Re: [PLUG] Username for network device
If you are ok with this, trust hosts on your network, you could enable NFS mount for all IPs on your private network this way: 192.168.1.1/24 instead of listing individual hosts. That would save you from configuring it the next time you add a host or change host's IP. I'd keep the root host to single host though. -T On Feb 22, 2018 8:11 PM, "John Jason Jordan" wrote: On Thu, 22 Feb 2018 14:00:12 -0800 John Jason Jordan dijo: Success! I tried dozens and dozens of usernames and I finally hit it. Everything on the Synology is now visible on the new desktop! And now I will write the username and password on a piece of paper and tape it to the Synology. ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
On Thu, 22 Feb 2018 14:00:12 -0800 John Jason Jordan dijo: Success! I tried dozens and dozens of usernames and I finally hit it. Everything on the Synology is now visible on the new desktop! And now I will write the username and password on a piece of paper and tape it to the Synology. ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
On Thu, 22 Feb 2018 01:59:46 -0800 Tomas Kuchta dijo: >One more thing comes to my mind, if you run out of ideas. Try to keep >domain names same between the NAS and hosts, if you set them up. If you >didn't, check them, new distros can have different defaults. Everything on my network is 192.168.1.x. The router is: D-Link DIR-860L B1 Firmware VersionLEDE Reboot SNAPSHOT r3761-6bada71e51 / LuCI Master (git-17.074.58473-ea801ada7) Kernel Version 4.4.53 My laptop is named Devil-Bonobo and has two IP addresses: 192.168.1.126 (for ethernet) and 192.168.136 (for wifi). My old desktop was Devil-10 and was 192.168.1.146. I chose those numbers because if I could remember any of them I could remember all of them. I set these numbers in the router based on the MAC addresses of the computers. And the Synology is 192.168.1.115. When I first booted the new desktop there was no setting for it in the router, so it assigned it 192.168.1.107. At the time I had not yet realized the problem I would have with the Synology, so I went into the router and set it to 192.168.1.156. Now I realize that it needs to be -146, but there is another problem: In spite of being set to -156 in the router, every time I reboot the new desktop the router assigns it -107. I need someone with router exorcism powers to get rid of -107. And then I need to figure out how to set it to -146, because there are a bewildering and confusing number of displays in the router administration that apparently I am not setting up correctly. It might be easier to do this from the command line if I had a clue what commands to use. At least I need to figure out how to force the router to reboot and reassign numbers to connected devices. ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
One more thing comes to my mind, if you run out of ideas. Try to keep domain names same between the NAS and hosts, if you set them up. If you didn't, check them, new distros can have different defaults. On Feb 22, 2018 1:55 AM, "Tomas Kuchta" wrote: > It seems that you have listed IP's allowed to mount the NFS export(s). If > the password reset doesn't work, you could also try to give your new > machine the same IP as the old one had. > > NFS maps usernames to internal uuids on the NAS. So, you should also keep > the usernames identical on old/new hosts. > > -T > > On Feb 21, 2018 10:06 PM, "John Jason Jordan" wrote: > >> On Wed, 21 Feb 2018 17:43:24 -0800 >> Tomas Kuchta dijo: >> >> >I do not think that you will be able to break into the NAS without >> >either pulling disks out, mounting them on the PC and resetting the >> >password or by factory reset. So that would take some effort or data >> >loss. >> > >> >How did you access your data before without the password? NFS, >> >CIFS,...? I bet that both NFS and CIFS mounts are functional even on >> >Ubuntu. >> >> My laptop accesses the Synology without a problem. There is this line >> in fstab that mounts it every time I boot the laptop: >> >> 192.168.1.115:/volume1/Synology /media/jjj/Synology nfs >> auto,user 0 0 >> >> So I added the line to fstab on the new desktop and rebooted. When it >> came up I saw Synology in the Thunar file manager, so I clicked on it >> hoping to see the list of files as I do on the laptop. Instead I get a >> popup: >> >> 'mount.nfs access denied by server while mounting >> 192.168.1.115/volume1/Synology.' >> >> The line in fstab is identical on both machines. I think the problem is >> that (apparently) when I set up the Synology I added something telling >> it to accept requests from the laptop and the old desktop. Now I need >> to add a permission for the new desktop. Unfortunately, I can't get in >> to the Synology administration because I have forgotten the username or >> password. >> ___ >> PLUG mailing list >> PLUG@pdxlinux.org >> http://lists.pdxlinux.org/mailman/listinfo/plug >> > ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
It seems that you have listed IP's allowed to mount the NFS export(s). If the password reset doesn't work, you could also try to give your new machine the same IP as the old one had. NFS maps usernames to internal uuids on the NAS. So, you should also keep the usernames identical on old/new hosts. -T On Feb 21, 2018 10:06 PM, "John Jason Jordan" wrote: > On Wed, 21 Feb 2018 17:43:24 -0800 > Tomas Kuchta dijo: > > >I do not think that you will be able to break into the NAS without > >either pulling disks out, mounting them on the PC and resetting the > >password or by factory reset. So that would take some effort or data > >loss. > > > >How did you access your data before without the password? NFS, > >CIFS,...? I bet that both NFS and CIFS mounts are functional even on > >Ubuntu. > > My laptop accesses the Synology without a problem. There is this line > in fstab that mounts it every time I boot the laptop: > > 192.168.1.115:/volume1/Synology /media/jjj/Synology nfs > auto,user 0 0 > > So I added the line to fstab on the new desktop and rebooted. When it > came up I saw Synology in the Thunar file manager, so I clicked on it > hoping to see the list of files as I do on the laptop. Instead I get a > popup: > > 'mount.nfs access denied by server while mounting > 192.168.1.115/volume1/Synology.' > > The line in fstab is identical on both machines. I think the problem is > that (apparently) when I set up the Synology I added something telling > it to accept requests from the laptop and the old desktop. Now I need > to add a permission for the new desktop. Unfortunately, I can't get in > to the Synology administration because I have forgotten the username or > password. > ___ > PLUG mailing list > PLUG@pdxlinux.org > http://lists.pdxlinux.org/mailman/listinfo/plug > ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
On 02/21/2018 10:06 PM, John Jason Jordan wrote: On Wed, 21 Feb 2018 17:43:24 -0800 Tomas Kuchta dijo: I do not think that you will be able to break into the NAS without either pulling disks out, mounting them on the PC and resetting the password or by factory reset. So that would take some effort or data loss. How did you access your data before without the password? NFS, CIFS,...? I bet that both NFS and CIFS mounts are functional even on Ubuntu. My laptop accesses the Synology without a problem. There is this line in fstab that mounts it every time I boot the laptop: 192.168.1.115:/volume1/Synology /media/jjj/Synology nfs auto,user 0 0 So I added the line to fstab on the new desktop and rebooted. When it came up I saw Synology in the Thunar file manager, so I clicked on it hoping to see the list of files as I do on the laptop. Instead I get a popup: 'mount.nfs access denied by server while mounting 192.168.1.115/volume1/Synology.' The line in fstab is identical on both machines. I think the problem is that (apparently) when I set up the Synology I added something telling it to accept requests from the laptop and the old desktop. Now I need to add a permission for the new desktop. Unfortunately, I can't get in to the Synology administration because I have forgotten the username or password. ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug Any help? https://www.synology.com/en-us/knowledgebase/DSM/tutorial/General/How_do_I_log_in_if_I_forgot_the_admin_password ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
On Wed, 21 Feb 2018 17:43:24 -0800 Tomas Kuchta dijo: >I do not think that you will be able to break into the NAS without >either pulling disks out, mounting them on the PC and resetting the >password or by factory reset. So that would take some effort or data >loss. > >How did you access your data before without the password? NFS, >CIFS,...? I bet that both NFS and CIFS mounts are functional even on >Ubuntu. My laptop accesses the Synology without a problem. There is this line in fstab that mounts it every time I boot the laptop: 192.168.1.115:/volume1/Synology /media/jjj/Synology nfs auto,user 0 0 So I added the line to fstab on the new desktop and rebooted. When it came up I saw Synology in the Thunar file manager, so I clicked on it hoping to see the list of files as I do on the laptop. Instead I get a popup: 'mount.nfs access denied by server while mounting 192.168.1.115/volume1/Synology.' The line in fstab is identical on both machines. I think the problem is that (apparently) when I set up the Synology I added something telling it to accept requests from the laptop and the old desktop. Now I need to add a permission for the new desktop. Unfortunately, I can't get in to the Synology administration because I have forgotten the username or password. ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
Re: [PLUG] Username for network device
I do not think that you will be able to break into the NAS without either pulling disks out, mounting them on the PC and resetting the password or by factory reset. So that would take some effort or data loss. How did you access your data before without the password? NFS, CIFS,...? I bet that both NFS and CIFS mounts are functional even on Ubuntu. -T On Feb 21, 2018 2:08 PM, "John Jason Jordan" wrote: > My old desktop could connect to my Synology and browse files on it, but > that capability does not yet exist in the new Xubuntu. The Synology is > visible, but when I try to view files on it (i.e., mount it) I get a > prompt asking for the username and password. I tried several of my usual > usernames, but all fail. > > Is there a way to find out from the device the username that it is > expecting? > ___ > PLUG mailing list > PLUG@pdxlinux.org > http://lists.pdxlinux.org/mailman/listinfo/plug > ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug
[PLUG] Username for network device
My old desktop could connect to my Synology and browse files on it, but that capability does not yet exist in the new Xubuntu. The Synology is visible, but when I try to view files on it (i.e., mount it) I get a prompt asking for the username and password. I tried several of my usual usernames, but all fail. Is there a way to find out from the device the username that it is expecting? ___ PLUG mailing list PLUG@pdxlinux.org http://lists.pdxlinux.org/mailman/listinfo/plug