Bâches imprimées, chevalets - moins chers, plus vite
Dij` disponible 2 jours aprhs la commande Impression HD - encres risistantes aux UV 4 supports d'impression au choix 8 finitions (oeillets, renforts du bord, etc) Upload immidiat de vos fichiers ou transfert diffiri Commandez online en 5 minutes BILITE INDOOR/ BILITE OUTDOOR Structures auto-portantes de tension de toile destinies ` l'usage intirieur ou extirieur. Construction en aluminium. 14 modhles disponibles. Utilisation en recto ou en recto verso. Installation en 1 heure ` 1 personne en intirieur et ` 2 personnes en extirieur. STOP-TROTTOIRS Plusieurs modhles disponibles. Lestage du pied pour une grande risistance au vent. 2 roulettes sous le pied facilite le diplacement du dispositif. CHEVALETS Disponible en formats A2 et A1. Assure une communication recto verso. S'installe aisiment. Stabilisi par deux charnihres. VEDI express ) 2002-2012 Rollup, Pop Up, bbches, stands parapluie aux meilleurs prix et dans les meilleurs dilais. Powered by VEDI ne plus recevoir nos newsletters Fichiers acceptis Taille des images : Pour Pop Up 3x3m : - Image 337,5x222cm : fichier 337,5x222cm Pour Pop Up 4x3m : - Image 405x222cm : fichier 405x222cm Risolutions conseillies: PDF: 80 dpi avec typo vectorisie TIFF ou JPEG: 120 dpi Format des fichiers acceptis : PDF HD, EPS (avec polices et images incorpories et vectorisies), TIFF, JPEG Respect des couleurs : De prifirence, fournir les fichiers en CMYK (noir quadri: C70 M70 Y70 K100). Les fichiers RGB seront convertis. Garanties de qualiti Qualiti d'impression : Impression HD : vos images sont toujours imprimies en haute difinition. Couleurs vivantes et respecties : La gestion des couleurs et la garantie de rendu sont assuriespar notre iquipe d'infographistes et d'imprimeurs professionnels expirimentis. Encres UV risistantes : Les encres utilisies pour l'impression de votre image sont toujours des encres risistantes aux rayons ultra violets. Ces encres de qualiti garantissent une bonne longiviti aux couleurs de votre visuel, pour une image toujours vive. Supports de qualiti : Vos images sont imprimies sur support satini, pour un meilleur rendu des couleurs et des contrastes. D'une ipaisseur de 170 5m ou supirieure, nos supports d'impression vous garantissent une image qui ne gondole pas et offrent une protection contre les griffes et les poussihres. Risistants aux dichirures et ` l'eau, ils peuvent se nettoyer. Images anti-feu : Vos images peuvent jtre imprimies sur support ignifugi B2 / M1 (en option), idial et mjme parfois obligatoire pour les foires et salons. Qualiti : Structure solide : iliments construits en acier peint de section 20cm x 20 cm. Simple ` monter : assemblage sans outil, montage en 30 minutes ` deux personnes. Idial pour la participation ` vos salons grand public ou professionnels. La structure Wave permet de construire des stands dune multitude de dimensions. Les images murales sont fournies roulies avec une barre de suspension intigri (Veclip). Elles se suspendent au montant horizontal supirieur du stand et se diroulent de haut en bas entre les piliers. Leur largeur est de maximum 2 mhtres afin de faciliter le stockage et le transport. Il existe 4 largeurs (50, 100, 150 et 200 cm) et 2 hauteurs (220 cm pour les stands de 2m50 et 290cm pour les stand de 3m20). Mises dos ` dos, elles permettent laffichage recto-verso. Vous choisissez vous-mjme les diffirentes largeurs de sorte de combler complhtement un ctti du stand ou de laisser un passage. La largeur disponible pour limage est igale ` la largeur du stand moins 50 cm. Par exemple: si la largeur du ctti du stand ` fermer est de 5 mhtres, la largeur disponible pour limage est de 450cm. Pour combler cette largeur, vous pouvez commander 2 images de 200cm et 1 image de 50cm. Si la hauteur de votre stand est de 320 cm, vous choisirez une hauteur dimage de 290 cm. Production et livraison : Livraison express : votre stand livri, prjt ` monter en 5 jours ouvrables. Conditions ginirales de ventes Giniralitis Seules les prisentes conditions de vente sont dapplication pour la vente. Ces conditions ginirales s'appliquent ` lexclusion de toutes autres conditions, mjme celles reprises sur des bons de commande imanant de lacheteur. Le vendeur se riserve le droit de modifier ` tout moment ces conditions ginirales. Nianmoins, les commandes en cours restent soumises aux conditions applicables au moment oy la vente a iti conclue. Les photos, illustrations, couleurs et textes associis aux produits repris sur ce site nont pas de caracthre contractuel et de ce fait ne sauraient engager la responsabiliti du vendeur. Toute commande donnera lieu ` une facturation 30 jours aprhs son acceptation dans le cas oy la commande ne peut jtre exicutie en raison d'un retard imputable au client. En cas d'annulation de sa commande, le client sera redevable d'un montant correspondant aux frais dij` exposi, augmenti d'une indemniti de 15 % du montant commandi. La facture sera itablie ` la sociiti
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:19:51 Modified files: www/trac : Makefile distinfo Log message: update to trac 0.12.3
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:20:11 Modified files: www/chive : Makefile distinfo www/chive/pkg : PLIST Log message: update to chive 1.0.2
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:19:30 Modified files: www/horde/dimp : Makefile distinfo www/horde/horde: Makefile distinfo www/horde/horde/pkg: PLIST www/horde/imp : Makefile distinfo Log message: update to new dimp/horde/imp
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:21:58 Modified files: geo/mapserver : Makefile distinfo Log message: update to mapserver 6.0.2, SECURITY and other fixes, ok landry@ http://lists.osgeo.org/pipermail/mapserver-users/2012-February/071476.html
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: lan...@cvs.openbsd.org 2012/02/16 14:22:42 Modified files: databases/mongodb: Makefile Log message: It's pointless to add BROKEN-* on each and every arch when the code has an explicit #if (defined(__i386__) || defined(__x86_64__)) #else #error. Mark as ONLY_FOR_ARCHS accordingly.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:25:08 Modified files: telephony/asterisk: Makefile distinfo Log message: update to asterisk 1.8.9.2 - fixes deadlock in chan_agent, crash in ParkAndAnnounce, and SIP INFO DTMF handling for non-numeric codes
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:26:55 Modified files: net/spectrum-tools: Makefile distinfo net/spectrum-tools/patches: patch-spectool_net_client_h Added files: net/spectrum-tools/patches: patch-spectool_net_server_c Removed files: net/spectrum-tools/patches: patch-wispy_hw_dbx_c Log message: update to spectrum-tools 2011-08-R1 maintainer timeout tested with wi-spy 2.4i (which only works correctly with rthreads)
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: lan...@cvs.openbsd.org 2012/02/16 14:27:37 Modified files: databases/leveldb: Makefile Log message: It's pointless to add BROKEN-* for each and every arch when the code explicitely checks for i386/amd64/arm and #errors out otherwise. Mark as ONLY_FOR_ARCHS accordingly.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: pas...@cvs.openbsd.org 2012/02/16 14:30:15 Modified files: lang/gcc/4.6 : Makefile lang/gcc/4.6/patches: patch-gcc_configure Added files: lang/gcc/4.6/patches: patch-gcc_common_opt patch-gcc_fortran_f95-lang_c patch-gcc_go_go-lang_c patch-gcc_java_lang_c patch-gcc_lto_lto_c patch-gcc_targhooks_c patch-gcc_toplev_c Log message: - modify stack protection to work with our native libc routines, passing the function name to __stack_smash_handler. Only supported for c-family languages at the moment. - enable it per default on archs where FRAME_GROWS_DOWNWARD - remove obsolete comment about adastrap needing a specific libc - -java actually needs a runtime dep on -main for -lgcc ok espie@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: st...@cvs.openbsd.org 2012/02/16 14:36:08 Modified files: net/samba : Makefile distinfo net/samba/patches: patch-Makefile_in Removed files: net/samba/patches: patch-lib_substitute_c patch-smbd_server_c Log message: Update to samba 3.6.3; various bugfixes. From maintainer Ian McWilliam, also tested by nigel@. This rolls in the DoS fix which we previously handled via a patch.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: lan...@cvs.openbsd.org 2012/02/16 14:36:03 Modified files: audio/gmpc : Makefile Added files: audio/gmpc/patches: patch-glade_playlist3_ui patch-src_playlist3_c Log message: Fix icon warnings upon startup, play/stop/prev/next buttons were broken. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=646822 http://repo.or.cz/w/gmpc.git/commit/ced4f26e053bff5bb04205f623a179fc97fdfe52
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: lan...@cvs.openbsd.org 2012/02/16 14:59:17 Modified files: plan9/drawterm : Makefile Log message: Set ONLY_FOR_ARCHS according to list of archs there's MD code for.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:08:39 Modified files: devel/glib2: Makefile Added files: devel/glib2/patches: patch-gio_kqueue_kqueue-thread_c Log message: Only continue when kevent() fails when we get EINTR; and return NULL otherwise. This prevent the calling process to go into a loop.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:09:14 Modified files: x11/gtk+2 : Makefile distinfo x11/gtk+2/patches: patch-configure patch-gtk_Makefile_in x11/gtk+2/pkg : PLIST-docs Removed files: x11/gtk+2/patches: patch-modules_printbackends_cups_gtkprintbackendcups_c Log message: Update to gtk+2-2.24.10.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:09:37 Modified files: textproc/intltool: Makefile distinfo textproc/intltool/patches: patch-intltool_m4 Log message: Update to intltool-0.50.1.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:10:35 Modified files: www/libcroco : Makefile distinfo www/libcroco/pkg: PLIST Log message: Update to libcroco-0.6.4. Add to the textproc category while here.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:10:59 Modified files: print/gstoraster: Makefile print/gstoraster/pkg: DESCR Log message: Fix DESCR.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:12:08 Modified files: print/cups : Makefile distinfo print/cups/patches: patch-Makedefs_in patch-config-scripts_cups-common_m4 patch-cups_http_c patch-filter_Makefile patch-scheduler_ipp_c print/cups/pkg : PLIST README cupsd.rc Added files: print/cups/patches: patch-backend_ipp_c patch-scheduler_log_c patch-scheduler_main_c Removed files: print/cups/patches: patch-cgi-bin_admin_c patch-filter_image-gif_c patch-scheduler_cups-driverd_cxx Log message: Update to cups-1.5.2. While here, create cups's printcap under /etc/cups/ because we are running unpriviledged so we cannot touch /etc/printcap. Tweak rc script accordingly.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:13:05 Modified files: print/a2ps : Makefile print/a2ps/pkg : PLIST Log message: Drop all FLAVORs except for a4. Uses letter size by default. ok sthen@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:12:41 Modified files: textproc/gtranslator: Makefile distinfo textproc/gtranslator/patches: patch-man_Makefile_in textproc/gtranslator/pkg: PLIST Removed files: textproc/gtranslator/patches: patch-configure patch-src_gtr-utils_c Log message: Unbreak by updating to gtranslator-2.90.8.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:13:24 Modified files: print/psutils : Makefile print/psutils/pkg: PLIST Log message: Drop all FLAVORs except for a4. Uses letter size by default. ok sthen@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:13:45 Modified files: print/mpage: Makefile print/mpage/pkg: PLIST Log message: Drop all FLAVORs except for a4. Uses letter size by default. ok sthen@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:14:33 Modified files: print/libpaper : Makefile distinfo Log message: Update to libpaper-1.1.24.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:15:01 Modified files: net/libepc : Makefile distinfo Log message: Minor update to libepc-0.4.4. * Correct the libepc-1.0 pkg-config file to mention gnutls
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:16:02 Modified files: devel/libsoup : Makefile Log message: From upstream: SoupHTTPInputStream: don't burn through GCancellable fds (i.e. stop eating all those FDs) ok landry@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:16:50 Added files: devel/libsoup/patches: patch-libsoup_soup-http-input-stream_c Log message: Missed in previous.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:17:38 Modified files: x11/gnome/gvfs : Makefile x11/gnome/gvfs/patches: patch-config_h_in Added files: x11/gnome/gvfs/patches: patch-daemon_gvfsjobunmount_c Removed files: x11/gnome/gvfs/patches: patch-daemon_gvfsbackendftp_c Log message: Sync some patches with upstream.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:18:06 Modified files: mail/zarafa/libvmime: Makefile distinfo mail/zarafa/libvmime/patches: patch-Makefile_in patch-configure patch-src_Makefile_in patch-vmime_Makefile_in Log message: Update to zarafa-libvmime-0.9.2.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:19:04 Modified files: x11/gnome/totem: Makefile x11/gnome/totem/pkg: PLIST-main Log message: Missing @pkgpath marker, spotted by Mikolaj Kucharski.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:18:36 Modified files: mail/zarafa: Makefile.inc mail/zarafa/zarafa: Makefile distinfo mail/zarafa/zarafa/patches: patch-common_Makefile_in patch-configure patch-doc_Makefile_in patch-doc_manual_xml patch-installer_linux_ldap_openldap_cfg patch-libfreebusy_Makefile_in patch-provider_client_Makefile_in patch-provider_libserver_ECDatabaseUtils_cpp patch-provider_libserver_ZarafaCmd_cpp patch-provider_server_ECServer_cpp patch-provider_server_Makefile_in patch-spooler_Makefile_in mail/zarafa/zarafa/pkg: PLIST-main Added files: mail/zarafa/zarafa/patches: patch-ECtools_zarafa-indexer_ECFileIndex_cpp patch-ECtools_zarafa-indexer_zarafa-indexer_cpp patch-provider_contacts_Makefile_in Log message: Update to zarafa 7.0.5. Detailed changelog: http://download.zarafa.com/community/final/7.0/final-changelog-7.0.txt
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:19:27 Modified files: lang/vala : Makefile distinfo lang/vala/pkg : PLIST Log message: Update to vala-0.14.2.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:20:26 Modified files: editors/subtitleeditor: Makefile distinfo editors/subtitleeditor/pkg: PLIST Added files: editors/subtitleeditor/patches: patch-plugins_actions_documentsnavigation_documentsnavigation_cc Removed files: editors/subtitleeditor/patches: patch-src_cfg_cc patch-src_extension_action_cc patch-src_extensionmanager_cc Log message: Update to subtitleeditor-0.39.0.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:20:02 Modified files: x11/gnome/tracker: Makefile distinfo x11/gnome/tracker/patches: patch-src_tracker-extract_tracker-extract-mp3_c x11/gnome/tracker/pkg: PLIST-main Removed files: x11/gnome/tracker/patches: patch-src_libtracker-common_tracker-file-utils_c patch-src_libtracker-common_tracker-file-utils_h patch-src_miners_fs_tracker-config_c patch-src_tracker-extract_tracker-extract-abw_c patch-src_tracker-extract_tracker-extract-gif_c patch-src_tracker-extract_tracker-extract-pdf_c patch-src_tracker-extract_tracker-extract-text_c patch-src_tracker-extract_tracker-extract-tiff_c patch-src_tracker-extract_tracker-extract-xmp_c Log message: Update to version 0.12.10. Missing @pkgpath marker, spotted by Mikolaj Kucharski.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:20:54 Modified files: net/gupnp/dlna : Makefile distinfo net/gupnp/dlna/pkg: PLIST Log message: Update to gupnp-dlna-0.6.5.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:21:54 Modified files: x11/gnome : gnome.port.mk Log message: Extend comment about yelp.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:21:16 Modified files: net/gupnp/vala : Makefile distinfo Log message: Update to gupnp-vala-0.10.3.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:22:44 Modified files: misc/shared-mime-info: Makefile distinfo Log message: Update to shared-mime-info-1.0.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:23:43 Modified files: x11/gnome/glom : Makefile distinfo Log message: Update to glom-1.20.9.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:24:15 Modified files: games/gbrainy : Makefile distinfo Log message: Update to gbrainy-2.1.1. ok kevlo@ (maintainer)
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:23:25 Modified files: x11/gnome/session: Makefile x11/gnome/session/patches: patch-gnome-session_main_c Log message: No need to increase openfiles anymore.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:24:34 Modified files: x11/gnome/file-roller: Makefile x11/gnome/file-roller/pkg: PLIST-main Log message: Missing @pkgpath marker, spotted by Mikolaj Kucharski.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:26:22 Modified files: print/foomatic-db-engine: Makefile Log message: Better MASTER_SITES.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:25:19 Modified files: sysutils/deja-dup: Makefile sysutils/deja-dup/pkg: PLIST Log message: Properly install help files where they belong so that yelp can find them.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:27:56 Modified files: mail/mailman : Makefile mail/mailman/pkg: PLIST Log message: No need for HOMEDIR to be group writable.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:26:48 Modified files: x11/gnome/libxklavier: Makefile distinfo Removed files: x11/gnome/libxklavier/patches: patch-libxklavier_Makefile_in Log message: Update to libxklavier-5.2.1.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:27:36 Modified files: net/miniupnp/minissdpd: Makefile distinfo net/miniupnp/minissdpd/patches: patch-Makefile Removed files: net/miniupnp/minissdpd/patches: patch-ifacewatch_c Log message: Update to minissdpd-1.1.20120121.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:25:47 Modified files: x11/gnome/controlcenter: Makefile x11/gnome/controlcenter/patches: patch-panels_info_cc-info-panel_c patch-panels_user-accounts_Makefile_in Added files: x11/gnome/controlcenter/patches: patch-panels_sound_gvc-mixer-dialog_c patch-panels_sound_gvc-stream-status-icon_c patch-panels_user-accounts_um-user_c Log message: Implement user passwd change by admin users. Prevent a couple of implicit declarations.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:27:14 Modified files: net/miniupnp/miniupnpd: Makefile distinfo net/miniupnp/miniupnpd/patches: patch-Makefile patch-miniupnpd_conf patch-pf_obsdrdr_c Removed files: net/miniupnp/miniupnpd/patches: patch-bsd_getifstats_c patch-genconfig_sh patch-getifaddr_c patch-upnphttp_c patch-upnppermissions_c patch-upnpsoap_c Log message: Updtae to miniupnpd-1.6.20120207.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:28:23 Modified files: sysutils/polkit: Makefile distinfo sysutils/polkit/patches: patch-configure_ac patch-src_polkitbackend_polkitbackendlocalauthority_c sysutils/polkit/pkg: PLIST Added files: sysutils/polkit/patches: patch-Makefile_am patch-src_polkitbackend_polkitbackendlocalauthorizationstore_c Removed files: sysutils/polkit/patches: patch-docs_man_pklocalauthority_xml patch-docs_polkit_html_pklocalauthority_8_html patch-src_polkitbackend_Makefile_am Log message: Update to polkit-0.104.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:29:15 Modified files: graphics/sane-backends: Makefile graphics/sane-backends/pkg: README Added files: graphics/sane-backends/patches: patch-tools_openbsd_attach patch-tools_openbsd_detach Log message: Extend DESCR and tweak hotplugd(8) scripts accordingly.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:31:43 Modified files: devel/py-gobject3: Makefile distinfo Log message: Update to py-gobject3-3.0.4.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:31:16 Modified files: print : Makefile Log message: Set proper FLAVORs after recent changes to a2ps, psutils and mpage.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:32:42 Removed files: emulators/openmsx: patch-build_cpu_py Log message: Remove bogus patch.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:33:41 Modified files: x11/kde/graphics3: Makefile x11/kde/office3: Makefile Log message: Drop dependency on libpaper (which is really a Debian thing). Regen WANTLIB.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:35:04 Modified files: net: Makefile Log message: -libbind
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:34:40 Removed files: net/libbind: Makefile distinfo net/libbind/pkg: DESCR PFRAG.shared PLIST Log message: Remove this useless oldie. ok jakob@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:35:57 Modified files: multimedia/ffmpeg2theora: Makefile Log message: Remove USE_GROFF, from Brad.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: pas...@cvs.openbsd.org 2012/02/16 15:34:34 Modified files: sysutils/pv: Makefile distinfo sysutils/pv/patches: patch-autoconf_make_unreal_mk Log message: Update to 1.2.0. Doesn't need groff. ok sthen@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:46:39 Modified files: x11/gnome/video-arcade: Makefile distinfo Log message: Update to gnome-video-arcade-0.8.3.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: piro...@cvs.openbsd.org 2012/02/16 16:03:15 Modified files: math/ccolamd : Makefile distinfo Log message: Update to ccolamd 2.7.4. Okay ajacoutot@.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: piro...@cvs.openbsd.org 2012/02/16 16:29:11 Modified files: math/ginac : Makefile distinfo Log message: Update to GiNaC 1.6.2. Okay ajacoutot@.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: piro...@cvs.openbsd.org 2012/02/16 16:35:49 Modified files: devel/ruby-debug: Makefile Log message: Drop maintainership.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: j...@cvs.openbsd.org2012/02/16 23:59:41 Modified files: games/scummvm : Makefile distinfo games/scummvm/patches: patch-configure Log message: update to 1.4.1 and stop the configure script from adding -pedantic to CXXFLAGS as this hard errored on the long long in ogg headers resulting in a binary with no vorbis/flac support.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 23:59:46 Modified files: devel/sdl : Makefile Added files: devel/sdl/patches: patch-src_cpuinfo_SDL_cpuinfo_c Log message: Re-enable altivec. from Brad, tested by myself
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:31:26 Modified files: databases/sqlports/files: mksqlitedb Log message: make sure we don't pass FLAVOR/SUBPACKAGE info thru subdirs. count number of passes (purely cosmetic)
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:33:05 Modified files: infrastructure/mk: bsd.port.mk Log message: scrap old fetch targets add a warning when LIB_DEPENDS doesn't register (for sthen@) tweak FLAVOR message for consistency
Re: CVS: cvs.openbsd.org: ports
On Thu, Feb 16, 2012 at 03:16:02PM -0700, Antoine Jacoutot wrote: CVSROOT: /cvs Module name: ports Changes by: ajacou...@cvs.openbsd.org 2012/02/16 15:16:02 Modified files: devel/libsoup : Makefile Log message: From upstream: SoupHTTPInputStream: don't burn through GCancellable fds (i.e. stop eating all those FDs) ok landry@ Fwiw, this fixes all webkit browsers which were previously crashing with Creating pipes for GWakeup: Too many open files, as can be seen in https://bugzilla.gnome.org/show_bug.cgi?id=668508. Yay!
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:36:09 Modified files: infrastructure/lib/DPB: Fetch.pm Log message: cosmetic: fetches come in, so explain waiting time better.
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:35:42 Modified files: infrastructure/bin: dpb infrastructure/lib/DPB: Heuristics.pm Log message: allow weights to be scaled add longer traceback in case we die
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:40:35 Modified files: infrastructure/mk: pkgpath.mk Log message: kill fetch-makefile here too
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:41:22 Modified files: infrastructure/mk: bsd.port.subdir.mk Log message: prevent top-subdirs from ignoring flavor and subpackage markers
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: es...@cvs.openbsd.org 2012/02/17 00:42:20 Modified files: infrastructure/man/man1: dpb.1 Log message: cosmetic
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: bent...@cvs.openbsd.org 2012/02/17 00:42:25 Modified files: comms/bottlerocket: Makefile Log message: Update homepage. Current homepage for comms/bottlerocket is dead. Last entry in the web archive was we've moved to this location. ok ajacoutot@ gsoares@
CVS: cvs.openbsd.org: ports
CVSROOT:/cvs Module name:ports Changes by: ajacou...@cvs.openbsd.org 2012/02/17 00:45:10 Modified files: print/cups : Makefile print/cups/patches: patch-config-scripts_cups-pdf_m4 Log message: Make sure we use ghostscript as pdftops interpreter but do _not_ depend on it being installed at build time (cyclic dependency). breakage reported by nigel@
Hoje tem Rodízio de Sushi no Sushi Mania com Entrada e acompanha YakiSobá - Aproveite esta Super Oferta!
[IMAGE] Não desejo mais receber estes e-mails.
Firefox 9.0.1 crashing when printing
Hi ports@, as part of the test process that takes place before each release, Firefox 9.0.1 closes with no messages when trying to print to a printer connected remotely. $ firefox $ echo $? 11 $ Firefox crashing when printing is not a new problem, but didn't find anything related to 9.0.1 in archives. Some details: The printer is a HP Color Laserjet 2605, connected via lpd, using print/cups-1.5.0. No problem printing to a file, opening in a PDF editor (I used epdfview btw) and then printing to paper. I'm using Print Preview. There are reports that Firefox crash often using this feature, not just in OpenBSD, so can probably be an upstream problem. Thank you. My dmesg (yes, I compiled GENERIC myself, to test the changes that are not in snapshots yet): OpenBSD 5.1-current (GENERIC) #1: Wed Feb 15 14:45:06 BRST 2012 r...@daniel.cria.org.br:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz (GenuineIntel 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR real mem = 2145476608 (2046MB) avail mem = 2100281344 (2002MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 02/09/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (74 entries) bios0: vendor Dell Inc. version A04 date 02/09/2005 bios0: Dell Inc. OptiPlex GX280 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) PCI4(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 4 (PCI1) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus 3 (PCI3) acpiprt3 at acpi0: bus 1 (PCI4) acpiprt4 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3 acpibtn0 at acpi0: VBTN bios0: ROM list: 0xc/0xb000 0xcb000/0x1800! 0xcc800/0x3800 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 82915G Host rev 0x04 ppb0 at pci0 dev 1 function 0 Intel 82915G PCIE rev 0x04: apic 8 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 ATI Radeon X300 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 8 int 16 drm0 at radeondrm0 ATI Radeon X300 Sec rev 0x00 at pci1 dev 0 function 1 not configured ppb1 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x03: apic 8 int 16 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 Broadcom BCM5751 rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:12:3f:fe:f4:7b brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x03 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x03: apic 8 int 21 uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x03: apic 8 int 22 uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x03: apic 8 int 18 uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x03: apic 8 int 23 ehci0 at pci0 dev 29 function 7 Intel 82801FB USB rev 0x03: apic 8 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xd3 pci4 at ppb3 bus 4 auich0 at pci0 dev 30 function 2 Intel 82801FB AC97 rev 0x03: apic 8 int 23, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 Intel 82801FB LPC rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801FB IDE rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: _NEC, DVD+-RW ND-3530A, 102B ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 Intel 82801FB SATA rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 8 int 20 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: WDC WD2500JS-75MHB0 wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 Intel 82801FB SMBus rev 0x03: SMI iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 spdmem1 at iic0 addr 0x51: 512MB DDR2 SDRAM non-parity PC2-4200CL5 spdmem2 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity
Re: Firefox 9.0.1 crashing when printing
On Thu, Feb 16, 2012 at 11:31:04AM -0200, Daniel Bolgheroni wrote: Hi ports@, as part of the test process that takes place before each release, Firefox 9.0.1 closes with no messages when trying to print to a printer connected remotely. $ firefox $ echo $? 11 $ Firefox crashing when printing is not a new problem, but didn't find anything related to 9.0.1 in archives. Some details: The printer is a HP Color Laserjet 2605, connected via lpd, using print/cups-1.5.0. No problem printing to a file, opening in a PDF editor (I used epdfview btw) and then printing to paper. I'm using Print Preview. There are reports that Firefox crash often using this feature, not just in OpenBSD, so can probably be an upstream problem. Can you post versions of the gtk+2 and gtk+2-cups packages your are using please. Thank you. My dmesg (yes, I compiled GENERIC myself, to test the changes that are not in snapshots yet): OpenBSD 5.1-current (GENERIC) #1: Wed Feb 15 14:45:06 BRST 2012 r...@daniel.cria.org.br:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz (GenuineIntel 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR real mem = 2145476608 (2046MB) avail mem = 2100281344 (2002MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 02/09/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (74 entries) bios0: vendor Dell Inc. version A04 date 02/09/2005 bios0: Dell Inc. OptiPlex GX280 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) PCI4(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 4 (PCI1) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus 3 (PCI3) acpiprt3 at acpi0: bus 1 (PCI4) acpiprt4 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3 acpibtn0 at acpi0: VBTN bios0: ROM list: 0xc/0xb000 0xcb000/0x1800! 0xcc800/0x3800 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 82915G Host rev 0x04 ppb0 at pci0 dev 1 function 0 Intel 82915G PCIE rev 0x04: apic 8 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 ATI Radeon X300 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 8 int 16 drm0 at radeondrm0 ATI Radeon X300 Sec rev 0x00 at pci1 dev 0 function 1 not configured ppb1 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x03: apic 8 int 16 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 Broadcom BCM5751 rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:12:3f:fe:f4:7b brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x03 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x03: apic 8 int 21 uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x03: apic 8 int 22 uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x03: apic 8 int 18 uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x03: apic 8 int 23 ehci0 at pci0 dev 29 function 7 Intel 82801FB USB rev 0x03: apic 8 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xd3 pci4 at ppb3 bus 4 auich0 at pci0 dev 30 function 2 Intel 82801FB AC97 rev 0x03: apic 8 int 23, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 Intel 82801FB LPC rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801FB IDE rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: _NEC, DVD+-RW ND-3530A, 102B ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 Intel 82801FB SATA rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 8 int 20 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: WDC WD2500JS-75MHB0 wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at
Re: Firefox 9.0.1 crashing when printing
On Thu, Feb 16, 2012 at 02:41:23PM +0100, Antoine Jacoutot wrote: Can you post versions of the gtk+2 and gtk+2-cups packages your are using please. Sorry for the noise. gtk+2-2.24.9 gtk+2-cups-2.24.9p0 --- p0!!! Was running gtk+2-cups-2.24.9. Just upgraded and it's working fine. Thank you.
Re: Firefox 9.0.1 crashing when printing
On 14:41 Thu 16 Feb , Antoine Jacoutot wrote: On Thu, Feb 16, 2012 at 11:31:04AM -0200, Daniel Bolgheroni wrote: Hi ports@, as part of the test process that takes place before each release, Firefox 9.0.1 closes with no messages when trying to print to a printer connected remotely. $ firefox $ echo $? 11 $ Firefox crashing when printing is not a new problem, but didn't find anything related to 9.0.1 in archives. Some details: The printer is a HP Color Laserjet 2605, connected via lpd, using print/cups-1.5.0. No problem printing to a file, opening in a PDF editor (I used epdfview btw) and then printing to paper. I'm using Print Preview. There are reports that Firefox crash often using this feature, not just in OpenBSD, so can probably be an upstream problem. Can you post versions of the gtk+2 and gtk+2-cups packages your are using please. I have had same problem earlier and it was solved by upgrade to snapshot. ~$ pkg_info -Q firefox | grep installed firefox-9.0.1 (installed) firefox-i18n-ru-9.0.1p0 (installed) ~$ pkg_info -Q gtk+ | grep installed gtk+-1.2.10p10 (installed) gtk+2-2.24.9 (installed) gtk+2-cups-2.24.9p0 (installed) gtk+3-3.2.3p0 (installed) Thank you. My dmesg (yes, I compiled GENERIC myself, to test the changes that are not in snapshots yet): OpenBSD 5.1-current (GENERIC) #1: Wed Feb 15 14:45:06 BRST 2012 r...@daniel.cria.org.br:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz (GenuineIntel 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR real mem = 2145476608 (2046MB) avail mem = 2100281344 (2002MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 02/09/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (74 entries) bios0: vendor Dell Inc. version A04 date 02/09/2005 bios0: Dell Inc. OptiPlex GX280 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI1(S5) PCI2(S5) PCI3(S5) PCI4(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz cpu at mainbus0: not configured ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xe000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 4 (PCI1) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus 3 (PCI3) acpiprt3 at acpi0: bus 1 (PCI4) acpiprt4 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3 acpibtn0 at acpi0: VBTN bios0: ROM list: 0xc/0xb000 0xcb000/0x1800! 0xcc800/0x3800 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 82915G Host rev 0x04 ppb0 at pci0 dev 1 function 0 Intel 82915G PCIE rev 0x04: apic 8 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 ATI Radeon X300 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 8 int 16 drm0 at radeondrm0 ATI Radeon X300 Sec rev 0x00 at pci1 dev 0 function 1 not configured ppb1 at pci0 dev 28 function 0 Intel 82801FB PCIE rev 0x03: apic 8 int 16 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 Broadcom BCM5751 rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:12:3f:fe:f4:7b brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 1 Intel 82801FB PCIE rev 0x03 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 Intel 82801FB USB rev 0x03: apic 8 int 21 uhci1 at pci0 dev 29 function 1 Intel 82801FB USB rev 0x03: apic 8 int 22 uhci2 at pci0 dev 29 function 2 Intel 82801FB USB rev 0x03: apic 8 int 18 uhci3 at pci0 dev 29 function 3 Intel 82801FB USB rev 0x03: apic 8 int 23 ehci0 at pci0 dev 29 function 7 Intel 82801FB USB rev 0x03: apic 8 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xd3 pci4 at ppb3 bus 4 auich0 at pci0 dev 30 function 2 Intel 82801FB AC97 rev 0x03: apic 8 int 23, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 ichpcib0 at pci0 dev 31 function 0 Intel 82801FB LPC rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801FB IDE rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: _NEC, DVD+-RW ND-3530A, 102B ATAPI 5/cdrom
Re: Firefox 9.0.1 crashing when printing
On Thu, Feb 16, 2012 at 12:32:44PM -0200, Daniel Bolgheroni wrote: On Thu, Feb 16, 2012 at 02:41:23PM +0100, Antoine Jacoutot wrote: Can you post versions of the gtk+2 and gtk+2-cups packages your are using please. Sorry for the noise. gtk+2-2.24.9 gtk+2-cups-2.24.9p0 --- p0!!! Was running gtk+2-cups-2.24.9. Just upgraded and it's working fine. Yeah, that what I though ;) Thank you. np -- Antoine
Bâches imprimées, chevalets - moins chers, plus vite
Déjà disponible 2 jours après la commande Impression HD - encres résistantes aux UV 4 supports d'impression au choix 8 finitions (oeillets, renforts du bord, etc) Upload immédiat de vos fichiers ou transfert différé Commandez online en 5 minutes BILITE INDOOR/ BILITE OUTDOOR Structures auto-portantes de tension de toile destinées à l'usage intérieur ou extérieur. Construction en aluminium. 14 modèles disponibles. Utilisation en recto ou en recto verso. Installation en 1 heure à 1 personne en intérieur et à 2 personnes en extérieur. STOP-TROTTOIRS Plusieurs modèles disponibles. Lestage du pied pour une grande résistance au vent. 2 roulettes sous le pied facilite le déplacement du dispositif. CHEVALETS Disponible en formats A2 et A1. Assure une communication recto verso. S'installe aisément. Stabilisé par deux charnières. VEDI express © 2002-2012 Rollup, Pop Up, bâches, stands parapluie aux meilleurs prix et dans les meilleurs délais. Powered by VEDI ne plus recevoir nos newsletters Fichiers acceptés Taille des images : Pour Pop Up 3x3m : - Image 337,5x222cm : fichier 337,5x222cm Pour Pop Up 4x3m : - Image 405x222cm : fichier 405x222cm Résolutions conseillées: PDF: 80 dpi avec typo vectorisée TIFF ou JPEG: 120 dpi Format des fichiers acceptés : PDF HD, EPS (avec polices et images incorporées et vectorisées), TIFF, JPEG Respect des couleurs : De préférence, fournir les fichiers en CMYK (noir quadri: C70 M70 Y70 K100). Les fichiers RGB seront convertis. Garanties de qualité Qualité d'impression : Impression HD : vos images sont toujours imprimées en haute définition. Couleurs vivantes et respectées : La gestion des couleurs et la garantie de rendu sont assuréespar notre équipe d'infographistes et d'imprimeurs professionnels expérimentés. Encres UV résistantes : Les encres utilisées pour l'impression de votre image sont toujours des encres résistantes aux rayons ultra violets. Ces encres de qualité garantissent une bonne longévité aux couleurs de votre visuel, pour une image toujours vive. Supports de qualité : Vos images sont imprimées sur support satiné, pour un meilleur rendu des couleurs et des contrastes. D'une épaisseur de 170 µm ou supérieure, nos supports d'impression vous garantissent une image qui ne gondole pas et offrent une protection contre les griffes et les poussières. Résistants aux déchirures et à l'eau, ils peuvent se nettoyer. Images anti-feu : Vos images peuvent être imprimées sur support ignifugé B2 / M1 (en option), idéal et même parfois obligatoire pour les foires et salons. Qualité : Structure solide : éléments construits en acier peint de section 20cm x 20 cm. Simple à monter : assemblage sans outil, montage en 30 minutes à deux personnes. Idéal pour la participation à vos salons grand public ou professionnels. La structure Wave permet de construire des stands d’une multitude de dimensions. Les images murales sont fournies roulées avec une barre de suspension intégré (Veclip). Elles se suspendent au montant horizontal supérieur du stand et se déroulent de haut en bas entre les piliers. Leur largeur est de maximum 2 mètres afin de faciliter le stockage et le transport. Il existe 4 largeurs (50, 100, 150 et 200 cm) et 2 hauteurs (220 cm pour les stands de 2m50 et 290cm pour les stand de 3m20). Mises dos à dos, elles permettent l’affichage recto-verso. Vous choisissez vous-même les différentes largeurs de sorte de combler complètement un côté du stand ou de laisser un passage. La largeur disponible pour l’image est égale à la largeur du stand moins 50 cm. Par exemple: si la largeur du côté du stand à fermer est de 5 mètres, la largeur disponible pour l’image est de 450cm. Pour combler cette largeur, vous pouvez commander 2 images de 200cm et 1 image de 50cm. Si la hauteur de votre stand est de 320 cm, vous choisirez une hauteur d’image de 290 cm. Production et livraison : Livraison express : votre stand livré, prêt à monter en 5 jours ouvrables. Conditions générales de ventes Généralités Seules les présentes conditions de vente sont d’application pour la vente. Ces conditions générales s'appliquent à l’exclusion de toutes autres conditions, même celles reprises sur des bons de commande émanant de l’acheteur. Le vendeur se réserve le droit de modifier à tout moment ces conditions générales. Néanmoins, les commandes en cours restent soumises aux conditions applicables au moment où la vente a été conclue. Les photos, illustrations, couleurs et textes associés aux produits repris sur ce site n’ont pas de caractère contractuel et de ce fait ne sauraient engager la responsabilité du vendeur. Toute commande donnera lieu à une facturation 30 jours après son acceptation dans le cas où la commande ne peut être exécutée en raison d'un retard imputable au client. En cas d'annulation de sa commande, le client sera redevable d'un montant correspondant aux frais déjà
Ports unlocked
The ports tree is unlocked now. -- Christian naddy Weisgerber na...@mips.inka.de
Update: lang/ruby 1.8.7p358 and 1.9.3p125
These are both fairly simple updates. 1.8.7p358 has only a single
security patch over p357 related to preventing the SSL BEAST attack:
https://github.com/ruby/ruby/commit/2cb7a6c0569cf2f1da791f21f6af4ff9bfcb97ac
1.9.3p125 also has a patch to prevent the SSL BEAST attack, along
with some of our local patches being accepted upstream, and numerous
other bug fixes.
Tested on amd64 and i386. I plan to commit next week unless I hear
negative reports.
Thanks,
Jeremy
Index: 1.8/Makefile
===
RCS file: /cvs/ports/lang/ruby/1.8/Makefile,v
retrieving revision 1.20
diff -u -p -r1.20 Makefile
--- 1.8/Makefile5 Jan 2012 02:09:02 - 1.20
+++ 1.8/Makefile16 Feb 2012 16:30:03 -
@@ -7,7 +7,7 @@ COMMENT-tk= tk interface for ruby
COMMENT-ri_docs= ri documentation files ruby
VERSION= 1.8.7
-PATCHLEVEL=357
+PATCHLEVEL=358
SHARED_LIBS= ruby18 0.0
PKGNAME-main= ruby-${VERSION}.${PATCHLEVEL}
Index: 1.8/distinfo
===
RCS file: /cvs/ports/lang/ruby/1.8/distinfo,v
retrieving revision 1.5
diff -u -p -r1.5 distinfo
--- 1.8/distinfo5 Jan 2012 02:09:02 - 1.5
+++ 1.8/distinfo16 Feb 2012 16:58:48 -
@@ -1,5 +1,5 @@
-MD5 (ruby-1.8.7-p357.tar.gz) = srgkj/UJfP1in1uXaNHfgg==
-RMD160 (ruby-1.8.7-p357.tar.gz) = /6aNbOSTq5ZZLqvzXIdJg4CUHNQ=
-SHA1 (ruby-1.8.7-p357.tar.gz) = 4uKSXlVHqzbKTF5AJA9PejgPvtM=
-SHA256 (ruby-1.8.7-p357.tar.gz) = L9ysTrN7LroaTu85Kiki4HqSIvyG14HZIVTXFkNLliw=
-SIZE (ruby-1.8.7-p357.tar.gz) = 4895136
+MD5 (ruby-1.8.7-p358.tar.gz) = Jr1VNYhHRZp3Uqzb0zpTXw==
+RMD160 (ruby-1.8.7-p358.tar.gz) = T/G3td47cV0IGIo8dv1m0HQBsgQ=
+SHA1 (ruby-1.8.7-p358.tar.gz) = ogpm7G19fOE7YhlBoODIxSQLWEo=
+SHA256 (ruby-1.8.7-p358.tar.gz) = nghW1Ygw4I8eOCM5R9hZiYrgnUeAyxpQIQjkEwjeM8s=
+SIZE (ruby-1.8.7-p358.tar.gz) = 4895206
Index: 1.9/Makefile
===
RCS file: /cvs/ports/lang/ruby/1.9/Makefile,v
retrieving revision 1.22
diff -u -p -r1.22 Makefile
--- 1.9/Makefile2 Dec 2011 14:36:15 - 1.22
+++ 1.9/Makefile16 Feb 2012 16:17:39 -
@@ -7,7 +7,7 @@ COMMENT-tk =tk interface for ruby
COMMENT-ri_docs = ri documentation files for ruby
VERSION = 1.9.3
-PATCHLEVEL = 0
+PATCHLEVEL = 125
RUBYLIBREV = 1.9.1
SHARED_LIBS = ruby19 1.0
@@ -16,9 +16,6 @@ PKGNAME-gdbm =ruby-gdbm-${VERSION}.${P
PKGNAME-dbm = ruby-dbm-${VERSION}.${PATCHLEVEL}
PKGNAME-tk = ruby-tk-${VERSION}.${PATCHLEVEL}
PKGNAME-ri_docs = ruby-ri_docs-${VERSION}.${PATCHLEVEL}
-
-REVISION-main =0
-REVISION-ri_docs= 0
PKG_ARCH-ri_docs= *
Index: 1.9/distinfo
===
RCS file: /cvs/ports/lang/ruby/1.9/distinfo,v
retrieving revision 1.5
diff -u -p -r1.5 distinfo
--- 1.9/distinfo8 Nov 2011 23:38:57 - 1.5
+++ 1.9/distinfo16 Feb 2012 16:18:12 -
@@ -1,5 +1,5 @@
-MD5 (ruby-1.9.3-p0.tar.gz) = ji/vVhhc+68p0Mgyn8d8BQ==
-RMD160 (ruby-1.9.3-p0.tar.gz) = HSOFrKIMfLxONUNucVc01QK/gwg=
-SHA1 (ruby-1.9.3-p0.tar.gz) = 9875rSgIofUiQnyRFkFpc7n8rxo=
-SHA256 (ruby-1.9.3-p0.tar.gz) = O5EAQuNWH0KW/ZXZa/MDIuU+7PCDmS5QQqdoBpjPo04=
-SIZE (ruby-1.9.3-p0.tar.gz) = 12223217
+MD5 (ruby-1.9.3-p125.tar.gz) = dqrZAMGCOm+qUVG2mrJcCg==
+RMD160 (ruby-1.9.3-p125.tar.gz) = EQVonW0NYhlBmI0JxUCf7wyQjWc=
+SHA1 (ruby-1.9.3-p125.tar.gz) = gPvi1ISTzngWGYsRTuOfHH0v6RE=
+SHA256 (ruby-1.9.3-p125.tar.gz) = 73eZ7UntYSt0n48H9ZeInTxs9DLNbT+MDhp5bMQbKfQ=
+SIZE (ruby-1.9.3-p125.tar.gz) = 12128778
Index: 1.9/patches/patch-common_mk
===
RCS file: /cvs/ports/lang/ruby/1.9/patches/patch-common_mk,v
retrieving revision 1.3
diff -u -p -r1.3 patch-common_mk
--- 1.9/patches/patch-common_mk 15 Nov 2011 00:04:15 - 1.3
+++ 1.9/patches/patch-common_mk 16 Feb 2012 16:20:52 -
@@ -2,9 +2,9 @@ $OpenBSD: patch-common_mk,v 1.3 2011/11/
Don't regenerate rdoc documentation during install.
common.mk.orig Mon Nov 14 05:01:15 2011
-+++ common.mk Mon Nov 14 05:01:18 2011
-@@ -393,7 +393,7 @@ dont-install-man: $(PREP)
+--- common.mk.orig Mon Feb 6 04:53:11 2012
common.mk Thu Feb 16 08:18:24 2012
+@@ -394,7 +394,7 @@ dont-install-man: $(PREP)
post-no-install-man::
@$(NULLCMD)
Index: 1.9/patches/patch-configure
===
RCS file: /cvs/ports/lang/ruby/1.9/patches/patch-configure,v
retrieving revision 1.5
diff -u -p -r1.5 patch-configure
--- 1.9/patches/patch-configure 8 Nov 2011 23:38:57 - 1.5
+++ 1.9/patches/patch-configure 16 Feb 2012 16:21:16 -
@@ -1,13 +1,13 @@
$OpenBSD: patch-configure,v 1.5 2011/11/08
[Update] www/node 0.6.8 - 0.6.10
Hi, this patch updates node.js to 0.6.10
Tested on amd64 and i386.
Index: Makefile
===
RCS file: /cvs/ports/www/node/Makefile,v
retrieving revision 1.25
diff -N -u -p Makefile
--- Makefile24 Jan 2012 10:03:55 - 1.25
+++ Makefile16 Feb 2012 21:25:10 -
@@ -8,7 +8,7 @@ ONLY_FOR_ARCHS= amd64 i386
COMMENT= V8 JavaScript for clients and servers
-NODE_VERSION= v0.6.8
+NODE_VERSION= v0.6.10
DISTNAME= node-${NODE_VERSION}
PKGNAME= ${DISTNAME:S/v//g}
Index: distinfo
===
RCS file: /cvs/ports/www/node/distinfo,v
retrieving revision 1.12
diff -N -u -p distinfo
--- distinfo24 Jan 2012 10:03:55 - 1.12
+++ distinfo16 Feb 2012 21:25:10 -
@@ -1,5 +1,5 @@
-MD5 (node-v0.6.8.tar.gz) = n9e6otJ7hIwxNOauNbuHsg==
-RMD160 (node-v0.6.8.tar.gz) = tgXfOLuQb3qfjCLs/XYO+DLSqoA=
-SHA1 (node-v0.6.8.tar.gz) = w/dVtd/Q3j8wbQZXP6lDPYRWI90=
-SHA256 (node-v0.6.8.tar.gz) = 5sv8XM2+EBKNu9TceojBVNgPijnDqEdwks99Je73jJw=
-SIZE (node-v0.6.8.tar.gz) = 10488841
+MD5 (node-v0.6.10.tar.gz) = inT9XUjCx8ZKvGCyuPP7xw==
+RMD160 (node-v0.6.10.tar.gz) = 9iXi3fO54QTLO5z2Ociut5IfpV0=
+SHA1 (node-v0.6.10.tar.gz) = /wmIUkNMWV2GaTHDSgvS+diI3Zs=
+SHA256 (node-v0.6.10.tar.gz) = 0dBgq1PGB5QJQDUwAJoglQNvGZIKq9OhwgVC4NtYa9U=
+SIZE (node-v0.6.10.tar.gz) = 10545272
www/node module and related ports
This is a module for nodejs ports that would otherwise use npm install
to install. In addition to the module file itself, this also includes:
* patch to network.conf.template to add master site for npm registry
* switch lang/coffeescript over to use node module
* patch to port-modules.5
Attached are also 4 new node ports:
* bcrypt: bcrypt hashing
* fibers: coroutine support to avoid nested callback hell
* pg: postgresql database driver
* generic-pool: required by pg
Tested on amd64 and i386. OKs?
Jeremy
This patch applies in ports:
Index: www/node/node.port.mk
===
RCS file: www/node/node.port.mk
diff -N www/node/node.port.mk
--- /dev/null 1 Jan 1970 00:00:00 -
+++ www/node/node.port.mk 10 Feb 2012 17:29:06 -
@@ -0,0 +1,82 @@
+# $OpenBSD: ruby.port.mk,v 1.50 2011/12/09 21:41:43 jeremy Exp $
+
+# node module
+
+CATEGORIES += www/node
+
+BUILD_DEPENDS += www/node
+RUN_DEPENDS += www/node
+
+.if ${CONFIGURE_STYLE:L:Mnpm}
+. if ${CONFIGURE_STYLE:L:Mext}
+# Node C++ extensions are specific to an arch and are loaded as
+# shared libraries, so set SHARED_ONLY and make sure PKG_ARCH=* is
+# not set.
+.if defined(PKG_ARCH) ${PKG_ARCH} == *
+ERRORS += Fatal: Should not have PKG_ARCH=* when compiling extensions
+.endif
+SHARED_ONLY = Yes
+# All node extensions appear to link against these two libraries
+WANTLIB += m stdc++
+. else
+# Node libraries that don't contain C++ extensions should run on
+# any arch.
+PKG_ARCH ?=*
+. endif
+
+# The npm package repository separates packages in different directories,
+# so to eliminate duplication, you need to set the NPM_NAME and VERSION
+# variables so it can use the correct DISTNAME and MASTER_SITES. The
+# NPM_NAME is required anyway during the install tasks, so it may as
+# well be used here.
+DISTNAME ?=${NPM_NAME}-${VERSION}
+MASTER_SITES ?=${MASTER_SITE_NPM}${NPM_NAME}/-/
+EXTRACT_SUFX ?=.tgz
+PKGNAME ?= node-${DISTNAME}
+
+MODNODE_BIN_NPM = ${LOCALBASE}/bin/npm
+NPM_INSTALL_FILE = ${WRKDIR}/${DISTNAME}.tgz
+NPM_TAR_DIR = package
+WRKDIST = ${WRKDIR}/${NPM_TAR_DIR}
+
+# List of npm package names to depend on. Only necessary
+# if the current port depends on other node ports.
+MODNODE_DEPENDS ?=
+
+# Link all dependencies first so that npm will install without complaining.
+# Then rebuild the distfile, since it make contain local patches.
+# Then use npm install to install the package to a local node_modules dir.
+MODNODE_BUILD_TARGET = \
+ cd ${WRKDIST} find . -type f -name '*.orig' -print0 | \
+ xargs -r0 rm; \
+ for dep in ${MODNODE_DEPENDS}; do \
+ cd ${WRKDIR} ${MODNODE_BIN_NPM} link $$dep; \
+ done; \
+ cd ${WRKDIR} tar -zcf ${NPM_INSTALL_FILE} ${NPM_TAR_DIR}; \
+ cd ${WRKDIR} HOME=${WRKDIR} ${MODNODE_BIN_NPM} install \
+ ${NPM_INSTALL_FILE}
+
+# Move just this package from the local node_modules dir to the global
+# node_modules dir. If there are any binaries in the package, create
+# symlinks in the default PATH that point to them.
+MODNODE_INSTALL_TARGET = \
+ mkdir ${PREFIX}/lib/node_modules; \
+ mv ${WRKDIR}/node_modules/${NPM_NAME} ${PREFIX}/lib/node_modules; \
+ chown -R ${SHAREOWN}:${SHAREGRP} ${PREFIX}/lib/node_modules; \
+ if [ -d ${PREFIX}/lib/node_modules/${NPM_NAME}/bin ]; then \
+ cd ${PREFIX}/lib/node_modules/${NPM_NAME}/bin \
+ for bin in *; do \
+ ln -s
${TRUEPREFIX}/lib/node_modules/${NPM_NAME}/bin/$$bin \
+ ${PREFIX}/bin/$$bin; \
+ done; \
+ fi;
+
+. if !target(do-build)
+do-build:
+ ${MODNODE_BUILD_TARGET}
+. endif
+. if !target(do-install)
+do-install:
+ ${MODNODE_INSTALL_TARGET}
+. endif
+.endif
Index: infrastructure/templates/network.conf.template
===
RCS file: /cvs/ports/infrastructure/templates/network.conf.template,v
retrieving revision 1.170
diff -u -p -r1.170 network.conf.template
--- infrastructure/templates/network.conf.template 11 Nov 2011 16:58:09
- 1.170
+++ infrastructure/templates/network.conf.template 1 Feb 2012 18:58:24
-
@@ -272,8 +272,11 @@ MASTER_SITE_MYSQL+= \
MASTER_SITE_PYPI +=\
http://pypi.python.org/packages/source/
-MASTER_SITE_RUBYGEMS+= \
+MASTER_SITE_RUBYGEMS += \
http://rubygems.org/downloads/
+
+MASTER_SITE_NPM += \
+ https://registry.npmjs.org/
MASTER_SITE_ISC += \
http://ftp.isc.org/isc/ \
Index: lang/coffeescript/Makefile
===
RCS file: /cvs/ports/lang/coffeescript/Makefile,v
retrieving revision 1.1.1.1
diff -u -p -r1.1.1.1 Makefile
--- lang/coffeescript/Makefile 19 Dec 2011 22:21:47 -
update sysutils/pv
Straightforward update to 1.2.0, doesn't need groff. ok? Index: Makefile === RCS file: /cvs/ports/sysutils/pv/Makefile,v retrieving revision 1.3 diff -u -p -r1.3 Makefile --- Makefile20 Nov 2010 17:22:42 - 1.3 +++ Makefile16 Feb 2012 21:38:32 - @@ -2,7 +2,7 @@ COMMENT = monitor the progress of data through a pipeline -DISTNAME = pv-1.1.4 +DISTNAME = pv-1.2.0 CATEGORIES = sysutils HOMEPAGE = http://www.ivarch.com/programs/pv.shtml @@ -18,6 +18,5 @@ MASTER_SITES =http://pipeviewer.google WANTLIB = c CONFIGURE_STYLE = gnu -USE_GROFF =Yes .include bsd.port.mk Index: distinfo === RCS file: /cvs/ports/sysutils/pv/distinfo,v retrieving revision 1.1.1.1 diff -u -p -r1.1.1.1 distinfo --- distinfo3 Apr 2009 18:03:04 - 1.1.1.1 +++ distinfo16 Feb 2012 21:38:32 - @@ -1,5 +1,5 @@ -MD5 (pv-1.1.4.tar.gz) = jQ7aIYJkCRnar2GGzYFqEw== -RMD160 (pv-1.1.4.tar.gz) = rART5Z+fHYHMQLVbiHCHGqIvnxA= -SHA1 (pv-1.1.4.tar.gz) = LYTiErVDUJtnU1GAnR4CV+Z5xfo= -SHA256 (pv-1.1.4.tar.gz) = /UOuo86QF0mcwCxbMjfgIHFAsX1u+t3AX6jMOTxkqQQ= -SIZE (pv-1.1.4.tar.gz) = 92146 +MD5 (pv-1.2.0.tar.gz) = 98xlyFCsmMYBPMRIBQ7uSw== +RMD160 (pv-1.2.0.tar.gz) = 1X6NHp4fJc64rcjnCbneT6uqAx0= +SHA1 (pv-1.2.0.tar.gz) = mIjwcFn3apIyfGvt+8bKitTU5Bs= +SHA256 (pv-1.2.0.tar.gz) = +Tpe2kfUYH41AgYicXreW8Dl7oISOpczEJDxnguQfF8= +SIZE (pv-1.2.0.tar.gz) = 93686 Index: patches/patch-autoconf_make_unreal_mk === RCS file: /cvs/ports/sysutils/pv/patches/patch-autoconf_make_unreal_mk,v retrieving revision 1.1.1.1 diff -u -p -r1.1.1.1 patch-autoconf_make_unreal_mk --- patches/patch-autoconf_make_unreal_mk 3 Apr 2009 18:03:04 - 1.1.1.1 +++ patches/patch-autoconf_make_unreal_mk 16 Feb 2012 21:38:32 - @@ -1,11 +1,11 @@ $OpenBSD: patch-autoconf_make_unreal_mk,v 1.1.1.1 2009/04/03 18:03:04 giovanni Exp $ autoconf/make/unreal.mk.orig Fri Apr 3 19:14:16 2009 -+++ autoconf/make/unreal.mkFri Apr 3 19:14:27 2009 +--- autoconf/make/unreal.mk.orig Mon Jan 18 22:56:49 2010 autoconf/make/unreal.mkMon Feb 6 20:29:24 2012 @@ -155,7 +155,6 @@ install: all doc - $(DESTDIR)/$(bindir)/$(package) + $(DESTDIR)$(bindir)/$(package) $(INSTALL) -m 644 doc/quickref.1 \ - $(DESTDIR)/$(mandir)/man1/$(package).1 -- -$(DO_GZIP) $(DESTDIR)/$(mandir)/man1/$(package).1 + $(DESTDIR)$(mandir)/man1/$(package).1 +- -$(DO_GZIP) $(DESTDIR)$(mandir)/man1/$(package).1 if test -n $(CATALOGS); then \ catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \
new: devel/p5-IO-CaptureOutput, p5-TAP-Harness-Archive and p5-TAP-Harness-Multiple
These Perl modules are REGRESS_DEPENDS for the upcoming parrot update. IO::CaptureOutput: This module provides routines for capturing STDOUT and STDERR from perl subroutines, forked system calls (e.g. system(), fork()) and from XS or C modules. TAP::Harness::Archive: This module is a direct subclass of TAP::Harness and behaves in exactly the same way except for one detail. In addition to outputting a running progress of the tests and an ending summary it can also capture all of the raw TAP from the individual test files or streams into an archive file (.tar or .tar.gz). TAP::Harness::Multiple: This package subclasses Michael Peters' TAP::Harness::Archive package from CPAN. It provides its own runtests() method for the case where you need to create an archive of test results generated by running multiple harnesses sequentially. p5-IO-CaptureOutput.tar.gz Description: gzip compressed data, from Unix p5-TAP-Harness-Archive.tar.gz Description: gzip compressed data, from Unix p5-TAP-Harness-Multiple.tar.gz Description: gzip compressed data, from Unix
update lang/parrot
Update lang/parrot to 4.0.0, take maintainer.
- set SHARED_ONLY, merge PFRAG.shared into PLIST. It doesn't really
work without shared modules ...
- fix detection of gmp, IPv6, OpenGL and readline
- respect CC, CFLAGS and CXX
- the old and broken threading implementation got removed upstream, so
no need for --without-threads
Index: Makefile
===
RCS file: /cvs/ports/lang/parrot/Makefile,v
retrieving revision 1.17
diff -u -p -r1.17 Makefile
--- Makefile19 Oct 2011 13:30:59 - 1.17
+++ Makefile16 Feb 2012 22:05:19 -
@@ -1,15 +1,18 @@
# $OpenBSD: Makefile,v 1.17 2011/10/19 13:30:59 ajacoutot Exp $
+SHARED_ONLY = Yes
+
COMMENT= virtual machine designed for interpreted languages
-V= 3.6.0
+V= 4.0.0
DISTNAME= parrot-$V
-REVISION= 0
CATEGORIES=lang perl6
-SHARED_LIBS= parrot 3.0
+SHARED_LIBS= parrot 4.0
HOMEPAGE= http://www.parrot.org/
+MAINTAINER = Pascal Stumpf pascal.stu...@cubes.de
+
MASTER_SITES= ftp://ftp.parrot.org/pub/parrot/releases/stable/$V/
# Artistic2
@@ -18,25 +21,32 @@ PERMIT_PACKAGE_FTP= Yes
PERMIT_DISTFILES_CDROM=Yes
PERMIT_DISTFILES_FTP= Yes
-WANTLIB += c m ncurses pthread readline stdc++ util z
-WANTLIB += icudata icuuc icui18n
+WANTLIB += GL GLU c glut gmp icudata icui18n icuuc m ncurses pthread
+WANTLIB += readline stdc++ util z
-LIB_DEPENDS= textproc/icu4c
-REGRESS_DEPENDS= devel/p5-Test-Pod
+BUILD_DEPENDS= graphics/glew
+LIB_DEPENDS= textproc/icu4c \
+ devel/gmp \
+ graphics/freeglut
+REGRESS_DEPENDS= devel/p5-TAP-Harness-Multiple \
+ devel/p5-Test-Perl-Critic
CONFIGURE_SCRIPT= /usr/bin/perl Configure.pl
CONFIGURE_STYLE= simple
-CONFIGURE_ARGS+= --prefix=${PREFIX}
-CONFIGURE_ARGS+= --parrot_is_shared
-CONFIGURE_ARGS+= --icuheaders=${LOCALBASE}/include
-CONFIGURE_ARGS+= --icushared=`${LOCALBASE}/bin/icu-config --ldflags`
-# There's a nasty bug in sleep() when compiled with threads, which uses
-# pthread_cond_timedwait(3). Without threads, it maps to an ordinary sleep(3)
-# call. Exposed by rakudo tests.
-CONFIGURE_ARGS += --without-threads
+CONFIGURE_ARGS+= \
+ --prefix=${PREFIX} \
+ --cc=${CC} \
+ --ccflags=-I${LOCALBASE}/include -I${X11BASE}/include \
+ --optimize=${CFLAGS} \
+ --link=${CXX} \
+ --linkflags=-L${LOCALBASE}/lib -L${X11BASE}/lib \
+ --ld=${CXX} \
+ --ldflags=-L${LOCALBASE}/lib -L${X11BASE}/lib \
+ --parrot_is_shared \
+ --icu-config=${LOCALBASE}/bin/icu-config
# XXX The default (gms) garbage collector has issues on powerpc. Until
-# it's fixed, use the old one (ms2).
+# XXX it's fixed, use the old one (ms2).
.if ${MACHINE_ARCH:Mpowerpc}
CONFIGURE_ARGS+= --gc=ms2
.endif
@@ -45,14 +55,14 @@ CONFIGURE_ENV = LIBparrot_VERSION=${LIB
MAKE_ENV= LIBparrot_VERSION=${LIBparrot_VERSION}
-ALL_TARGET=installable
INSTALL_TARGET = install install-doc
-REGRESS_TARGET=test
+REGRESS_TARGET=fulltest
SUBST_VARS += V
pre-configure:
${SUBST_CMD} ${WRKSRC}/config/init/hints/openbsd.pm
+
post-install:
${INSTALL_DATA} ${WRKSRC}/blib/lib/libparrot.so.${LIBparrot_VERSION} \
${PREFIX}/lib
Index: distinfo
===
RCS file: /cvs/ports/lang/parrot/distinfo,v
retrieving revision 1.11
diff -u -p -r1.11 distinfo
--- distinfo20 Aug 2011 16:47:05 - 1.11
+++ distinfo16 Feb 2012 22:05:19 -
@@ -1,5 +1,5 @@
-MD5 (parrot-3.6.0.tar.gz) = bnodhP8/siE6cGc2cazm3w==
-RMD160 (parrot-3.6.0.tar.gz) = 7TJYzzLz0okRsDK8TWlmoxCcm2g=
-SHA1 (parrot-3.6.0.tar.gz) = bl5ltkcCuto4UfMZuSJo5kLFww4=
-SHA256 (parrot-3.6.0.tar.gz) = goCTChKmbDhLOXsxSC3y78H8xl79cjsnnHGx4oPCY48=
-SIZE (parrot-3.6.0.tar.gz) = 4038957
+MD5 (parrot-4.0.0.tar.gz) = /GE8QXcbr3kwfFGQcjAimQ==
+RMD160 (parrot-4.0.0.tar.gz) = majIptrsaqSe5GDcmTZHzMVuhP8=
+SHA1 (parrot-4.0.0.tar.gz) = 8zwlOnX4MgfE8wPh35tlr/DTMdM=
+SHA256 (parrot-4.0.0.tar.gz) = pj1F9Q992Lp2OVzSrxQQhBI5isJLjYJ9s2kiHNs3+to=
+SIZE (parrot-4.0.0.tar.gz) = 4506816
Index: patches/patch-config_auto_ipv6_test_in
===
RCS file: patches/patch-config_auto_ipv6_test_in
diff -N patches/patch-config_auto_ipv6_test_in
--- /dev/null 1 Jan 1970 00:00:00 -
+++ patches/patch-config_auto_ipv6_test_in 16 Feb 2012 22:05:19 -
@@ -0,0 +1,11 @@
+$OpenBSD$
+--- config/auto/ipv6/test.in.orig Wed Feb 8 00:18:43 2012
config/auto/ipv6/test.in Wed Feb 8 00:18:56 2012
+@@ -9,6 +9,7 @@ Copyright (C) 2010-2011, Parrot Foundation.
+ #else
+ # include sys/types.h
+ # include sys/socket.h
++# include netinet/in.h
+ # include netdb.h
+
new: lang/nqp
This is Not Quite Perl -- a compiler for quickly generating PIR routines from Perl6-like code. The key feature of NQP is that it's designed to be a very small compiler (as compared with, say, perl6 or Rakudo) and is focused on being a high-level way to create compilers and libraries for virtual machines (such as the Parrot Virtual Machine). Unlike a full-fledged implementation of Perl 6, NQP strives to have as small a runtime footprint as it can, while still providing a Perl 6 object model and regular expression engine for the virtual machine. This is the new bootstrap compiler for rakudo and thus needed for the update. It also depends on the parrot update. nqp.tar.gz Description: gzip compressed data, from Unix
[UPDATE] math/ginac
Okay? Index: Makefile === RCS file: /cvs/ports/math/ginac/Makefile,v retrieving revision 1.16 diff -u -p -r1.16 Makefile --- Makefile18 Aug 2011 15:19:54 - 1.16 +++ Makefile16 Feb 2012 22:50:12 - @@ -2,7 +2,7 @@ COMMENT= GiNaC is Not a Computer Algebra System (CAS) -DISTNAME= ginac-1.6.1 +DISTNAME= ginac-1.6.2 SHARED_LIBS += ginac 3.0 # 0.3 CATEGORIES=math Index: distinfo === RCS file: /cvs/ports/math/ginac/distinfo,v retrieving revision 1.6 diff -u -p -r1.6 distinfo --- distinfo18 Aug 2011 15:19:54 - 1.6 +++ distinfo16 Feb 2012 22:50:12 - @@ -1,5 +1,5 @@ -MD5 (ginac-1.6.1.tar.bz2) = 04Pz7lD4j/obOWb9sR0PEg== -RMD160 (ginac-1.6.1.tar.bz2) = iBHvhsKCF+qTX2LmvDGVxflcq5c= -SHA1 (ginac-1.6.1.tar.bz2) = DGgF8y/+aiDgoq6tGHqXWx9QSA0= -SHA256 (ginac-1.6.1.tar.bz2) = BljEpSjzeHHF7CRJY3P+3k4+WdMiO+r4gMdfB6nC9oA= -SIZE (ginac-1.6.1.tar.bz2) = 1048724 +MD5 (ginac-1.6.2.tar.bz2) = TP3ShqsMMpgewcnHeeh+uQ== +RMD160 (ginac-1.6.2.tar.bz2) = RrWPV+aFg9ZdeUgTRJ0Vnw3cnYY= +SHA1 (ginac-1.6.2.tar.bz2) = yTkTxMVDh0sq3k8DkAMGQb5+DEE= +SHA256 (ginac-1.6.2.tar.bz2) = DzTSVQJLP7JY5E2oT56C37Pcm8FfCZm3oYIEpzBmO94= +SIZE (ginac-1.6.2.tar.bz2) = 1048764
[UPDATE] math/ccolamd
Okay?
Index: Makefile
===
RCS file: /cvs/ports/math/ccolamd/Makefile,v
retrieving revision 1.7
diff -u -p -r1.7 Makefile
--- Makefile18 Nov 2011 11:16:24 - 1.7
+++ Makefile16 Feb 2012 22:54:35 -
@@ -2,9 +2,8 @@
COMMENT = library for column approximate minimum degree ordering
-DISTNAME = CCOLAMD-2.7.2
+DISTNAME = CCOLAMD-2.7.4
PKGNAME = ${DISTNAME:L}
-REVISION = 2
SHARED_LIBS += ccolamd0.0
CATEGORIES = math
Index: distinfo
===
RCS file: /cvs/ports/math/ccolamd/distinfo,v
retrieving revision 1.2
diff -u -p -r1.2 distinfo
--- distinfo26 Oct 2010 18:06:10 - 1.2
+++ distinfo16 Feb 2012 22:54:35 -
@@ -1,5 +1,5 @@
-MD5 (CCOLAMD-2.7.2.tar.gz) = edgT1bVJUQYPwmQXK/tcpg==
-RMD160 (CCOLAMD-2.7.2.tar.gz) = dg0JyqrBgBP/TPDXTU43E0cdFw8=
-SHA1 (CCOLAMD-2.7.2.tar.gz) = 9YnHUpEtSO1i9ae/nXkZg2sygzo=
-SHA256 (CCOLAMD-2.7.2.tar.gz) = 3LVkWxhgAPa2M4YR1p19UTwF2tWCDQ7QlhnetPdMQW4=
-SIZE (CCOLAMD-2.7.2.tar.gz) = 62306
+MD5 (CCOLAMD-2.7.4.tar.gz) = u1X2tLk1gWDquhpX+GPGXg==
+RMD160 (CCOLAMD-2.7.4.tar.gz) = OpfDcH4msp31sAmGrfBPXImTYbY=
+SHA1 (CCOLAMD-2.7.4.tar.gz) = +Vq1SC+i4aLwexhYbTlNanSwwcI=
+SHA256 (CCOLAMD-2.7.4.tar.gz) = 7AxoE8BoMZDuDQ70NdoAizZoOJiKdV95KS+YeYG01Ro=
+SIZE (CCOLAMD-2.7.4.tar.gz) = 61709
update lang/rakudo
Finally, the update to rakudo 2012.01 itself.
Index: Makefile
===
RCS file: /cvs/ports/lang/rakudo/Makefile,v
retrieving revision 1.10
diff -u -p -r1.10 Makefile
--- Makefile13 Nov 2011 16:07:09 - 1.10
+++ Makefile16 Feb 2012 22:20:22 -
@@ -3,14 +3,16 @@
# Memory hog, stuck for days on the same file during build.
NOT_FOR_ARCHS =sh
+SHARED_ONLY = Yes
+
COMMENT = Rakudo Perl 6 compiler
PORTNAME = rakudo
-VERSION = 2011.07
+VERSION = 2012.01
DISTNAME = ${PORTNAME}-star-${VERSION}
PKGNAME = ${PORTNAME}-${VERSION}
-PARROT_VERSION = 3.6.0
+PARROT_VERSION = 4.0.0
SUBST_VARS += PARROT_VERSION
CATEGORIES = lang perl6
@@ -25,22 +27,25 @@ PERMIT_PACKAGE_FTP =Yes
PERMIT_DISTFILES_CDROM =Yes
PERMIT_DISTFILES_FTP = Yes
-WANTLIB = c icudata icui18n icuuc m ncurses parrot pthread
+WANTLIB = c gmp icudata icui18n icuuc m ncurses parrot pthread
WANTLIB += readline stdc++ util
VMEM_WARNING = Yes
MASTER_SITES = http://cloud.github.com/downloads/rakudo/star/
+BUILD_DEPENDS =lang/nqp
LIB_DEPENDS = lang/parrot=${PARROT_VERSION} \
textproc/icu4c
-FAKE_FLAGS =
PERL6LIB=${WRKINST}${PREFIX}/lib/parrot/${PARROT_VERSION}/languages/perl6/lib
+FAKE_FLAGS =
PERL6LIB=${WRKINST}${PREFIX}/lib/parrot/${PARROT_VERSION}/languages/nqp/lib:${WRKINST}${PREFIX}/lib/parrot/${PARROT_VERSION}/languages/perl6/lib
+FAKE_FLAGS +=
LD_LIBRARY_PATH=${WRKINST}${PREFIX}/lib/parrot/${PARROT_VERSION}/dynext
CONFIGURE_STYLE = simple
CONFIGURE_SCRIPT = /usr/bin/perl Configure.pl
-CONFIGURE_ARGS += --prefix=${PREFIX} \
- --parrot-config=${LOCALBASE}/bin/parrot_config
+CONFIGURE_ARGS += --prefix=${PREFIX} \
+ --with-parrot=${LOCALBASE}/bin/parrot \
+ --with-nqp=${LOCALBASE}/bin/nqp
REGRESS_TARGET = rakudo-test rakudo-spectest
@@ -53,6 +58,6 @@ post-install:
pre-regress:
#no need to check out git repository
perl -pi -e 's/spectest_checkout spectest_update// if /^testable/' \
- ${WRKSRC}/rakudo/Makefile
+ ${WRKSRC}/rakudo-${VERSION}/Makefile
.include bsd.port.mk
Index: distinfo
===
RCS file: /cvs/ports/lang/rakudo/distinfo,v
retrieving revision 1.3
diff -u -p -r1.3 distinfo
--- distinfo20 Aug 2011 16:47:54 - 1.3
+++ distinfo16 Feb 2012 22:20:22 -
@@ -1,5 +1,5 @@
-MD5 (rakudo-star-2011.07.tar.gz) = BQGOECC5p0bZlC/ZFB4YhQ==
-RMD160 (rakudo-star-2011.07.tar.gz) = Afu9pZAxiM4Fmo0ZcYl3+TUyZ7g=
-SHA1 (rakudo-star-2011.07.tar.gz) = YWeX7eeeizWfTmcG5eWVfRCUI2Q=
-SHA256 (rakudo-star-2011.07.tar.gz) =
9CvvC+gnYu7ohaPpZaFxDib+gktM/6xfO7CiobMt6SU=
-SIZE (rakudo-star-2011.07.tar.gz) = 5705151
+MD5 (rakudo-star-2012.01.tar.gz) = 0++JuptZAfSdMQtXf7sbIQ==
+RMD160 (rakudo-star-2012.01.tar.gz) = Z34KnIoiz/+JiDJqiGPqpoXPJ6Q=
+SHA1 (rakudo-star-2012.01.tar.gz) = Ol/4mUYIRIJPEtk3JvBHptwePMQ=
+SHA256 (rakudo-star-2012.01.tar.gz) =
K/oFXG07YGCRf7RVYdE0b+9RiRKq9przYfVN0/nskDw=
+SIZE (rakudo-star-2012.01.tar.gz) = 7549630
Index: patches/patch-tools_build_Makefile_in
===
RCS file: patches/patch-tools_build_Makefile_in
diff -N patches/patch-tools_build_Makefile_in
--- /dev/null 1 Jan 1970 00:00:00 -
+++ patches/patch-tools_build_Makefile_in 16 Feb 2012 22:20:22 -
@@ -0,0 +1,61 @@
+$OpenBSD$
+--- tools/build/Makefile.in.orig Sat Jan 28 00:40:15 2012
tools/build/Makefile.inFri Feb 3 20:18:16 2012
+@@ -49,27 +49,27 @@ PERL6_EXE = perl6$(EXE)
+ PERL6_LANG_DIR = $(PARROT_LIB_DIR)/languages/perl6
+
+ MODULES = \
+- modules/zavolaj \
+- modules/xml-writer \
+- modules/svg \
+- modules/svg-plot \
+- modules/Math-RungeKutta \
+- modules/Math-Model \
+- modules/perl6-Term-ANSIColor \
+- modules/test-mock \
+- modules/Grammar-Profiler-Simple \
+- modules/grammar-debugger \
+- modules/Perl6-MIME-Base64 \
+- modules/perl6-lwp-simple \
+- modules/json \
+- modules/perl6-digest-md5 \
+- modules/perl6-File-Tools \
+- modules/panda \
+- modules/perl6-Config-INI \
+- modules/perl6-http-status \
+- modules/perl6-http-easy \
+- modules/Bailador \
+- modules/MiniDBI
++ ../modules/zavolaj \
++ ../modules/xml-writer \
++ ../modules/svg \
++ ../modules/svg-plot \
++ ../modules/Math-RungeKutta \
++ ../modules/Math-Model \
++ ../modules/perl6-Term-ANSIColor \
++ ../modules/test-mock \
++ ../modules/Grammar-Profiler-Simple \
++ ../modules/grammar-debugger \
++ ../modules/Perl6-MIME-Base64 \
++ ../modules/perl6-lwp-simple \
++ ../modules/json \
++
[UPDATE] math/qrupdate
Okay? Index: Makefile === RCS file: /cvs/ports/math/qrupdate/Makefile,v retrieving revision 1.6 diff -u -p -r1.6 Makefile --- Makefile23 Oct 2010 15:09:57 - 1.6 +++ Makefile16 Feb 2012 23:28:32 - @@ -2,8 +2,7 @@ COMMENT = library for fast updates of QR and Cholesky decompositions -DISTNAME = qrupdate-1.1.1 -REVISION = 2 +DISTNAME = qrupdate-1.1.2 SHARED_LIBS += qrupdate 0.0 # .1.1 CATEGORIES = math Index: distinfo === RCS file: /cvs/ports/math/qrupdate/distinfo,v retrieving revision 1.1.1.1 diff -u -p -r1.1.1.1 distinfo --- distinfo11 May 2010 17:07:33 - 1.1.1.1 +++ distinfo16 Feb 2012 23:28:32 - @@ -1,5 +1,5 @@ -MD5 (qrupdate-1.1.1.tar.gz) = d4LH7mwjTlanLWuGwYVvoA== -RMD160 (qrupdate-1.1.1.tar.gz) = /WMwar6Rrc1dR+QI2c1K8+GzKww= -SHA1 (qrupdate-1.1.1.tar.gz) = j7q6ICsNS/gIUrLcbI0dS5C4FtQ= -SHA256 (qrupdate-1.1.1.tar.gz) = nwEA01j5bK6TlMKMl9vx/TWWdWcdKiyayIz9EhpGZio= -SIZE (qrupdate-1.1.1.tar.gz) = 50063 +MD5 (qrupdate-1.1.2.tar.gz) = bQc4h8boWMJK7aW1TFeoxA== +RMD160 (qrupdate-1.1.2.tar.gz) = nSOy0TJ4wzX2II67Z3XfS0BJeFw= +SHA1 (qrupdate-1.1.2.tar.gz) = 90A7ZGrOIPSisIC0kzoekVL6xSY= +SHA256 (qrupdate-1.1.2.tar.gz) = 4qHHEdyOvEGOIRlYM4FMsvhLh4uQondDZfAWZAIwjgg= +SIZE (qrupdate-1.1.2.tar.gz) = 49734
update: devel/subversion-1.7.3
Version 1.7.3
(14 Feb 2012, from /branches/1.7.x)
http://svn.apache.org/repos/asf/subversion/tags/1.7.3
General:
* ship mod_dontdothat with the standard release
User-visible changes:
* fix segfault on 'svn rm $ROOT_URL' (issue #4074)
* replace a couple of assertions in favor of errors (r1207858, -949)
* fix a server assert after being upgraded (r1210195)
* fix segfault on 'svn mkdir svn://localhost' (r1211483)
* make 'svnadmin recover' prune the rep cache (r1213331, et al)
* make svnmucc use values from --config-dir option
* update and clarify the merge help text (r1154121, et al)
* replace wc assertion with informative error (r1222521, -693)
* copy permissions correctly for FSFS dirs (r1229252)
* improve 'svn log --with-all-revprops' over ra-dav (issue #4082)
* fix segfault when remapping a file external (issue #4093)
* fix segfault caused by obstructing unversioned dir (r1229677)
* fix regression on first update of external dir with '-r' (issue #4053)
* fix various EOL-handling problems in 'svn patch' (issues #3814, #3991)
* fix segfault in 'svn revert' (r1229303)
* improve correctness of 'svn patch --dry-run' (r1231944, -5)
* enforce revisions given in 'svn:externals' (issue #4053)
* fix potential corruption on 32-bit FSFS with large files (r1230212)
* make 'svn status --xml' show new files (issue #4097)
* fix 'svn mergeinfo' correctness (issue #4050)
* return the correct status for non-present nodes (r1232202, -07, -21, -22)
* improve SASL error messages (r1236343, et al)
* improve server cert error code for ra_serf (r1232413)
* fix SVNParentPath listings for parent path symlinks (r1221767, -80)
* fix mod_dav_svn's handling of POST errors (issue #4086)
* log some mod_dav_svn errors, rather than ignoring them (r1237720, -9596)
* relax requirements for canonicalization in mod_dav_svn (r1236173)
* fix a rare source of FSFS corruption (r1240752)
* allow committing the result of some copy operations (issue #4059)
* prevent one-byte buffer overflow in base64 decoding (r1242337)
Developer-visible changes:
* JavaHL: Add missing notify action, fixing an exception (r1221793)
* fix swig-py memory leak (r1235264, -296, -302, -736)
* fix spurious test suite failure (r1220742, -50)
* allow running tests on UNC shares (r1225491)
* bindings: see platform-specific password providers (r1242660, -1)
* skip 'svnrdump dump' tests over ra_serf (r1242537)
* convert a few ra_serf assertions to errors (r1242607)
Index: Makefile
===
RCS file: /cvs/ports/devel/subversion/Makefile,v
retrieving revision 1.103
diff -u -p -r1.103 Makefile
--- Makefile23 Dec 2011 10:34:36 - 1.103
+++ Makefile13 Feb 2012 15:41:27 -
@@ -6,7 +6,7 @@ COMMENT-python= python interface to sub
COMMENT-ruby= ruby interface to subversion
COMMENT-ap2= apache2 subversion modules
-VERSION= 1.7.2
+VERSION= 1.7.3
DISTNAME= subversion-${VERSION}
PKGNAME-main= ${DISTNAME}
FULLPKGNAME-perl= p5-SVN-${VERSION}
Index: distinfo
===
RCS file: /cvs/ports/devel/subversion/distinfo,v
retrieving revision 1.31
diff -u -p -r1.31 distinfo
--- distinfo7 Dec 2011 16:47:37 - 1.31
+++ distinfo13 Feb 2012 15:41:40 -
@@ -1,5 +1,5 @@
-MD5 (subversion-1.7.2.tar.bz2) = Hl3//Se+CAZy5aBCVkNoqA==
-RMD160 (subversion-1.7.2.tar.bz2) = DSDjZMEg2kVPMTnpXT7IbCLn48E=
-SHA1 (subversion-1.7.2.tar.bz2) = jAgkrrf0LaH/T3zSlod69/WYErs=
-SHA256 (subversion-1.7.2.tar.bz2) =
frPhrisDheHMIMqeGDng7wrJinRV3FK6TN9WdUe/xRc=
-SIZE (subversion-1.7.2.tar.bz2) = 5944987
+MD5 (subversion-1.7.3.tar.bz2) = hn+wpdsAcQz43OC9+glLOw==
+RMD160 (subversion-1.7.3.tar.bz2) = rJoVGfJAeQNvQhfOUHw8RBU/hqc=
+SHA1 (subversion-1.7.3.tar.bz2) = Yk1AcDYcDo189PXGZ2KeckWbEi0=
+SHA256 (subversion-1.7.3.tar.bz2) =
9orI+WBHotd3UIXYyXlUV/6yTa+iGsH96vo7OdES/Q4=
+SIZE (subversion-1.7.3.tar.bz2) = 5956842
Index: pkg/PLIST-ap2
===
RCS file: /cvs/ports/devel/subversion/pkg/PLIST-ap2,v
retrieving revision 1.5
diff -u -p -r1.5 PLIST-ap2
--- pkg/PLIST-ap2 26 Feb 2010 18:21:09 - 1.5
+++ pkg/PLIST-ap2 13 Feb 2012 17:54:54 -
@@ -4,3 +4,4 @@ include/subversion-1/mod_authz_svn.h
include/subversion-1/mod_dav_svn.h
lib/apache2/mod_authz_svn.so
lib/apache2/mod_dav_svn.so
+lib/apache2/mod_dontdothat.so
Re: NEW: net/p5-XML-RPC
Submitting again after unlock. http://marc.info/?l=openbsd-portsm=132744123916171w=2 Ok? On Tue, Jan 24, 2012 at 09:35:01PM +, Mikolaj Kucharski wrote: Resubmit. Tested on -current again. All tests successful. Files=2, Tests=2, 1 wallclock secs ( 0.06 usr 0.14 sys + 0.10 cusr 0.38 csys = 0.68 CPU) Result: PASS On Sun, Jan 16, 2011 at 04:11:16PM +, Mikolaj Kucharski wrote: Comments, okays? Regress passes. XML::RPC module provides simple Pure Perl methods for XML-RPC communication. It's goals are simplicity and flexibility. XML::RPC uses XML::TreePP for parsing. -- best regards q#
new: pecl-http-1.7.1
Attached is a new port for the pecl http extension. My first time packaging a pecl extension, coments welcome. Information for inst:pecl-http-1.7.1 Comment: extended http support Description: The HTTP extension aims to provide a convenient and powerful set of functionality for major applications. The HTTP extension eases handling of HTTP URLs, dates, redirects, headers and messages in a HTTP context (both incoming and outgoing). It also provides means for client negotiation of preferred language and charset, as well as a convenient way to exchange arbitrary data with caching and resuming capabilities. Also provided is a powerful request and parallel interface (PHP 5+), if the extension is built with cURL support. WWW: http://pecl.php.net/package/pecl_http -- James Turner ja...@calminferno.net pecl-http.tar Description: Unix tar archive
Enable tools build in devel/chmlib
devel/chmlib has some useful example programs, but we don't build them
by default. This patch enables them in the build.
ok?
Index: Makefile
===
RCS file: /cvs/ports/devel/chmlib/Makefile,v
retrieving revision 1.9
diff -N -u -p Makefile
--- Makefile8 Mar 2011 20:15:26 - 1.9
+++ Makefile17 Feb 2012 03:06:48 -
@@ -7,13 +7,14 @@ HOMEPAGE= http://www.jedrea.com/chmlib/
MASTER_SITES= ${HOMEPAGE}
DISTNAME= chmlib-0.40
+REVISION = 0
SHARED_LIBS += chm 0.2 # .0.0
CONFIGURE_STYLE=gnu
USE_LIBTOOL= Yes
# stupid linux shit
-CONFIGURE_ARGS=--disable-io64
+CONFIGURE_ARGS = --disable-io64 --enable-examples
WANTLIB= pthread
Index: pkg/PLIST
===
RCS file: /cvs/ports/devel/chmlib/pkg/PLIST,v
retrieving revision 1.2
diff -N -u -p pkg/PLIST
--- pkg/PLIST 19 Jun 2006 18:14:59 - 1.2
+++ pkg/PLIST 17 Feb 2012 03:06:48 -
@@ -1,5 +1,10 @@
@comment $OpenBSD: PLIST,v 1.2 2006/06/19 18:14:59 bernd Exp $
%%SHARED%%
+@bin bin/chm_http
+@bin bin/enum_chmLib
+@bin bin/enumdir_chmLib
+@bin bin/extract_chmLib
+@bin bin/test_chmLib
include/chm_lib.h
include/lzx.h
lib/libchm.a
Update homepage for comms/bottlerocket
Current homepage for comms/bottlerocket is dead. Last entry in the
web archive was we've moved to this location.
ok?
Index: Makefile
===
RCS file: /cvs/ports/comms/bottlerocket/Makefile,v
retrieving revision 1.6
diff -N -u -p Makefile
--- Makefile3 Sep 2010 14:39:07 - 1.6
+++ Makefile3 Feb 2012 04:16:59 -
@@ -3,11 +3,11 @@
COMMENT= X.10 firecracker interface
DISTNAME= bottlerocket-0.04c
-REVISION= 0
+REVISION = 1
CATEGORIES=comms
-HOMEPAGE= http://mlug.missouri.edu/~tymm/
-MASTER_SITES= ${HOMEPAGE}
+HOMEPAGE = http://www.linuxha.com/bottlerocket/
+MASTER_SITES = ${HOMEPAGE}
CONFIGURE_STYLE=gnu
new: databases/pear-MDB2-pgsql-1.4.1
pear-MDB2-pgsql is the PostgreSQL MDB2 driver. This module is needed for www/horde when using a Postgresql backend with php-5.3. I will submit a diff for horde in a separate e-mail to fix this. .jh pear-MDB2-pgsql.tar.gz Description: GNU Zip compressed data
