Re: Flotools and Protools question

[Slau Halatyn]

That's an Inspector command so you have to enable the Inspector mode with the 
Forward Slash key.
HTH
Slau

> On Feb 18, 2018, at 12:09 PM, Christian  wrote:
> 
> Hi again,
> 
> Just a question, if I have the mix window open and navigate to a track with 
> VO and then press t, shouldn’t the name of that track be spoken?
> Nothing happens when I try to do that.
> 
> Many thanks,
> Christian
> 
>> 18 feb. 2018 kl. 17:00 skrev Ignasi Cambra :
>> 
>> You can leave macOS in whatever language you want. That shouldn’t be a 
>> problem.
>> 
>> Sent from my iPhone
>> 
>>> On 18 Feb 2018, at 16:26, Christian  wrote:
>>> 
>>> Hi,
>>> 
>>> I will use Protools in English, but I was referring to the display language 
>>> of my Mac OS. I have however added English US as an input source.
>>> 
>>> Best regards and thanks,
>>> Christian
>>> 
 18 feb. 2018 kl. 14:12 skrev Ignasi Cambra :
 
 If I were you I would stick to the English version of Pro Tools, if that’s 
 what you mean by display language. It’s OK if your operating system is in 
 a language other than English, but I think using Flo Tools with ProTools 
 in a different language will give you trouble.
 
 Sent from my iPhone
 
> On 18 Feb 2018, at 13:11, Slau Halatyn  wrote:
> 
> By default, tracks are set to medium height when they're created. If you 
> need to change or verify that tracks are set to the same height,navigate 
> to a track in the Edit window (not in the Track List table but in the 
> main part of the window). Interact with the track and use the track 
> options button to pop up a menu which contains track height as a sub 
> menu. Depending on the track height to begin with, track height might be 
> at the top layer or within a sub menu. If you want to apply the track 
> height to all tracks, use the Flo Mouse Option-click to get into the menu 
> and select the height.
> Regarding keyboard language versus display language, other users might 
> chime in.
> HTH,
> Slau
> 
>> On Feb 17, 2018, at 8:09 PM, Christian  wrote:
>> 
>> Hi all,
>> 
>> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
>> question.
>> Where do I set track heights to medium?
>> And at last, if my display language is not set to English US, but my 
>> keyboard is set to it, is that fine or should the display language also 
>> be set?
>> 
>> Many thanks,
>> Christian
>> 
>> -- 
>> You received this message because you are subscribed to the Google 
>> Groups "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send 
>> an email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 "Pro Tools Accessibility" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to ptaccess+unsubscr...@googlegroups.com.
 For more options, visit https://groups.google.com/d/optout.
 
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Learning Protools question

[Christian]

Hi all,

OK, so I now have figured out how to play, record and a few other things  in 
Protools and Flotools. But, has anyone some good recommendations on how I can 
learn Protools, if there are any tutorials or whatever so that one can get into 
it more quicker?

Best regards and thanks,
Christian

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Christian]

Hi again,

Just a question, if I have the mix window open and navigate to a track with VO 
and then press t, shouldn’t the name of that track be spoken?
Nothing happens when I try to do that.

Many thanks,
Christian

> 18 feb. 2018 kl. 17:00 skrev Ignasi Cambra :
> 
> You can leave macOS in whatever language you want. That shouldn’t be a 
> problem.
> 
> Sent from my iPhone
> 
>> On 18 Feb 2018, at 16:26, Christian  wrote:
>> 
>> Hi,
>> 
>> I will use Protools in English, but I was referring to the display language 
>> of my Mac OS. I have however added English US as an input source.
>> 
>> Best regards and thanks,
>> Christian
>> 
>>> 18 feb. 2018 kl. 14:12 skrev Ignasi Cambra :
>>> 
>>> If I were you I would stick to the English version of Pro Tools, if that’s 
>>> what you mean by display language. It’s OK if your operating system is in a 
>>> language other than English, but I think using Flo Tools with ProTools in a 
>>> different language will give you trouble.
>>> 
>>> Sent from my iPhone
>>> 
 On 18 Feb 2018, at 13:11, Slau Halatyn  wrote:
 
 By default, tracks are set to medium height when they're created. If you 
 need to change or verify that tracks are set to the same height,navigate 
 to a track in the Edit window (not in the Track List table but in the main 
 part of the window). Interact with the track and use the track options 
 button to pop up a menu which contains track height as a sub menu. 
 Depending on the track height to begin with, track height might be at the 
 top layer or within a sub menu. If you want to apply the track height to 
 all tracks, use the Flo Mouse Option-click to get into the menu and select 
 the height.
 Regarding keyboard language versus display language, other users might 
 chime in.
 HTH,
 Slau
 
> On Feb 17, 2018, at 8:09 PM, Christian  wrote:
> 
> Hi all,
> 
> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
> question.
> Where do I set track heights to medium?
> And at last, if my display language is not set to English US, but my 
> keyboard is set to it, is that fine or should the display language also 
> be set?
> 
> Many thanks,
> Christian
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 "Pro Tools Accessibility" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to ptaccess+unsubscr...@googlegroups.com.
 For more options, visit https://groups.google.com/d/optout.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Ignasi Cambra]

You can leave macOS in whatever language you want. That shouldn’t be a problem.

Sent from my iPhone

> On 18 Feb 2018, at 16:26, Christian  wrote:
> 
> Hi,
> 
> I will use Protools in English, but I was referring to the display language 
> of my Mac OS. I have however added English US as an input source.
> 
> Best regards and thanks,
> Christian
> 
>> 18 feb. 2018 kl. 14:12 skrev Ignasi Cambra :
>> 
>> If I were you I would stick to the English version of Pro Tools, if that’s 
>> what you mean by display language. It’s OK if your operating system is in a 
>> language other than English, but I think using Flo Tools with ProTools in a 
>> different language will give you trouble.
>> 
>> Sent from my iPhone
>> 
>>> On 18 Feb 2018, at 13:11, Slau Halatyn  wrote:
>>> 
>>> By default, tracks are set to medium height when they're created. If you 
>>> need to change or verify that tracks are set to the same height,navigate to 
>>> a track in the Edit window (not in the Track List table but in the main 
>>> part of the window). Interact with the track and use the track options 
>>> button to pop up a menu which contains track height as a sub menu. 
>>> Depending on the track height to begin with, track height might be at the 
>>> top layer or within a sub menu. If you want to apply the track height to 
>>> all tracks, use the Flo Mouse Option-click to get into the menu and select 
>>> the height.
>>> Regarding keyboard language versus display language, other users might 
>>> chime in.
>>> HTH,
>>> Slau
>>> 
 On Feb 17, 2018, at 8:09 PM, Christian  wrote:
 
 Hi all,
 
 OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
 question.
 Where do I set track heights to medium?
 And at last, if my display language is not set to English US, but my 
 keyboard is set to it, is that fine or should the display language also be 
 set?
 
 Many thanks,
 Christian
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 "Pro Tools Accessibility" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to ptaccess+unsubscr...@googlegroups.com.
 For more options, visit https://groups.google.com/d/optout.
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Christian]

Hi,

I will use Protools in English, but I was referring to the display language of 
my Mac OS. I have however added English US as an input source.

Best regards and thanks,
Christian

> 18 feb. 2018 kl. 14:12 skrev Ignasi Cambra :
> 
> If I were you I would stick to the English version of Pro Tools, if that’s 
> what you mean by display language. It’s OK if your operating system is in a 
> language other than English, but I think using Flo Tools with ProTools in a 
> different language will give you trouble.
> 
> Sent from my iPhone
> 
>> On 18 Feb 2018, at 13:11, Slau Halatyn  wrote:
>> 
>> By default, tracks are set to medium height when they're created. If you 
>> need to change or verify that tracks are set to the same height,navigate to 
>> a track in the Edit window (not in the Track List table but in the main part 
>> of the window). Interact with the track and use the track options button to 
>> pop up a menu which contains track height as a sub menu. Depending on the 
>> track height to begin with, track height might be at the top layer or within 
>> a sub menu. If you want to apply the track height to all tracks, use the Flo 
>> Mouse Option-click to get into the menu and select the height.
>> Regarding keyboard language versus display language, other users might chime 
>> in.
>> HTH,
>> Slau
>> 
>>> On Feb 17, 2018, at 8:09 PM, Christian  wrote:
>>> 
>>> Hi all,
>>> 
>>> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
>>> question.
>>> Where do I set track heights to medium?
>>> And at last, if my display language is not set to English US, but my 
>>> keyboard is set to it, is that fine or should the display language also be 
>>> set?
>>> 
>>> Many thanks,
>>> Christian
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

AW: troubbles with activating flo mouse

['nico berth' via Pro Tools Accessibility]

Allrighty, thanks!

Best, nico.

 

Von: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] Im Auftrag 
von Slau Halatyn
Gesendet: Sonntag, 18. Februar 2018 13:06
An: PTAccess List 
Betreff: Re: troubbles with activating flo mouse

 

Unfortunately, the latest version had a problem with 2 missing macros. If you 
download and install the stand-alone Flo Mouse and Flo Num Pad, the two missing 
macros will be installed and you'll be good to go.

Slau

 

On Feb 18, 2018, at 6:33 AM, 'nico berth' via Pro Tools Accessibility 
 > wrote:

 

Hey Folks!

 

For some reason I can not activate flo mouse. When I hit cmd+/ it sais nothing 
– all other macros work fine. I followed the instructions on the manual, my flo 
tools version is the newest. Flo mouse doesn’t have to be installed seperatly 
with this version now – did I get that right?

Does someone have some suggestions what goes wrong there?

Best, Nico.

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to   
ptaccess+unsubscr...@googlegroups.com.
For more options, visit   
https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com 
 .
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Ignasi Cambra]

If I were you I would stick to the English version of Pro Tools, if that’s what 
you mean by display language. It’s OK if your operating system is in a language 
other than English, but I think using Flo Tools with ProTools in a different 
language will give you trouble.

Sent from my iPhone

> On 18 Feb 2018, at 13:11, Slau Halatyn  wrote:
> 
> By default, tracks are set to medium height when they're created. If you need 
> to change or verify that tracks are set to the same height,navigate to a 
> track in the Edit window (not in the Track List table but in the main part of 
> the window). Interact with the track and use the track options button to pop 
> up a menu which contains track height as a sub menu. Depending on the track 
> height to begin with, track height might be at the top layer or within a sub 
> menu. If you want to apply the track height to all tracks, use the Flo Mouse 
> Option-click to get into the menu and select the height.
> Regarding keyboard language versus display language, other users might chime 
> in.
> HTH,
> Slau
> 
>> On Feb 17, 2018, at 8:09 PM, Christian  wrote:
>> 
>> Hi all,
>> 
>> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
>> question.
>> Where do I set track heights to medium?
>> And at last, if my display language is not set to English US, but my 
>> keyboard is set to it, is that fine or should the display language also be 
>> set?
>> 
>> Many thanks,
>> Christian
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: Flotools and Protools question

[Slau Halatyn]

By default, tracks are set to medium height when they're created. If you need 
to change or verify that tracks are set to the same height,navigate to a track 
in the Edit window (not in the Track List table but in the main part of the 
window). Interact with the track and use the track options button to pop up a 
menu which contains track height as a sub menu. Depending on the track height 
to begin with, track height might be at the top layer or within a sub menu. If 
you want to apply the track height to all tracks, use the Flo Mouse 
Option-click to get into the menu and select the height.
Regarding keyboard language versus display language, other users might chime in.
HTH,
Slau

> On Feb 17, 2018, at 8:09 PM, Christian  wrote:
> 
> Hi all,
> 
> OK, so I’ve finally installed Flotools and Protools 2018 but I have a 
> question.
> Where do I set track heights to medium?
> And at last, if my display language is not set to English US, but my keyboard 
> is set to it, is that fine or should the display language also be set?
> 
> Many thanks,
> Christian
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: troubbles with activating flo mouse

[Slau Halatyn]

Unfortunately, the latest version had a problem with 2 missing macros. If you 
download and install the stand-alone Flo Mouse and Flo Num Pad, the two missing 
macros will be installed and you'll be good to go.
Slau

> On Feb 18, 2018, at 6:33 AM, 'nico berth' via Pro Tools Accessibility 
>  wrote:
> 
> Hey Folks!
>  
> For some reason I can not activate flo mouse. When I hit cmd+/ it sais 
> nothing – all other macros work fine. I followed the instructions on the 
> manual, my flo tools version is the newest. Flo mouse doesn’t have to be 
> installed seperatly with this version now – did I get that right?
> Does someone have some suggestions what goes wrong there?
> Best, Nico.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> .
> For more options, visit https://groups.google.com/d/optout 
> .

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

troubbles with activating flo mouse

['nico berth' via Pro Tools Accessibility]

Hey Folks!

 

For some reason I can not activate flo mouse. When I hit cmd+/ it sais
nothing - all other macros work fine. I followed the instructions on the
manual, my flo tools version is the newest. Flo mouse doesn't have to be
installed seperatly with this version now - did I get that right?

Does someone have some suggestions what goes wrong there?

Best, Nico.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: spectrasonics keyscape

[Tom Hessels]

Hi Vinny,

 

It would be very nice if you can add me to this dropbox folder.

 

Thanks a lot!

Tom.

 

From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of 
Vinny Pedulla
Sent: zaterdag 17 februari 2018 21:07
To: ptaccess@googlegroups.com
Subject: Re: spectrasonics keyscape

 

Hey Tom,
They are in the Pro Tools dropbox. If you’d like, we can add you… Let us know 
if that will work, or I can just zip them up and send them to you as well.

 

Thanks,

Vinny

Email: vinnypedu...@gmail.com


On Feb 17, 2018, at 12:48 PM, Tom Hessels  wrote:

Hi Slau,

 

Thank you for your quick response.

Can I contact Vinny via this list or is there another manor to get these .tfx 
viles?

 

Tom.

 

From: ptaccess@googlegroups.com [mailto:ptaccess@googlegroups.com] On Behalf Of 
Slau Halatyn
Sent: vrijdag 16 februari 2018 17:39
To: PTAccess List
Subject: Re: spectrasonics keyscape

 

Hi Tom,

 

There are presets available that were saved out to TFX format by Vinny Pedulla 
on this list. That would simply get to the factory presets without any ability 
to edit the patches. Through Komplete Kontrol, however, one can access 
parameters through the S series controller keyboard. It's a great library, 
although I think the LA Custom Grand is inferior but the rest of the products 
are fantastic.

HTH,

Slau

 

 

On Feb 16, 2018, at 10:49 AM, Tom Hessels  wrote:

 

Hi All,

Last week I heard a demo of spectrasonics keyscape. I was very impressed by the 
sound of the sampled keyboards.

But before I buy it (here in Holland it costs about 370 euros) I want to know 
if it is accessible.

Does somebody here use keyscape with pro tools or reaper?

I look out for you answers.

Tom.

 

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to   
ptaccess+unsubscr...@googlegroups.com.
For more options, visit   
https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.