Re: To all Total Recorder tutorials
Try file open url. I think you need the professional version for this to work. I believe it records the stream direct if you have no conversion set. Bob - Original Message - From: "Steve Matzura" To: "PC Audio Discussion List" Sent: Sunday, June 12, 2011 6:32 AM Subject: Re: To all Total Recorder tutorials OK John, you've succeeded in the whack-me-over-the-head part, now let's get on to the tell-me-about-it part (LOL). If you set the recording option in TR to Software, it load Winamp, which actually plays the stream in question right through your sound card. The audio is captured from the sound card, not from the stream packets themselves. I know this is true by two proofs. 1. If you use Winamp's down- and up-arrow volume buttons while recording a stream in Total Recorder, when you play the stream back that you just recorded while manipulating those buttons, the volume of the stream will, in fact, go down, then up again. 2. If you record a short stream with WGet (or, in my case, WinWGet, because I like wrappers), and then compare that recording with another short stream from the same source using TR+Winamp methodology, if your ears are good, which mine are not but I've been told this by more than one person with far, far better ears than my broken ones, you'll notice that the TR+Winamp version of the recorded stream has artifacts that the WGet stream does not. I suspect these artifacts are from digital audio being converted to analog, played through the sound card, then re-encoded by TR. Like I said, personally I cannot hear these artifacts any more, but I believe they are there and I believe the reason for their existence is as explained. If TR has a way of getting around this, I'd dearly love to know how it's done. That would make my weekly captures of various radio programs sound so-o much better. On Sun, 12 Jun 2011 06:03:17 -0400, you wrote: Yep, it does work exactly that way -- I don't know what you were looking at. Steve Matzura wrote: I think it definitely should be brought to their attention. Any job in the queue should have the ability to be run on demand and stopped either on a schedule or, again, on demand. That's one of the beauties of WinWGet. Except WinWGet isn't as fancy as TR in that there's no scheduling function, and, to be honest, since WinWGet doesn't use external programs to connect to and capture the stream, it actually make a better, purer, recording because it just captures the raw packets from the stream, doesn't re-encode anything another program is playing. I sure wish TR worked this way, and if it doesn, somebody needs to whack me over the head and tell me about it. On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: >Hi. >No, I don't think there is a way to test the scheduled job. Perhaps >it's >a suggestion we ought to bring to High Criteria's attention. >What do you think? >Chat soon. > > >Chris Hallsworth >Sent from Thunderbird > >On 11/06/2011 15:13, Steve Matzura wrote: >> Hi, Chris: >> >> Do you know of a way to "test", and I put that word in quotes, a job >> that has been set up in the scheduler to make sure the URL is right >> and the bit-rate and file settings are all good before the job is let >> loose to do what it's supposed to do? I've never found a force-run or >> force-start option in TR. Is there such a thing? >> >> TIA >> >> On Thu, 24 Feb 2011 20:48:14 +, you wrote: >> >>> Hello all. >>> Here are two links to my tutorial on Total Recorder. >>> Part 1. >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 >>> Part 2. >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 >>> Hope this helps. >>> Take care. >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org >> > >To unsubscribe from this list, send a blank email to: >pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
I think within the setup for background recording, there is a way to test/play a stream to see if it works. I don't know how one could possibly make sure a scheduled item would actually run unless you set it up to record within the next few minutes, then afterward, editing the entry to run at a later date or hour. At 12:57 PM 6/11/2011, you wrote: Hi. No, I don't think there is a way to test the scheduled job. Perhaps it's a suggestion we ought to bring to High Criteria's attention. What do you think? Chat soon. Chris Hallsworth Sent from Thunderbird On 11/06/2011 15:13, Steve Matzura wrote: Hi, Chris: Do you know of a way to "test", and I put that word in quotes, a job that has been set up in the scheduler to make sure the URL is right and the bit-rate and file settings are all good before the job is let loose to do what it's supposed to do? I've never found a force-run or force-start option in TR. Is there such a thing? TIA On Thu, 24 Feb 2011 20:48:14 +, you wrote: Hello all. Here are two links to my tutorial on Total Recorder. Part 1. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 Part 2. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 Hope this helps. Take care. To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
Background recording? That must be new, or I never noticed it before. Will try it and get back to you in a day or two. On Sun, 12 Jun 2011 10:51:36 -0400, you wrote: >hmmm, all I do is set the job to background recording, maybe you set it >to record instead? Works for most streams, and if you can give the >direct URL to the stream, so much the better. > >Steve Matzura wrote: > >> OK John, you've succeeded in the whack-me-over-the-head part, now >> let's get on to the tell-me-about-it part (LOL). >> >> If you set the recording option in TR to Software, it load Winamp, >> which actually plays the stream in question right through your sound >> card. The audio is captured from the sound card, not from the stream >> packets themselves. I know this is true by two proofs. 1. If you use >> Winamp's down- and up-arrow volume buttons while recording a stream in >> Total Recorder, when you play the stream back that you just recorded >> while manipulating those buttons, the volume of the stream will, in >> fact, go down, then up again. 2. If you record a short stream with >> WGet (or, in my case, WinWGet, because I like wrappers), and then >> compare that recording with another short stream from the same source >> using TR+Winamp methodology, if your ears are good, which mine are not >> but I've been told this by more than one person with far, far better >> ears than my broken ones, you'll notice that the TR+Winamp version of >> the recorded stream has artifacts that the WGet stream does not. I >> suspect these artifacts are from digital audio being converted to >> analog, played through the sound card, then re-encoded by TR. Like I >> said, personally I cannot hear these artifacts any more, but I believe >> they are there and I believe the reason for their existence is as >> explained. If TR has a way of getting around this, I'd dearly love to >> know how it's done. That would make my weekly captures of various >> radio programs sound so-o much better. >> >> On Sun, 12 Jun 2011 06:03:17 -0400, you wrote: >> >> >Yep, it does work exactly that way -- I don't know what you were looking >> >at. >> > >> >Steve Matzura wrote: >> > >> >> I think it definitely should be brought to their attention. Any job in >> >> the queue should have the ability to be run on demand and stopped >> >> either on a schedule or, again, on demand. That's one of the beauties >> >> of WinWGet. Except WinWGet isn't as fancy as TR in that there's no >> >> scheduling function, and, to be honest, since WinWGet doesn't use >> >> external programs to connect to and capture the stream, it actually >> >> make a better, purer, recording because it just captures the raw >> >> packets from the stream, doesn't re-encode anything another program is >> >> playing. I sure wish TR worked this way, and if it doesn, somebody >> >> needs to whack me over the head and tell me about it. >> >> >> >> On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: >> >> >> >> >Hi. >> >> >No, I don't think there is a way to test the scheduled job. Perhaps it's >> >> >a suggestion we ought to bring to High Criteria's attention. >> >> >What do you think? >> >> >Chat soon. >> >> > >> >> > >> >> >Chris Hallsworth >> >> >Sent from Thunderbird >> >> > >> >> >On 11/06/2011 15:13, Steve Matzura wrote: >> >> >> Hi, Chris: >> >> >> >> >> >> Do you know of a way to "test", and I put that word in quotes, a job >> >> >> that has been set up in the scheduler to make sure the URL is right >> >> >> and the bit-rate and file settings are all good before the job is let >> >> >> loose to do what it's supposed to do? I've never found a force-run or >> >> >> force-start option in TR. Is there such a thing? >> >> >> >> >> >> TIA >> >> >> >> >> >> On Thu, 24 Feb 2011 20:48:14 +, you wrote: >> >> >> >> >> >>> Hello all. >> >> >>> Here are two links to my tutorial on Total Recorder. >> >> >>> Part 1. >> >> >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 >> >> >>> Part 2. >> >> >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 >> >> >>> Hope this helps. >> >> >>> Take care. >> >> >> >> >> >> To unsubscribe from this list, send a blank email to: >> >> >> pc-audio-unsubscr...@pc-audio.org >> >> >> >> >> > >> >> >To unsubscribe from this list, send a blank email to: >> >> >pc-audio-unsubscr...@pc-audio.org >> >> >> >> To unsubscribe from this list, send a blank email to: >> >> pc-audio-unsubscr...@pc-audio.org >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
the dorpbox link for download this toturial not work cov...@ccs.covici.com skrev 2011-06-12 16:51: hmmm, all I do is set the job to background recording, maybe you set it to record instead? Works for most streams, and if you can give the direct URL to the stream, so much the better. Steve Matzura wrote: OK John, you've succeeded in the whack-me-over-the-head part, now let's get on to the tell-me-about-it part (LOL). If you set the recording option in TR to Software, it load Winamp, which actually plays the stream in question right through your sound card. The audio is captured from the sound card, not from the stream packets themselves. I know this is true by two proofs. 1. If you use Winamp's down- and up-arrow volume buttons while recording a stream in Total Recorder, when you play the stream back that you just recorded while manipulating those buttons, the volume of the stream will, in fact, go down, then up again. 2. If you record a short stream with WGet (or, in my case, WinWGet, because I like wrappers), and then compare that recording with another short stream from the same source using TR+Winamp methodology, if your ears are good, which mine are not but I've been told this by more than one person with far, far better ears than my broken ones, you'll notice that the TR+Winamp version of the recorded stream has artifacts that the WGet stream does not. I suspect these artifacts are from digital audio being converted to analog, played through the sound card, then re-encoded by TR. Like I said, personally I cannot hear these artifacts any more, but I believe they are there and I believe the reason for their existence is as explained. If TR has a way of getting around this, I'd dearly love to know how it's done. That would make my weekly captures of various radio programs sound so-o much better. On Sun, 12 Jun 2011 06:03:17 -0400, you wrote: Yep, it does work exactly that way -- I don't know what you were looking at. Steve Matzura wrote: I think it definitely should be brought to their attention. Any job in the queue should have the ability to be run on demand and stopped either on a schedule or, again, on demand. That's one of the beauties of WinWGet. Except WinWGet isn't as fancy as TR in that there's no scheduling function, and, to be honest, since WinWGet doesn't use external programs to connect to and capture the stream, it actually make a better, purer, recording because it just captures the raw packets from the stream, doesn't re-encode anything another program is playing. I sure wish TR worked this way, and if it doesn, somebody needs to whack me over the head and tell me about it. On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: Hi. No, I don't think there is a way to test the scheduled job. Perhaps it's a suggestion we ought to bring to High Criteria's attention. What do you think? Chat soon. Chris Hallsworth Sent from Thunderbird On 11/06/2011 15:13, Steve Matzura wrote: Hi, Chris: Do you know of a way to "test", and I put that word in quotes, a job that has been set up in the scheduler to make sure the URL is right and the bit-rate and file settings are all good before the job is let loose to do what it's supposed to do? I've never found a force-run or force-start option in TR. Is there such a thing? TIA On Thu, 24 Feb 2011 20:48:14 +, you wrote: Hello all. Here are two links to my tutorial on Total Recorder. Part 1. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 Part 2. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 Hope this helps. Take care. To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
hmmm, all I do is set the job to background recording, maybe you set it to record instead? Works for most streams, and if you can give the direct URL to the stream, so much the better. Steve Matzura wrote: > OK John, you've succeeded in the whack-me-over-the-head part, now > let's get on to the tell-me-about-it part (LOL). > > If you set the recording option in TR to Software, it load Winamp, > which actually plays the stream in question right through your sound > card. The audio is captured from the sound card, not from the stream > packets themselves. I know this is true by two proofs. 1. If you use > Winamp's down- and up-arrow volume buttons while recording a stream in > Total Recorder, when you play the stream back that you just recorded > while manipulating those buttons, the volume of the stream will, in > fact, go down, then up again. 2. If you record a short stream with > WGet (or, in my case, WinWGet, because I like wrappers), and then > compare that recording with another short stream from the same source > using TR+Winamp methodology, if your ears are good, which mine are not > but I've been told this by more than one person with far, far better > ears than my broken ones, you'll notice that the TR+Winamp version of > the recorded stream has artifacts that the WGet stream does not. I > suspect these artifacts are from digital audio being converted to > analog, played through the sound card, then re-encoded by TR. Like I > said, personally I cannot hear these artifacts any more, but I believe > they are there and I believe the reason for their existence is as > explained. If TR has a way of getting around this, I'd dearly love to > know how it's done. That would make my weekly captures of various > radio programs sound so-o much better. > > On Sun, 12 Jun 2011 06:03:17 -0400, you wrote: > > >Yep, it does work exactly that way -- I don't know what you were looking > >at. > > > >Steve Matzura wrote: > > > >> I think it definitely should be brought to their attention. Any job in > >> the queue should have the ability to be run on demand and stopped > >> either on a schedule or, again, on demand. That's one of the beauties > >> of WinWGet. Except WinWGet isn't as fancy as TR in that there's no > >> scheduling function, and, to be honest, since WinWGet doesn't use > >> external programs to connect to and capture the stream, it actually > >> make a better, purer, recording because it just captures the raw > >> packets from the stream, doesn't re-encode anything another program is > >> playing. I sure wish TR worked this way, and if it doesn, somebody > >> needs to whack me over the head and tell me about it. > >> > >> On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: > >> > >> >Hi. > >> >No, I don't think there is a way to test the scheduled job. Perhaps it's > >> >a suggestion we ought to bring to High Criteria's attention. > >> >What do you think? > >> >Chat soon. > >> > > >> > > >> >Chris Hallsworth > >> >Sent from Thunderbird > >> > > >> >On 11/06/2011 15:13, Steve Matzura wrote: > >> >> Hi, Chris: > >> >> > >> >> Do you know of a way to "test", and I put that word in quotes, a job > >> >> that has been set up in the scheduler to make sure the URL is right > >> >> and the bit-rate and file settings are all good before the job is let > >> >> loose to do what it's supposed to do? I've never found a force-run or > >> >> force-start option in TR. Is there such a thing? > >> >> > >> >> TIA > >> >> > >> >> On Thu, 24 Feb 2011 20:48:14 +, you wrote: > >> >> > >> >>> Hello all. > >> >>> Here are two links to my tutorial on Total Recorder. > >> >>> Part 1. > >> >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 > >> >>> Part 2. > >> >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 > >> >>> Hope this helps. > >> >>> Take care. > >> >> > >> >> To unsubscribe from this list, send a blank email to: > >> >> pc-audio-unsubscr...@pc-audio.org > >> >> > >> > > >> >To unsubscribe from this list, send a blank email to: > >> >pc-audio-unsubscr...@pc-audio.org > >> > >> To unsubscribe from this list, send a blank email to: > >> pc-audio-unsubscr...@pc-audio.org > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici cov...@ccs.covici.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
OK John, you've succeeded in the whack-me-over-the-head part, now let's get on to the tell-me-about-it part (LOL). If you set the recording option in TR to Software, it load Winamp, which actually plays the stream in question right through your sound card. The audio is captured from the sound card, not from the stream packets themselves. I know this is true by two proofs. 1. If you use Winamp's down- and up-arrow volume buttons while recording a stream in Total Recorder, when you play the stream back that you just recorded while manipulating those buttons, the volume of the stream will, in fact, go down, then up again. 2. If you record a short stream with WGet (or, in my case, WinWGet, because I like wrappers), and then compare that recording with another short stream from the same source using TR+Winamp methodology, if your ears are good, which mine are not but I've been told this by more than one person with far, far better ears than my broken ones, you'll notice that the TR+Winamp version of the recorded stream has artifacts that the WGet stream does not. I suspect these artifacts are from digital audio being converted to analog, played through the sound card, then re-encoded by TR. Like I said, personally I cannot hear these artifacts any more, but I believe they are there and I believe the reason for their existence is as explained. If TR has a way of getting around this, I'd dearly love to know how it's done. That would make my weekly captures of various radio programs sound so-o much better. On Sun, 12 Jun 2011 06:03:17 -0400, you wrote: >Yep, it does work exactly that way -- I don't know what you were looking >at. > >Steve Matzura wrote: > >> I think it definitely should be brought to their attention. Any job in >> the queue should have the ability to be run on demand and stopped >> either on a schedule or, again, on demand. That's one of the beauties >> of WinWGet. Except WinWGet isn't as fancy as TR in that there's no >> scheduling function, and, to be honest, since WinWGet doesn't use >> external programs to connect to and capture the stream, it actually >> make a better, purer, recording because it just captures the raw >> packets from the stream, doesn't re-encode anything another program is >> playing. I sure wish TR worked this way, and if it doesn, somebody >> needs to whack me over the head and tell me about it. >> >> On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: >> >> >Hi. >> >No, I don't think there is a way to test the scheduled job. Perhaps it's >> >a suggestion we ought to bring to High Criteria's attention. >> >What do you think? >> >Chat soon. >> > >> > >> >Chris Hallsworth >> >Sent from Thunderbird >> > >> >On 11/06/2011 15:13, Steve Matzura wrote: >> >> Hi, Chris: >> >> >> >> Do you know of a way to "test", and I put that word in quotes, a job >> >> that has been set up in the scheduler to make sure the URL is right >> >> and the bit-rate and file settings are all good before the job is let >> >> loose to do what it's supposed to do? I've never found a force-run or >> >> force-start option in TR. Is there such a thing? >> >> >> >> TIA >> >> >> >> On Thu, 24 Feb 2011 20:48:14 +, you wrote: >> >> >> >>> Hello all. >> >>> Here are two links to my tutorial on Total Recorder. >> >>> Part 1. >> >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 >> >>> Part 2. >> >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 >> >>> Hope this helps. >> >>> Take care. >> >> >> >> To unsubscribe from this list, send a blank email to: >> >> pc-audio-unsubscr...@pc-audio.org >> >> >> > >> >To unsubscribe from this list, send a blank email to: >> >pc-audio-unsubscr...@pc-audio.org >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
i wnat the link. the link not work! Steve Matzura skrev 2011-06-12 07:34: That's true, but can you record from that? If so, it's a good workaround, albeit clumsy and fraught with the possibility of messing something up if you change something without realizing you did it. On Sat, 11 Jun 2011 16:23:07 -0400, you wrote: Well, you can have it check the URL when you first make the job, its somewhat tricky to use, but it will tell you what it finds and you can see if its a real stream, or a player of some kind. chris hallsworth wrote: Hi. No, I don't think there is a way to test the scheduled job. Perhaps it's a suggestion we ought to bring to High Criteria's attention. What do you think? Chat soon. Chris Hallsworth Sent from Thunderbird On 11/06/2011 15:13, Steve Matzura wrote: Hi, Chris: Do you know of a way to "test", and I put that word in quotes, a job that has been set up in the scheduler to make sure the URL is right and the bit-rate and file settings are all good before the job is let loose to do what it's supposed to do? I've never found a force-run or force-start option in TR. Is there such a thing? TIA On Thu, 24 Feb 2011 20:48:14 +, you wrote: Hello all. Here are two links to my tutorial on Total Recorder. Part 1. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 Part 2. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 Hope this helps. Take care. To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
Yep, it does work exactly that way -- I don't know what you were looking at. Steve Matzura wrote: > I think it definitely should be brought to their attention. Any job in > the queue should have the ability to be run on demand and stopped > either on a schedule or, again, on demand. That's one of the beauties > of WinWGet. Except WinWGet isn't as fancy as TR in that there's no > scheduling function, and, to be honest, since WinWGet doesn't use > external programs to connect to and capture the stream, it actually > make a better, purer, recording because it just captures the raw > packets from the stream, doesn't re-encode anything another program is > playing. I sure wish TR worked this way, and if it doesn, somebody > needs to whack me over the head and tell me about it. > > On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: > > >Hi. > >No, I don't think there is a way to test the scheduled job. Perhaps it's > >a suggestion we ought to bring to High Criteria's attention. > >What do you think? > >Chat soon. > > > > > >Chris Hallsworth > >Sent from Thunderbird > > > >On 11/06/2011 15:13, Steve Matzura wrote: > >> Hi, Chris: > >> > >> Do you know of a way to "test", and I put that word in quotes, a job > >> that has been set up in the scheduler to make sure the URL is right > >> and the bit-rate and file settings are all good before the job is let > >> loose to do what it's supposed to do? I've never found a force-run or > >> force-start option in TR. Is there such a thing? > >> > >> TIA > >> > >> On Thu, 24 Feb 2011 20:48:14 +, you wrote: > >> > >>> Hello all. > >>> Here are two links to my tutorial on Total Recorder. > >>> Part 1. > >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 > >>> Part 2. > >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 > >>> Hope this helps. > >>> Take care. > >> > >> To unsubscribe from this list, send a blank email to: > >> pc-audio-unsubscr...@pc-audio.org > >> > > > >To unsubscribe from this list, send a blank email to: > >pc-audio-unsubscr...@pc-audio.org > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici cov...@ccs.covici.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
I think it definitely should be brought to their attention. Any job in the queue should have the ability to be run on demand and stopped either on a schedule or, again, on demand. That's one of the beauties of WinWGet. Except WinWGet isn't as fancy as TR in that there's no scheduling function, and, to be honest, since WinWGet doesn't use external programs to connect to and capture the stream, it actually make a better, purer, recording because it just captures the raw packets from the stream, doesn't re-encode anything another program is playing. I sure wish TR worked this way, and if it doesn, somebody needs to whack me over the head and tell me about it. On Sat, 11 Jun 2011 18:57:03 +0100, you wrote: >Hi. >No, I don't think there is a way to test the scheduled job. Perhaps it's >a suggestion we ought to bring to High Criteria's attention. >What do you think? >Chat soon. > > >Chris Hallsworth >Sent from Thunderbird > >On 11/06/2011 15:13, Steve Matzura wrote: >> Hi, Chris: >> >> Do you know of a way to "test", and I put that word in quotes, a job >> that has been set up in the scheduler to make sure the URL is right >> and the bit-rate and file settings are all good before the job is let >> loose to do what it's supposed to do? I've never found a force-run or >> force-start option in TR. Is there such a thing? >> >> TIA >> >> On Thu, 24 Feb 2011 20:48:14 +, you wrote: >> >>> Hello all. >>> Here are two links to my tutorial on Total Recorder. >>> Part 1. >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 >>> Part 2. >>> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 >>> Hope this helps. >>> Take care. >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org >> > >To unsubscribe from this list, send a blank email to: >pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
That's true, but can you record from that? If so, it's a good workaround, albeit clumsy and fraught with the possibility of messing something up if you change something without realizing you did it. On Sat, 11 Jun 2011 16:23:07 -0400, you wrote: >Well, you can have it check the URL when you first make the job, its >somewhat tricky to use, but it will tell you what it finds and you can >see if its a real stream, or a player of some kind. > >chris hallsworth wrote: > >> Hi. >> No, I don't think there is a way to test the scheduled job. Perhaps >> it's a suggestion we ought to bring to High Criteria's attention. >> What do you think? >> Chat soon. >> >> >> Chris Hallsworth >> Sent from Thunderbird >> >> On 11/06/2011 15:13, Steve Matzura wrote: >> > Hi, Chris: >> > >> > Do you know of a way to "test", and I put that word in quotes, a job >> > that has been set up in the scheduler to make sure the URL is right >> > and the bit-rate and file settings are all good before the job is let >> > loose to do what it's supposed to do? I've never found a force-run or >> > force-start option in TR. Is there such a thing? >> > >> > TIA >> > >> > On Thu, 24 Feb 2011 20:48:14 +, you wrote: >> > >> >> Hello all. >> >> Here are two links to my tutorial on Total Recorder. >> >> Part 1. >> >> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 >> >> Part 2. >> >> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 >> >> Hope this helps. >> >> Take care. >> > >> > To unsubscribe from this list, send a blank email to: >> > pc-audio-unsubscr...@pc-audio.org >> > >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
this link both not work it is say 404 Steve Matzura skrev 2011-06-11 16:13: Hi, Chris: Do you know of a way to "test", and I put that word in quotes, a job that has been set up in the scheduler to make sure the URL is right and the bit-rate and file settings are all good before the job is let loose to do what it's supposed to do? I've never found a force-run or force-start option in TR. Is there such a thing? TIA On Thu, 24 Feb 2011 20:48:14 +, you wrote: Hello all. Here are two links to my tutorial on Total Recorder. Part 1. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 Part 2. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 Hope this helps. Take care. To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
Well, you can have it check the URL when you first make the job, its somewhat tricky to use, but it will tell you what it finds and you can see if its a real stream, or a player of some kind. chris hallsworth wrote: > Hi. > No, I don't think there is a way to test the scheduled job. Perhaps > it's a suggestion we ought to bring to High Criteria's attention. > What do you think? > Chat soon. > > > Chris Hallsworth > Sent from Thunderbird > > On 11/06/2011 15:13, Steve Matzura wrote: > > Hi, Chris: > > > > Do you know of a way to "test", and I put that word in quotes, a job > > that has been set up in the scheduler to make sure the URL is right > > and the bit-rate and file settings are all good before the job is let > > loose to do what it's supposed to do? I've never found a force-run or > > force-start option in TR. Is there such a thing? > > > > TIA > > > > On Thu, 24 Feb 2011 20:48:14 +, you wrote: > > > >> Hello all. > >> Here are two links to my tutorial on Total Recorder. > >> Part 1. > >> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 > >> Part 2. > >> http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 > >> Hope this helps. > >> Take care. > > > > To unsubscribe from this list, send a blank email to: > > pc-audio-unsubscr...@pc-audio.org > > > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici cov...@ccs.covici.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
Hi. No, I don't think there is a way to test the scheduled job. Perhaps it's a suggestion we ought to bring to High Criteria's attention. What do you think? Chat soon. Chris Hallsworth Sent from Thunderbird On 11/06/2011 15:13, Steve Matzura wrote: Hi, Chris: Do you know of a way to "test", and I put that word in quotes, a job that has been set up in the scheduler to make sure the URL is right and the bit-rate and file settings are all good before the job is let loose to do what it's supposed to do? I've never found a force-run or force-start option in TR. Is there such a thing? TIA On Thu, 24 Feb 2011 20:48:14 +, you wrote: Hello all. Here are two links to my tutorial on Total Recorder. Part 1. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 Part 2. http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 Hope this helps. Take care. To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: To all Total Recorder tutorials
Hi, Chris: Do you know of a way to "test", and I put that word in quotes, a job that has been set up in the scheduler to make sure the URL is right and the bit-rate and file settings are all good before the job is let loose to do what it's supposed to do? I've never found a force-run or force-start option in TR. Is there such a thing? TIA On Thu, 24 Feb 2011 20:48:14 +, you wrote: >Hello all. >Here are two links to my tutorial on Total Recorder. >Part 1. >http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast.mp3 >Part 2. >http://dl.dropbox.com/u/1625623/Total_Recorder_Podcast_Part_2.mp3 >Hope this helps. >Take care. To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
