Re: Running a project studio without a control surface?

[CHUCK REICHEL]

Hi Nate,
With out some kind of a fader How can you do a fade with floe tools?
May be I'm missing something?
Hit me up off list if you want.
Chuck
"God does not play dice with the universe"
"Albert Einstein’


On Oct 24, 2017, at 7:40 PM, Nathaniel Kile wrote:

> Hello guys,
> For some reason these messages went in my junk folder.
> I will have to look at flow tools as I get back into upgrading the setup. I 
> did not know if I could use the 003 strictly as a controller, I don’t want to 
> run my interface through VIA the 003 optical because I will still be hampered 
> by the fire wire limitations, and I want to be able to take advantage of 
> thunderbolt speed. If I can use both then I would probably consider keeping 
> the 003 as the controller.
>  
>  
>  
> Nate Kile,
> Assistive Technology Instructor, Tech Vision
> Specialist in Technology/Training/Teaching for blind/low vision/virtual 
> instruction for schools
> Also Private training to your needs
> 907-444-3707
> Website with hundreds of informational articles & lessons on PC, Office 
> products, Mac, iPad/iTools and more, all done with 
> keystrokes:www.yourtechvision.com
>  
>  
> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf 
> Of TheOreoMonster
> Sent: Saturday, October 21, 2017 5:14 PM
> To: ptaccess@googlegroups.com
> Subject: Re: Running a project studio without a control surface?
>  
> Unless you are selling the 003 to fund other upgrades, Can yo u not still use 
> it as a surface even if you don’t use its interface?
>  
> On Oct 21, 2017, at 3:26 PM, Nathaniel Kile  wrote:
>  
> Hello everyone, I am in the process of reopening my project studio.
> In the past I always had a control surface, I still have my 003, but am going 
> to be moving on and upgrading, I don’t want to lose the efficiency and 
> workflow that I gained with the surface, does anyone have any thoughts on 
> this? Has anyone sacrificed the surface and found workflow still as efficient?
> Thanks for any thoughts, 
>  
> Nate Kile,
> Assistive Technology Instructor, Tech Vision 
> Specialist in Technology/Training/Teaching for blind/low vision/virtual 
> instruction for schools
> Also Private training to your needs
> 907-444-3707
> Website with hundreds of informational articles & lessons on PC, Office 
> products, Mac, iPad/iTools and more, all done with keystrokes: 
> www.yourtechvision.com
>  
>  
>  
>  
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>  
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: What are the limitations with the UA Apollo Gear

[Nathaniel Kile]

Hey,

Thanks for letting me know.

 

 

 

Nate Kile,

Assistive Technology Instructor, Tech Vision 

Specialist in Technology/Training/Teaching for blind/low vision/virtual 
instruction for schools

Also Private training to your needs

907-444-3707

Website with hundreds of informational articles & lessons on PC, Office 
products, Mac, iPad/iTools and more, all done with keystrokes:  
 www.yourtechvision.com 

 

 

From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of 
Steve Martin
Sent: Saturday, October 21, 2017 10:01 AM
To: ptaccess@googlegroups.com
Subject: Re: What are the limitations with the UA Apollo Gear

 

The Plug ins are generally accessible however, the unison technelogy part of it 
on their interfaces is not accessible.  That means if you get an Apollo 
interface the part where you select a mic preamp and adjust the settings of the 
preamp you would like to emulate is not accessible. So if you just want to use 
the plugins in your DAW you can get a UAD satellite card instead of the apolo 
and use the Apogee element as as your interface. 

Sent from my iPhone


On Oct 21, 2017, at 11:03 AM, Nathaniel Kile mailto:heavens4r...@gmail.com> > wrote:

Hello friends,

I am still shopping and investigating new interfaces. I have been taking long 
hard looks at both the Apogee Elements, along with the Newer Apollo gear. 

I have briefly come across posts discussing the limitations of accessibility 
with Voice Over and the Apollo interfaces. Can somebody please give me a 
breakdown of the limitations. I don’t want to drop a few grand on an Apollo, 
only to feel very frustrated. The Element looks really nice, but then again so 
does UA and I have been a fan of UA gear for many years now.

Thanks for any input,

 

Nate Kile,

Assistive Technology Instructor, Tech Vision 

Specialist in Technology/Training/Teaching for blind/low vision/virtual 
instruction for schools

Also Private training to your needs

907-444-3707

Website with hundreds of informational articles & lessons on PC, Office 
products, Mac, iPad/iTools and more, all done with keystrokes: 
www.yourtechvision.com   

 

 

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com 
 .
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com 
 .
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: Running a project studio without a control surface?

[Nathaniel Kile]

Hello guys,

For some reason these messages went in my junk folder.

I will have to look at flow tools as I get back into upgrading the setup. I did 
not know if I could use the 003 strictly as a controller, I don’t want to run 
my interface through VIA the 003 optical because I will still be hampered by 
the fire wire limitations, and I want to be able to take advantage of 
thunderbolt speed. If I can use both then I would probably consider keeping the 
003 as the controller.

 

 

 

Nate Kile,

Assistive Technology Instructor, Tech Vision 

Specialist in Technology/Training/Teaching for blind/low vision/virtual 
instruction for schools

Also Private training to your needs

907-444-3707

Website with hundreds of informational articles & lessons on PC, Office 
products, Mac, iPad/iTools and more, all done with keystrokes:  
 www.yourtechvision.com 

 

 

From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of 
TheOreoMonster
Sent: Saturday, October 21, 2017 5:14 PM
To: ptaccess@googlegroups.com
Subject: Re: Running a project studio without a control surface?

 

Unless you are selling the 003 to fund other upgrades, Can yo u not still use 
it as a surface even if you don’t use its interface?

 

On Oct 21, 2017, at 3:26 PM, Nathaniel Kile mailto:heavens4r...@gmail.com> > wrote:

 

Hello everyone, I am in the process of reopening my project studio.

In the past I always had a control surface, I still have my 003, but am going 
to be moving on and upgrading, I don’t want to lose the efficiency and workflow 
that I gained with the surface, does anyone have any thoughts on this? Has 
anyone sacrificed the surface and found workflow still as efficient?

Thanks for any thoughts, 

 

Nate Kile,

Assistive Technology Instructor, Tech Vision 

Specialist in Technology/Training/Teaching for blind/low vision/virtual 
instruction for schools

Also Private training to your needs

907-444-3707

Website with hundreds of informational articles & lessons on PC, Office 
products, Mac, iPad/iTools and more, all done with keystrokes:  
 www.yourtechvision.com

 

 

 

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to   
ptaccess+unsubscr...@googlegroups.com.
For more options, visit   
https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com 
 .
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: someone in Miami.

[CHUCK REICHEL]

Hi Julián,
I live in Sunrise FL just above Miami.
Hit me up off list and we'll chat about pro tools. :)
Chuck


On Oct 24, 2017, at 2:20 PM, Julián Alejandro Argoti wrote:

> Hello, I want to thank you all for allowing me to be part of this
> list, I believe that I am the only Hispanic here. I am from Colombia
> and now I am planning
> to travel to Miami to study for a while.
> I want to know if you know someone who lives in Miami and can teach me
> pro tools from the beginning, I have some knowledge of production but
> I have never
> used pro tools now that we have the flo tools scripts I want to learn.
> My goald is to study at Berklee in Boston, but in the meantime I want
> to go learning something and start recording with pro tools.
> Thank you very much, I am attentive to any comments.
> Julián Argoti
> www.youtube.com/julianargotioficial
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

someone in Miami.

[Julián Alejandro Argoti]

Hello, I want to thank you all for allowing me to be part of this
list, I believe that I am the only Hispanic here. I am from Colombia
and now I am planning
to travel to Miami to study for a while.
I want to know if you know someone who lives in Miami and can teach me
pro tools from the beginning, I have some knowledge of production but
I have never
used pro tools now that we have the flo tools scripts I want to learn.
My goald is to study at Berklee in Boston, but in the meantime I want
to go learning something and start recording with pro tools.
Thank you very much, I am attentive to any comments.
Julián Argoti
www.youtube.com/julianargotioficial

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Plug-in Views - SD2 - Computer ID

[Slau Halatyn]

Heh, Martin, you have no idea how much time I've spent on this upcoming 
release… You'll see why when it's finally out :) Coming soon.
Slau

> On Oct 24, 2017, at 4:21 AM, Martin (Punky) Sopart  wrote:
> 
> Hi Slau!
> 
> That's ok. It was just a question.
> Hoping that there is not that much work to do for the id thing.
> 
> So you better spend your time for the next upcoming Flo Tools version. :-)
> Play lists, selected tracks and maybe enhanced recognition of buttons etc.
> 
> Best! / Martin
>> -Original Message-
>> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
>> On Behalf Of Slau Halatyn
>> Sent: Monday, October 23, 2017 6:34 PM
>> To: PTAccess List 
>> Subject: Re: Plug-in Views - SD2 - Computer ID
>> 
>> Hi Martin,
>> 
>> Last year when I first got into Superior Drummer, the registration process
>> was easy online but that whole Computer ID thing was the challenge, so to
>> speak. At the time, I didn't know how to utilize the image recognition aspect
>> of Keyboard Maestro. What Phil is suggesting could probably work for the
>> Mac side of things but, rather than pursuing it from that angle, I'm going to
>> create a set of macros that will more reliably and accurately detect buttons
>> and text and the status of those items. Thing is, I don't know exactly when 
>> I'll
>> have the time to create those macros as there are so many other such
>> projects on the burners these days. To be honest, with a little sighted
>> assistance, it takes a matter of minutes to go through those processes and,
>> once done, you pretty much don't have to deal with tricky things after that.
>> As far as the plug-in views, again, that was something I did before I knew
>> how to get even better results. For now, those plug-in views will get you
>> going but it would be nice to redo them the way I'm handling other plug-ins
>> now. Again, time is my only enemy.
>> ;)
>> 
>>> On Oct 23, 2017, at 10:42 AM, Martin (Punky) Sopart
>>  wrote:
>>> 
>>> Hello Slau and list!
>>> 
>>> Using your great plug-in views I'm able to find a pup-up called "Help".
>>> Do you know if it's possible to start the so called offline registration via
>>> that pop-up?
>>> Maybe also the computer id could be retrieved by that way.
>>> Having that id the installation and registration of sD2 could be possible
>>> for blind users.
>>> 
>>> Thanks and best! / Martin
>>> 
>>> 
>>> --
>>> You received this message because you are subscribed to the Google
>> Groups "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: Plug-in Views - SD2 - Computer ID

[Martin (Punky) Sopart]

Hi Slau!

That's ok. It was just a question.
Hoping that there is not that much work to do for the id thing.

So you better spend your time for the next upcoming Flo Tools version. :-)
Play lists, selected tracks and maybe enhanced recognition of buttons etc.

Best! / Martin
> -Original Message-
> From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com]
> On Behalf Of Slau Halatyn
> Sent: Monday, October 23, 2017 6:34 PM
> To: PTAccess List 
> Subject: Re: Plug-in Views - SD2 - Computer ID
> 
> Hi Martin,
> 
> Last year when I first got into Superior Drummer, the registration process
> was easy online but that whole Computer ID thing was the challenge, so to
> speak. At the time, I didn't know how to utilize the image recognition aspect
> of Keyboard Maestro. What Phil is suggesting could probably work for the
> Mac side of things but, rather than pursuing it from that angle, I'm going to
> create a set of macros that will more reliably and accurately detect buttons
> and text and the status of those items. Thing is, I don't know exactly when 
> I'll
> have the time to create those macros as there are so many other such
> projects on the burners these days. To be honest, with a little sighted
> assistance, it takes a matter of minutes to go through those processes and,
> once done, you pretty much don't have to deal with tricky things after that.
> As far as the plug-in views, again, that was something I did before I knew
> how to get even better results. For now, those plug-in views will get you
> going but it would be nice to redo them the way I'm handling other plug-ins
> now. Again, time is my only enemy.
> ;)
> 
> > On Oct 23, 2017, at 10:42 AM, Martin (Punky) Sopart
>  wrote:
> >
> > Hello Slau and list!
> >
> > Using your great plug-in views I'm able to find a pup-up called "Help".
> > Do you know if it's possible to start the so called offline registration via
> > that pop-up?
> > Maybe also the computer id could be retrieved by that way.
> > Having that id the installation and registration of sD2 could be possible
> > for blind users.
> >
> > Thanks and best! / Martin
> >
> >
> > --
> > You received this message because you are subscribed to the Google
> Groups "Pro Tools Accessibility" group.
> > To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+unsubscr...@googlegroups.com.
> > For more options, visit https://groups.google.com/d/optout.
> 
> --
> You received this message because you are subscribed to the Google Groups
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.