Re: ssh in network
server is installed on all of them. On Mon, Apr 2, 2012 at 2:45 PM, Dazed_75 lthiels...@gmail.com wrote: server needs to be installed on any and all machines you want to ssh TO. Server is the component/daemon that listens for a request to connect. On Mon, Apr 2, 2012 at 12:55 PM, Michael Havens bmi...@gmail.com wrote: guess what I just found out openssh-server wasn't installed on the laptop. So I installed it and now netstat has the same line on it that says port 22 sudo netstat -antp | grep 22 tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 433/sshd However, I still can't ssh to the ubuntu. But I scan ssh from the ubuntu to the mint. Yipee! On Mon, Apr 2, 2012 at 9:26 AM, Michael Havens bmi...@gmail.com wrote: On Sun, Apr 1, 2012 at 7:28 PM, Lisa Kachold lisakach...@obnosis.com wrote: Are you colorblind? ^-- only slightly respond inline. ^---not sure what you mean. Let's address each item until we resolve things: On Sun, Apr 1, 2012 at 5:49 PM, Michael Havens bmi...@gmail.com wrote: A route add command is not persistent past a reboot or network restart. It seems to have been. I rebooted and still can't ssh from the laptop to the ubuntu. But you couldn't also ssh BEFORE you did the route add so these are two different things. Yes I could. I could ssh from the laptop to the ubuntu (printserver) until I issued the command ' sudo ip route add 192.168.1.0/24http://192.168.0.1/24dev eth0' on the ubuntu on the advice of my google search. Then I tried to delete it and add the proper route (192.168.0.1) but that didn't help any. Take down your wlan (are you using wicd?) ^---Wireless is now off. I don't know what Mint uses... it doesn't say. Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 433/sshd ubuntu tcp0 0 0.0.0.0:139 0.0.0.0:* LISTEN 12243/smbd tcp0 0 0.0.0.0:445 0.0.0.0:* LISTEN 12243/smbd laptop Good you have sshd listening on port 22 on ubuntu. You do NOT have sshd (daemon) listening on your laptop. Be sure you have started it if you want to ssh to the laptop from ubuntu: # sudo /etc/init.d/ssh start In order to make sure ssh starts at boot in Ubuntu: # sudo update-rc.d ssh defaults -done Reference: https://help.ubuntu.com/community/UbuntuBootupHowto Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more sudo locate Deny|more --no respose sudo locate iptables-save|more /sbin/iptables-save /usr/share/man/man8/iptables-save.8.gz enter # sudo iptables-save You are looking to see if your iptables is up and configured to firewall ssh. Dump the response in here. bmike1@Michaels-PC:~$ sudo locate iptables-save /sbin/iptables-save /usr/share/man/man8/iptables-save.8.gz bmike1@Michaels-PC:~$ Oops, sorry wrong link! ddclient is for opendns dynamic dns entries, that logs into your provider and resets a public ip when needed. Turn it down for now:* # sudo /etc/init.d/ddclient stop* ^-done Here's how to set it up (once you get ssh setup); it requires an opendns account. http://ubuntuforums.org/showthread.php?t=1264710 http://ubuntuforums.org/showthread.php?t=1264710 ^--if you can remember please remind me laterhttp://ubuntuforums.org/showthread.php?t=1264710 http://ubuntuforums.org/showthread.php?t=1264710 your system is updated, if it runs? Correct? ^ Correct Check your /etc/nsswitch.conf file to be sure it has hosts: files dns Reference: http://www.faqs.org/docs/securing/chap6sec71.html I'm not sure what you want here. Here is the file: # /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis Then ping each server before trying to reconnect with ssh.--- they ping both ways. I am pretty sure that this will work now that you have them both on the same network. Be sure you don't have any iptables running denying your port 22 on both servers! iptables -L doesn't have any deny rules in it I don't see any deny rules in my iptables. -- :-)~MIKE~(-: -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- Dazed_75 a.k.a. Larry Please protect my address like I protect yours. When sending messages to multiple recipients, always use the BCC: (Blind carbon copy) and not To: or CC:. Remove all
Re: ssh in network
and yet your previous message was that you discovered it was not installed on the laptop. Hence my reminder that it needs to be on any box you want to ssh TO. [?] On Mon, Apr 2, 2012 at 11:08 PM, Michael Havens bmi...@gmail.com wrote: server is installed on all of them. On Mon, Apr 2, 2012 at 2:45 PM, Dazed_75 lthiels...@gmail.com wrote: server needs to be installed on any and all machines you want to ssh TO. Server is the component/daemon that listens for a request to connect. On Mon, Apr 2, 2012 at 12:55 PM, Michael Havens bmi...@gmail.com wrote: guess what I just found out openssh-server wasn't installed on the laptop. So I installed it and now netstat has the same line on it that says port 22 -- Dazed_75 a.k.a. Larry Please protect my address like I protect yours. When sending messages to multiple recipients, always use the BCC: (Blind carbon copy) and not To: or CC:. Remove all addresses from the message body before sending a Forwarded message. This can prevent spy programs capturing addresses from the recipient list and message body. 330.gif--- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
yep. I even checked againafter I got /home working. openssh-server is already the newest version. openssh-server set to manually installed. . On Tue, Apr 3, 2012 at 8:31 AM, Dazed_75 lthiels...@gmail.com wrote: and yet your previous message was that you discovered it was not installed on the laptop. Hence my reminder that it needs to be on any box you want to ssh TO. [?] On Mon, Apr 2, 2012 at 11:08 PM, Michael Havens bmi...@gmail.com wrote: server is installed on all of them. On Mon, Apr 2, 2012 at 2:45 PM, Dazed_75 lthiels...@gmail.com wrote: server needs to be installed on any and all machines you want to ssh TO. Server is the component/daemon that listens for a request to connect. On Mon, Apr 2, 2012 at 12:55 PM, Michael Havens bmi...@gmail.comwrote: guess what I just found out openssh-server wasn't installed on the laptop. So I installed it and now netstat has the same line on it that says port 22 -- Dazed_75 a.k.a. Larry Please protect my address like I protect yours. When sending messages to multiple recipients, always use the BCC: (Blind carbon copy) and not To: or CC:. Remove all addresses from the message body before sending a Forwarded message. This can prevent spy programs capturing addresses from the recipient list and message body. --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- :-)~MIKE~(-: 330.gif--- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
server needs to be installed on any and all machines you want to ssh TO. Server is the component/daemon that listens for a request to connect. On Mon, Apr 2, 2012 at 12:55 PM, Michael Havens bmi...@gmail.com wrote: guess what I just found out openssh-server wasn't installed on the laptop. So I installed it and now netstat has the same line on it that says port 22 sudo netstat -antp | grep 22 tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 433/sshd However, I still can't ssh to the ubuntu. But I scan ssh from the ubuntu to the mint. Yipee! On Mon, Apr 2, 2012 at 9:26 AM, Michael Havens bmi...@gmail.com wrote: On Sun, Apr 1, 2012 at 7:28 PM, Lisa Kachold lisakach...@obnosis.com wrote: Are you colorblind? ^-- only slightly respond inline. ^---not sure what you mean. Let's address each item until we resolve things: On Sun, Apr 1, 2012 at 5:49 PM, Michael Havens bmi...@gmail.com wrote: A route add command is not persistent past a reboot or network restart. It seems to have been. I rebooted and still can't ssh from the laptop to the ubuntu. But you couldn't also ssh BEFORE you did the route add so these are two different things. Yes I could. I could ssh from the laptop to the ubuntu (printserver) until I issued the command ' sudo ip route add 192.168.1.0/24http://192.168.0.1/24dev eth0' on the ubuntu on the advice of my google search. Then I tried to delete it and add the proper route (192.168.0.1) but that didn't help any. Take down your wlan (are you using wicd?) ^---Wireless is now off. I don't know what Mint uses... it doesn't say. Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 433/sshd ubuntu tcp0 0 0.0.0.0:139 0.0.0.0:* LISTEN 12243/smbd tcp0 0 0.0.0.0:445 0.0.0.0:* LISTEN 12243/smbd laptop Good you have sshd listening on port 22 on ubuntu. You do NOT have sshd (daemon) listening on your laptop. Be sure you have started it if you want to ssh to the laptop from ubuntu: # sudo /etc/init.d/ssh start In order to make sure ssh starts at boot in Ubuntu: # sudo update-rc.d ssh defaults -done Reference: https://help.ubuntu.com/community/UbuntuBootupHowto Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more sudo locate Deny|more --no respose sudo locate iptables-save|more /sbin/iptables-save /usr/share/man/man8/iptables-save.8.gz enter # sudo iptables-save You are looking to see if your iptables is up and configured to firewall ssh. Dump the response in here. bmike1@Michaels-PC:~$ sudo locate iptables-save /sbin/iptables-save /usr/share/man/man8/iptables-save.8.gz bmike1@Michaels-PC:~$ Oops, sorry wrong link! ddclient is for opendns dynamic dns entries, that logs into your provider and resets a public ip when needed. Turn it down for now:* # sudo /etc/init.d/ddclient stop* ^-done Here's how to set it up (once you get ssh setup); it requires an opendns account. http://ubuntuforums.org/showthread.php?t=1264710 http://ubuntuforums.org/showthread.php?t=1264710 ^--if you can remember please remind me laterhttp://ubuntuforums.org/showthread.php?t=1264710 http://ubuntuforums.org/showthread.php?t=1264710 your system is updated, if it runs? Correct? ^ Correct Check your /etc/nsswitch.conf file to be sure it has hosts: files dns Reference: http://www.faqs.org/docs/securing/chap6sec71.html I'm not sure what you want here. Here is the file: # /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis Then ping each server before trying to reconnect with ssh.--- they ping both ways. I am pretty sure that this will work now that you have them both on the same network. Be sure you don't have any iptables running denying your port 22 on both servers! iptables -L doesn't have any deny rules in it I don't see any deny rules in my iptables. -- :-)~MIKE~(-: -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- Dazed_75 a.k.a. Larry Please protect my address like I protect yours. When sending messages to multiple recipients, always use the BCC: (Blind carbon copy) and not To: or CC:. Remove all addresses from the message body before sending a Forwarded message. This can prevent spy programs capturing
Re: ssh in network
I was googling the 'no route to host' and found a suggestion to add a route that poimts to the routerr with the command 'sudo ip route add 192.168.1.0/24 dev eth0'. So I thought that sounded good but after I did not only could I not ssh out of the computer but I could no longer ssh into the computer. I then tried to remove the route with the command 'sudo ip route del 192.168.1.0/24 dev eth0', but that didn't help any. I just realized that the ip address is wrong my router is 192.168.0.1 but: sudo ip route add 192.168.0.1/24 dev eth0 RTNETLINK answers: Invalid argument On Sat, Mar 31, 2012 at 4:36 PM, Lisa Kachold lisakach...@obnosis.comwrote: # apt-get install openssh-server sudo apt-get install openssh-server . . . openssh-server is already the newest version. openssh-server set to manually installed. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config there it is. PermitRootLogin yes If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/messages # sudo tail /var/log/syslog bmike1@Michaels-PC:~$ sudo tail /var/log/messages;sudo tail /var/log/syslog tail: cannot open `/var/log/messages' for reading: No such file or directory Apr 1 13:09:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:14:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:17:01 Michaels-PC CRON[8219]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Apr 1 13:19:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:24:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:29:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:34:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:39:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:44:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:49:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' bmike1@Michaels-PC:~$ Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). This is the hosts.allow file that I added. Does this look right? ALL : 127.0.0.1 sshd : 192.168.0.0/24, 192.168.0.1/24, 192.168.0.2/24, 192.168.0.3/24, 192.168.$ this goes on to x.y.z.10/24 #shows address to use from outside of network#, 78.207.132.32 Now the /etc/hosts.deny file: ALL : ALL Do this and your apt-get/aptitude will be fixed: # sudo apt-get install make make is already its current version -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
Reboot On Sun, Apr 1, 2012 at 3:25 PM, Michael Havens bmi...@gmail.com wrote: I was googling the 'no route to host' and found a suggestion to add a route that poimts to the routerr with the command 'sudo ip route add 192.168.1.0/24 dev eth0'. So I thought that sounded good but after I did not only could I not ssh out of the computer but I could no longer ssh into the computer. I then tried to remove the route with the command 'sudo ip route del 192.168.1.0/24 dev eth0', but that didn't help any. I just realized that the ip address is wrong my router is 192.168.0.1 but: sudo ip route add 192.168.0.1/24 dev eth0 RTNETLINK answers: Invalid argument On Sat, Mar 31, 2012 at 4:36 PM, Lisa Kachold lisakach...@obnosis.comwrote: # apt-get install openssh-server sudo apt-get install openssh-server . . . openssh-server is already the newest version. openssh-server set to manually installed. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config there it is. PermitRootLogin yes If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/messages # sudo tail /var/log/syslog bmike1@Michaels-PC:~$ sudo tail /var/log/messages;sudo tail /var/log/syslog tail: cannot open `/var/log/messages' for reading: No such file or directory Apr 1 13:09:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:14:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:17:01 Michaels-PC CRON[8219]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Apr 1 13:19:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:24:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:29:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:34:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:39:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:44:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:49:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' bmike1@Michaels-PC:~$ Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). This is the hosts.allow file that I added. Does this look right? ALL : 127.0.0.1 sshd : 192.168.0.0/24, 192.168.0.1/24, 192.168.0.2/24, 192.168.0.3/24, 192.168.$ this goes on to x.y.z.10/24 #shows address to use from outside of network#, 78.207.132.32 Now the /etc/hosts.deny file: ALL : ALL Do this and your apt-get/aptitude will be fixed: # sudo apt-get install make make is already its current version -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- (503) 754-4452 Android (623) 239-3392 Skype (623) 688-3392 Google Voice ** it-clowns.com --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
snip I was googling the 'no route to host' and found a suggestion to add a route that poimts to the routerr with the command 'sudo ip route add 192.168.1.0/24 dev eth0'. So I thought that sounded good but after I did not only could I not ssh out of the computer but I could no longer ssh into the computer. I then tried to remove the route with the command 'sudo ip route del 192.168.1.0/24 dev eth0', but that didn't help any. I just realized that the ip address is wrong my router is 192.168.0.1 but: sudo ip route add 192.168.0.1/24 dev eth0 RTNETLINK answers: Invalid argument A route add command is not persistent past a reboot or network restart. Mike, ONE of your systems is on your Wireless and the other is on the wired? Sometimes wireless to wired connections take longer than the timeout values for ssh or scp. Try putting them both on either wireless or wired and see if that's more successful? Timeouts could be why you get a no route to host. Verify that both boxes have a default route: # sudo netstat -rn Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more If you don't understand the output post it to the list. # apt-get install openssh-server sudo apt-get install openssh-server . . . openssh-server is already the newest version. openssh-server set to manually installed. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config there it is. PermitRootLogin yes Good! You can ssh to this host with root. If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/syslog bmike1@Michaels-PC:~$ sudo tail /var/log/messages;sudo tail /var/log/syslog tail: cannot open `/var/log/messages' for reading: No such file or directory Apr 1 13:09:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:14:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:17:01 Michaels-PC CRON[8219]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Apr 1 13:19:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:24:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:29:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:34:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:39:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:44:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:49:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' bmike1@Michaels-PC:~$ What - are you running ddclient for? If you can't properly resolve DNS, you will not be able to ssh: Please see this link regarding your ddclient errors: http://www.linuxquestions.org/questions/linux-wireless-networking-41/wifi-connects-but-no-network-access-but-wired-works-880213/ Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). This is the hosts.allow file that I added. Does this look right? ALL : 127.0.0.1 sshd : 192.168.0.0/24, 192.168.0.1/24, 192.168.0.2/24, 192.168.0.3/24, 192.168.$ this goes on to x.y.z.10/24 #shows address to use from outside of network#, 78.207.132.32 No, you need that 78.207.132.32 on the SAME line with either ALL or sshd: or commented out. And 192.168.$ might cause problems. Change it to a safe entry: cut here ALL : 127.0.0.1 sshd : 192.168.0.0/16, 78.207.132.32 http://192.168.0.0/24 ###end ### Make sure you did this: Now the /etc/hosts.deny file: ALL : ALL Do this and your apt-get/aptitude will be fixed: # sudo apt-get install make make is already its current version # sudo apt-get update Also setup your /etc/hosts file on both servers following these suggestions: http://linux.about.com/od/commands/l/blcmdl5_hosts.htm Should look like this (except with all your
Re: ssh in network
Now, instead of the 'no route to host' error I get a 'connection refused'. I still can't ssh to the ubuntu machine. it times out. On Sun, Apr 1, 2012 at 4:08 PM, Lisa Kachold lisakach...@obnosis.comwrote: snip I was googling the 'no route to host' and found a suggestion to add a route that poimts to the routerr with the command 'sudo ip route add 192.168.1.0/24 dev eth0'. So I thought that sounded good but after I did not only could I not ssh out of the computer but I could no longer ssh into the computer. I then tried to remove the route with the command 'sudo ip route del 192.168.1.0/24 dev eth0', but that didn't help any. I just realized that the ip address is wrong my router is 192.168.0.1 but: sudo ip route add 192.168.0.1/24 dev eth0 RTNETLINK answers: Invalid argument A route add command is not persistent past a reboot or network restart. Mike, ONE of your systems is on your Wireless and the other is on the wired? Sometimes wireless to wired connections take longer than the timeout values for ssh or scp. Try putting them both on either wireless or wired and see if that's more successful? Timeouts could be why you get a no route to host. Verify that both boxes have a default route: # sudo netstat -rn Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more If you don't understand the output post it to the list. # apt-get install openssh-server sudo apt-get install openssh-server . . . openssh-server is already the newest version. openssh-server set to manually installed. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config there it is. PermitRootLogin yes Good! You can ssh to this host with root. If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/syslog bmike1@Michaels-PC:~$ sudo tail /var/log/messages;sudo tail /var/log/syslog tail: cannot open `/var/log/messages' for reading: No such file or directory Apr 1 13:09:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:14:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:17:01 Michaels-PC CRON[8219]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Apr 1 13:19:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:24:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:29:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:34:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:39:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:44:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:49:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' bmike1@Michaels-PC:~$ What - are you running ddclient for? If you can't properly resolve DNS, you will not be able to ssh: Please see this link regarding your ddclient errors: http://www.linuxquestions.org/questions/linux-wireless-networking-41/wifi-connects-but-no-network-access-but-wired-works-880213/ Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). This is the hosts.allow file that I added. Does this look right? ALL : 127.0.0.1 sshd : 192.168.0.0/24, 192.168.0.1/24, 192.168.0.2/24, 192.168.0.3/24, 192.168.$ this goes on to x.y.z.10/24 #shows address to use from outside of network#, 78.207.132.32 No, you need that 78.207.132.32 on the SAME line with either ALL or sshd: or commented out. And 192.168.$ might cause problems. Change it to a safe entry: cut here ALL : 127.0.0.1 sshd : 192.168.0.0/16, 78.207.132.32 http://192.168.0.0/24 ###end ### Make sure you did this: Now the /etc/hosts.deny file: ALL : ALL Do this and your apt-get/aptitude will be fixed: # sudo apt-get install make
Re: ssh in network
Michael, did you follow every suggestion in the last email? Reboot check and verify network and ssh daemons including default routes on both machines verify that you have the right settings in your /etc/hosts.allow and /etc/hosts.deny files on both servers add /etc/hosts entries for all your machines verify that you don't have a DenyHost or iptables running Test your ssh again Also: run apt-get update look at why you are using ddclient and why it's failing [from the link I sent] ?? On Sun, Apr 1, 2012 at 4:18 PM, Michael Havens bmi...@gmail.com wrote: Now, instead of the 'no route to host' error I get a 'connection refused'. I still can't ssh to the ubuntu machine. it times out. On Sun, Apr 1, 2012 at 4:08 PM, Lisa Kachold lisakach...@obnosis.comwrote: snip I was googling the 'no route to host' and found a suggestion to add a route that poimts to the routerr with the command 'sudo ip route add 192.168.1.0/24 dev eth0'. So I thought that sounded good but after I did not only could I not ssh out of the computer but I could no longer ssh into the computer. I then tried to remove the route with the command 'sudo ip route del 192.168.1.0/24 dev eth0', but that didn't help any. I just realized that the ip address is wrong my router is 192.168.0.1 but: sudo ip route add 192.168.0.1/24 dev eth0 RTNETLINK answers: Invalid argument A route add command is not persistent past a reboot or network restart. Mike, ONE of your systems is on your Wireless and the other is on the wired? Sometimes wireless to wired connections take longer than the timeout values for ssh or scp. Try putting them both on either wireless or wired and see if that's more successful? Timeouts could be why you get a no route to host. Verify that both boxes have a default route: # sudo netstat -rn Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more If you don't understand the output post it to the list. # apt-get install openssh-server sudo apt-get install openssh-server . . . openssh-server is already the newest version. openssh-server set to manually installed. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config there it is. PermitRootLogin yes Good! You can ssh to this host with root. If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/syslog bmike1@Michaels-PC:~$ sudo tail /var/log/messages;sudo tail /var/log/syslog tail: cannot open `/var/log/messages' for reading: No such file or directory Apr 1 13:09:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:14:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:17:01 Michaels-PC CRON[8219]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Apr 1 13:19:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:24:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:29:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:34:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:39:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:44:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:49:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' bmike1@Michaels-PC:~$ What - are you running ddclient for? If you can't properly resolve DNS, you will not be able to ssh: Please see this link regarding your ddclient errors: http://www.linuxquestions.org/questions/linux-wireless-networking-41/wifi-connects-but-no-network-access-but-wired-works-880213/ Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). This is the hosts.allow file that I added. Does this look right? ALL : 127.0.0.1 sshd : 192.168.0.0/24, 192.168.0.1/24, 192.168.0.2/24, 192.168.0.3/24,
Re: ssh in network
I'm doing your suggestions right now. I don't know how I missed them but after I sent the reply you are responding to I noticed them and started the implemetation of them. I did reboot and still ssh doesn't work. Just wait until you get the response to your suggestion email. Sorry about the confusion. On Sun, Apr 1, 2012 at 4:50 PM, Lisa Kachold lisakach...@obnosis.comwrote: Michael, did you follow every suggestion in the last email? Reboot check and verify network and ssh daemons including default routes on both machines verify that you have the right settings in your /etc/hosts.allow and /etc/hosts.deny files on both servers add /etc/hosts entries for all your machines verify that you don't have a DenyHost or iptables running Test your ssh again Also: run apt-get update look at why you are using ddclient and why it's failing [from the link I sent] ?? On Sun, Apr 1, 2012 at 4:18 PM, Michael Havens bmi...@gmail.com wrote: Now, instead of the 'no route to host' error I get a 'connection refused'. I still can't ssh to the ubuntu machine. it times out. On Sun, Apr 1, 2012 at 4:08 PM, Lisa Kachold lisakach...@obnosis.comwrote: snip I was googling the 'no route to host' and found a suggestion to add a route that poimts to the routerr with the command 'sudo ip route add 192.168.1.0/24 dev eth0'. So I thought that sounded good but after I did not only could I not ssh out of the computer but I could no longer ssh into the computer. I then tried to remove the route with the command 'sudo ip route del 192.168.1.0/24 dev eth0', but that didn't help any. I just realized that the ip address is wrong my router is 192.168.0.1 but: sudo ip route add 192.168.0.1/24 dev eth0 RTNETLINK answers: Invalid argument A route add command is not persistent past a reboot or network restart. Mike, ONE of your systems is on your Wireless and the other is on the wired? Sometimes wireless to wired connections take longer than the timeout values for ssh or scp. Try putting them both on either wireless or wired and see if that's more successful? Timeouts could be why you get a no route to host. Verify that both boxes have a default route: # sudo netstat -rn Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more If you don't understand the output post it to the list. # apt-get install openssh-server sudo apt-get install openssh-server . . . openssh-server is already the newest version. openssh-server set to manually installed. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config there it is. PermitRootLogin yes Good! You can ssh to this host with root. If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/syslog bmike1@Michaels-PC:~$ sudo tail /var/log/messages;sudo tail /var/log/syslog tail: cannot open `/var/log/messages' for reading: No such file or directory Apr 1 13:09:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:14:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:17:01 Michaels-PC CRON[8219]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Apr 1 13:19:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:24:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:29:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:34:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:39:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:44:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' Apr 1 13:49:46 Michaels-PC ddclient[1763]: WARNING: file /etc/ddclient.conf, line 8: Invalid Value for keyword 'login' = '' bmike1@Michaels-PC:~$ What - are you running ddclient for? If you can't properly resolve DNS, you will not be able to ssh: Please see this link regarding your ddclient errors: http://www.linuxquestions.org/questions/linux-wireless-networking-41/wifi-connects-but-no-network-access-but-wired-works-880213/ Add this to
Re: ssh in network
A route add command is not persistent past a reboot or network restart. It seems to have been. I rebooted and still can't ssh from the laptop to the ubuntu. Mike, ONE of your systems is on your Wireless and the other is on the wired? Sometimes wireless to wired connections take longer than the timeout values for ssh or scp. Try putting them both on either wireless or wired and see if that's more successful? okay I just connected the laptop to the router via a wire but it still times out Timeouts could be why you get a no route to host. Verify that both boxes have a default route: # sudo netstat -rn Kernel IP routing table print server Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 Kernel IP routing table laptop Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 433/sshd ubuntu tcp0 0 0.0.0.0:139 0.0.0.0:* LISTEN 12243/smbd tcp0 0 0.0.0.0:445 0.0.0.0:* LISTEN 12243/smbd laptop Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more sudo locate Deny|more --no respose sudo locate iptables-save|more /sbin/iptables-save /usr/share/man/man8/iptables-save.8.gz What - are you running ddclient for? If you can't properly resolve DNS, you will not be able to ssh: I don't even know what ddclient is. It must have been started automatically by something. Please see this link regarding your ddclient errors: http://www.linuxquestions.org/questions/linux-wireless-networking-41/wifi-connects-but-no-network-access-but-wired-works-880213/ I went to the link and found nothing regarding the ddclient warning. It was only mentioned in the output of a poster tail command. Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). This is the hosts.allow file that I added. Does this look right? ALL : 127.0.0.1 sshd : 192.168.0.0/24, 192.168.0.1/24, 192.168.0.2/24, 192.168.0.3/24, 192.168.$ this goes on to x.y.z.10/24 #shows address to use from outside of network#, 78.207.132.32 No, you need that 78.207.132.32 on the SAME line with either ALL or sshd: or commented out. And 192.168.$ might cause problems. Change it to a safe entry: ---that wa snly mores output to say there was more to it. it goes on to x.y.z.10/24 oh. now I see the error of my ways. 192.168 is in the /16 network. silly me! cut here ALL : 127.0.0.1 sshd : 192.168.0.0/16, 78.207.132.32 http://192.168.0.0/24 ###end ### What is that 78.207.132.32 anyways? I know you say it is to connect to my network from elsewhere but how would I do that? would it be ssh 78.207.132.32:user@computer? make is already its current version # sudo apt-get update -it still says it is the newest version Also setup your /etc/hosts file on both servers following these suggestions: http://linux.about.com/od/commands/l/blcmdl5_hosts.htm Should look like this (except with all your hostnames on your network - be sure to put the same one on all your linux boxes): 127.0.0.1 localhost 192.168.1.10foo.mydomain.org foo 192.168.1.13bar.mydomain.org bar already done (file existed with the proper information. --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
Okay Are you colorblind? Knowing one's limitations is good. Now you can watch to make sure you follow each email thread and address each item; I have noticed you miss things frequently. Linux troubleshooting is very specific; be careful to read the full thread, and respond inline. Let's address each item until we resolve things: On Sun, Apr 1, 2012 at 5:49 PM, Michael Havens bmi...@gmail.com wrote: A route add command is not persistent past a reboot or network restart. It seems to have been. I rebooted and still can't ssh from the laptop to the ubuntu. But you couldn't also ssh **BEFORE you did the route add so these are two different things. Mike, ONE of your systems is on your Wireless and the other is on the wired? Sometimes wireless to wired connections take longer than the timeout values for ssh or scp. Try putting them both on either wireless or wired and see if that's more successful? okay I just connected the laptop to the router via a wire but it still times out Timeouts could be why you get a no route to host. Verify that both boxes have a default route: # sudo netstat -rn Kernel IP routing table print server Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 Good you have a default route via eth0. Kernel IP routing table laptop Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 You have a default route to the 192.168.0.1 network, but you also have 2 routes to both eth0 and wlan0 (wireless and wired): Take down your wlan (are you using wicd?) Try first to use your Gnome or KDE to take down the wireless. There are some known issues with wlan0 wireless slowness under Ubuntu: http://www.hitxp.com/articles/software/ubuntu-fix-slow-wireless-internet-connection-speed-upgrading-11-04-natty-narwhal/ Essentially power management turns it down by default, so we just enter: *# sudo iwconfig wlan0 power off* So, let's concentrate on wired for now: Leave it down for now, and just use your wired connection: So after you turn off the Wireless using your Network settings by right clicking the network wireless, enter at a terminal: # sudo /etc/init.d/networking restart Verify that both boxes have a listening ssh daemon: # sudo netstat -antp | grep 22 tcp0 0 0.0.0.0:22 0.0.0.0:* LISTEN 433/sshd ubuntu tcp0 0 0.0.0.0:139 0.0.0.0:* LISTEN 12243/smbd tcp0 0 0.0.0.0:445 0.0.0.0:* LISTEN 12243/smbd laptop Good you have sshd listening on port 22 on ubuntu. You do NOT have sshd (daemon) listening on your laptop. Be sure you have started it if you want to ssh to the laptop from ubuntu: # sudo /etc/init.d/ssh start In order to make sure ssh starts at boot in Ubuntu: # sudo update-rc.d ssh defaults Reference: https://help.ubuntu.com/community/UbuntuBootupHowto Make sure you haven't installed DenyHosts or iptables that limits your connections: # locate Deny |more # sudo iptables-save |more sudo locate Deny|more --no respose sudo locate iptables-save|more /sbin/iptables-save /usr/share/man/man8/iptables-save.8.gz enter # sudo iptables-save You are looking to see if your iptables is up and configured to firewall ssh. Dump the response in here. What - are you running ddclient for? If you can't properly resolve DNS, you will not be able to ssh: I don't even know what ddclient is. It must have been started automatically by something. ddclient is giving that error. Please see this link regarding your ddclient errors: http://www.linuxquestions.org/questions/linux-wireless-networking-41/wifi-connects-but-no-network-access-but-wired-works-880213/ Oops, sorry wrong link! ddclient is for opendns dynamic dns entries, that logs into your provider and resets a public ip when needed. Turn it down for now: *# sudo /etc/init.d/ddclient stop* Here's how to set it up (once you get ssh setup); it requires an opendns account. http://ubuntuforums.org/showthread.php?t=1264710 I went to the link and found nothing regarding the ddclient warning. It was only mentioned in the output of a poster tail command. Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside
Re: ssh in network
Sorry backwards; it should be hosts: files dns On Sun, Apr 1, 2012 at 7:28 PM, Lisa Kachold Check your /etc/nsswitch.conf file to be sure it has hosts: dns files wrong see above Reference: http://www.faqs.org/docs/securing/chap6sec71.html Then ping each server before trying to reconnect with ssh. I am pretty sure that this will work now that you have them both on the same network. Be sure you don't have any iptables running denying your port 22 on both servers! -- (503) 754-4452 Android (623) 239-3392 Skype (623) 688-3392 Google Voice ** it-clowns.com --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
On Sat, Mar 31, 2012 at 12:58 PM, Michael Havens bmi...@gmail.com wrote: That means you manually installed it. I did? Just remove it: # apt-get remove openssh-server # apt-get add openssh-server # /etc/init.d/ssh start Mike it looks like one of you systems is on the wireless and the other on the Wired. Yes, that is correct. Both connected to the modem Can you run on both servers: # apt-get install nmap Then on each server: # nmap -PN 192.168.0.3 # nmap -PN 192.168.0.4 and post that? bmike1@Michaels-PC:/etc/init.d$ sudo nmap -PN 192.168.0.3 Starting Nmap 5.21 ( http://nmap.org ) at 2012-03-31 12:38 MST Nmap scan report for 192.168.0.3 Host is up (0.45s latency). Not shown: 992 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 5800/tcp open vnc-http 5900/tcp open vnc Nmap done: 1 IP address (1 host up) scanned in 0.80 seconds bmike1@Michaels-PC:/etc/init.d$ sudo nmap -PN 192.168.0.4 Starting Nmap 5.21 ( http://nmap.org ) at 2012-03-31 12:38 MST Nmap scan report for Michaels-Laptop (192.168.0.4) Host is up (0.0076s latency). Not shown: 999 closed ports PORT STATE SERVICE 22/tcp open ssh MAC Address: 94:39:E5:11:B8:84 (Unknown) Nmap done: 1 IP address (1 host up) scanned in 1.94 seconds bmike1@Michaels-PC:/etc/init.d$ Michaels-Laptop ~ # The synaptic report is at 'a'. bmike1@Michaels-PC:~$ /etc/init.d/sshd start bash: /etc/init.d/sshd: No such file or directory bmike1@Michaels-PC:~$ ssh localhost ssh: connect to host localhost port 22: Connection refused bmike1@Michaels-PC:~$ # cd /etc/init.d/ # ls -al ssh* It's called /etc/init.d/ssh in Ubuntu https://help.ubuntu.com/10.04/serverguide/C/openssh-server.html bmike1@Michaels-PC:~$ cd /etc/init.d/ bmike1@Michaels-PC:/etc/init.d$ ls -al ssh* -rwxr-xr-x 1 root root 4194 2011-07-29 09:02 ssh bmike1@Michaels-PC:/etc/init.d$ cd ssh bash: cd: ssh: Not a directory bmike1@Michaels-PC:/etc/init.d$ sudo ssh start [sudo] password for bmike1: sat for five minutes ^Cbmike1@Michaels-PC:/etc/init.d$ Okay that's possibly a path issue. if you are in the directory you would enter: # sudo ./ssh start otherwise # sudo /etc/init.d/ssh start Oh... I forgot the './' Bummer! I thought this might make the ubuntu so that other machines could ssh into it but still connection times out. That means that the connection times out. Are you trying to ssh as root? Sometimes root is excluded from connecting via /etc/ssh/sshd_config? # grep Root /etc/ssh/sshd_config Okay, you can do (verify ssh): # /etc/init.d/ssh status or # netstat -antp |grep ssh or # ps -ef |grep ssh Try your connection again! # ssh yourname@targetprintserverip If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: # tail /var/log/messages # tail /var/log/secure Okay we see the ports open, so we don't have a firewall in the way. What is in your /etc/hosts.allow and /etc/hosts.deny on the ssh target? why did the sound stop working? Another problem that just started is the sound on the print server stopped working. I clicked on the speaker icon to turn it up and I see it is maxed. So then I clicked 'sound settings' and the output volume is maxed so I investigate the tabs. The first tab (hardware) has nothing in the 'choose a device to configure' window. So somehow the driver was removed (I guess). Which distro? Ubuntu (print server). Okay you can post to the Ubuntu boards, or google the exact *distro version*[uname -a] with your question and find a great number of people who have already answered your question. --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- (503) 754-4452 Android (623) 239-3392 Skype (623) 688-3392 Google Voice ** it-clowns.com --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
On Sat, Mar 31, 2012 at 1:21 PM, Lisa Kachold lisakach...@obnosis.comwrote: On Sat, Mar 31, 2012 at 12:58 PM, Michael Havens bmi...@gmail.com wrote: That means you manually installed it. I did? Just remove it: # apt-get remove openssh-server # apt-get add openssh-server # /etc/init.d/ssh start I just tried and those linux kernel updates for linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic still show up (and make me wait about 5 minutes for it to complete). (see 'a' at the end) After I removed it I tried the second command you gave me and it said 'command not found'. Then I tried to ssh out of the ubuntu but got the connection refused error, so I reinstalled it and could again.. Mike it looks like one of you systems is on the wireless and the other on the Wired. Yes, that is correct. Both connected to the modem That means that the connection times out. Are you trying to ssh as root? Sometimes root is excluded from connecting via /etc/ssh/sshd_config? I thought that was the only way to run ssh. # grep Root /etc/ssh/sshd_config --- 'root' not in file Okay, you can do (verify ssh): # /etc/init.d/ssh status or # netstat -antp |grep ssh or # ps -ef |grep ssh -- happily running ps -ef |grep ssh bmike11750 1717 0 Mar27 ?00:00:01 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu root 2607 1 0 13:51 ?00:00:00 /usr/sbin/sshd -D root 2942 29774 0 14:01 pts/300:00:00 grep --color=auto ssh root@Michaels-PC:/etc/init.d# Try your connection again! I can only ssh out of the ubuntu, (this is the step I figured out 'apt-get remove openssh-server' broke things # ssh yourname@targetprintserverip If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: # tail /var/log/messages --- no such file or directory # tail /var/log/secure --- no such file or directory Okay we see the ports open, so we don't have a firewall in the way. What is in your /etc/hosts.allow and /etc/hosts.deny on the ssh target? all lines are commented out., (see 'b' at end) Perhaps I should create an allowed range? from my investigation of the man page that would look like this: 192.168.0.0/255.255.255.245 (to allow for 10 units) is that correct? then I guess uncomment 'paranoid' in the deny file why did the sound stop working? Another problem that just started is the sound on the print server stopped working. I clicked on the speaker icon to turn it up and I see it is maxed. So then I clicked 'sound settings' and the output volume is maxed so I investigate the tabs. The first tab (hardware) has nothing in the 'choose a device to configure' window. So somehow the driver was removed (I guess). Which distro? Ubuntu (print server). Okay you can post to the Ubuntu boards, or google the exact *distro version* [uname -a] with your question and find a great number of people who have already answered your question. Thanks... I'll do just that! -a- apt-get remove openssh-server Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: openssh-server ssh 0 upgraded, 0 newly installed, 2 to remove and 3 not upgraded. 3 not fully installed or removed. After this operation, 938 kB disk space will be freed. Do you want to continue [Y/n]? Abort. root@Michaels-PC:/etc/init.d# apt-get remove openssh-server Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: openssh-server ssh 0 upgraded, 0 newly installed, 2 to remove and 3 not upgraded. 3 not fully installed or removed. After this operation, 938 kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 259861 files and directories currently installed.) Removing ssh ... Removing openssh-server ... ssh stop/waiting Processing triggers for ureadahead ... Processing triggers for ufw ... Processing triggers for man-db ... Setting up linux-image-3.0.0-15-generic (3.0.0-15.26) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic update-initramfs: Generating /boot/initrd.img-3.0.0-15-generic /etc/initramfs-tools/conf.d/resume.new: 1: GNU: not found run-parts: executing /etc/kernel/postinst.d/pm-utils 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.0.0-15-generic
Re: ssh in network
Mike: On Sat, Mar 31, 2012 at 2:44 PM, Michael Havens bmi...@gmail.com wrote: On Sat, Mar 31, 2012 at 1:21 PM, Lisa Kachold lisakach...@obnosis.comwrote: On Sat, Mar 31, 2012 at 12:58 PM, Michael Havens bmi...@gmail.comwrote: That means you manually installed it. I did? Just remove it: # apt-get remove openssh-server # apt-get add openssh-server # /etc/init.d/ssh start I just tried and those linux kernel updates for linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic still show up (and make me wait about 5 minutes for it to complete). (see 'a' at the end) After I removed it I tried the second command you gave me and it said 'command not found'. Okay sorry it's # apt-get install openssh-server Then I tried to ssh out of the ubuntu but got the connection refused error, so I reinstalled it and could again.. Mike it looks like one of you systems is on the wireless and the other on the Wired. Yes, that is correct. Both connected to the modem That means that the connection times out. Are you trying to ssh as root? Sometimes root is excluded from connecting via /etc/ssh/sshd_config? I thought that was the only way to run ssh. You run a ssh server and you use a ssh client as a user. # ssh myusername@targetserverIP # grep Root /etc/ssh/sshd_config --- 'root' not in file Make sure you used Root like # sudo grep Root /etc/ssh/sshd_config You should see it (after openssh-server is installed) just look if it says yes or no. Okay, you can do (verify ssh): # /etc/init.d/ssh status or # netstat -antp |grep ssh or # ps -ef |grep ssh -- happily running ps -ef |grep ssh bmike11750 1717 0 Mar27 ?00:00:01 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu root 2607 1 0 13:51 ?00:00:00 /usr/sbin/sshd -D root 2942 29774 0 14:01 pts/300:00:00 grep --color=auto ssh root@Michaels-PC:/etc/init.d# Try your connection again! I can only ssh out of the ubuntu, (this is the step I figured out 'apt-get remove openssh-server' broke things Okay: # apt-get install openssh-server /etc/init.d/ssh start # ssh yourname@targetprintserverip If the connection is seen on the host (but has some problem due to FQN (/etc/hosts) or /etc/hosts.allow files, it will be logged in either: Hmmm? Go look in var log and see what this system logs to: # sudo tail /var/log/messages # sudo tail /var/log/syslog # tail /var/log/messages --- no such file or directory # tail /var/log/secure --- no such file or directory Okay we see the ports open, so we don't have a firewall in the way. What is in your /etc/hosts.allow and /etc/hosts.deny on the ssh target? all lines are commented out., (see 'b' at end) Perhaps I should create an allowed range? from my investigation of the man page that would look like this: 192.168.0.0/255.255.255.245 (to allow for 10 units) is that correct? then I guess uncomment 'paranoid' in the deny file Add this to /etc/hosts.allow: /etc/hosts.allow looks: ALL : 127.0.0.1 sshd : 192.168.0.0/24, 78.207.132.32 This example shows an external address you might want to use to connect from outside your internal network (once you open or port forward port 22). Now the /etc/hosts.deny file: ALL : ALL why did the sound stop working? Another problem that just started is the sound on the print server stopped working. I clicked on the speaker icon to turn it up and I see it is maxed. So then I clicked 'sound settings' and the output volume is maxed so I investigate the tabs. The first tab (hardware) has nothing in the 'choose a device to configure' window. So somehow the driver was removed (I guess). Which distro? Ubuntu (print server). Okay you can post to the Ubuntu boards, or google the exact *distro version* [uname -a] with your question and find a great number of people who have already answered your question. Thanks... I'll do just that! Do this and your apt-get/aptitude will be fixed: # sudo apt-get install make -a- apt-get remove openssh-server Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: openssh-server ssh 0 upgraded, 0 newly installed, 2 to remove and 3 not upgraded. 3 not fully installed or removed. After this operation, 938 kB disk space will be freed. Do you want to continue [Y/n]? Abort. root@Michaels-PC:/etc/init.d# apt-get remove openssh-server Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: openssh-server ssh 0 upgraded, 0 newly installed, 2 to remove and 3 not upgraded. 3 not fully installed or removed. After this operation, 938 kB disk space will be freed.
Re: ssh in network
I spun up an ubuntu-desktop VM. At least the desktop distro does not have sshd installed. Try sudo apt-get install openssh--server I also noticed the ubuntu doesn't use v5 init scripts so I guess it's service ssh start, although after I installed it with the apt command above it was already running. On Thu, Mar 29, 2012 at 1:43 PM, Michael Havens bmi...@gmail.com wrote: Thanks for the help Mike. But it didn't work. bmike1@Michaels-PC:~$ sudo /etc/init.d/sshd start sudo: /etc/init.d/sshd: command not found I'm pretty dure that is because openssh-server Doesn't seem to be installed. I tried installing it but it won't install. I think it because it can't remove linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic On Thu, Mar 29, 2012 at 5:54 AM, Mike Ballon mike.bal...@gmail.com wrote: I don't have an ubuntu box to show output exactly, hopefully this will get you what you need just the same... type netstat -a | grep ssh on the print server host, you should get something like this: tcp 0 0 *:ssh *:* LISTEN If you don't see the output above, then ssh is not listen and you'll need to type sudo /etc/init.d/sshd start Try the netstat command again... If, in the first time running netstat you DID see the output, check your firewall by typing sudo /sbin/iptables -L | grep ssh, you should see something like this: ACCEPT tcp -- 10.0.0.0/8 anywhere state NEW tcp dpt:ssh If all that is correct the last thing to check is tcp wrappers, which probably are not as common as you once where, just cat out /etc/hosts.allow and /etc/hosts.deny for any related content. Cheers! On Tue, Mar 27, 2012 at 7:19 PM, Michael Havens bmi...@gmail.com wrote: Okay I figured out why the virtual (debian) couldn't ssh to the host (mint). I didn't have openssh-server installed in the mint. Now they are talking with each other nicely! Unfortunately I can't go from the either of those to the print-server (ubuntu). The errors given from both computers is 'connection timed out'. I can ssh from the ubuntu to to the debian and the mint with no problem. When I verified that openssh-server was installed on the ubuntu with apt it said: openssh-server is already the newest version. openssh-server set to manually installed. So I'm not too sure what that means. I think that is saying that the downloaddd package is the newest version but it isn't installed! If I'm correect on that point how do I install it and another question I have is how do I get it to load on boot? I think that installing it will take care of that but I just want to make sure. -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
Make that: Try sudo apt-get install openssh-server On Fri, Mar 30, 2012 at 6:07 AM, Mike Ballon mike.bal...@gmail.com wrote: I spun up an ubuntu-desktop VM. At least the desktop distro does not have sshd installed. Try sudo apt-get install openssh--server I also noticed the ubuntu doesn't use v5 init scripts so I guess it's service ssh start, although after I installed it with the apt command above it was already running. On Thu, Mar 29, 2012 at 1:43 PM, Michael Havens bmi...@gmail.com wrote: Thanks for the help Mike. But it didn't work. bmike1@Michaels-PC:~$ sudo /etc/init.d/sshd start sudo: /etc/init.d/sshd: command not found I'm pretty dure that is because openssh-server Doesn't seem to be installed. I tried installing it but it won't install. I think it because it can't remove linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic On Thu, Mar 29, 2012 at 5:54 AM, Mike Ballon mike.bal...@gmail.com wrote: I don't have an ubuntu box to show output exactly, hopefully this will get you what you need just the same... type netstat -a | grep ssh on the print server host, you should get something like this: tcp0 0 *:ssh *:* LISTEN If you don't see the output above, then ssh is not listen and you'll need to type sudo /etc/init.d/sshd start Try the netstat command again... If, in the first time running netstat you DID see the output, check your firewall by typing sudo /sbin/iptables -L | grep ssh, you should see something like this: ACCEPT tcp -- 10.0.0.0/8 anywherestate NEW tcp dpt:ssh If all that is correct the last thing to check is tcp wrappers, which probably are not as common as you once where, just cat out /etc/hosts.allow and /etc/hosts.deny for any related content. Cheers! On Tue, Mar 27, 2012 at 7:19 PM, Michael Havens bmi...@gmail.com wrote: Okay I figured out why the virtual (debian) couldn't ssh to the host (mint). I didn't have openssh-server installed in the mint. Now they are talking with each other nicely! Unfortunately I can't go from the either of those to the print-server (ubuntu). The errors given from both computers is 'connection timed out'. I can ssh from the ubuntu to to the debian and the mint with no problem. When I verified that openssh-server was installed on the ubuntu with apt it said: openssh-server is already the newest version. openssh-server set to manually installed. So I'm not too sure what that means. I think that is saying that the downloaddd package is the newest version but it isn't installed! If I'm correect on that point how do I install it and another question I have is how do I get it to load on boot? I think that installing it will take care of that but I just want to make sure. -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss -- Dazed_75 a.k.a. Larry Please protect my address like I protect yours. When sending messages to multiple recipients, always use the BCC: (Blind carbon copy) and not To: or CC:. Remove all addresses from the message body before sending a Forwarded message. This can prevent spy programs capturing addresses from the recipient list and message body. --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
Try sudo apt-get install openssh-server I've tried that and it won't install. I think it is because their are three packages in there that won't install (linux-image-3.0.0-15-generic, linux-image-3.0.0-16-generic, and linux-image-3.0.0-17-generic). How do I remove those packages? I just got a message from the gui update manager with instructions on maybe how to fix it (but it didn't) (a). The update manager was also talking about a distribution upgrade and needing to update three packages. I canceled out of that because the packages are all different versions and I don't want to do a distribution upgrade. -a- bmike1@Michaels-PC:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic 0 upgraded, 0 newly installed, 3 to remove and 3 not upgraded. 3 not fully installed or removed. After this operation, 351 MB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 246431 files and directories currently installed.) Removing linux-image-3.0.0-15-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic update-initramfs: Deleting /boot/initrd.img-3.0.0-15-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic /etc/default/grub: 1: GNU: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.0.0-15-generic.postrm line 328. dpkg: error processing linux-image-3.0.0-15-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.0.0-16-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-16-generic /boot/vmlinuz-3.0.0-16-generic update-initramfs: Deleting /boot/initrd.img-3.0.0-16-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-16-generic /boot/vmlinuz-3.0.0-16-generic /etc/default/grub: 1: GNU: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.0.0-16-generic.postrm line 328. dpkg: error processing linux-image-3.0.0-16-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.0.0-17-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic update-initramfs: Deleting /boot/initrd.img-3.0.0-17-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /etc/default/grub: 1: GNU: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.0.0-17-generic.postrm line 328. dpkg: error processing linux-image-3.0.0-17-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic E: Sub-process /usr/bin/dpkg returned an error code (1) bmike1@Michaels-PC:~$ On Fri, Mar 30, 2012 at 7:47 AM, Dazed_75 lthiels...@gmail.com wrote: Make that: Try sudo apt-get install openssh-server On Fri, Mar 30, 2012 at 6:07 AM, Mike Ballon mike.bal...@gmail.comwrote: I spun up an ubuntu-desktop VM. At least the desktop distro does not have sshd installed. Try sudo apt-get install openssh--server I also noticed the ubuntu doesn't use v5 init scripts so I guess it's service ssh start, although after I installed it with the apt command above it was already running. On Thu, Mar 29, 2012 at 1:43 PM, Michael Havens bmi...@gmail.com wrote: Thanks for the help Mike. But it didn't work. bmike1@Michaels-PC:~$ sudo /etc/init.d/sshd start sudo: /etc/init.d/sshd: command not found I'm pretty dure that is because openssh-server Doesn't seem to be installed. I tried installing it but it won't install. I think it because it can't remove linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic On Thu, Mar 29, 2012 at 5:54 AM, Mike Ballon mike.bal...@gmail.com wrote: I don't have an ubuntu box to show output exactly, hopefully this will get you
Re: ssh in network
Lets try the other route; what is your output to dpkg --get-selections | grep openssh ? Also post the output of dpkg --get-selections | grep linux-image just for fun. On Fri, Mar 30, 2012 at 11:49 AM, Michael Havens bmi...@gmail.com wrote: Try sudo apt-get install openssh-server I've tried that and it won't install. I think it is because their are three packages in there that won't install (linux-image-3.0.0-15-generic, linux-image-3.0.0-16-generic, and linux-image-3.0.0-17-generic). How do I remove those packages? I just got a message from the gui update manager with instructions on maybe how to fix it (but it didn't) (a). The update manager was also talking about a distribution upgrade and needing to update three packages. I canceled out of that because the packages are all different versions and I don't want to do a distribution upgrade. -a- bmike1@Michaels-PC:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic 0 upgraded, 0 newly installed, 3 to remove and 3 not upgraded. 3 not fully installed or removed. After this operation, 351 MB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 246431 files and directories currently installed.) Removing linux-image-3.0.0-15-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic update-initramfs: Deleting /boot/initrd.img-3.0.0-15-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-15-generic /boot/vmlinuz-3.0.0-15-generic /etc/default/grub: 1: GNU: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.0.0-15-generic.postrm line 328. dpkg: error processing linux-image-3.0.0-15-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.0.0-16-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-16-generic /boot/vmlinuz-3.0.0-16-generic update-initramfs: Deleting /boot/initrd.img-3.0.0-16-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-16-generic /boot/vmlinuz-3.0.0-16-generic /etc/default/grub: 1: GNU: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.0.0-16-generic.postrm line 328. dpkg: error processing linux-image-3.0.0-16-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Removing linux-image-3.0.0-17-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic update-initramfs: Deleting /boot/initrd.img-3.0.0-17-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /etc/default/grub: 1: GNU: not found run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.0.0-17-generic.postrm line 328. dpkg: error processing linux-image-3.0.0-17-generic (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.0.0-15-generic linux-image-3.0.0-16-generic linux-image-3.0.0-17-generic E: Sub-process /usr/bin/dpkg returned an error code (1) bmike1@Michaels-PC:~$ On Fri, Mar 30, 2012 at 7:47 AM, Dazed_75 lthiels...@gmail.com wrote: Make that: Try sudo apt-get install openssh-server On Fri, Mar 30, 2012 at 6:07 AM, Mike Ballon mike.bal...@gmail.com wrote: I spun up an ubuntu-desktop VM. At least the desktop distro does not have sshd installed. Try sudo apt-get install openssh--server I also noticed the ubuntu doesn't use v5 init scripts so I guess it's service ssh start, although after I installed it with the apt command above it was already running. On Thu, Mar 29, 2012 at 1:43 PM, Michael Havens bmi...@gmail.com wrote: Thanks for the help Mike. But it didn't work. bmike1@Michaels-PC:~$ sudo /etc/init.d/sshd start sudo: /etc/init.d/sshd: command not found I'm pretty dure that is because openssh-server Doesn't seem to be installed. I tried installing it but it
Re: ssh in network
dpkg --get-selections | grep openssh openssh-clientinstall openssh-serverdeinstall dpkg --get-selections | grep linux-image linux-image-3.0.0-12-genericinstall linux-image-3.0.0-14-genericinstall linux-image-3.0.0-15-genericdeinstall linux-image-3.0.0-16-genericdeinstall linux-image-3.0.0-17-genericdeinstall On Fri, Mar 30, 2012 at 9:08 AM, Mike Ballon mike.bal...@gmail.com wrote: Lets try the other route; what is your output to dpkg --get-selections | grep openssh ? Also post the output of dpkg --get-selections | grep linux-image just for fun. On Fri, Mar 30, 2012 at 11:49 AM, Michael Havens bmi...@gmail.com wrote: Try sudo apt-get install openssh-server I've tried that and it won't install. I think it is because their are three packages in there that won't install (linux-image-3.0.0-15-generic, linux-image-3.0.0-16-generic, and linux-image-3.0.0-17-generic). How do I remove those packages? --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
you know... I am having such problems that I think I should just reinstall everything. What do you think? On Fri, Mar 30, 2012 at 10:07 AM, Michael Havens bmi...@gmail.com wrote: dpkg --get-selections | grep openssh openssh-clientinstall openssh-serverdeinstall dpkg --get-selections | grep linux-image linux-image-3.0.0-12-genericinstall linux-image-3.0.0-14-genericinstall linux-image-3.0.0-15-genericdeinstall linux-image-3.0.0-16-genericdeinstall linux-image-3.0.0-17-genericdeinstall On Fri, Mar 30, 2012 at 9:08 AM, Mike Ballon mike.bal...@gmail.comwrote: Lets try the other route; what is your output to dpkg --get-selections | grep openssh ? Also post the output of dpkg --get-selections | grep linux-image just for fun. On Fri, Mar 30, 2012 at 11:49 AM, Michael Havens bmi...@gmail.com wrote: Try sudo apt-get install openssh-server I've tried that and it won't install. I think it is because their are three packages in there that won't install (linux-image-3.0.0-15-generic, linux-image-3.0.0-16-generic, and linux-image-3.0.0-17-generic). How do I remove those packages? -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
I'd say yes, not sure why there are two linux-image packages. Of course I'm not an ubuntu expert You can try to download the deb package yourself and install with dpkg with a --force for a last ditch effort. There is always grabbing the tarball and installing from source as well :) On Fri, Mar 30, 2012 at 2:25 PM, Michael Havens bmi...@gmail.com wrote: you know... I am having such problems that I think I should just reinstall everything. What do you think? On Fri, Mar 30, 2012 at 10:07 AM, Michael Havens bmi...@gmail.com wrote: dpkg --get-selections | grep openssh openssh-client install openssh-server deinstall dpkg --get-selections | grep linux-image linux-image-3.0.0-12-generic install linux-image-3.0.0-14-generic install linux-image-3.0.0-15-generic deinstall linux-image-3.0.0-16-generic deinstall linux-image-3.0.0-17-generic deinstall On Fri, Mar 30, 2012 at 9:08 AM, Mike Ballon mike.bal...@gmail.com wrote: Lets try the other route; what is your output to dpkg --get-selections | grep openssh ? Also post the output of dpkg --get-selections | grep linux-image just for fun. On Fri, Mar 30, 2012 at 11:49 AM, Michael Havens bmi...@gmail.com wrote: Try sudo apt-get install openssh-server I've tried that and it won't install. I think it is because their are three packages in there that won't install (linux-image-3.0.0-15-generic, linux-image-3.0.0-16-generic, and linux-image-3.0.0-17-generic). How do I remove those packages? -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
Re: ssh in network
I don't have an ubuntu box to show output exactly, hopefully this will get you what you need just the same... type netstat -a | grep ssh on the print server host, you should get something like this: tcp0 0 *:ssh *:* LISTEN If you don't see the output above, then ssh is not listen and you'll need to type sudo /etc/init.d/sshd start Try the netstat command again... If, in the first time running netstat you DID see the output, check your firewall by typing sudo /sbin/iptables -L | grep ssh, you should see something like this: ACCEPT tcp -- 10.0.0.0/8 anywherestate NEW tcp dpt:ssh If all that is correct the last thing to check is tcp wrappers, which probably are not as common as you once where, just cat out /etc/hosts.allow and /etc/hosts.deny for any related content. Cheers! On Tue, Mar 27, 2012 at 7:19 PM, Michael Havens bmi...@gmail.com wrote: Okay I figured out why the virtual (debian) couldn't ssh to the host (mint). I didn't have openssh-server installed in the mint. Now they are talking with each other nicely! Unfortunately I can't go from the either of those to the print-server (ubuntu). The errors given from both computers is 'connection timed out'. I can ssh from the ubuntu to to the debian and the mint with no problem. When I verified that openssh-server was installed on the ubuntu with apt it said: openssh-server is already the newest version. openssh-server set to manually installed. So I'm not too sure what that means. I think that is saying that the downloaddd package is the newest version but it isn't installed! If I'm correect on that point how do I install it and another question I have is how do I get it to load on boot? I think that installing it will take care of that but I just want to make sure. -- :-)~MIKE~(-: --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss