RE: short cut question
Yeah. Thanks. Going to update at some stage. Steve -Original Message- From: ptaccess@googlegroups.com On Behalf Of Slau Halatyn Sent: Friday, October 27, 2023 1:46 AM To: PTAccess List Subject: Re: short cut question Hi steve, Yeah, that’s an old version of PT that predates the code that looks for specific names for buttons and such. These things can change over time and that’s probably what’s going on. Besides, the latest version of Flo Tools requires a minimum Pro Tools version beyond what you’re using. > On Oct 25, 2023, at 8:38 PM, Steve Sparrow wrote: > > I'm currently using protools, 19.5, and the latest version of flo tools. So > not sure if that would cause an issue. I think it did say when I installed > it, some things may not work correctly. I've not found anything that doesn't > work yet, But maybe that's one of then. > Anyway. Thanks > > > -Original Message- > From: ptaccess@googlegroups.com On Behalf > Of Slau Halatyn > Sent: Thursday, October 26, 2023 8:43 AM > To: PTAccess List > Subject: Re: short cut question > > It’s not a Pro Tools command but rather a Flo Tools command. I don’t remember > when we introduced it but it’s been around for a few years. > > >> On Oct 25, 2023, at 4:19 PM, Steve Sparrow wrote: >> >> Ok. I tried this, but it's not doing anything here. Bow ever I am using an >> older version of protools So maybe that is the issue. Is there anything else >> I need to turn on for this to work, Perhaps I should just update protools. >> Steve >> >> >> -Original Message- >> From: ptaccess@googlegroups.com On Behalf >> Of Slau Halatyn >> Sent: Thursday, October 26, 2023 12:53 AM >> To: PTAccess List >> Subject: Re: short cut question >> >> Hi Steve, >> >> I mean all the modifiers including Command, Option, Control and Shift >> together and then the letter key. >> >> Cheers, >> Slau >> >> >>> On Oct 25, 2023, at 8:25 AM, Steve Sparrow >>> wrote: >>> >>> Hey Slau. Thanks for this. Stupid question. What is all modifiers >>> key stroke. I assumed you meant the shift key. But I can't get that to wor >>> So what is the all modifiers command. >>> Stevek. >>> >>> -Original Message- >>> From: ptaccess@googlegroups.com On >>> Behalf Of Slau Halatyn >>> Sent: Wednesday, October 25, 2023 2:22 PM >>> To: PTAccess List >>> Subject: Re: short cut question >>> >>> Hi Steve, >>> >>> If you’re using Flo Tools, all modifiers plus R will render without you >>> having to leave the plug-in view area. All modifiers plus P will also >>> preview. >>> >>> HTH, >>> Slau >>> >>> On Oct 24, 2023, at 11:09 PM, Steve Sparrow wrote: Hey guys, can anyone tell me if there is a short cut to get to the render button when working in a pluggin in the audio sweet window. For example. If I want to auto tune something in this way, I have to get into the pluggin window, make my changes, then uninteract with the pluggin window, and go to the render button. But is there a way of rendering while still in the pluggin window. It works fine this way, but it would be a time saver if this was possible. It could also be I’m going about things the wrong way here. Maybe there is a better way. Steve -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516241E993871B4EA20555FE7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/03DF9D2F-3E47-4E63-B1CB-D283C48DA081%40gmail.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516895B5E9AC156E7BB8537E7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/7E800F8E-D73F-45A8-9C31-5BA66A414C0E%40gmail.com. >> >> -- >> You received this message
Re: short cut question
Hi steve, Yeah, that’s an old version of PT that predates the code that looks for specific names for buttons and such. These things can change over time and that’s probably what’s going on. Besides, the latest version of Flo Tools requires a minimum Pro Tools version beyond what you’re using. > On Oct 25, 2023, at 8:38 PM, Steve Sparrow wrote: > > I'm currently using protools, 19.5, and the latest version of flo tools. So > not sure if that would cause an issue. I think it did say when I installed > it, some things may not work correctly. I've not found anything that doesn't > work yet, But maybe that's one of then. > Anyway. Thanks > > > -Original Message- > From: ptaccess@googlegroups.com On Behalf Of Slau > Halatyn > Sent: Thursday, October 26, 2023 8:43 AM > To: PTAccess List > Subject: Re: short cut question > > It’s not a Pro Tools command but rather a Flo Tools command. I don’t remember > when we introduced it but it’s been around for a few years. > > >> On Oct 25, 2023, at 4:19 PM, Steve Sparrow wrote: >> >> Ok. I tried this, but it's not doing anything here. Bow ever I am using an >> older version of protools So maybe that is the issue. Is there anything else >> I need to turn on for this to work, Perhaps I should just update protools. >> Steve >> >> >> -Original Message- >> From: ptaccess@googlegroups.com On Behalf >> Of Slau Halatyn >> Sent: Thursday, October 26, 2023 12:53 AM >> To: PTAccess List >> Subject: Re: short cut question >> >> Hi Steve, >> >> I mean all the modifiers including Command, Option, Control and Shift >> together and then the letter key. >> >> Cheers, >> Slau >> >> >>> On Oct 25, 2023, at 8:25 AM, Steve Sparrow >>> wrote: >>> >>> Hey Slau. Thanks for this. Stupid question. What is all modifiers key >>> stroke. I assumed you meant the shift key. But I can't get that to wor So >>> what is the all modifiers command. >>> Stevek. >>> >>> -Original Message- >>> From: ptaccess@googlegroups.com On Behalf >>> Of Slau Halatyn >>> Sent: Wednesday, October 25, 2023 2:22 PM >>> To: PTAccess List >>> Subject: Re: short cut question >>> >>> Hi Steve, >>> >>> If you’re using Flo Tools, all modifiers plus R will render without you >>> having to leave the plug-in view area. All modifiers plus P will also >>> preview. >>> >>> HTH, >>> Slau >>> >>> On Oct 24, 2023, at 11:09 PM, Steve Sparrow wrote: Hey guys, can anyone tell me if there is a short cut to get to the render button when working in a pluggin in the audio sweet window. For example. If I want to auto tune something in this way, I have to get into the pluggin window, make my changes, then uninteract with the pluggin window, and go to the render button. But is there a way of rendering while still in the pluggin window. It works fine this way, but it would be a time saver if this was possible. It could also be I’m going about things the wrong way here. Maybe there is a better way. Steve -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516241E993871B4EA20555FE7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/03DF9D2F-3E47-4E63-B1CB-D283C48DA081%40gmail.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516895B5E9AC156E7BB8537E7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/7E800F8E-D73F-45A8-9C31-5BA66A414C0E%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this d
RE: short cut question
I'm currently using protools, 19.5, and the latest version of flo tools. So not sure if that would cause an issue. I think it did say when I installed it, some things may not work correctly. I've not found anything that doesn't work yet, But maybe that's one of then. Anyway. Thanks -Original Message- From: ptaccess@googlegroups.com On Behalf Of Slau Halatyn Sent: Thursday, October 26, 2023 8:43 AM To: PTAccess List Subject: Re: short cut question It’s not a Pro Tools command but rather a Flo Tools command. I don’t remember when we introduced it but it’s been around for a few years. > On Oct 25, 2023, at 4:19 PM, Steve Sparrow wrote: > > Ok. I tried this, but it's not doing anything here. Bow ever I am using an > older version of protools So maybe that is the issue. Is there anything else > I need to turn on for this to work, Perhaps I should just update protools. > Steve > > > -Original Message- > From: ptaccess@googlegroups.com On Behalf > Of Slau Halatyn > Sent: Thursday, October 26, 2023 12:53 AM > To: PTAccess List > Subject: Re: short cut question > > Hi Steve, > > I mean all the modifiers including Command, Option, Control and Shift > together and then the letter key. > > Cheers, > Slau > > >> On Oct 25, 2023, at 8:25 AM, Steve Sparrow wrote: >> >> Hey Slau. Thanks for this. Stupid question. What is all modifiers key >> stroke. I assumed you meant the shift key. But I can't get that to wor So >> what is the all modifiers command. >> Stevek. >> >> -Original Message- >> From: ptaccess@googlegroups.com On Behalf >> Of Slau Halatyn >> Sent: Wednesday, October 25, 2023 2:22 PM >> To: PTAccess List >> Subject: Re: short cut question >> >> Hi Steve, >> >> If you’re using Flo Tools, all modifiers plus R will render without you >> having to leave the plug-in view area. All modifiers plus P will also >> preview. >> >> HTH, >> Slau >> >> >>> On Oct 24, 2023, at 11:09 PM, Steve Sparrow >>> wrote: >>> >>> Hey guys, can anyone tell me if there is a short cut to get to the render >>> button when working in a pluggin in the audio sweet window. For example. If >>> I want to auto tune something in this way, I have to get into the pluggin >>> window, make my changes, then uninteract with the pluggin window, and go to >>> the render button. But is there a way of rendering while still in the >>> pluggin window. It works fine this way, but it would be a time saver if >>> this was possible. It could also be I’m going about things the wrong way >>> here. Maybe there is a better way. >>> Steve >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516241E993871B4EA20555FE7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/03DF9D2F-3E47-4E63-B1CB-D283C48DA081%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516895B5E9AC156E7BB8537E7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/7E800F8E-D73F-45A8-9C31-5BA66A414C0E%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/SY4P282MB15167383914356CE76A55873E7DEA%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/C920E137-80F3-4FBB-9BD
