Re: Urgent Question regarding FlowTools Inspector commands (Again)
Yes, everything started working fine after a couple of reboots. Thanks to everyone that provided suggestions and help. Sent from my iPhone > On Mar 4, 2019, at 7:52 PM, Michael Holmes wrote: > > Hey man. If you haven’t yet, try closing everything but Pro Tools, including > turning off wifi. It’s worth a shot to at least rule out other processes > conflicting. > > > Also, did you try the beta version of Apogee Control? If you did, that could > be a suspect as well. > Hope it starts workin for ya again. > > Best, > Mike > Sent from my iPhone > >> On 4 Mar 2019, at 18:06, Alex Coleman wrote: >> >> Thanks Slau, however, I have closed PT and reopened several times, as >> well as rebooted the computer a couple of times, with the same >> results. >> >> >>> On 3/4/19, Slau Halatyn wrote: >>> First, you never have to reinstall Flo Tools. Just a heads up so you don't >>> waste your time in the future. If you can't get double-tap commands to work, >>> simply restart and that usually clears up any quirks with the system whether >>> it's Flo Tools related or not. >>> HTH, >>> slau >>> >>> On Mar 4, 2019, at 5:27 PM, Alex Coleman wrote: My apologies for the repetition, as I know this, or a very similar issue, was discussed recently. However, I cannot readily locate the posts. I was working on a project 2 days ago, and everything was fine. However, when I open the same project today and attempt to use the double-tap flowtools inspector functions to do things like arm a track, turn on the metronome, enter a start location, etc., but the commands do not work. I've tried using option and page-up/down to make sure the tracks were scrolled into view, and even reinstalled the flowtools 2018.7 macros, but with no success. Any suggestions on what my problem may be and how to promptly correct it would be so greatly appreciated. I'm kind of dead in the water at this point. I'm using the Element 46 as my interface, and protools 2018.10, I believe. Thanks again. AC -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Recommendations for Accessible Mastering Plugin
Hi Alex, As for the pro bundle. I do use the pro sub harmonics from the bundle which is good. :) I've owned it for the last 2 years and find it to be to clinical! Its ok for mixing to an extent but when its time to master! I always seem to end up with the Waves l3-16 in the mastering chain. Heres 1 of the head guys at waves to contact if you need installation help; Rani Merom He'll have a tech to you faster than a •! :) As usual ask him about VoiceOver and the waves tool bar. Tell him Chuck sent you! ;) Talk soon On Mar 5, 2019, at 11:41 AM, Alex Coleman wrote: > Thanks to all for your prompt replies and suggestions. > > > On 3/5/19, Michael Holmes wrote: >> I highly concur with Slau. I’ve amassed a bunch of plugins in my first year >> of being a PT user, and the Pro Bundle has the majority of plugins I >> wouldn’t go without. >> >> Sent from my iPhone >> >>> On 5 Mar 2019, at 10:18, Slau Halatyn wrote: >>> >>> The pro series compressor, limiter and multi-band compressor, as part of >>> the Avid Complete Plug-in Bundle for fifty dollars per year (which >>> includes a bunch of other great plug-ins) is a great choice. >>> Slau >>> >>> On Mar 5, 2019, at 10:01 AM, Alex Coleman wrote: I'm wondering if anyone can recommend an accessible, high-quality plugin for mastering? When I was a Sonar user, I used Waves L2 and LinMB for limiting and multi-band compression. Now I need to find something that will work for me in Protools. Thanks for any suggestions or recommendations that you can provide. AC -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Recommendations for Accessible Mastering Plugin
Thanks to all for your prompt replies and suggestions. On 3/5/19, Michael Holmes wrote: > I highly concur with Slau. I’ve amassed a bunch of plugins in my first year > of being a PT user, and the Pro Bundle has the majority of plugins I > wouldn’t go without. > > Sent from my iPhone > >> On 5 Mar 2019, at 10:18, Slau Halatyn wrote: >> >> The pro series compressor, limiter and multi-band compressor, as part of >> the Avid Complete Plug-in Bundle for fifty dollars per year (which >> includes a bunch of other great plug-ins) is a great choice. >> Slau >> >> >>> On Mar 5, 2019, at 10:01 AM, Alex Coleman >>> wrote: >>> >>> I'm wondering if anyone can recommend an accessible, high-quality >>> plugin for mastering? >>> When I was a Sonar user, I used Waves L2 and LinMB for limiting and >>> multi-band compression. >>> Now I need to find something that will work for me in Protools. >>> Thanks for any suggestions or recommendations that you can provide. >>> AC >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Recommendations for Accessible Mastering Plugin
I highly concur with Slau. I’ve amassed a bunch of plugins in my first year of being a PT user, and the Pro Bundle has the majority of plugins I wouldn’t go without. Sent from my iPhone > On 5 Mar 2019, at 10:18, Slau Halatyn wrote: > > The pro series compressor, limiter and multi-band compressor, as part of the > Avid Complete Plug-in Bundle for fifty dollars per year (which includes a > bunch of other great plug-ins) is a great choice. > Slau > > >> On Mar 5, 2019, at 10:01 AM, Alex Coleman >> wrote: >> >> I'm wondering if anyone can recommend an accessible, high-quality >> plugin for mastering? >> When I was a Sonar user, I used Waves L2 and LinMB for limiting and >> multi-band compression. >> Now I need to find something that will work for me in Protools. >> Thanks for any suggestions or recommendations that you can provide. >> AC >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Recommendations for Accessible Mastering Plugin
The pro series compressor, limiter and multi-band compressor, as part of the Avid Complete Plug-in Bundle for fifty dollars per year (which includes a bunch of other great plug-ins) is a great choice. Slau > On Mar 5, 2019, at 10:01 AM, Alex Coleman > wrote: > > I'm wondering if anyone can recommend an accessible, high-quality > plugin for mastering? > When I was a Sonar user, I used Waves L2 and LinMB for limiting and > multi-band compression. > Now I need to find something that will work for me in Protools. > Thanks for any suggestions or recommendations that you can provide. > AC > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Urgent Question regarding FlowTools Inspector commands (Again)
At some point after a reboot, Alex's system started working normally again. He simply never got around to mentioning it here. All good. Slau > On Mar 4, 2019, at 7:52 PM, Michael Holmes wrote: > > Hey man. If you haven’t yet, try closing everything but Pro Tools, including > turning off wifi. It’s worth a shot to at least rule out other processes > conflicting. > > > Also, did you try the beta version of Apogee Control? If you did, that could > be a suspect as well. > Hope it starts workin for ya again. > > Best, > Mike > Sent from my iPhone > >> On 4 Mar 2019, at 18:06, Alex Coleman wrote: >> >> Thanks Slau, however, I have closed PT and reopened several times, as >> well as rebooted the computer a couple of times, with the same >> results. >> >> >>> On 3/4/19, Slau Halatyn wrote: >>> First, you never have to reinstall Flo Tools. Just a heads up so you don't >>> waste your time in the future. If you can't get double-tap commands to work, >>> simply restart and that usually clears up any quirks with the system whether >>> it's Flo Tools related or not. >>> HTH, >>> slau >>> >>> On Mar 4, 2019, at 5:27 PM, Alex Coleman wrote: My apologies for the repetition, as I know this, or a very similar issue, was discussed recently. However, I cannot readily locate the posts. I was working on a project 2 days ago, and everything was fine. However, when I open the same project today and attempt to use the double-tap flowtools inspector functions to do things like arm a track, turn on the metronome, enter a start location, etc., but the commands do not work. I've tried using option and page-up/down to make sure the tracks were scrolled into view, and even reinstalled the flowtools 2018.7 macros, but with no success. Any suggestions on what my problem may be and how to promptly correct it would be so greatly appreciated. I'm kind of dead in the water at this point. I'm using the Element 46 as my interface, and protools 2018.10, I believe. Thanks again. AC -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Recommendations for Accessible Mastering Plugin
Hi, I use Waves L2 and it works great, though the installation of Waves plug-ins isn’t accessible with VO. Best, Niklas Skickat från min iPhone > 5 mars 2019 kl. 16:09 skrev Brian Casey : > > I’m a big fan of the massy l2007 limiter, the installer isn’t accessible but > the plugin plays great with voice over. > > Sent from my smart-ish phone! > >> On 5/03/2019, at 3:01 PM, Alex Coleman wrote: >> >> I'm wondering if anyone can recommend an accessible, high-quality >> plugin for mastering? >> When I was a Sonar user, I used Waves L2 and LinMB for limiting and >> multi-band compression. >> Now I need to find something that will work for me in Protools. >> Thanks for any suggestions or recommendations that you can provide. >> AC >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit >> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptoutdata=02%7C01%7C%7C4262d93c8c0c4b2e879508d6a17c8c19%7C84df9e7fe9f640afb435%7C1%7C0%7C636873953622153505sdata=m4T3KRDUas%2FeLaUjQfTUQfdbKMBCxHlPPbylCTEr0t4%3Dreserved=0. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit > https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgroups.google.com%2Fd%2Foptoutdata=02%7C01%7C%7C4262d93c8c0c4b2e879508d6a17c8c19%7C84df9e7fe9f640afb435%7C1%7C0%7C636873953622153505sdata=m4T3KRDUas%2FeLaUjQfTUQfdbKMBCxHlPPbylCTEr0t4%3Dreserved=0. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Urgent Question regarding FlowTools Inspector commands (Again)
Hey man. If you haven’t yet, try closing everything but Pro Tools, including turning off wifi. It’s worth a shot to at least rule out other processes conflicting. Also, did you try the beta version of Apogee Control? If you did, that could be a suspect as well. Hope it starts workin for ya again. Best, Mike Sent from my iPhone > On 4 Mar 2019, at 18:06, Alex Coleman wrote: > > Thanks Slau, however, I have closed PT and reopened several times, as > well as rebooted the computer a couple of times, with the same > results. > > >> On 3/4/19, Slau Halatyn wrote: >> First, you never have to reinstall Flo Tools. Just a heads up so you don't >> waste your time in the future. If you can't get double-tap commands to work, >> simply restart and that usually clears up any quirks with the system whether >> it's Flo Tools related or not. >> HTH, >> slau >> >> >>> On Mar 4, 2019, at 5:27 PM, Alex Coleman >>> wrote: >>> >>> My apologies for the repetition, as I know this, or a very similar >>> issue, was discussed recently. However, I cannot readily locate the >>> posts. >>> I was working on a project 2 days ago, and everything was fine. >>> However, when I open the same project today and attempt to use the >>> double-tap flowtools inspector functions to do things like arm a >>> track, turn on the metronome, enter a start location, etc., but the >>> commands do not work. >>> I've tried using option and page-up/down to make sure the tracks were >>> scrolled into view, and even reinstalled the flowtools 2018.7 macros, >>> but with no success. >>> Any suggestions on what my problem may be and how to promptly correct >>> it would be so greatly appreciated. >>> I'm kind of dead in the water at this point. >>> I'm using the Element 46 as my interface, and protools 2018.10, I >>> believe. >>> Thanks again. >>> AC >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: complete control getting started
Thanks Steve and Slau for a brief overview. That’s exactly what i was after for now. Steve > On 4 Mar 2019, at 1:55 am, Slau Halatyn wrote: > > Like a lot of things, it sort of depends on how much you want to put into it. > Komplete Kontrol offers an unparalleled level of access to virtual > instruments. It's a subject that is wide ranging in scope so I couldn't > possibly cover it here. There's a WhatsApp group, email list and Drop Box > associated with the community of blind KK users so there's a lot of support > there. Some people focus highly on KK and others use it as just another tool > in a larger shed. One can get into the environment with an investment of > anywhere from a few hundred dollars to a couple of thousand and then the > purchasing of third party libraries beyond that. It all depends on one's > needs. For blind users, it's the single most accessible portal into the > virtual instrument world. > HTH, > Slau > > >> On Mar 3, 2019, at 12:27 AM, Steve Sparrow wrote: >> >> Hi guys. I’m very seriously thinking about purchasing complete control. I >> know there has been a lot of talk about this on the list, but i’ve not >> really taken a lot of notice of exactly how things are done. How easy is >> this to run, can someone give me a brief idea of what the process is for >> using it. Do you just insert it over an instrument track as you would with X >> band? i assume theres more to it than that. How accessible is it. >> >> Steve >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: Recommendations for Accessible Mastering Plugin
I’m a big fan of the massy l2007 limiter, the installer isn’t accessible but the plugin plays great with voice over. Sent from my smart-ish phone! > On 5/03/2019, at 3:01 PM, Alex Coleman wrote: > > I'm wondering if anyone can recommend an accessible, high-quality > plugin for mastering? > When I was a Sonar user, I used Waves L2 and LinMB for limiting and > multi-band compression. > Now I need to find something that will work for me in Protools. > Thanks for any suggestions or recommendations that you can provide. > AC > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Recommendations for Accessible Mastering Plugin
I'm wondering if anyone can recommend an accessible, high-quality plugin for mastering? When I was a Sonar user, I used Waves L2 and LinMB for limiting and multi-band compression. Now I need to find something that will work for me in Protools. Thanks for any suggestions or recommendations that you can provide. AC -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
