Re: [PD] problems with Delta 1010LT?
My problem has been solved by running alsamixer with flags to Delta-1010LT, and raising input levels there. So, if indeed you (tim) have exactly the same problem, then this should solve it. Hi Jaime, when running alsamixer like this: alsamixer -D hw:1 I can set the adc sliders for the Delta-1010LT from there. problem solved, thanks! Tim J On Sun, Nov 9, 2008 at 10:30 AM, Miller Puckette [EMAIL PROTECTED] wrote: Wierd. I have out-of-the-box Fedora 9 running (it's a terrible Fedora release, by hte way, I'm going to switch to 10 when it comes out later this month) and my delta1010LT runs fine. So if it's an ALSA bug it must have been fixed meanwhile. BTW, there are 4 jumpers on the 1010LT card; if they are missing the first two inputs might not work (but the other 6 should anyway.) cheers Miller On Sun, Nov 09, 2008 at 04:56:48PM +0100, tim wrote: hello Jamie and list, exact same problem here. Delta1010LT outputs work, inputs don't. I tried on ubuntu hardy and pure:dyne. I checked all there is to check in envy24 control. btw, There are also other problems showing up with alsa lately. For example, the Echo Layla 3G stopped working altogether. I'll try Bryan's suggestions later... Tim On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote: morning Jaime, I have the same card in my desktop here under debian testing/unstable, and have also successfully used all the analog in- and outputs with pd. The only potential causes for your problem that occur to me are stupid ones that you've probably already checked, e.g. routing problems on the card [have you run envy24control and checked that the input levels (tab page analog volume) are all up where they should be?] Did you start pd with -channels 8? I also vaguely remember hearing of problems with the alsa mixer API (alsamixer, amixer, etc.) for envy24 cards -- the conventional wisdom seems to be: avoid ALSA's mixer and use only envy24control for this card. You might also check whether your distro is doing something sneaky like calling amixer behind your back when the driver module (snd_ice1712) is loaded (e.g. as a post-install operation declared in /etc/modules.conf)... other than that, I'm pretty much out of ideas... I haven't found any file /etc/modules.conf, but I did find /etc/asound.conf #SWCONF #DEV 0 defaults.pcm.card 0 defaults.pcm.device 0 defaults.ctl.card 0 marmosets, Bryan On 2008-11-09 09:06:25, Jaime Oliver [EMAIL PROTECTED] appears to have written: Hello all, I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed to use the 8 channels OUT, but can't get a signal into pd in any of the 8 channels IN. Has anyone else seen something like this? best, J -- Jaime E Oliver LR [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver http://www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ http://www-crca.ucsd.edu/ www.realidadvisual.org http://www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA -- ... www.timvets.net [EMAIL PROTECTED], [EMAIL PROTECTED] 0032 474 89 66 86 skype: tim167_ ... ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Jaime E Oliver LR [EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA -- ... www.timvets.net [EMAIL PROTECTED], [EMAIL PROTECTED] 0032 474 89 66 86 skype: tim167_ ... ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] problems with Delta 1010LT?
Hello, My problem has been solved by running alsamixer with flags to Delta-1010LT, and raising input levels there. So, if indeed you (tim) have exactly the same problem, then this should solve it. J On Sun, Nov 9, 2008 at 10:30 AM, Miller Puckette [EMAIL PROTECTED]wrote: Wierd. I have out-of-the-box Fedora 9 running (it's a terrible Fedora release, by hte way, I'm going to switch to 10 when it comes out later this month) and my delta1010LT runs fine. So if it's an ALSA bug it must have been fixed meanwhile. BTW, there are 4 jumpers on the 1010LT card; if they are missing the first two inputs might not work (but the other 6 should anyway.) cheers Miller On Sun, Nov 09, 2008 at 04:56:48PM +0100, tim wrote: hello Jamie and list, exact same problem here. Delta1010LT outputs work, inputs don't. I tried on ubuntu hardy and pure:dyne. I checked all there is to check in envy24 control. btw, There are also other problems showing up with alsa lately. For example, the Echo Layla 3G stopped working altogether. I'll try Bryan's suggestions later... Tim On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote: morning Jaime, I have the same card in my desktop here under debian testing/unstable, and have also successfully used all the analog in- and outputs with pd. The only potential causes for your problem that occur to me are stupid ones that you've probably already checked, e.g. routing problems on the card [have you run envy24control and checked that the input levels (tab page analog volume) are all up where they should be?] Did you start pd with -channels 8? I also vaguely remember hearing of problems with the alsa mixer API (alsamixer, amixer, etc.) for envy24 cards -- the conventional wisdom seems to be: avoid ALSA's mixer and use only envy24control for this card. You might also check whether your distro is doing something sneaky like calling amixer behind your back when the driver module (snd_ice1712) is loaded (e.g. as a post-install operation declared in /etc/modules.conf)... other than that, I'm pretty much out of ideas... I haven't found any file /etc/modules.conf, but I did find /etc/asound.conf #SWCONF #DEV 0 defaults.pcm.card 0 defaults.pcm.device 0 defaults.ctl.card 0 marmosets, Bryan On 2008-11-09 09:06:25, Jaime Oliver [EMAIL PROTECTED] appears to have written: Hello all, I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed to use the 8 channels OUT, but can't get a signal into pd in any of the 8 channels IN. Has anyone else seen something like this? best, J -- Jaime E Oliver LR [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver http://www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ http://www-crca.ucsd.edu/ www.realidadvisual.org http://www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA -- ... www.timvets.net [EMAIL PROTECTED], [EMAIL PROTECTED] 0032 474 89 66 86 skype: tim167_ ... ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Jaime E Oliver LR [EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
[PD] problems with Delta 1010LT?
Hello all, I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed to use the 8 channels OUT, but can't get a signal into pd in any of the 8 channels IN. Has anyone else seen something like this? best, J -- Jaime E Oliver LR [EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] problems with Delta 1010LT?
morning Jaime, I have the same card in my desktop here under debian testing/unstable, and have also successfully used all the analog in- and outputs with pd. The only potential causes for your problem that occur to me are stupid ones that you've probably already checked, e.g. routing problems on the card [have you run envy24control and checked that the input levels (tab page analog volume) are all up where they should be?] Did you start pd with -channels 8? I also vaguely remember hearing of problems with the alsa mixer API (alsamixer, amixer, etc.) for envy24 cards -- the conventional wisdom seems to be: avoid ALSA's mixer and use only envy24control for this card. You might also check whether your distro is doing something sneaky like calling amixer behind your back when the driver module (snd_ice1712) is loaded (e.g. as a post-install operation declared in /etc/modules.conf)... other than that, I'm pretty much out of ideas... marmosets, Bryan On 2008-11-09 09:06:25, Jaime Oliver [EMAIL PROTECTED] appears to have written: Hello all, I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed to use the 8 channels OUT, but can't get a signal into pd in any of the 8 channels IN. Has anyone else seen something like this? best, J -- Jaime E Oliver LR [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver http://www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ http://www-crca.ucsd.edu/ www.realidadvisual.org http://www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA -- Bryan Jurish There is *always* one more bug. [EMAIL PROTECTED] -Lubarsky's Law of Cybernetic Entomology ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] problems with Delta 1010LT?
hello Jamie and list, exact same problem here. Delta1010LT outputs work, inputs don't. I tried on ubuntu hardy and pure:dyne. I checked all there is to check in envy24 control. btw, There are also other problems showing up with alsa lately. For example, the Echo Layla 3G stopped working altogether. I'll try Bryan's suggestions later... Tim On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote: morning Jaime, I have the same card in my desktop here under debian testing/unstable, and have also successfully used all the analog in- and outputs with pd. The only potential causes for your problem that occur to me are stupid ones that you've probably already checked, e.g. routing problems on the card [have you run envy24control and checked that the input levels (tab page analog volume) are all up where they should be?] Did you start pd with -channels 8? I also vaguely remember hearing of problems with the alsa mixer API (alsamixer, amixer, etc.) for envy24 cards -- the conventional wisdom seems to be: avoid ALSA's mixer and use only envy24control for this card. You might also check whether your distro is doing something sneaky like calling amixer behind your back when the driver module (snd_ice1712) is loaded (e.g. as a post-install operation declared in /etc/modules.conf)... other than that, I'm pretty much out of ideas... marmosets, Bryan On 2008-11-09 09:06:25, Jaime Oliver [EMAIL PROTECTED] appears to have written: Hello all, I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed to use the 8 channels OUT, but can't get a signal into pd in any of the 8 channels IN. Has anyone else seen something like this? best, J -- Jaime E Oliver LR [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver http://www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ http://www-crca.ucsd.edu/ www.realidadvisual.org http://www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA -- ... www.timvets.net [EMAIL PROTECTED], [EMAIL PROTECTED] 0032 474 89 66 86 skype: tim167_ ... ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] problems with Delta 1010LT?
Wierd. I have out-of-the-box Fedora 9 running (it's a terrible Fedora release, by hte way, I'm going to switch to 10 when it comes out later this month) and my delta1010LT runs fine. So if it's an ALSA bug it must have been fixed meanwhile. BTW, there are 4 jumpers on the 1010LT card; if they are missing the first two inputs might not work (but the other 6 should anyway.) cheers Miller On Sun, Nov 09, 2008 at 04:56:48PM +0100, tim wrote: hello Jamie and list, exact same problem here. Delta1010LT outputs work, inputs don't. I tried on ubuntu hardy and pure:dyne. I checked all there is to check in envy24 control. btw, There are also other problems showing up with alsa lately. For example, the Echo Layla 3G stopped working altogether. I'll try Bryan's suggestions later... Tim On Sun, 2008-11-09 at 12:36 +0100, Bryan Jurish wrote: morning Jaime, I have the same card in my desktop here under debian testing/unstable, and have also successfully used all the analog in- and outputs with pd. The only potential causes for your problem that occur to me are stupid ones that you've probably already checked, e.g. routing problems on the card [have you run envy24control and checked that the input levels (tab page analog volume) are all up where they should be?] Did you start pd with -channels 8? I also vaguely remember hearing of problems with the alsa mixer API (alsamixer, amixer, etc.) for envy24 cards -- the conventional wisdom seems to be: avoid ALSA's mixer and use only envy24control for this card. You might also check whether your distro is doing something sneaky like calling amixer behind your back when the driver module (snd_ice1712) is loaded (e.g. as a post-install operation declared in /etc/modules.conf)... other than that, I'm pretty much out of ideas... marmosets, Bryan On 2008-11-09 09:06:25, Jaime Oliver [EMAIL PROTECTED] appears to have written: Hello all, I have an M-Audio Delta 1010LT in Fedora 8. I never installed any drivers since it seemed to work right out of the box. I have managed to use the 8 channels OUT, but can't get a signal into pd in any of the 8 channels IN. Has anyone else seen something like this? best, J -- Jaime E Oliver LR [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] www.realidadvisual.org/jaimeoliver http://www.realidadvisual.org/jaimeoliver www-crca.ucsd.edu/ http://www-crca.ucsd.edu/ www.realidadvisual.org http://www.realidadvisual.org 858 202 1522 9168 Regents Rd. Apt. G La Jolla, CA 92037 USA -- ... www.timvets.net [EMAIL PROTECTED], [EMAIL PROTECTED] 0032 474 89 66 86 skype: tim167_ ... ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
