs over the lambooted nodes.
> >> 
> >> - mpirun failed with exit status 252
> >> 
> >> And suggestions would be greatly appreciated.
> >> 
> >> thanks,
> >> 
> >> --Adam
> >> 
> >> 
> >> ___
> >> Powered by www.kitware.com
> >> 
> >> Visit other 

Re: [Paraview] PV 3.14 Linux crashes when trying to open a file

[Gena Bug]

On Thursday 23 February 2012 14:04:53 Richard GRENON wrote:
> Richard GRENON a écrit :
> > PV 3.14 can be launched on Linux 64 bits CentOS 5.7, but it crashes
> > when I select either the "Open" item or the "Load state" item in the
> > "File" menu!
> 
> Hello.
> 
> I just want to add that both 32 bit and 64 bit versions of PV 3.14 crash
> when trying to open a file.
> Not yet checked the Windows version.
> 
> best regards.
Can't reproduce this on Debian testing amd64... Try launch PV from a terminal 
and look at message after it crash.

-|-
Gena.

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ANN: ParaView 3.14, Release Candidate 2 Available

[Gena Bug]

Hi!

On Fri February 10 2012 01:26:03 Utkarsh Ayachit wrote:
> ...
> To make it easier to deal with a large number of views at the same
> time, ParaView now supports creating multiple tabs for placing views.
> This enables rapid switching of views laid out on a tile-display by
> simply switching the active tab. More information:
> http://paraview.org/Wiki/ParaView/Displaying_Data#Multiple_Views.
> ...
Is it possible to hide tab bar? I think that show it only when needed (when 
more than one 
tab is open) will be a good solution for those who works only with one tab 
(like me) and 
those who wants more.

-|-
Gena.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] 3.14 RC2, display tab mismatch selected data in the pipeline

[Gena Bug]

Hi!

I've noticed that clicking on 'eye' (make data visible) also selects data in 
the pipeline 
but doesn't update tabs (properties, display and info).

Steps to reproduce:
1. open any data
2. clip it for example (in that case original data become invisible)
3. click on 'eye' to make original data visible (this action will also select 
data in the 
pipeline)
4. see the props, display and info tab -- they still contain data of previous 
selected data.

P.S. Debian testing amd64, ParaView 3.14 RC2 installed from binaries from the 
site.

-|-
Gena.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Do anyone have examples of writing binary file with mesh and results data?

[Gena Bug]

On Friday 13 January 2012 06:11:13 Zupan Hu wrote:
> Hi All,
> 
> Currently I am learning how to do parallel visualization with ParaView, and
> I need to generate ParaView readable binary file instead of VTK.
> 
>  I can generate VTK file in Matlab with 3d Mesh (nodes and element connect)
> and results data (say temperature at each node). But I have trouble with
> generating a ParaView binary file with the same 3d mesh and results data.
> 
> Did anyone use Matlab (or under other environment like C) to generate the
> binary file? Do you have any example programs for generating such binary
> files?
I made a C/C++ code to write VTK Unstructured (vtu) binary files: custom C-
frontend for ZLib and C++ for the rest of the code. I'd also experimented with 
C++ ZLib frontend (gzstream) but without luck...

If you want I can send you the code out of the list (my project is source-
closed).

P.S. I should mention one person who helped me to write this code: Sébastien 
Blaise 

> Thanks
> Zupan

-|-
Гена.


___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] ParaView 3.12 Webinar Tomorrow

[Gena Bug]

Hi!

When are you going to post a record of the webinar?

-|-
Gena.

On Friday 11 November 2011 01:49:40 Lisa Avila wrote:
> Please join us tomorrow at 12:30pm EST for a webinar covering the new
> ParaView 3.12 release. In this 15-minute webinar we'll have a brief
> demo showing the updates since 3.10 and give a sneak peek into what's
> in store for the next release.
> 
> To join, please register at:
> https://www3.gotomeeting.com/register/183922974.
> 
> Note that GoToWebinar requires either Windows or Mac. We will post a
> recording of the session within a few days for those unable to attend.
> ___
> Powered by www.kitware.com
> 
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> 
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> 
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] PV 3.12.0 unable to save screenshot as a PNG file

[Gena Bug]

On Friday 11 November 2011 08:47:22 David Partyka wrote:
> Hi Richard and Gena, I have made a few more adjustments and regenerated the
> binaries, please try them again at your convenience. Thanks!
Hi David.

With new binaries all (saving png-screenshot and python shell) works! Thank you!
 
> On Thu, Nov 10, 2011 at 8:36 AM, David Partyka 
wrote:
> > Looking into this now.
> > 
> > On Thu, Nov 10, 2011 at 4:14 AM, Richard GRENON 
wrote:
> >> Hi again.
> >> 
> >> I confirm the bad news of Gena Bug: I get an error when opening the
> >> Python shell with the new Linux 64 bits binaries. Following is the error
> >> 
> >> message:
> >>  Python 2.7.2 (default, Nov 9 2011, 15:37:53)
> >>  
> >>> [GCC 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)] on linux2
> >>> 
> >>> >>> from paraview.simple import *
> >>> 
> >>> Traceback (most recent call last):
> >>> 
> >>> File "", line 4, in 
> >>> 
> >>> File "/tmp_user/eos022z/grenon/**ParaView-3.12.0-Linux-x86_64/**
> >>> lib/paraview-3.12/site-**packages/paraview/**servermanager.py", line
> >>> 43, in 
> >>> 
> >>> 
> >>> import paraview, re, os, os.path, new, sys, vtk
> >>> 
> >>> File "/tmp_user/eos022z/grenon/**ParaView-3.12.0-Linux-x86_64/**
> >>> lib/paraview-3.12/site-**packages/paraview/vtk/__init__**.py", line 1,
> >>> in 
> >>> 
> >>> 
> >>> from vtkCommonPython import *
> >>> 
> >>> ImportError: No module named vtkCommonPython
> >>> 
> >>>  Richard
> >> 
> >> Gena Bug a écrit :
> >>  Hi everybody!
> >>  
> >>> I've just redownloaded Linux x86_68 binaries and tested it.
> >>> Good news: now I'm able to save PNG screenshots.
> >>> Bad news: now I can't use python shell and scripts: it fails when
> >>> import from paraview.simple. Here is a message that occurs just after
> >>> opening
> >>> 
> >>> Python Shell:
> >>>  Python 2.7.2 (default, Nov  9 2011, 15:37:53)   [GCC 4.1.2 20061115
> >>> 
> >>> (prerelease) (Debian 4.1.1-21)] on linux2
> >>> 
> >>>  >>> from paraview.simple import *
> >>>  
> >>>  Traceback (most recent call last):
> >>>File "", line 4, in 
> >>>File
> >>>"/home/gennadiy/ParaView-3.12.**0-Linux-x86_64/lib/paraview-3.**
> >>> 
> >>> 12/site-
> >>> packages/paraview/**servermanager.py", line 43, in 
> >>> 
> >>>import paraview, re, os, os.path, new, sys, vtk
> >>>File
> >>>"/home/gennadiy/ParaView-3.12.**0-Linux-x86_64/lib/paraview-3.**
> >>> 
> >>> 12/site-
> >>> packages/paraview/vtk/__init__**.py", line 1, in 
> >>> 
> >>>from vtkCommonPython import *
> >>>  
> >>>  ImportError: No module named vtkCommonPython
> >>> 
> >>> -|-
> >>> Gena.
> >>> 
> >>> On Thu November 10 2011 04:11:22 David Partyka wrote:
> >>>> Hi All, we detected and corrected an issue in the binary build process
> >>>> and
> >>>> regenerated and tested the Linux 32bit/64bit binaries for this issue.
> >>>> Please redownload them and try again. Thank you for your patience.
> >>>> 
> >>>> On Wed, Nov 9, 2011 at 8:29 AM, mirko heuegger 
> >>>> 
> >>>> wrote:
> >>>>> Hello!
> >>>>> 
> >>>>> On Wed, Nov 9, 2011 at 2:15 PM, Richard GRENON <
> >>>>> richard.gre...@onera.fr>
> >>>>> 
> >>>>> wrote:
> >>>>>> Thank you, Dave.
> >>>>>> I will check the Windows version this evening.
> >>>>> 
> >>>>> Under Windows XP (64bit and normal version), it works.
> >>>>> 
> >>>>> Sincerely
> >>>>> 
> >>>>> mirko
> >>>>> 
> >>>>> --
> >>>>> Real programmers don't document; if it was
> >>>>> hard to write, it should be hard to understand.
> >> 
> >> --
> >> Richard GRENON
> >> ONERA
> >> Departement d'Aerodynamique Appliquee - DAAP/ACI
> >> 8 rue des Vertugadins
> >> 92190 MEUDON - FRANCE
> >> phone : +33 1 46 73 42 17
> >> fax   : +33 1 46 73 41 46
> >> mailto:richard.gre...@onera.fr
> >> http://www.onera.fr

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] PV 3.12.0 unable to save screenshot as a PNG file

[Gena Bug]

Hi everybody!

I've just redownloaded Linux x86_68 binaries and tested it.
Good news: now I'm able to save PNG screenshots.
Bad news: now I can't use python shell and scripts: it fails when import from 
paraview.simple. Here is a message that occurs just after opening Python Shell:
  Python 2.7.2 (default, Nov  9 2011, 15:37:53) 
  [GCC 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)] on linux2
  >>> from paraview.simple import *
  Traceback (most recent call last):
File "", line 4, in 
File "/home/gennadiy/ParaView-3.12.0-Linux-x86_64/lib/paraview-3.12/site-
packages/paraview/servermanager.py", line 43, in 
import paraview, re, os, os.path, new, sys, vtk
File "/home/gennadiy/ParaView-3.12.0-Linux-x86_64/lib/paraview-3.12/site-
packages/paraview/vtk/__init__.py", line 1, in 
from vtkCommonPython import *
  ImportError: No module named vtkCommonPython

-|-
Gena.

On Thu November 10 2011 04:11:22 David Partyka wrote:
> Hi All, we detected and corrected an issue in the binary build process and
> regenerated and tested the Linux 32bit/64bit binaries for this issue.
> Please redownload them and try again. Thank you for your patience.
> 
> On Wed, Nov 9, 2011 at 8:29 AM, mirko heuegger  wrote:
> > Hello!
> > 
> > On Wed, Nov 9, 2011 at 2:15 PM, Richard GRENON 
> > 
> > wrote:
> > > Thank you, Dave.
> > > I will check the Windows version this evening.
> > 
> > Under Windows XP (64bit and normal version), it works.
> > 
> > Sincerely
> > 
> > mirko
> > 
> > --
> > Real programmers don't document; if it was
> > hard to write, it should be hard to understand.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Unable to write PNG file in RC3

[Gena Bug]

Hello!

I still can't take a screenshot, even from 3.12.0. The same error occurs:

libpng warning: Application was compiled with png.h from libpng-1.5.5
libpng warning: Application  is  running with png.c from libpng-1.2.46
libpng error: Incompatible libpng version in application and library
ERROR: In /home/kitware/Dashboards/MyTests/ParaView-
master/VTK/IO/vtkPNGWriter.cxx, line 199
vtkPNGWriter (0x4107070): Unable to write PNG file!

Output of run 'paraview --ldd' attached. There're two lines with libpng:
...
123 libpng12.so.0 => /lib/x86_64-linux-gnu/libpng12.so.0 (0x7fe481c0b000)
...
141 libpng15.so.15 => /home/gennadiy/ParaView-3.12.0-Linux-
x86_64/lib/paraview-3.12/libpng15.so.15 (0x7fe47e379000)
...

My platform is Debian testing amd64. Paraview binaries for Linux-x86_64 were 
downloaded from www.paraview.org

-|-
Gena.

On Tuesday 01 November 2011 17:59:35 David Partyka wrote:
> Hi Gena, if you take the contents of ./lib/paraview-3.12/lib/ and put
> it in ./lib/paraview-3.12/
> does everything work? This is a packaging bug that I will take care of in
> short order.
> 
> On Tue, Nov 1, 2011 at 9:53 AM, Gena Bug  wrote:
> > On Tue November 1 2011 17:20:26 Utkarsh Ayachit wrote:
> > > I;m assuming you're using the ParaView binaries distributed from
> > > paraview.org?
> > 
> > Yes, I'd downloaded binaries from paraview.org
> > 
> > > Dave, is the package missing libpng?
> > > 
> > > Utkarsh
> > > 
> > > On Tue, Nov 1, 2011 at 7:40 AM, Gena Bug  wrote:
> > > > Hello!
> > > > 
> > > > After updating paraview from 3.12RC2 to 3.12RC3 I can't save any
> > > > screenshots! This is the application' output:
> > > > 
> > > > libpng warning: Application was compiled with png.h from libpng-1.5.5
> > > > libpng warning: Application  is  running with png.c from
> > > > libpng-1.2.46 libpng error: Incompatible libpng version in
> > > > application and library ERROR: In
> > 
> > /home/kitware/Dashboards/MyTests/ParaView-master/VTK/IO/vtkPNGWriter.cxx
> > 
> > > > , line 199 vtkPNGWriter (0x85cef0): Unable to write PNG file!
> > > > 
> > > > My platform is Debian testing amd64. Package libpng12-0 has 1.2.46-3
> > > > version number.
> > > > 
> > > > -|-
> > > > Gena.
> > > > ___
> > > > Powered by www.kitware.com
> > > > 
> > > > Visit other Kitware open-source projects at
> > > > http://www.kitware.com/opensource/opensource.html
> > > > 
> > > > Please keep messages on-topic and check the ParaView Wiki at:
> > > > http://paraview.org/Wiki/ParaView
> > > > 
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://www.paraview.org/mailman/listinfo/paraview



paraview-3120-ldd.txt.gz
Description: GNU Zip compressed data
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] OpenDataFile doesn't work in RC2

[Gena Bug]

Hello!

I tried to open a file from python shell in 3.12.0RC2 and got this message:
vtr = OpenDataFile('tmp.vtr')
Traceback (most recent call last):
  File "", line 1, in 
  File "/home/gennadiy/ParaView-3.12.0-RC2-Linux-x86_64/lib/paraview-3.12/site-
packages/paraview/simple.py", line 136, in OpenDataFile
reader = globals()[xml_name](FileName=filename, **extraArgs)
KeyError: 'XMLRectilinearGridReader'

The more explicit expression works fine:
vtr = XMLRectilinearGridReader(FileName = 'tmp.vtr')

In 3.10.1 it works both methods works as expected.

-|-
Gena.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Interpolate data from an unstructured mesh to a structured one

[Gena Bug]

Thank you very much -- you've saved me a lot of time!

One question about wavelet source -- can I generate rectilinear mesh with, for 
example, 
100x100x100 elements in [0, 1]x[0, 1]x[0, 1] extent?

-|-
Gena.

On Tue November 1 2011 17:21:11 David E DeMarle wrote:
> Or just use the wavelet source to make the image data to sample onto.
> 
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
> 
> 
> 
> On Tue, Nov 1, 2011 at 9:07 AM, Sebastien Jourdain
> 
>  wrote:
> > Hi Gena,
> > 
> > you can also use "Resample with dataset". The only missing part will
> > be your destination dataset that you want to use for sampling your
> > original data.
> > You can look at that documentation to create an empty one manually by
> > creating a legacy VTK file.
> > http://www.vtk.org/VTK/img/file-formats.pdf
> > I've paste the content of a rectilinear one below. You will just need
> > to tweak some parameters.
> > 
> > Seb
> > 
> > = Your sampling dataset could look like that file: probe.vtk =
> > 
> > # vtk DataFile Version 3.0
> > vtk output
> > ASCII
> > DATASET STRUCTURED_POINTS
> > DIMENSIONS 11 11 11
> > SPACING 0.004 0.004 0.012
> > ORIGIN -0.02 -0.02 -0.06
> > 
> > On Tue, Nov 1, 2011 at 3:57 AM, Gena Bug  wrote:
> >> Hello, Robert!
> >> 
> >> Thank you for quick response! Seems, this plugin is what I'm looking
> >> for. But can you explain me how can I compile it? I can't find any
> >> readme in the repository and I don't have enough experience with
> >> building paraview plugins. My platform is Debian testing amd64.
> >> 
> >> -|-
> >> Gena.
> >> 
> >> On Mon October 31 2011 19:54:25 Robert Maynard wrote:
> >>> You might be interested in the code at:
> >>> https://github.com/berkgeveci/ComparativeVis
> >>> 
> >>> It has a filter called Cross Mesh Field Evaluation which maps a
> >>> property from a unstructured mesh
> >>> onto a structured mesh in parallel.
> >>> 
> >>> On Mon, Oct 31, 2011 at 10:48 AM, Gena Bug  wrote:
> >>> > Hello!
> >>> > 
> >>> > I have an interesting task -- I need to move the cell data from an
> >>> > unstructured mesh to corresponding cartesian mesh. Original domain is
> >>> > an alpha-degree 3D sector (alpha is a parameter, sector' angle, may
> >>> > be pi/3, pi/4, ...) with periodic side boundaries and unstructured
> >>> > discretization (hexahedral and wedge cells). The target domain is a
> >>> > cube that contains the whole cylinder (sum of N sectors: N*alpha =
> >>> > 2*pi). And my task is to generate cartezian mesh in the target
> >>> > domain (cube) and interpolate data from the original mesh to the
> >>> > cartezian.
> >>> > 
> >>> > I'm almost sure about answer, but I must ask: is there a combination
> >>> > of filters that can do the trick?
> >>> > 
> >>> > I think to write a python script that can do this, but I don't know
> >>> > how to: a) create a cartezian mesh and
> >>> > b) iterate throw mesh cells and their nodes.
> >>> > 
> >>> > |-
> >>> > Gena.
> >>> > ___
> >>> > Powered by www.kitware.com
> >>> > 
> >>> > Visit other Kitware open-source projects at
> >>> > http://www.kitware.com/opensource/opensource.html
> >>> > 
> >>> > Please keep messages on-topic and check the ParaView Wiki at:
> >>> > http://paraview.org/Wiki/ParaView
> >>> > 
> >>> > Follow this link to subscribe/unsubscribe:
> >>> > http://www.paraview.org/mailman/listinfo/paraview
> >> 
> >> ___
> >> Powered by www.kitware.com
> >> 
> >> Visit other Kitware open-source projects at
> >> http://www.kitware.com/opensource/opensource.html
> >> 
> >> Please keep messages on-topic and check the ParaView Wiki at:
> >> http://paraview.org/Wiki/ParaView
> >> 
> >> Follow this link to subscribe/unsubscribe:
> >> http://www.paraview.org/mailman/listinfo/paraview
> > 
> > ___
> > Powered by www.kitware.com
> > 
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > 
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > 
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Unable to write PNG file in RC3

[Gena Bug]

On Tuesday 01 November 2011 17:59:35 David Partyka wrote:
> Hi Gena, if you take the contents of ./lib/paraview-3.12/lib/ and put
> it in ./lib/paraview-3.12/
> does everything work? This is a packaging bug that I will take care of in
> short order.
Hi David!

No, this trick doesn't work -- the same message appears.
 
> On Tue, Nov 1, 2011 at 9:53 AM, Gena Bug  wrote:
> > On Tue November 1 2011 17:20:26 Utkarsh Ayachit wrote:
> > > I;m assuming you're using the ParaView binaries distributed from
> > > paraview.org?
> > 
> > Yes, I'd downloaded binaries from paraview.org
> > 
> > > Dave, is the package missing libpng?
> > > 
> > > Utkarsh
> > > 
> > > On Tue, Nov 1, 2011 at 7:40 AM, Gena Bug  wrote:
> > > > Hello!
> > > > 
> > > > After updating paraview from 3.12RC2 to 3.12RC3 I can't save any
> > > > screenshots! This is the application' output:
> > > > 
> > > > libpng warning: Application was compiled with png.h from libpng-1.5.5
> > > > libpng warning: Application  is  running with png.c from
> > > > libpng-1.2.46 libpng error: Incompatible libpng version in
> > > > application and library ERROR: In
> > 
> > /home/kitware/Dashboards/MyTests/ParaView-master/VTK/IO/vtkPNGWriter.cxx
> > 
> > > > , line 199 vtkPNGWriter (0x85cef0): Unable to write PNG file!
> > > > 
> > > > My platform is Debian testing amd64. Package libpng12-0 has 1.2.46-3
> > > > version number.
> > > > 
> > > > -|-
> > > > Gena.
> > > > ___
> > > > Powered by www.kitware.com
> > > > 
> > > > Visit other Kitware open-source projects at
> > > > http://www.kitware.com/opensource/opensource.html
> > > > 
> > > > Please keep messages on-topic and check the ParaView Wiki at:
> > > > http://paraview.org/Wiki/ParaView
> > > > 
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://www.paraview.org/mailman/listinfo/paraview

___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Unable to write PNG file in RC3

[Gena Bug]

On Tue November 1 2011 17:20:26 Utkarsh Ayachit wrote:
> I;m assuming you're using the ParaView binaries distributed from
> paraview.org?
Yes, I'd downloaded binaries from paraview.org

> Dave, is the package missing libpng?
> 
> Utkarsh
> 
> On Tue, Nov 1, 2011 at 7:40 AM, Gena Bug  wrote:
> > Hello!
> > 
> > After updating paraview from 3.12RC2 to 3.12RC3 I can't save any
> > screenshots! This is the application' output:
> > 
> > libpng warning: Application was compiled with png.h from libpng-1.5.5
> > libpng warning: Application  is  running with png.c from libpng-1.2.46
> > libpng error: Incompatible libpng version in application and library
> > ERROR: In
> > /home/kitware/Dashboards/MyTests/ParaView-master/VTK/IO/vtkPNGWriter.cxx
> > , line 199 vtkPNGWriter (0x85cef0): Unable to write PNG file!
> > 
> > My platform is Debian testing amd64. Package libpng12-0 has 1.2.46-3
> > version number.
> > 
> > -|-
> > Gena.
> > ___
> > Powered by www.kitware.com
> > 
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > 
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > 
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] Unable to write PNG file in RC3

[Gena Bug]

Hello!

After updating paraview from 3.12RC2 to 3.12RC3 I can't save any screenshots! 
This is the 
application' output:

libpng warning: Application was compiled with png.h from libpng-1.5.5
libpng warning: Application  is  running with png.c from libpng-1.2.46
libpng error: Incompatible libpng version in application and library
ERROR: In 
/home/kitware/Dashboards/MyTests/ParaView-master/VTK/IO/vtkPNGWriter.cxx, line 
199
vtkPNGWriter (0x85cef0): Unable to write PNG file!

My platform is Debian testing amd64. Package libpng12-0 has 1.2.46-3 version 
number. 

-|-
Gena.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

Re: [Paraview] Interpolate data from an unstructured mesh to a structured one

[Gena Bug]

Hello, Robert!

Thank you for quick response! Seems, this plugin is what I'm looking for. But 
can you 
explain me how can I compile it? I can't find any readme in the repository and 
I don't have 
enough experience with building paraview plugins. My platform is Debian testing 
amd64.

-|-
Gena.

On Mon October 31 2011 19:54:25 Robert Maynard wrote:
> You might be interested in the code at:
> https://github.com/berkgeveci/ComparativeVis
> 
> It has a filter called Cross Mesh Field Evaluation which maps a
> property from a unstructured mesh
> onto a structured mesh in parallel.
> 
> On Mon, Oct 31, 2011 at 10:48 AM, Gena Bug  wrote:
> > Hello!
> > 
> > I have an interesting task -- I need to move the cell data from an
> > unstructured mesh to corresponding cartesian mesh. Original domain is an
> > alpha-degree 3D sector (alpha is a parameter, sector' angle, may be
> > pi/3, pi/4, ...) with periodic side boundaries and unstructured
> > discretization (hexahedral and wedge cells). The target domain is a cube
> > that contains the whole cylinder (sum of N sectors: N*alpha = 2*pi). And
> > my task is to generate cartezian mesh in the target domain (cube) and
> > interpolate data from the original mesh to the cartezian.
> > 
> > I'm almost sure about answer, but I must ask: is there a combination of
> > filters that can do the trick?
> > 
> > I think to write a python script that can do this, but I don't know how
> > to: a) create a cartezian mesh and
> > b) iterate throw mesh cells and their nodes.
> > 
> > |-
> > Gena.
> > ___
> > Powered by www.kitware.com
> > 
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > 
> > Please keep messages on-topic and check the ParaView Wiki at:
> > http://paraview.org/Wiki/ParaView
> > 
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

[Paraview] Interpolate data from an unstructured mesh to a structured one

[Gena Bug]

Hello!

I have an interesting task -- I need to move the cell data from an unstructured 
mesh to 
corresponding cartesian mesh. Original domain is an alpha-degree 3D sector 
(alpha is a 
parameter, sector' angle, may be pi/3, pi/4, ...) with periodic side boundaries 
and 
unstructured discretization (hexahedral and wedge cells). The target domain is 
a cube that 
contains the whole cylinder (sum of N sectors: N*alpha = 2*pi). And my task is 
to generate 
cartezian mesh in the target domain (cube) and interpolate data from the 
original mesh to 
the cartezian.

I'm almost sure about answer, but I must ask: is there a combination of filters 
that can do 
the trick?

I think to write a python script that can do this, but I don't know how to:
a) create a cartezian mesh and
b) iterate throw mesh cells and their nodes.

|-
Gena.
___
Powered by www.kitware.com

Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: 
http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview