Re: [Paraview] failed to launch paraview.exe
Hi David and Utkarsh, With your new patch on Python _DEBUG from git source, I was able to build on MSVC2010 without any PYTHON related hitches. I still have issues with VTK_WRAP_PYTHON_SIP as I reported earlier though. When I launched the newly built paraview.exe I got the exact same error in pqApplicationCore.cxx, line 725: vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConfigurationXML( config_file.toStdString().c_str()); QString config_file has value C:/ParaViewGit_VS2010/bin/Debug/../.plugins. However, config_file.toStdString() has corrupted content. BTW, shall I care about DirectX_LIBRARY? It appears ParaView's vtkRendering only uses DirectX9. Does including DirectX help ParaView performance on Windows machine? Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.comhttp://www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered
Re: [Paraview] failed to launch paraview.exe
Xulei, Just to be sure you are using Qt that was built with the same compilter right? Utkarsh On Fri, Feb 18, 2011 at 9:48 AM, Xunlei Wu xun...@renci.org wrote: Hi David and Utkarsh, With your new patch on Python _DEBUG from git source, I was able to build on MSVC2010 without any PYTHON related hitches. I still have issues with VTK_WRAP_PYTHON_SIP as I reported earlier though. When I launched the newly built paraview.exe I got the exact same error in pqApplicationCore.cxx, line 725: vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConfigurationXML( config_file.toStdString().c_str()); QString config_file has value C:/ParaViewGit_VS2010/bin/Debug/../.plugins. However, config_file.toStdString() has corrupted content. BTW, shall I care about DirectX_LIBRARY? It appears ParaView’s vtkRendering only uses DirectX9. Does including DirectX help ParaView performance on Windows machine? Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source
Re: [Paraview] failed to launch paraview.exe
Hi Utkarsh, It is the same setup with my MSVC2008 ParaView, where Qt is a prebuild release with MSVC2008 from http://code.google.com/p/qt-msvc-installer/downloads/list Very good catch!!! Does that mean I should either rebuild Qt with MSVC2010 or let ParaView build Qt along the way? Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Friday, February 18, 2011 10:25 AM To: Xunlei Wu Cc: David Partyka; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Xulei, Just to be sure you are using Qt that was built with the same compilter right? Utkarsh On Fri, Feb 18, 2011 at 9:48 AM, Xunlei Wu xun...@renci.org wrote: Hi David and Utkarsh, With your new patch on Python _DEBUG from git source, I was able to build on MSVC2010 without any PYTHON related hitches. I still have issues with VTK_WRAP_PYTHON_SIP as I reported earlier though. When I launched the newly built paraview.exe I got the exact same error in pqApplicationCore.cxx, line 725: vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); QString config_file has value C:/ParaViewGit_VS2010/bin/Debug/../.plugins. However, config_file.toStdString() has corrupted content. BTW, shall I care about DirectX_LIBRARY? It appears ParaView's vtkRendering only uses DirectX9. Does including DirectX help ParaView performance on Windows machine? Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXM L( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginCo nf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes
Re: [Paraview] failed to launch paraview.exe
Thanks a lot, David and Utkarsh. I was obnoxious about Qt aspect totally. By using this thread, can you comment on using DirectX with Paraview on Windows? Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Friday, February 18, 2011 10:54 AM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe You should using matching compilers for both ParaView and Qt especially if one is built debug and the other release. Unfortunately ParaView does not build Qt for you. On Fri, Feb 18, 2011 at 10:45 AM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, It is the same setup with my MSVC2008 ParaView, where Qt is a prebuild release with MSVC2008 from http://code.google.com/p/qt-msvc-installer/downloads/list Very good catch!!! Does that mean I should either rebuild Qt with MSVC2010 or let ParaView build Qt along the way? Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com] Sent: Friday, February 18, 2011 10:25 AM To: Xunlei Wu Cc: David Partyka; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Xulei, Just to be sure you are using Qt that was built with the same compilter right? Utkarsh On Fri, Feb 18, 2011 at 9:48 AM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi David and Utkarsh, With your new patch on Python _DEBUG from git source, I was able to build on MSVC2010 without any PYTHON related hitches. I still have issues with VTK_WRAP_PYTHON_SIP as I reported earlier though. When I launched the newly built paraview.exe I got the exact same error in pqApplicationCore.cxx, line 725: vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); QString config_file has value C:/ParaViewGit_VS2010/bin/Debug/../.plugins. However, config_file.toStdString() has corrupted content. BTW, shall I care about DirectX_LIBRARY? It appears ParaView's vtkRendering only uses DirectX9. Does including DirectX help ParaView performance on Windows machine? Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool
Re: [Paraview] failed to launch paraview.exe
It isn't required but is used to do some hardware support queries. Are you getting compile/configure errors complaining about not finding some part of DirectX? On Fri, Feb 18, 2011 at 10:57 AM, Xunlei Wu xun...@renci.org wrote: Thanks a lot, David and Utkarsh. I was obnoxious about Qt aspect totally. By using this thread, can you comment on using DirectX with Paraview on Windows? Best, x *From:* David Partyka [mailto:david.part...@kitware.com] *Sent:* Friday, February 18, 2011 10:54 AM *To:* Xunlei Wu *Cc:* Utkarsh Ayachit; paraview@paraview.org *Subject:* Re: [Paraview] failed to launch paraview.exe You should using matching compilers for both ParaView and Qt especially if one is built debug and the other release. Unfortunately ParaView does not build Qt for you. On Fri, Feb 18, 2011 at 10:45 AM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, It is the same setup with my MSVC2008 ParaView, where Qt is a prebuild release with MSVC2008 from http://code.google.com/p/qt-msvc-installer/downloads/list Very good catch!!! Does that mean I should either rebuild Qt with MSVC2010 or let ParaView build Qt along the way? Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Friday, February 18, 2011 10:25 AM To: Xunlei Wu Cc: David Partyka; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Xulei, Just to be sure you are using Qt that was built with the same compilter right? Utkarsh On Fri, Feb 18, 2011 at 9:48 AM, Xunlei Wu xun...@renci.org wrote: Hi David and Utkarsh, With your new patch on Python _DEBUG from git source, I was able to build on MSVC2010 without any PYTHON related hitches. I still have issues with VTK_WRAP_PYTHON_SIP as I reported earlier though. When I launched the newly built paraview.exe I got the exact same error in pqApplicationCore.cxx, line 725: vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); QString config_file has value C:/ParaViewGit_VS2010/bin/Debug/../.plugins. However, config_file.toStdString() has corrupted content. BTW, shall I care about DirectX_LIBRARY? It appears ParaView's vtkRendering only uses DirectX9. Does including DirectX help ParaView performance on Windows machine? Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool
Re: [Paraview] failed to launch paraview.exe
No, I am able to include DirectX in the build. I am not sure whether it helps the rendering performance or potentially causing conflictions with OpenGL. So I guess there is no value in terms of performance gain and induces no conflictions with other settings, right? x From: David Partyka [mailto:david.part...@kitware.com] Sent: Friday, February 18, 2011 11:02 AM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe It isn't required but is used to do some hardware support queries. Are you getting compile/configure errors complaining about not finding some part of DirectX? On Fri, Feb 18, 2011 at 10:57 AM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Thanks a lot, David and Utkarsh. I was obnoxious about Qt aspect totally. By using this thread, can you comment on using DirectX with Paraview on Windows? Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Friday, February 18, 2011 10:54 AM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe You should using matching compilers for both ParaView and Qt especially if one is built debug and the other release. Unfortunately ParaView does not build Qt for you. On Fri, Feb 18, 2011 at 10:45 AM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, It is the same setup with my MSVC2008 ParaView, where Qt is a prebuild release with MSVC2008 from http://code.google.com/p/qt-msvc-installer/downloads/list Very good catch!!! Does that mean I should either rebuild Qt with MSVC2010 or let ParaView build Qt along the way? Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com] Sent: Friday, February 18, 2011 10:25 AM To: Xunlei Wu Cc: David Partyka; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Xulei, Just to be sure you are using Qt that was built with the same compilter right? Utkarsh On Fri, Feb 18, 2011 at 9:48 AM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi David and Utkarsh, With your new patch on Python _DEBUG from git source, I was able to build on MSVC2010 without any PYTHON related hitches. I still have issues with VTK_WRAP_PYTHON_SIP as I reported earlier though. When I launched the newly built paraview.exe I got the exact same error in pqApplicationCore.cxx, line 725: vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); QString config_file has value C:/ParaViewGit_VS2010/bin/Debug/../.plugins. However, config_file.toStdString() has corrupted content. BTW, shall I care about DirectX_LIBRARY? It appears ParaView's vtkRendering only uses DirectX9. Does including DirectX help ParaView performance on Windows machine? Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac
[Paraview] failed to launch paraview.exe
Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML(const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConfigurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ATT88437.plugins Description: ATT88437.plugins ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML(const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConfigurationXML( config_file.toStdString().c_str()); } Where config_file is “C:/ParaViewGit/bin/Debug/../.plugins”. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes “0x Bad Ptr”. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Hi Utkarsh and Dave, It is C:/ParaViewGit/bin/Debug/../.plugins It looks all valid. However, even extracting the QString content before calling LoadPluginConfigurationXML(), say const char* fn_c_str = config_file.toStdString().c_str(); std::string fn_std_str = config_file.toStdString(); gives me corrupted content. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:20 PM To: Xunlei Wu Cc: paraview@paraview.org; Dave Partyka Subject: Re: [Paraview] failed to launch paraview.exe Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML ( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginCon f igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.comhttp://www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x *From:* David Partyka [mailto:david.part...@kitware.com] *Sent:* Monday, February 14, 2011 1:23 PM *To:* Utkarsh Ayachit *Cc:* Xunlei Wu; paraview@paraview.org *Subject:* Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Hi Dave, I presume your build has all the compnents, e.g. Python, MySQL, MPI, ... enabled, right? x From: David Partyka [mailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:36 PM To: Xunlei Wu Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x From: David Partyka [mailto:david.part...@kitware.commailto:david.part...@kitware.com] Sent: Monday, February 14, 2011 1:23 PM To: Utkarsh Ayachit Cc: Xunlei Wu; paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.commailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.orgmailto:paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.orgmailto:xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.comhttp://www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
Re: [Paraview] failed to launch paraview.exe
Python and MPI but not MySQL. If you don't mind, can you send us your CMakeCache.txt from the root of your build tree? I am curious if I can glean anything from that. (feel free to send it off list). On Mon, Feb 14, 2011 at 1:46 PM, Xunlei Wu xun...@renci.org wrote: Hi Dave, I presume your build has all the compnents, e.g. Python, MySQL, MPI, … enabled, right? x *From:* David Partyka [mailto:david.part...@kitware.com] *Sent:* Monday, February 14, 2011 1:36 PM *To:* Xunlei Wu *Cc:* Utkarsh Ayachit; paraview@paraview.org *Subject:* Re: [Paraview] failed to launch paraview.exe Just to confirm. The VS10 x64 build on our nightly dashboard launches without issue. On Mon, Feb 14, 2011 at 1:27 PM, Xunlei Wu xun...@renci.org wrote: Thanks, David. Please give me a day or two. I just flooded the VS10 build directory with my previous successful VS08 build in order to get some work done. I will build through VS10 tomorrow night. Best, x *From:* David Partyka [mailto:david.part...@kitware.com] *Sent:* Monday, February 14, 2011 1:23 PM *To:* Utkarsh Ayachit *Cc:* Xunlei Wu; paraview@paraview.org *Subject:* Re: [Paraview] failed to launch paraview.exe We do test nightly with VS10 and one of our developers actively uses it as well so it should work. Have you tried running paraview with -dr command? In the mean time I will try and run the vs10 build on the dashboard machine. On Mon, Feb 14, 2011 at 1:20 PM, Utkarsh Ayachit utkarsh.ayac...@kitware.com wrote: Honestly, I am not the best guy to comment about windows, I use linux for most of my development. Dave, any insights? What is the value of config_file variable in pqApplicationCore.cxx:725? Utkarsh On Mon, Feb 14, 2011 at 1:15 PM, Xunlei Wu xun...@renci.org wrote: Hi Utkarsh, This is the only copy of ParaView I am building from git source. I have no ther VTK installation. BTW, do you see many issues with MSVC2010? I am frustrated with ParaView building process and not sure whether it is compiler/IDE related. Thanks a lot. Best, x -Original Message- From: Utkarsh Ayachit [mailto:utkarsh.ayac...@kitware.com] Sent: Monday, February 14, 2011 1:13 PM To: Xunlei Wu Cc: paraview@paraview.org Subject: Re: [Paraview] failed to launch paraview.exe Are you sure there isn't some dll conflict issue? Do you have other installations of ParaView? Utkarsh On Mon, Feb 14, 2011 at 1:10 PM, Xunlei Wu xun...@renci.org wrote: Hi All, I am trying to run paraview.exe after built it (Debug version) on a Windows7 64bit + MSVC2010 machine. However the application failed to run the following call stack: vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x) Line 928 + 0xd bytes C++ vtksys.dll!vtksys::SystemTools::FileExists(const char * filename=0x, bool isFile=true) Line 950 + 0xa bytes C++ vtkPVServerManager.dll!vtkSMPluginManager::LoadPluginConfigurationXML( const char * filename=0x) Line 97 + 0x10 bytes C++ pqCore.dll!pqApplicationCore::loadDistributedPlugins(const char * filename=0x) Line 726 + 0x5d bytes C++ The related lines of code might be: pqApplicationCore.cxx:line 725 vtkSMApplication::GetApplication()-GetPluginManager()-LoadPluginConf igurationXML( config_file.toStdString().c_str()); } Where config_file is C:/ParaViewGit/bin/Debug/../.plugins. Such file is attached. After the process runs into vtkSMPluginManager void vtkSMPluginManager::LoadPluginConfigurationXML(const char* filename) { bool debug_plugin = vtksys::SystemTools::GetEnv(PV_PLUGIN_DEBUG) != NULL; vtkPVPluginLoaderDebugMacro(Loading plugin configuration xml: filename); if (!vtksys::SystemTools::FileExists(filename, true)) { Where filename becomes 0x Bad Ptr. Any idea? Thanks a lot. Best, x ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview ___ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview