Re: [ADMIN] Question On 7.4RC2

2003-11-14 Thread Glenn Wiorek
Thanks for the ideas I will also check them out and first try RC1 to see if
I get the same results.
This was also reported by someone else as per Tom Lane reply below.  -- 
Glenn

>>t means the stats collector is failing, probably because it's unable to
>>set up the self-connected UDP port that the stats code uses.  Kiyoshi
>>Sawada reported the same problem on Solaris a day or two back on
>>pg-hackers, but we've not yet been able to identify why it's failing.
>>(The code involved got rewritten in 7.4 for IPv6 support, so some
>>portability problems aren't too surprising ...)  Can you dig into it
>>there?

- Original Message - 
From: "Christopher Browne" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 13, 2003 9:23 AM
Subject: Re: [ADMIN] Question On 7.4RC2


> [EMAIL PROTECTED] ("Glenn Wiorek") writes:
> > I just finished compiling 7.4RC2 on Solaris 8 and ran the regression
> > tests (make check). The last test out of 93 (stats) failed. Is
> > this of concern?
>
> I haven't "regressed" 7.4RC2 on Solaris, though I did do RC1, without
> any problems.  Let's see...  What might be interesting differences...
>
> Could you share what versions of things you're using?  For instance,
> here's the uname, pg_config, and gcc versioning information I find.
> If there are interesting differences, that might point to where the
> problem is...
>
> [EMAIL PROTECTED] /disk3/OXRS/postgresql-7.4RC1 > uname -a
> SunOS ringo 5.8 Generic_108528-17 sun4u sparc SUNW,Ultra-4
>
> [EMAIL PROTECTED] /disk3/OXRS/postgresql-7.4RC1 >
/opt/OXRS/pgsql74rc1/bin/pg_config --configure
> '--prefix=/opt/OXRS/pgsql74rc1'
'--with-includes=/opt/OXRS/readline-4.2/include'
'--with-libraries=/opt/OXRS/readline-4.2/lib' '--enable-locale'
'--enable-syslog' '--enable-debug'
>
> [EMAIL PROTECTED] /disk3/OXRS/postgresql-7.4RC1 > gcc -v
> Reading specs from /usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.2/specs
> Configured with:
../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld --disable-n
ls
> Thread model: posix
> gcc version 3.2
> -- 
> (format nil "[EMAIL PROTECTED]" "cbbrowne" "libertyrms.info")
> <http://dev6.int.libertyrms.com/>
> Christopher Browne
> (416) 646 3304 x124 (land)
>
> ---(end of broadcast)---
> TIP 7: don't forget to increase your free space map settings
>
>



---(end of broadcast)---
TIP 8: explain analyze is your friend


Re: [ADMIN] Question On 7.4RC2

2003-11-14 Thread Christopher Browne
[EMAIL PROTECTED] ("Glenn Wiorek") writes:
> I just finished compiling 7.4RC2 on Solaris 8 and ran the regression
> tests (make check).  The last test out of 93 (stats) failed.  Is
> this of concern? 

I haven't "regressed" 7.4RC2 on Solaris, though I did do RC1, without
any problems.  Let's see...  What might be interesting differences...

Could you share what versions of things you're using?  For instance,
here's the uname, pg_config, and gcc versioning information I find.
If there are interesting differences, that might point to where the
problem is...

[EMAIL PROTECTED] /disk3/OXRS/postgresql-7.4RC1 > uname -a
SunOS ringo 5.8 Generic_108528-17 sun4u sparc SUNW,Ultra-4

[EMAIL PROTECTED] /disk3/OXRS/postgresql-7.4RC1 > /opt/OXRS/pgsql74rc1/bin/pg_config 
--configure
'--prefix=/opt/OXRS/pgsql74rc1' '--with-includes=/opt/OXRS/readline-4.2/include' 
'--with-libraries=/opt/OXRS/readline-4.2/lib'  '--enable-locale' '--enable-syslog' 
'--enable-debug'

[EMAIL PROTECTED] /disk3/OXRS/postgresql-7.4RC1 > gcc -v
Reading specs from /usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.2/specs
Configured with: ../configure --with-as=/usr/ccs/bin/as --with-ld=/usr/ccs/bin/ld 
--disable-nls
Thread model: posix
gcc version 3.2
-- 
(format nil "[EMAIL PROTECTED]" "cbbrowne" "libertyrms.info")

Christopher Browne
(416) 646 3304 x124 (land)

---(end of broadcast)---
TIP 7: don't forget to increase your free space map settings


Re: [ADMIN] Question On 7.4RC2

2003-11-12 Thread Tom Lane
"Glenn Wiorek" <[EMAIL PROTECTED]> writes:
> I just finished compiling 7.4RC2 on Solaris 8 and ran the regression tests =
> (make check).  The last test out of 93 (stats) failed.  Is this of concern?=

It means the stats collector is failing, probably because it's unable to
set up the self-connected UDP port that the stats code uses.  Kiyoshi
Sawada reported the same problem on Solaris a day or two back on
pg-hackers, but we've not yet been able to identify why it's failing.
(The code involved got rewritten in 7.4 for IPv6 support, so some
portability problems aren't too surprising ...)  Can you dig into it
there?

regards, tom lane

---(end of broadcast)---
TIP 1: subscribe and unsubscribe commands go to [EMAIL PROTECTED]


[ADMIN] Question On 7.4RC2

2003-11-12 Thread Glenn Wiorek



I just finished compiling 7.4RC2 on Solaris 8 and ran the regression tests 
(make check).  The last test out of 93 (stats) failed.  Is this of 
concern?  
7.3.3 passed all tests (89 for that release).
 
./regression.diffs
*** ./expected/stats.out    Fri Oct 
31 21:18:20 2003--- ./results/stats.out Wed Nov 12 15:18:56 
2003** 8,14   SHOW 
stats_start_collector;  -- must be on   
stats_start_collector  ---!  on  
(1 row)
 
  -- save counters--- 8,14   SHOW 
stats_start_collector;  -- must be on   
stats_start_collector  ---!  off  
(1 row)
 
  -- save counters** 62,68 
   WHERE st.relname='tenk2' AND 
cl.relname='tenk2';   ?column? | ?column? | ?column? | 
?column?  --+--+--+--
!  t    | 
t    | 
t    | t  (1 row)
 
  SELECT st.heap_blks_read + st.heap_blks_hit >= pr.heap_blks + 
cl.relpages,--- 62,68    WHERE st.relname='tenk2' AND 
cl.relname='tenk2';   ?column? | ?column? | ?column? | 
?column?  --+--+--+--!  
f    | 
f    | 
f    | f  (1 row)
 
  SELECT st.heap_blks_read + st.heap_blks_hit >= pr.heap_blks + 
cl.relpages,** 71,77    WHERE 
st.relname='tenk2' AND cl.relname='tenk2';   ?column? | 
?column?  --+--!  
t    | t  (1 row)
 
  -- clean up--- 71,77 
   WHERE st.relname='tenk2' AND 
cl.relname='tenk2';   ?column? | ?column?  
--+--!  f    | 
f  (1 row)
 
  -- clean up
 
*
./regression.out
 
 
parallel group (14 tests):  limit conversion sequence copy2 
polymorphism truncate without_oid temp
    
 prepare stats rangefuncs domain plpgsql 
alter_table 
plpgsql  
... ok 
copy2    
... ok 
temp 
... ok 
domain   
... ok 
rangefuncs   ... 
ok 
prepare  
... ok 
without_oid  ... 
ok 
conversion   ... 
ok 
truncate 
... ok 
alter_table  ... 
ok 
sequence 
... ok 
polymorphism ... 
ok 
stats    
... FAILED
 
 
Thanks,
Glenn Wiorek