Re: More automation question.
Hi JP, In HD, instead of write or touch mode, there's a trim mode that adjusts everything according to the delta value of the fader (or the difference between 0 dB and the new fader position). In other words, let's say your actual automation had a fader at minus 10 dB. When you get into trim mode and adjust the fader to be three decibels lower, the new fader automation would be at minus 13 decibels and any subsequent fader moves would be proportionately three decibels lower than the original values. That's it in a nutshell. Slau > On Sep 3, 2017, at 10:35 AM, Juan Pablo Culasso Alonso > wrote: > > Amazing, Slau. > It worked greatly. > Just for know, how works the trim automation in HD? > > JP >> On 3 Sep 2017, at 10:55, Slau Halatyn wrote: >> >> I would say the best thing to do is to simply redo the automation in the >> section you want. Make a selection of the range, turn on pre and post roll >> and set the automation mode to Write. Make a pass and see if you're happy >> with it. If not, set it to write mode again and repeat until you're >> satisfied. >> Hope that helps. >> >>> On Sep 2, 2017, at 11:59 PM, Juan Pablo Culasso Alonso >>> wrote: >>> >>> Hi, Slau. >>> Thanks for your explanation. >>> >>> Do you know other approach to achieve that? Really jump to a Hd version are >>> not in the horizon. I tried with some fades but the ressult is too far that >>> I need. >>> >>> JP. On 2 Sep 2017, at 21:08, Slau Halatyn wrote: JP, This mode is called Trim mode and I think it's only available in HD. All values are proportionally raised or lowered by whatever amount the fader is moved in Trim Mode. There might be a way to visually select several volume break points but I know of no way to do that without visually editing within the timeline. Slau > On Sep 2, 2017, at 10:36 AM, Juan Pablo Culasso Alonso > wrote: > > Hello all. > > I've been wondering this for quite some time now...I'm not even sure if > it's possible. Let's say in the middle of mixing a track, I want to fade > some selection down at a certain point, and then fade them back up. I'd > normally do this with volume automation. However, let's say a week later > I want to change the overall volume of that track, but keep the > automation. Is this possible? Whenever I try to change the volume on a > track where automation is written, it slides the fader back to its > original position. I guess I'm wondering if there's a way to > proportionaly keep the automation in relation to the volume changes. Any > help would be greatly appreciated. Thanks > JP > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Flotools - possible bugs.
Ah, so everything's OK. > On Sep 3, 2017, at 2:44 PM, Ricky Prevatte wrote: > > I have not done any key reset or macros. Just started using ProTools and my > control surface again. I upgraded to the latest version of flow tools. I was > missing other keystrokes but after restarting voiceover and the computer they > came back. I did not make a note of those. > > Ricky Prevatte LMBT1154 > >> On Sep 3, 2017, at 9:57 AM, Slau Halatyn wrote: >> >> which key changed? Double-tapping Option+Shift+t deselects all tracks and >> that has always been the case. Is it not working for you? Do you have any >> other macros using that key combination? >> >>> On Sep 2, 2017, at 5:03 PM, Ricky Prevatte wrote: >>> >>> A little silly question to go along with this how do we find out about >>> selected tracks? I cannot deselect all as well has that key changed. Just >>> started using flow tools this week again. >>> >>> Ricky Prevatte LMBT1154 >>> On Sep 1, 2017, at 4:44 PM, Juan Pablo Culasso Alonso wrote: Hello all, I will put on the table different situations, tell me if are bugs or the bug is me ?P Before starting, I am running the latest protools 12.8.1 The window is completely maximized. 1. The sortcut to resize the track list is not working. 2 The sorcut to resize the clip list, when pressed, a keyboard maestro dialog apeare asking me to decide which macro I want to call, move mouse to the center of window or resize clip list. 3 Dragging clips to a track. When I do the last sorcut command+option+list+, this message apeare: Keyboard Maestro Engine Macro Cancelled Move or Click Mouse calculation point2.x+point2.width failed. Macro ‘Beta: Drag Clip’ cancelled (while executing Move and Click and Drag I tried it several times without success. Finally, there is a conflit with sorcuts when panning change is necessary, again, keyboard maestro ask for chosing panning or move the mouse to the left or right. Anyone can duplicate these? Best, Juan. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
using Boom / other plug-ins
hi all when inserting , say Boom onto a track , is the plug’s interface opened in controls/automatable parameters view? how can I switch to the native interface in order to select a sound for every drum slot? huge thanks Roy. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Flotools - possible bugs.
I have not done any key reset or macros. Just started using ProTools and my control surface again. I upgraded to the latest version of flow tools. I was missing other keystrokes but after restarting voiceover and the computer they came back. I did not make a note of those. Ricky Prevatte LMBT1154 > On Sep 3, 2017, at 9:57 AM, Slau Halatyn wrote: > > which key changed? Double-tapping Option+Shift+t deselects all tracks and > that has always been the case. Is it not working for you? Do you have any > other macros using that key combination? > >> On Sep 2, 2017, at 5:03 PM, Ricky Prevatte wrote: >> >> A little silly question to go along with this how do we find out about >> selected tracks? I cannot deselect all as well has that key changed. Just >> started using flow tools this week again. >> >> Ricky Prevatte LMBT1154 >> >>> On Sep 1, 2017, at 4:44 PM, Juan Pablo Culasso Alonso >>> wrote: >>> >>> Hello all, >>> >>> >>> I will put on the table different situations, tell me if are bugs or the >>> bug is me ?P >>> >>> Before starting, >>> I am running the latest protools 12.8.1 >>> >>> The window is completely maximized. >>> >>> 1. >>> The sortcut to resize the track list is not working. >>> >>> 2 >>> The sorcut to resize the clip list, when pressed, a keyboard maestro dialog >>> apeare asking me to decide which macro I want to call, move mouse to the >>> center of window or resize clip list. >>> >>> 3 >>> Dragging clips to a track. >>> When I do the last sorcut command+option+list+, this message apeare: >>> Keyboard Maestro Engine Macro Cancelled Move or Click Mouse calculation >>> point2.x+point2.width failed. Macro ‘Beta: Drag Clip’ cancelled (while >>> executing Move and Click and Drag >>> >>> I tried it several times without success. >>> >>> Finally, there is a conflit with sorcuts when panning change is necessary, >>> again, keyboard maestro ask for chosing panning or move the mouse to the >>> left or right. >>> >>> Anyone can duplicate these? >>> >>> Best, >>> Juan. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: More automation question.
Amazing, Slau. It worked greatly. Just for know, how works the trim automation in HD? JP > On 3 Sep 2017, at 10:55, Slau Halatyn wrote: > > I would say the best thing to do is to simply redo the automation in the > section you want. Make a selection of the range, turn on pre and post roll > and set the automation mode to Write. Make a pass and see if you're happy > with it. If not, set it to write mode again and repeat until you're satisfied. > Hope that helps. > >> On Sep 2, 2017, at 11:59 PM, Juan Pablo Culasso Alonso >> wrote: >> >> Hi, Slau. >> Thanks for your explanation. >> >> Do you know other approach to achieve that? Really jump to a Hd version are >> not in the horizon. I tried with some fades but the ressult is too far that >> I need. >> >> JP. >>> On 2 Sep 2017, at 21:08, Slau Halatyn wrote: >>> >>> JP, >>> This mode is called Trim mode and I think it's only available in HD. All >>> values are proportionally raised or lowered by whatever amount the fader is >>> moved in Trim Mode. There might be a way to visually select several volume >>> break points but I know of no way to do that without visually editing >>> within the timeline. >>> Slau >>> On Sep 2, 2017, at 10:36 AM, Juan Pablo Culasso Alonso wrote: Hello all. I've been wondering this for quite some time now...I'm not even sure if it's possible. Let's say in the middle of mixing a track, I want to fade some selection down at a certain point, and then fade them back up. I'd normally do this with volume automation. However, let's say a week later I want to change the overall volume of that track, but keep the automation. Is this possible? Whenever I try to change the volume on a track where automation is written, it slides the fader back to its original position. I guess I'm wondering if there's a way to proportionaly keep the automation in relation to the volume changes. Any help would be greatly appreciated. Thanks JP -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Flotools - possible bugs.
which key changed? Double-tapping Option+Shift+t deselects all tracks and that has always been the case. Is it not working for you? Do you have any other macros using that key combination? > On Sep 2, 2017, at 5:03 PM, Ricky Prevatte wrote: > > A little silly question to go along with this how do we find out about > selected tracks? I cannot deselect all as well has that key changed. Just > started using flow tools this week again. > > Ricky Prevatte LMBT1154 > >> On Sep 1, 2017, at 4:44 PM, Juan Pablo Culasso Alonso >> wrote: >> >> Hello all, >> >> >> I will put on the table different situations, tell me if are bugs or the >> bug is me ?P >> >> Before starting, >> I am running the latest protools 12.8.1 >> >> The window is completely maximized. >> >> 1. >> The sortcut to resize the track list is not working. >> >> 2 >> The sorcut to resize the clip list, when pressed, a keyboard maestro dialog >> apeare asking me to decide which macro I want to call, move mouse to the >> center of window or resize clip list. >> >> 3 >> Dragging clips to a track. >> When I do the last sorcut command+option+list+, this message apeare: >> Keyboard Maestro Engine Macro Cancelled Move or Click Mouse calculation >> point2.x+point2.width failed. Macro ‘Beta: Drag Clip’ cancelled (while >> executing Move and Click and Drag >> >> I tried it several times without success. >> >> Finally, there is a conflit with sorcuts when panning change is necessary, >> again, keyboard maestro ask for chosing panning or move the mouse to the >> left or right. >> >> Anyone can duplicate these? >> >> Best, >> Juan. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: More automation question.
I would say the best thing to do is to simply redo the automation in the section you want. Make a selection of the range, turn on pre and post roll and set the automation mode to Write. Make a pass and see if you're happy with it. If not, set it to write mode again and repeat until you're satisfied. Hope that helps. > On Sep 2, 2017, at 11:59 PM, Juan Pablo Culasso Alonso > wrote: > > Hi, Slau. > Thanks for your explanation. > > Do you know other approach to achieve that? Really jump to a Hd version are > not in the horizon. I tried with some fades but the ressult is too far that I > need. > > JP. >> On 2 Sep 2017, at 21:08, Slau Halatyn wrote: >> >> JP, >> This mode is called Trim mode and I think it's only available in HD. All >> values are proportionally raised or lowered by whatever amount the fader is >> moved in Trim Mode. There might be a way to visually select several volume >> break points but I know of no way to do that without visually editing within >> the timeline. >> Slau >> >>> On Sep 2, 2017, at 10:36 AM, Juan Pablo Culasso Alonso >>> wrote: >>> >>> Hello all. >>> >>> I've been wondering this for quite some time now...I'm not even sure if >>> it's possible. Let's say in the middle of mixing a track, I want to fade >>> some selection down at a certain point, and then fade them back up. I'd >>> normally do this with volume automation. However, let's say a week later I >>> want to change the overall volume of that track, but keep the automation. >>> Is this possible? Whenever I try to change the volume on a track where >>> automation is written, it slides the fader back to its original position. I >>> guess I'm wondering if there's a way to proportionaly keep the automation >>> in relation to the volume changes. Any help would be greatly appreciated. >>> Thanks >>> JP >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
