Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Just created a new wiki page - http://pve.proxmox.com/wiki/Storage_Migration Its short as the usage is so easy and self-explaining, but fell free to improve. Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
>>Have you tested the migration from or to Sheepdog? Yes, it's works. I have tested from<-> to all storages plugins. - Mail original - De: "Frédéric Massot" À: pve-user@pve.proxmox.com Envoyé: Mardi 11 Juin 2013 13:05:01 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Le 10/06/2013 18:57, Michael Rasmussen a écrit : > On Mon, 10 Jun 2013 18:49:32 +0200 (CEST) > Fabrizio Cuseo wrote: > >> Yes, backup works fine. >> I will try to setup two different ceph storage or move from different kind >> of storage and i'll publish my results. >> > I have tried the following which all works: > local -> nfs > local -> lvm |...] > nexenta -> zfs > nexenta -> nexenta Have you tested the migration from or to Sheepdog? -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frede...@juliana-multimedia.com | | +33.(0)2.97.54.77.94 +33.(0)6.67.19.95.69 | ===Debian=GNU/Linux=== ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Le 10/06/2013 18:57, Michael Rasmussen a écrit : On Mon, 10 Jun 2013 18:49:32 +0200 (CEST) Fabrizio Cuseo wrote: Yes, backup works fine. I will try to setup two different ceph storage or move from different kind of storage and i'll publish my results. I have tried the following which all works: local -> nfs local -> lvm |...] nexenta -> zfs nexenta -> nexenta Have you tested the migration from or to Sheepdog? -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frede...@juliana-multimedia.com | | +33.(0)2.97.54.77.94 +33.(0)6.67.19.95.69 | ===Debian=GNU/Linux=== ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Hello Alexandre. I have found the problem. MooseFs needs a write back cache to work; if I use the default NO CACHE setting, the VM doesn't start. So, if a move a powered-on disk from ceph to moosefs (remember that moosefs is locally mounted on the proxmox host), the default "no cache" setting on the new disk causes the problem. So, having a cache setting on the destination disk can solve the issue. Thanks in advance, Fabrizio Cuseo - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Martedì, 11 giugno 2013 5:54:36 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration("qm move") no problem to read/write to the ceph storage ? (also notice that last pvetest update librbd, don't known if it's related) Do you have tried to stop/start the vm, and try again ? - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 19:16:57 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Yes; it hangs at the beginning. From moosefs to moosefs (both locally mounted) from qcow2 to qcow2 works fine.. Regards, Fabrizio - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 19:11:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") I just check your logs, it seem that the job mirroring doesn't start at all ? It's hanging at the beginning right ? ----- Mail original ----- De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 18:49:32 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Yes, backup works fine. I will try to setup two different ceph storage or move from different kind of storage and i'll publish my results. Thanks for now... Fabrizio - Messaggio originale ----- Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 18:39:29 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") >>create full clone of drive virtio0 (CephCluster:vm-103-disk-1) >>Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw >>size=21474836480 >>TASK ERROR: storage migration failed: mirroring error: mirroring job seem to >>have die. Maybe do you have bad sectors? at >>/usr/share/perl5/PVE/QemuServer.pm line 4690. Seem that the block mirror job have failed. It's possibly a bad sector on virtual disk on ceph. Does proxmox backup works fine for this ceph disk ? (It should also die if it's really a bad sector) - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 14:33:23 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
no problem to read/write to the ceph storage ? (also notice that last pvetest update librbd, don't known if it's related) Do you have tried to stop/start the vm, and try again ? - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 19:16:57 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Yes; it hangs at the beginning. From moosefs to moosefs (both locally mounted) from qcow2 to qcow2 works fine.. Regards, Fabrizio - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 19:11:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") I just check your logs, it seem that the job mirroring doesn't start at all ? It's hanging at the beginning right ? - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 18:49:32 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Yes, backup works fine. I will try to setup two different ceph storage or move from different kind of storage and i'll publish my results. Thanks for now... Fabrizio - Messaggio originale ----- Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 18:39:29 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") >>create full clone of drive virtio0 (CephCluster:vm-103-disk-1) >>Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw >>size=21474836480 >>TASK ERROR: storage migration failed: mirroring error: mirroring job seem to >>have die. Maybe do you have bad sectors? at >>/usr/share/perl5/PVE/QemuServer.pm line 4690. Seem that the block mirror job have failed. It's possibly a bad sector on virtual disk on ceph. Does proxmox backup works fine for this ceph disk ? (It should also die if it's really a bad sector) - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 14:33:23 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release No
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Yes; it hangs at the beginning. From moosefs to moosefs (both locally mounted) from qcow2 to qcow2 works fine.. Regards, Fabrizio - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 19:11:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration("qm move") I just check your logs, it seem that the job mirroring doesn't start at all ? It's hanging at the beginning right ? - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 18:49:32 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Yes, backup works fine. I will try to setup two different ceph storage or move from different kind of storage and i'll publish my results. Thanks for now... Fabrizio - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 18:39:29 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") >>create full clone of drive virtio0 (CephCluster:vm-103-disk-1) >>Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw >>size=21474836480 >>TASK ERROR: storage migration failed: mirroring error: mirroring job seem to >>have die. Maybe do you have bad sectors? at >>/usr/share/perl5/PVE/QemuServer.pm line 4690. Seem that the block mirror job have failed. It's possibly a bad sector on virtual disk on ceph. Does proxmox backup works fine for this ceph disk ? (It should also die if it's really a bad sector) ----- Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 14:33:23 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: t
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
I just check your logs, it seem that the job mirroring doesn't start at all ? It's hanging at the beginning right ? - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 18:49:32 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Yes, backup works fine. I will try to setup two different ceph storage or move from different kind of storage and i'll publish my results. Thanks for now... Fabrizio - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 18:39:29 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") >>create full clone of drive virtio0 (CephCluster:vm-103-disk-1) >>Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw >>size=21474836480 >>TASK ERROR: storage migration failed: mirroring error: mirroring job seem to >>have die. Maybe do you have bad sectors? at >>/usr/share/perl5/PVE/QemuServer.pm line 4690. Seem that the block mirror job have failed. It's possibly a bad sector on virtual disk on ceph. Does proxmox backup works fine for this ceph disk ? (It should also die if it's really a bad sector) - Mail original ----- De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 14:33:23 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. ----- Messaggio originale ----- Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move"
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
On Mon, 10 Jun 2013 18:49:32 +0200 (CEST) Fabrizio Cuseo wrote: > Yes, backup works fine. > I will try to setup two different ceph storage or move from different kind of > storage and i'll publish my results. > I have tried the following which all works: local -> nfs local -> lvm local -> zfs local -> nexenta nfs -> local nfs -> nfs nfs -> lvm nfs -> zfs nfs -> nexenta lvm -> local lvm -> nfs lvm -> lvm lvm -> zfs lvm -> nexenta zfs -> local zfs -> nfs zfs -> lvm zfs -> zfs zfs -> nexenta nexenta -> local nexenta -> nfs nexenta -> lvm nexenta -> zfs nexenta -> nexenta -- Hilsen/Regards Michael Rasmussen Get my public GnuPG keys: michael rasmussen cc http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD3C9A00E mir datanom net http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE501F51C mir miras org http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE3E80917 -- xtifr - beware of james when he's off his medication => signature.asc Description: PGP signature ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Yes, backup works fine. I will try to setup two different ceph storage or move from different kind of storage and i'll publish my results. Thanks for now... Fabrizio - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 18:39:29 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration("qm move") >>create full clone of drive virtio0 (CephCluster:vm-103-disk-1) >>Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw >>size=21474836480 >>TASK ERROR: storage migration failed: mirroring error: mirroring job seem to >>have die. Maybe do you have bad sectors? at >>/usr/share/perl5/PVE/QemuServer.pm line 4690. Seem that the block mirror job have failed. It's possibly a bad sector on virtual disk on ceph. Does proxmox backup works fine for this ceph disk ? (It should also die if it's really a bad sector) - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 14:33:23 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
>>create full clone of drive virtio0 (CephCluster:vm-103-disk-1) >>Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw >>size=21474836480 >>TASK ERROR: storage migration failed: mirroring error: mirroring job seem to >>have die. Maybe do you have bad sectors? at >>/usr/share/perl5/PVE/QemuServer.pm line 4690. Seem that the block mirror job have failed. It's possibly a bad sector on virtual disk on ceph. Does proxmox backup works fine for this ceph disk ? (It should also die if it's really a bad sector) - Mail original - De: "Fabrizio Cuseo" À: "Alexandre DERUMIER" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , "Martin Maurer" Envoyé: Lundi 10 Juin 2013 14:33:23 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original ----- De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio ----- Messaggio originale ----- Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user -- --- Fabrizio Cuseo - mailto:f.cu...@panservice.it Direzione Generale - Panservice InterNetWorking Servizi Professionali per Internet ed il Networking Panservice e' associata AIIP - RIPE Local Registry Phone: +39 0773 410020 -
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
>>So it's supports live storage migration? YES ! :) - Mail original - De: "Lex Rivera" À: pve-user@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 14:25:53 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") So it's supports live storage migration? On Mon, Jun 10, 2013, at 05:21 AM, Alexandre DERUMIER wrote: > Wiki is not yet updated, but > > From gui, you have a new "move disk" button, on your vm hardware tab. > (works offline or online) > > command line is : qm move_disk > > > - Mail original - > > De: "Fabrizio Cuseo" > À: "Martin Maurer" > Cc: "proxmoxve (pve-user@pve.proxmox.com)" , > pve-de...@pve.proxmox.com > Envoyé: Lundi 10 Juin 2013 12:38:08 > Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage > migration ("qm move") > > Hello Martin. > I have upgraded my test cluster; where can I find any doc regarding > storage migration ? > > Thanks in advance, Fabrizio > > > - Messaggio originale ----- > Da: "Martin Maurer" > A: "proxmoxve (pve-user@pve.proxmox.com)" , > pve-de...@pve.proxmox.com > Inviato: Lunedì, 10 giugno 2013 10:33:15 > Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage > migration ("qm move") > > Hi all, > > We just uploaded a bunch of packages to our pvetest repository > (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of > bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new > feature - storage migration ("qm move"). > > A big Thank-you to our active community for all feedback, testing, bug > reporting and patch submissions. > > Release Notes > > - ceph (0.61.3-1~bpo70+1) > *update of ceph-common, librbd1 and librados2 > > - libpve-storage-perl (3.0-8) > * rdb: --format is deprecated, use --image-format instead > * be more verebose on rbd commands to get progress > * various fixes for nexenta plugin > > - vncterm (1.1-4) > * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem > (users previously used apache option SSLCertificateChainFile for that) > > - pve-qemu-kvm (1.4-13) > * update to qemu 1.4.2 > * remove rbd-add-an-asynchronous-flush.patch (upstream now) > > - qemu-server (3.0-20) > * new API to update VM config: this one is fully asynchronous. > * snapshot rollback: use pc-i440fx-1.4 as default > * config: implement new 'machine' configuration > * migrate: pass --machine parameter to remote 'qm start' command > * snapshot: store/use 'machine' confifiguration > * imlement delete flag for move_disk > * API: rename move to move_disk > * implement storage migration ("qm move") > * fix bug 395: correctly handle unused disk with storage alias > * fix unused disk handling (do not hide unused disks when used with > snapshot). > > - pve-manager (3.0-23) > * fix bug #368: use vtype 'DnsName' to verify host names > * fix bug #401: disable connection timeout during API call processing > * add suport for new qemu-server async configuration API > * support 'delete' flag for 'Move disk' > * add 'Move disk' button for storage migration > > Best Regards, > > Martin Maurer > > mar...@proxmox.com > http://www.proxmox.com > > ___ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > -- > --- > Fabrizio Cuseo - mailto:f.cu...@panservice.it > Direzione Generale - Panservice InterNetWorking > Servizi Professionali per Internet ed il Networking > Panservice e' associata AIIP - RIPE Local Registry > Phone: +39 0773 410020 - Fax: +39 0773 470219 > http://www.panservice.it mailto:i...@panservice.it > Numero verde nazionale: 800 901492 > ___ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > ___ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Hello. I am trying to move from a ceph disk to a local shared (moosefs) disk: this is the error I see. Regards, Fabrizio create full clone of drive virtio0 (CephCluster:vm-103-disk-1) Formatting '/mnt/mfscluster2/images/103/vm-103-disk-1.raw', fmt=raw size=21474836480 TASK ERROR: storage migration failed: mirroring error: mirroring job seem to have die. Maybe do you have bad sectors? at /usr/share/perl5/PVE/QemuServer.pm line 4690. - Messaggio originale - Da: "Alexandre DERUMIER" A: "Fabrizio Cuseo" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com, "Martin Maurer" Inviato: Lunedì, 10 giugno 2013 14:21:13 Oggetto: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration("qm move") Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user -- --- Fabrizio Cuseo - mailto:f.cu...@panservice.it Direzione Generale - Panservice InterNetWorking Servizi Professionali per Internet ed il Networking Panservice e' associata AIIP - RIPE Local Registry Phone: +39 0773 410020 - Fax: +39 0773 470219 http://www.panservice.it mailto:i...@panservice.it Numero verde nazionale: 800 901492 ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user -- --- Fabrizio Cuseo - mailto:f.cu...@panservice.it Direzione Generale - Panservice InterNetWorking Servizi Professionali per Internet ed il Networking Panservice e' associata AIIP - RIPE Local Registry Phone: +39 0773 410020 - Fax: +39 0773 470219 http://www.panservice.it mailto:i...@panservice.it Numero verde nazionale: 800 901492 ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
So it's supports live storage migration? On Mon, Jun 10, 2013, at 05:21 AM, Alexandre DERUMIER wrote: > Wiki is not yet updated, but > > From gui, you have a new "move disk" button, on your vm hardware tab. > (works offline or online) > > command line is : qm move_disk > > > - Mail original - > > De: "Fabrizio Cuseo" > À: "Martin Maurer" > Cc: "proxmoxve (pve-user@pve.proxmox.com)" , > pve-de...@pve.proxmox.com > Envoyé: Lundi 10 Juin 2013 12:38:08 > Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage > migration ("qm move") > > Hello Martin. > I have upgraded my test cluster; where can I find any doc regarding > storage migration ? > > Thanks in advance, Fabrizio > > > - Messaggio originale - > Da: "Martin Maurer" > A: "proxmoxve (pve-user@pve.proxmox.com)" , > pve-de...@pve.proxmox.com > Inviato: Lunedì, 10 giugno 2013 10:33:15 > Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage > migration ("qm move") > > Hi all, > > We just uploaded a bunch of packages to our pvetest repository > (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of > bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new > feature - storage migration ("qm move"). > > A big Thank-you to our active community for all feedback, testing, bug > reporting and patch submissions. > > Release Notes > > - ceph (0.61.3-1~bpo70+1) > *update of ceph-common, librbd1 and librados2 > > - libpve-storage-perl (3.0-8) > * rdb: --format is deprecated, use --image-format instead > * be more verebose on rbd commands to get progress > * various fixes for nexenta plugin > > - vncterm (1.1-4) > * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem > (users previously used apache option SSLCertificateChainFile for that) > > - pve-qemu-kvm (1.4-13) > * update to qemu 1.4.2 > * remove rbd-add-an-asynchronous-flush.patch (upstream now) > > - qemu-server (3.0-20) > * new API to update VM config: this one is fully asynchronous. > * snapshot rollback: use pc-i440fx-1.4 as default > * config: implement new 'machine' configuration > * migrate: pass --machine parameter to remote 'qm start' command > * snapshot: store/use 'machine' confifiguration > * imlement delete flag for move_disk > * API: rename move to move_disk > * implement storage migration ("qm move") > * fix bug 395: correctly handle unused disk with storage alias > * fix unused disk handling (do not hide unused disks when used with > snapshot). > > - pve-manager (3.0-23) > * fix bug #368: use vtype 'DnsName' to verify host names > * fix bug #401: disable connection timeout during API call processing > * add suport for new qemu-server async configuration API > * support 'delete' flag for 'Move disk' > * add 'Move disk' button for storage migration > > Best Regards, > > Martin Maurer > > mar...@proxmox.com > http://www.proxmox.com > > ___ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > -- > --- > Fabrizio Cuseo - mailto:f.cu...@panservice.it > Direzione Generale - Panservice InterNetWorking > Servizi Professionali per Internet ed il Networking > Panservice e' associata AIIP - RIPE Local Registry > Phone: +39 0773 410020 - Fax: +39 0773 470219 > http://www.panservice.it mailto:i...@panservice.it > Numero verde nazionale: 800 901492 > ___ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > ___ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Wiki is not yet updated, but From gui, you have a new "move disk" button, on your vm hardware tab. (works offline or online) command line is : qm move_disk - Mail original - De: "Fabrizio Cuseo" À: "Martin Maurer" Cc: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Envoyé: Lundi 10 Juin 2013 12:38:08 Objet: Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user -- --- Fabrizio Cuseo - mailto:f.cu...@panservice.it Direzione Generale - Panservice InterNetWorking Servizi Professionali per Internet ed il Networking Panservice e' associata AIIP - RIPE Local Registry Phone: +39 0773 410020 - Fax: +39 0773 470219 http://www.panservice.it mailto:i...@panservice.it Numero verde nazionale: 800 901492 ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Hello Martin. I have upgraded my test cluster; where can I find any doc regarding storage migration ? Thanks in advance, Fabrizio - Messaggio originale - Da: "Martin Maurer" A: "proxmoxve (pve-user@pve.proxmox.com)" , pve-de...@pve.proxmox.com Inviato: Lunedì, 10 giugno 2013 10:33:15 Oggetto: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user -- --- Fabrizio Cuseo - mailto:f.cu...@panservice.it Direzione Generale - Panservice InterNetWorking Servizi Professionali per Internet ed il Networking Panservice e' associata AIIP - RIPE Local Registry Phone: +39 0773 410020 - Fax: +39 0773 470219 http://www.panservice.it mailto:i...@panservice.it Numero verde nazionale: 800 901492 ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Re: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Where can I read more about what the nexenta plugin does in PVE? -Original Message- From: pve-user-boun...@pve.proxmox.com [mailto:pve-user-boun...@pve.proxmox.com] On Behalf Of Martin Maurer Sent: Monday, June 10, 2013 4:33 AM To: proxmoxve (pve-user@pve.proxmox.com); pve-de...@pve.proxmox.com Subject: [PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move") Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
[PVE-User] Updates for Proxmox VE 3.0 - including storage migration ("qm move")
Hi all, We just uploaded a bunch of packages to our pvetest repository (http://pve.proxmox.com/wiki/Package_repositories) , including a lot of bug fixes, code cleanups, qemu 1.4.2 and also a new quite cool new feature - storage migration ("qm move"). A big Thank-you to our active community for all feedback, testing, bug reporting and patch submissions. Release Notes - ceph (0.61.3-1~bpo70+1) *update of ceph-common, librbd1 and librados2 - libpve-storage-perl (3.0-8) * rdb: --format is deprecated, use --image-format instead * be more verebose on rbd commands to get progress * various fixes for nexenta plugin - vncterm (1.1-4) * Allow to add intermediate certificates to /etc/pve/local/pve-ssl.pem (users previously used apache option SSLCertificateChainFile for that) - pve-qemu-kvm (1.4-13) * update to qemu 1.4.2 * remove rbd-add-an-asynchronous-flush.patch (upstream now) - qemu-server (3.0-20) * new API to update VM config: this one is fully asynchronous. * snapshot rollback: use pc-i440fx-1.4 as default * config: implement new 'machine' configuration * migrate: pass --machine parameter to remote 'qm start' command * snapshot: store/use 'machine' confifiguration * imlement delete flag for move_disk * API: rename move to move_disk * implement storage migration ("qm move") * fix bug 395: correctly handle unused disk with storage alias * fix unused disk handling (do not hide unused disks when used with snapshot). - pve-manager (3.0-23) * fix bug #368: use vtype 'DnsName' to verify host names * fix bug #401: disable connection timeout during API call processing * add suport for new qemu-server async configuration API * support 'delete' flag for 'Move disk' * add 'Move disk' button for storage migration Best Regards, Martin Maurer mar...@proxmox.com http://www.proxmox.com ___ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user