Re: CHIRP on Kubuntu 22.04 fixed it
Today I found out what I did wrong. First I installed via synaptic. Today I installed chirp legacy, which worked but doesn't get any updates. Then I tried installing via flatpak and snap. The versions I got both times didn't work. Finally I went to the chirp site, followed the instructions there. It works. https://chirp.danplanet.com/projects/chirp/wiki/ChirpOnLinux Lesson learned. Never forget RTFM. --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
Re: CHIRP on Kubuntu 22.04
My cable only has one connector and the radio is a Yaesu Ft-65R. It used to work before I upgraded to 22.04, and still works on windows 10. On 6/22/23 21:45, Joe Neglia via PLUG-discuss wrote: I had the same problem. After some frustration, I discovered that putting pressure on that dual audio-style connector with my hand to hold in tightly in place throughout the entire download process solved the connectivity problem. Then again, I'm using a cheap Baofeng radio and Baofeng cable, so that might not be your problem. (Also, I'm running Debian, not Kubuntu.) On Thu, Jun 22, 2023 at 8:47 PM Michael Butash via PLUG-discuss wrote: Looks like it's just creating a generic usb serial port, so I'd presume you need to tell the program your hardware device serial speed, flow control, bits, etc and have it misconfigured currently it's erroring in that seeing bits it expects returned. Being legacy serial vs like a hardware sdr, this is not negotiated but rather needs set for your device requirements usually, but depending on your hardware that might not always be the same. Also make sure the port is actually running on /dev/ttyUSB0 and not USB1 or other, I've had this happen if a cable gets yanked or wiggled causing the device to reset too quickly and is already in use. Check using "dmesg | grep usbTTY" to make sure the number. -mb On Thu, Jun 22, 2023 at 4:37 PM Jim via PLUG-discuss wrote: I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program that allows for easy programming of a transceiver and for backing up the configuration of the radio in question. I've used it before I upgraded to 22.04 and it worked. Now it doesn't. I have the port set to /dev/ttyUSB0. I give CHIRP the correct vendor and model information. Then I click download. Chirp shows nothing, but the radio says TX and a progress bar then Clone OK when it's done. This is what should happen. However Chirp should also show a progress bar. However it does nothing. Instead it give me a dialog box that says: Error communicating with the radio module 'collections' has to attribute 'Callable" This suggests to me that Chirp is sending data to the radio that tells it to send its data to Chirp, but it acts like the computer isn't able to receive it. Does anyone know how to fix this? Thanks. --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list:PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss--- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
Re: CHIRP on Kubuntu 22.04
On 6/22/23 20:46, Michael Butash via PLUG-discuss wrote: Looks like it's just creating a generic usb serial port, so I'd presume you need to tell the program your hardware device serial speed, flow control, bits, etc and have it misconfigured currently it's erroring in that seeing bits it expects returned. Being legacy serial vs like a hardware sdr, this is not negotiated but rather needs set for your device requirements usually, but depending on your hardware that might not always be the same. There's no way in CHIRP to set any of this. It gives me the option to set a port. My options are /dev/ttyS0 - ttyS31 and /dev/ttyUSB0. Also make sure the port is actually running on /dev/ttyUSB0 and not USB1 or other, I've had this happen if a cable gets yanked or wiggled causing the device to reset too quickly and is already in use. Check using "dmesg | grep usbTTY" to make sure the number. dmesg | grep usbTTY provided no results, but "dmesg | grep usbTTY" returned the following: [19805.739059] usb 3-4.3: pl2303 converter now attached to ttyUSB0 -mb On Thu, Jun 22, 2023 at 4:37 PM Jim via PLUG-discuss wrote: I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program that allows for easy programming of a transceiver and for backing up the configuration of the radio in question. I've used it before I upgraded to 22.04 and it worked. Now it doesn't. I have the port set to /dev/ttyUSB0. I give CHIRP the correct vendor and model information. Then I click download. Chirp shows nothing, but the radio says TX and a progress bar then Clone OK when it's done. This is what should happen. However Chirp should also show a progress bar. However it does nothing. Instead it give me a dialog box that says: Error communicating with the radio module 'collections' has to attribute 'Callable" This suggests to me that Chirp is sending data to the radio that tells it to send its data to Chirp, but it acts like the computer isn't able to receive it. Does anyone know how to fix this? Thanks. --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list:PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss--- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
Re: CHIRP on Kubuntu 22.04
I've put myself in the dialout group. Still doesn't work. On 6/22/23 20:34, Phil Waclawski via PLUG-discuss wrote: I'm not familiar with that, but I know that in order to get my dive computer to work with subsurface on Linux I have to add my user to the dialout group. Maybe there's something like that for chirp? On Thu, Jun 22, 2023, 19:37 Jim via PLUG-discuss wrote: I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program that allows for easy programming of a transceiver and for backing up the configuration of the radio in question. I've used it before I upgraded to 22.04 and it worked. Now it doesn't. I have the port set to /dev/ttyUSB0. I give CHIRP the correct vendor and model information. Then I click download. Chirp shows nothing, but the radio says TX and a progress bar then Clone OK when it's done. This is what should happen. However Chirp should also show a progress bar. However it does nothing. Instead it give me a dialog box that says: Error communicating with the radio module 'collections' has to attribute 'Callable" This suggests to me that Chirp is sending data to the radio that tells it to send its data to Chirp, but it acts like the computer isn't able to receive it. Does anyone know how to fix this? Thanks. --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list:PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss--- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
Re: CHIRP on Kubuntu 22.04
I had the same problem. After some frustration, I discovered that putting pressure on that dual audio-style connector with my hand to hold in tightly in place throughout the entire download process solved the connectivity problem. Then again, I'm using a cheap Baofeng radio and Baofeng cable, so that might not be your problem. (Also, I'm running Debian, not Kubuntu.) On Thu, Jun 22, 2023 at 8:47 PM Michael Butash via PLUG-discuss < plug-discuss@lists.phxlinux.org> wrote: > Looks like it's just creating a generic usb serial port, so I'd presume > you need to tell the program your hardware device serial speed, flow > control, bits, etc and have it misconfigured currently it's erroring in > that seeing bits it expects returned. Being legacy serial vs like a > hardware sdr, this is not negotiated but rather needs set for your device > requirements usually, but depending on your hardware that might not always > be the same. > > Also make sure the port is actually running on /dev/ttyUSB0 and not USB1 > or other, I've had this happen if a cable gets yanked or wiggled causing > the device to reset too quickly and is already in use. Check using "dmesg > | grep usbTTY" to make sure the number. > > -mb > > > On Thu, Jun 22, 2023 at 4:37 PM Jim via PLUG-discuss < > plug-discuss@lists.phxlinux.org> wrote: > >> I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program >> that allows for easy programming of a transceiver and for backing up the >> configuration of the radio in question. I've used it before I upgraded >> to 22.04 and it worked. Now it doesn't. I have the port set to >> /dev/ttyUSB0. I give CHIRP the correct vendor and model information. >> Then I click download. Chirp shows nothing, but the radio says TX and a >> progress bar then Clone OK when it's done. This is what should happen. >> However Chirp should also show a progress bar. However it does >> nothing. Instead it give me a dialog box that says: >> >> Error communicating with the radio >> >> module 'collections' has to attribute 'Callable" >> >> This suggests to me that Chirp is sending data to the radio that tells >> it to send its data to Chirp, but it acts like the computer isn't able >> to receive it. Does anyone know how to fix this? >> >> >> Thanks. >> >> --- >> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> https://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > --- > PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > https://lists.phxlinux.org/mailman/listinfo/plug-discuss > --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
Re: CHIRP on Kubuntu 22.04
Looks like it's just creating a generic usb serial port, so I'd presume you need to tell the program your hardware device serial speed, flow control, bits, etc and have it misconfigured currently it's erroring in that seeing bits it expects returned. Being legacy serial vs like a hardware sdr, this is not negotiated but rather needs set for your device requirements usually, but depending on your hardware that might not always be the same. Also make sure the port is actually running on /dev/ttyUSB0 and not USB1 or other, I've had this happen if a cable gets yanked or wiggled causing the device to reset too quickly and is already in use. Check using "dmesg | grep usbTTY" to make sure the number. -mb On Thu, Jun 22, 2023 at 4:37 PM Jim via PLUG-discuss < plug-discuss@lists.phxlinux.org> wrote: > I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program > that allows for easy programming of a transceiver and for backing up the > configuration of the radio in question. I've used it before I upgraded > to 22.04 and it worked. Now it doesn't. I have the port set to > /dev/ttyUSB0. I give CHIRP the correct vendor and model information. > Then I click download. Chirp shows nothing, but the radio says TX and a > progress bar then Clone OK when it's done. This is what should happen. > However Chirp should also show a progress bar. However it does > nothing. Instead it give me a dialog box that says: > > Error communicating with the radio > > module 'collections' has to attribute 'Callable" > > This suggests to me that Chirp is sending data to the radio that tells > it to send its data to Chirp, but it acts like the computer isn't able > to receive it. Does anyone know how to fix this? > > > Thanks. > > --- > PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > https://lists.phxlinux.org/mailman/listinfo/plug-discuss > --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
Re: CHIRP on Kubuntu 22.04
I'm not familiar with that, but I know that in order to get my dive computer to work with subsurface on Linux I have to add my user to the dialout group. Maybe there's something like that for chirp? On Thu, Jun 22, 2023, 19:37 Jim via PLUG-discuss < plug-discuss@lists.phxlinux.org> wrote: > I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program > that allows for easy programming of a transceiver and for backing up the > configuration of the radio in question. I've used it before I upgraded > to 22.04 and it worked. Now it doesn't. I have the port set to > /dev/ttyUSB0. I give CHIRP the correct vendor and model information. > Then I click download. Chirp shows nothing, but the radio says TX and a > progress bar then Clone OK when it's done. This is what should happen. > However Chirp should also show a progress bar. However it does > nothing. Instead it give me a dialog box that says: > > Error communicating with the radio > > module 'collections' has to attribute 'Callable" > > This suggests to me that Chirp is sending data to the radio that tells > it to send its data to Chirp, but it acts like the computer isn't able > to receive it. Does anyone know how to fix this? > > > Thanks. > > --- > PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org > To subscribe, unsubscribe, or to change your mail settings: > https://lists.phxlinux.org/mailman/listinfo/plug-discuss > --- PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org To subscribe, unsubscribe, or to change your mail settings: https://lists.phxlinux.org/mailman/listinfo/plug-discuss
