Re: [PVE-User] VM Won't start

2016-04-01 Thread Luis G. Coralle 
I have same problem. I will try this!

2016-01-14 8:58 GMT-03:00 Gilberto Nunes :

> Wow! That's work as a charm!!!
>
> Thank you so much!
>
> 2016-01-13 19:39 GMT-02:00 Lindsay Mathieson 
> :
>
>> On 14/01/2016 1:53 AM, Gilberto Nunes wrote:
>>
>>> I just set a VM like any other one here in Proxmox 4.1 with more than 16
>>> VM's running smootlhy
>>>
>>> However, one of them (always has The Rebel!), refused to go up.
>>> I get this error:
>>>
>>> Failed to create message: Input/output error
>>>
>>
>>
>> Hi Gilberto, I ran into this one yesterday and found this solution on the
>> forums:
>>
>>
>> https://forum.proxmox.com/threads/cannot-start-kvm.25085/page-2#post-126837
>>
>> systemctl stop 126.scope
>> qm start 126
>>
>> Where 126 is the VMID
>>
>> It worked for me.
>>
>>
>> --
>> Lindsay Mathieson
>>
>>
>> ___
>> pve-user mailing list
>> pve-user@pve.proxmox.com
>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>
>
>
> --
>
> Gilberto Ferreira
> +55 (47) 9676-7530
> Skype: gilberto.nunes36
>
>
> ___
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>


-- 
Luis G. Coralle
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-14 Thread Gilberto Nunes 
Wow! That's work as a charm!!!

Thank you so much!

2016-01-13 19:39 GMT-02:00 Lindsay Mathieson :

> On 14/01/2016 1:53 AM, Gilberto Nunes wrote:
>
>> I just set a VM like any other one here in Proxmox 4.1 with more than 16
>> VM's running smootlhy
>>
>> However, one of them (always has The Rebel!), refused to go up.
>> I get this error:
>>
>> Failed to create message: Input/output error
>>
>
>
> Hi Gilberto, I ran into this one yesterday and found this solution on the
> forums:
>
> https://forum.proxmox.com/threads/cannot-start-kvm.25085/page-2#post-126837
>
> systemctl stop 126.scope
> qm start 126
>
> Where 126 is the VMID
>
> It worked for me.
>
>
> --
> Lindsay Mathieson
>
>
> ___
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>



-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Gilberto Nunes 
Hello Lindsay

That's nice... I will try it It's will avoid mess up my uptime
machine... hehehe

Thanks

2016-01-13 19:39 GMT-02:00 Lindsay Mathieson :

> On 14/01/2016 1:53 AM, Gilberto Nunes wrote:
>
>> I just set a VM like any other one here in Proxmox 4.1 with more than 16
>> VM's running smootlhy
>>
>> However, one of them (always has The Rebel!), refused to go up.
>> I get this error:
>>
>> Failed to create message: Input/output error
>>
>
>
> Hi Gilberto, I ran into this one yesterday and found this solution on the
> forums:
>
> https://forum.proxmox.com/threads/cannot-start-kvm.25085/page-2#post-126837
>
> systemctl stop 126.scope
> qm start 126
>
> Where 126 is the VMID
>
> It worked for me.
>
>
> --
> Lindsay Mathieson
>
>
> ___
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>



-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Lindsay Mathieson 

On 14/01/2016 1:53 AM, Gilberto Nunes wrote:
I just set a VM like any other one here in Proxmox 4.1 with more than 
16 VM's running smootlhy


However, one of them (always has The Rebel!), refused to go up.
I get this error:

Failed to create message: Input/output error



Hi Gilberto, I ran into this one yesterday and found this solution on 
the forums:


https://forum.proxmox.com/threads/cannot-start-kvm.25085/page-2#post-126837

systemctl stop 126.scope
qm start 126

Where 126 is the VMID

It worked for me.


--
Lindsay Mathieson

___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Gilberto Nunes 
Not at all!
Still get I/O error...
Funny, because there's nothing indicate any disk I/O failure...
Dmesg, show me nothing.
syslog show me nothing
I will try performe a apt-get dist-upgrade and restart the entire server,
tonight.. ( and screw my pretty 46 days uptime... :/ )

Tomorrow will see it...

Or, if somebody else has better idea, I'll appreciated...

Thanks


2016-01-13 15:19 GMT-02:00 Thomas Lamprecht :

> Did you tried a recreation of the VM? Even if that helps it would be
> strange.
> Also you can try to run the command from this VM manually, maybe you have
> better luck and get a specific error.
> Get the command with
> # qm showcmd 108
> then simply execute the output from the command above in a shell as root.
>
> On 13.01.2016 17:24, Gilberto Nunes wrote:
>
> Well... Ok... Here we go
> More info below:
>
> Server: HP Proliant with 64 Intel(R) Xeon(R) CPU X7560  @ 2.27GHz ( 4
> sockets)
> 256 GB memory
> SAS local storage with 3.2 TB
>
> I haved others VM's with the same behaviors.
> When I started the VM creation setting the configuration like CPU type to
> Nehalem or even host, and set memory disck and so, created normally.
> But, when I point the virtual CD/DVD to an ISO image, I get that message...
> There is no special requirement to this VM... ISO is Centos 7 x64.
> VM config:
>
> bootdisk: virtio0
> cores: 1
> cpu: Nehalem
> ide2: none,media=cdrom
> memory: 4096
> name: LcomBPMAppServer
> net0: virtio=36:64:65:38:64:63,bridge=vmbr0
> numa: 0
> ostype: l26
> smbios1: uuid=deb5b877-25ae-42db-913a-77815c88cc20
> sockets: 1
> virtio0: stg-local:108/vm-108-disk-1.qcow2,size=120G
>
>
> looks good
>
>
>
> Thanks
>
>
> 2016-01-13 14:14 GMT-02:00 Thomas Lamprecht :
>
>> Hi,
>>
>> I didn't looked at the entire command if there is an
>> error/misconfiguration, to tiresome for me.
>>
>> Can you please also post the VMs config file and maybe some additional
>> info you have: is this VM special in any sense? did the VM never work
>> (since creation) or stopped working?
>>
>> Further, is more information in the log? Please look in the journal at
>> the time from a failed start. (journalctl)
>> That info should make it easier to track down the problem and help you.
>>
>> cheers,
>> Thomas
>>
>>
>> On 13.01.2016 16:53, Gilberto Nunes wrote:
>>
>> Hello list
>>
>> I just set a VM like any other one here in Proxmox 4.1 with more than 16
>> VM's running smootlhy
>>
>> However, one of them (always has The Rebel!), refused to go up.
>> I get this error:
>>
>> Failed to create message: Input/output error
>>
>> TASK ERROR: start failed: command '/usr/bin/systemd-run --scope --slice
>> qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000' /usr/bin/kvm -id 108
>> -chardev 'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait'
>> -mon 'chardev=qmp,mode=control' -vnc
>> unix:/var/run/qemu-server/108.vnc,x509,password -pidfile
>> /var/run/qemu-server/108.pid -daemonize -smbios
>> 'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name LcomBPMAppServer
>> -smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults -boot
>> 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu
>> Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br -device
>> 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device
>> 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device
>> 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device
>> 'usb-tablet,id=tablet,bus=uhci.0,port=1' -device
>> 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi
>> 'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive
>> 'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on'
>> -device
>> 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100'
>> -drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device
>> 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -netdev
>> 'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
>> -device
>> 'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300''
>> failed: exit code 1
>>
>>
>> Somebody  can help me with any assistance???
>>
>> Thanks a lot
>>
>> --
>>
>> Gilberto Ferreira
>> +55 (47) 9676-7530 <%2B55%20%2847%29%209676-7530>
>> Skype: gilberto.nunes36
>>
>>
>>
>> ___
>> pve-user mailing 
>> listpve-user@pve.proxmox.comhttp://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>>
>>
>> ___
>> pve-user mailing list
>> pve-user@pve.proxmox.com
>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>>
>>
>
>
> --
>
> Gilberto Ferreira
> +55 (47) 9676-7530
> Skype: gilberto.nunes36
>
>
>
> ___
> pve-user mailing 
> listpve-user@pve.proxmox.comhttp://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
>
> _

Re: [PVE-User] VM Won't start

2016-01-13 Thread Thomas Lamprecht 
Did you tried a recreation of the VM? Even if that helps it would be 
strange.
Also you can try to run the command from this VM manually, maybe you 
have better luck and get a specific error.

Get the command with
# qm showcmd 108
then simply execute the output from the command above in a shell as root.

On 13.01.2016 17:24, Gilberto Nunes wrote:

Well... Ok... Here we go
More info below:

Server: HP Proliant with 64 Intel(R) Xeon(R) CPU X7560  @ 2.27GHz ( 4 
sockets)

256 GB memory
SAS local storage with 3.2 TB

I haved others VM's with the same behaviors.
When I started the VM creation setting the configuration like CPU type 
to Nehalem or even host, and set memory disck and so, created normally.
But, when I point the virtual CD/DVD to an ISO image, I get that 
message...

There is no special requirement to this VM... ISO is Centos 7 x64.
VM config:

bootdisk: virtio0
cores: 1
cpu: Nehalem
ide2: none,media=cdrom
memory: 4096
name: LcomBPMAppServer
net0: virtio=36:64:65:38:64:63,bridge=vmbr0
numa: 0
ostype: l26
smbios1: uuid=deb5b877-25ae-42db-913a-77815c88cc20
sockets: 1
virtio0: stg-local:108/vm-108-disk-1.qcow2,size=120G


looks good



Thanks


2016-01-13 14:14 GMT-02:00 Thomas Lamprecht >:


Hi,

I didn't looked at the entire command if there is an
error/misconfiguration, to tiresome for me.

Can you please also post the VMs config file and maybe some
additional info you have: is this VM special in any sense? did the
VM never work (since creation) or stopped working?

Further, is more information in the log? Please look in the
journal at the time from a failed start. (journalctl)
That info should make it easier to track down the problem and help
you.

cheers,
Thomas


On 13.01.2016 16:53, Gilberto Nunes wrote:

Hello list

I just set a VM like any other one here in Proxmox 4.1 with more
than 16 VM's running smootlhy

However, one of them (always has The Rebel!), refused to go up.
I get this error:

Failed to create message: Input/output error

TASK ERROR: start failed: command '/usr/bin/systemd-run --scope
--slice qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000'
/usr/bin/kvm -id 108 -chardev
'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait'
-mon 'chardev=qmp,mode=control' -vnc
unix:/var/run/qemu-server/108.vnc,x509,password -pidfile
/var/run/qemu-server/108.pid -daemonize -smbios
'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name
LcomBPMAppServer -smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults
-boot 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu
Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br
-device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f'
-device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e'
-device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device
'usb-tablet,id=tablet,bus=uhci.0,port=1' -device
'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi
'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive

'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on'
-device

'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100'
-drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device
'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200'
-netdev

'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
-device

'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300''
failed: exit code 1


Somebody  can help me with any assistance???

Thanks a lot

-- 


Gilberto Ferreira
+55 (47) 9676-7530 
Skype: gilberto.nunes36



___
pve-user mailing list
pve-user@pve.proxmox.com 
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user



___
pve-user mailing list
pve-user@pve.proxmox.com 
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user




--

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36



___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user


___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Gilberto Nunes 
Gerard: Even with default doesn't work...

Hector: I absolutely have no clue why this iscsi setting like this, since I
don't have such storage. Just local.

2016-01-13 14:50 GMT-02:00 Hector Suarez Planas 
:

> Greetings.
>
> I already set to none in CD configuration. No luck!
>>
>
> Gilberto, Do you review the storage for this VM?
>
> I saw this on your error:
>
> -iscsi 'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive
> 'file=/storage/images/108/vm-108-disk-1.qcow2
>
> :-|
>
> --
> =
> Lic. Hector Suarez Planas
> Administrador Nodo CODESA
> Santiago de Cuba
> -
> Blog: http://nihilanthlnxc.cubava.cu/
> ICQ ID: 681729738
> Conferendo ID: hspcuba
> =
>
>
> ___
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>



-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Hector Suarez Planas 

Greetings.


I already set to none in CD configuration. No luck!


Gilberto, Do you review the storage for this VM?

I saw this on your error:

-iscsi 'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive 
'file=/storage/images/108/vm-108-disk-1.qcow2


:-|

--
=
Lic. Hector Suarez Planas
Administrador Nodo CODESA
Santiago de Cuba
-
Blog: http://nihilanthlnxc.cubava.cu/
ICQ ID: 681729738
Conferendo ID: hspcuba
=

___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Gerald Brandt 

Are all your other VM's using Nehalem? Did you try kvm64 for CPU type?

Gerald


On 2016-01-13 10:44 AM, Gilberto Nunes wrote:

I already set to none in CD configuration. No luck!

2016-01-13 14:48 GMT-02:00 Angel Docampo >:


On 13/01/16 17:24, Gilberto Nunes wrote:


But, when I point the virtual CD/DVD to an ISO image, I get that
message...
There is no special requirement to this VM... ISO is Centos 7 x64.
VM config:




Can it start without CD?
-- 



*Angel Docampo
*
*Datalab Tecnologia, s.a.*
Castillejos, 352 - 08025 Barcelona
Tel. 93 476 69 14 - Ext: 114
Mob. 670.299.381


___
pve-user mailing list
pve-user@pve.proxmox.com 
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user




--

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36



___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user


___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Gilberto Nunes 
I already set to none in CD configuration. No luck!

2016-01-13 14:48 GMT-02:00 Angel Docampo :

> On 13/01/16 17:24, Gilberto Nunes wrote:
>
>
> But, when I point the virtual CD/DVD to an ISO image, I get that message...
> There is no special requirement to this VM... ISO is Centos 7 x64.
> VM config:
>
>
>
> Can it start without CD?
> --
>
>
> *Angel Docampo *
> *Datalab Tecnologia, s.a.*
> Castillejos, 352 - 08025 Barcelona
> Tel. 93 476 69 14 - Ext: 114
> Mob. 670.299.381
>
> ___
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>


-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Angel Docampo 

On 13/01/16 17:24, Gilberto Nunes wrote:


But, when I point the virtual CD/DVD to an ISO image, I get that 
message...

There is no special requirement to this VM... ISO is Centos 7 x64.
VM config:




Can it start without CD?
--


*Angel Docampo
*
*Datalab Tecnologia, s.a.*
Castillejos, 352 - 08025 Barcelona
Tel. 93 476 69 14 - Ext: 114
Mob. 670.299.381

___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Gilberto Nunes 
Well... Ok... Here we go
More info below:

Server: HP Proliant with 64 Intel(R) Xeon(R) CPU X7560  @ 2.27GHz ( 4
sockets)
256 GB memory
SAS local storage with 3.2 TB

I haved others VM's with the same behaviors.
When I started the VM creation setting the configuration like CPU type to
Nehalem or even host, and set memory disck and so, created normally.
But, when I point the virtual CD/DVD to an ISO image, I get that message...
There is no special requirement to this VM... ISO is Centos 7 x64.
VM config:

bootdisk: virtio0
cores: 1
cpu: Nehalem
ide2: none,media=cdrom
memory: 4096
name: LcomBPMAppServer
net0: virtio=36:64:65:38:64:63,bridge=vmbr0
numa: 0
ostype: l26
smbios1: uuid=deb5b877-25ae-42db-913a-77815c88cc20
sockets: 1
virtio0: stg-local:108/vm-108-disk-1.qcow2,size=120G

Thanks


2016-01-13 14:14 GMT-02:00 Thomas Lamprecht :

> Hi,
>
> I didn't looked at the entire command if there is an
> error/misconfiguration, to tiresome for me.
>
> Can you please also post the VMs config file and maybe some additional
> info you have: is this VM special in any sense? did the VM never work
> (since creation) or stopped working?
>
> Further, is more information in the log? Please look in the journal at the
> time from a failed start. (journalctl)
> That info should make it easier to track down the problem and help you.
>
> cheers,
> Thomas
>
>
> On 13.01.2016 16:53, Gilberto Nunes wrote:
>
> Hello list
>
> I just set a VM like any other one here in Proxmox 4.1 with more than 16
> VM's running smootlhy
>
> However, one of them (always has The Rebel!), refused to go up.
> I get this error:
>
> Failed to create message: Input/output error
>
> TASK ERROR: start failed: command '/usr/bin/systemd-run --scope --slice
> qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000' /usr/bin/kvm -id 108
> -chardev 'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait'
> -mon 'chardev=qmp,mode=control' -vnc
> unix:/var/run/qemu-server/108.vnc,x509,password -pidfile
> /var/run/qemu-server/108.pid -daemonize -smbios
> 'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name LcomBPMAppServer
> -smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults -boot
> 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu
> Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br -device
> 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device
> 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device
> 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device
> 'usb-tablet,id=tablet,bus=uhci.0,port=1' -device
> 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi
> 'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive
> 'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on'
> -device
> 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100'
> -drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device
> 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -netdev
> 'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
> -device
> 'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300''
> failed: exit code 1
>
>
> Somebody  can help me with any assistance???
>
> Thanks a lot
>
> --
>
> Gilberto Ferreira
> +55 (47) 9676-7530
> Skype: gilberto.nunes36
>
>
>
> ___
> pve-user mailing 
> listpve-user@pve.proxmox.comhttp://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>
>
> ___
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
>
>


-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Thomas Lamprecht 

Hi,

I didn't looked at the entire command if there is an 
error/misconfiguration, to tiresome for me.


Can you please also post the VMs config file and maybe some additional 
info you have: is this VM special in any sense? did the VM never work 
(since creation) or stopped working?


Further, is more information in the log? Please look in the journal at 
the time from a failed start. (journalctl)

That info should make it easier to track down the problem and help you.

cheers,
Thomas

On 13.01.2016 16:53, Gilberto Nunes wrote:

Hello list

I just set a VM like any other one here in Proxmox 4.1 with more than 
16 VM's running smootlhy


However, one of them (always has The Rebel!), refused to go up.
I get this error:

Failed to create message: Input/output error

TASK ERROR: start failed: command '/usr/bin/systemd-run --scope 
--slice qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000' 
/usr/bin/kvm -id 108 -chardev 
'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait' -mon 
'chardev=qmp,mode=control' -vnc 
unix:/var/run/qemu-server/108.vnc,x509,password -pidfile 
/var/run/qemu-server/108.pid -daemonize -smbios 
'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name 
LcomBPMAppServer -smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults 
-boot 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu 
Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br -device 
'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device 
'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device 
'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device 
'usb-tablet,id=tablet,bus=uhci.0,port=1' -device 
'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi 
'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive 
'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on' 
-device 
'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100' 
-drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device 
'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' 
-netdev 
'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on' 
-device 
'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'' 
failed: exit code 1



Somebody  can help me with any assistance???

Thanks a lot

--

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36



___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user


___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Re: [PVE-User] VM Won't start

2016-01-13 Thread Thomas Lamprecht 

Hi,

I didn't looked at the entire command if there is an 
error/misconfiguration, to tiresome for me.


Can you please also post the VMs config file and maybe some additional 
info you have: is this VM special in any sense? did the VM never work 
(since creation) or stopped working?


Further, is more information in the log? Please look in the journal at 
the time from a failed start. (journalctl)

That info should make it easier to track down the problem and help you.

cheers,
Thomas

On 13.01.2016 16:53, Gilberto Nunes wrote:

Hello list

I just set a VM like any other one here in Proxmox 4.1 with more than 
16 VM's running smootlhy


However, one of them (always has The Rebel!), refused to go up.
I get this error:

Failed to create message: Input/output error

TASK ERROR: start failed: command '/usr/bin/systemd-run --scope 
--slice qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000' 
/usr/bin/kvm -id 108 -chardev 
'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait' -mon 
'chardev=qmp,mode=control' -vnc 
unix:/var/run/qemu-server/108.vnc,x509,password -pidfile 
/var/run/qemu-server/108.pid -daemonize -smbios 
'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name 
LcomBPMAppServer -smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults 
-boot 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu 
Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br -device 
'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device 
'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device 
'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device 
'usb-tablet,id=tablet,bus=uhci.0,port=1' -device 
'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi 
'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive 
'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on' 
-device 
'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100' 
-drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device 
'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' 
-netdev 
'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on' 
-device 
'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300'' 
failed: exit code 1



Somebody  can help me with any assistance???

Thanks a lot

--

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36



___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user


___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

[PVE-User] VM Won't start

2016-01-13 Thread Gilberto Nunes 
Hello list

I just set a VM like any other one here in Proxmox 4.1 with more than 16
VM's running smootlhy

However, one of them (always has The Rebel!), refused to go up.
I get this error:

Failed to create message: Input/output error

TASK ERROR: start failed: command '/usr/bin/systemd-run --scope --slice
qemu --unit 108 -p 'KillMode=none' -p 'CPUShares=1000' /usr/bin/kvm -id 108
-chardev 'socket,id=qmp,path=/var/run/qemu-server/108.qmp,server,nowait'
-mon 'chardev=qmp,mode=control' -vnc
unix:/var/run/qemu-server/108.vnc,x509,password -pidfile
/var/run/qemu-server/108.pid -daemonize -smbios
'type=1,uuid=deb5b877-25ae-42db-913a-77815c88cc20' -name LcomBPMAppServer
-smp '1,sockets=1,cores=1,maxcpus=1' -nodefaults -boot
'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -cpu
Nehalem,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k pt-br -device
'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device
'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device
'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device
'usb-tablet,id=tablet,bus=uhci.0,port=1' -device
'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi
'initiator-name=iqn.1993-08.org.debian:01:9a3690d7aafb' -drive
'file=/storage/images/108/vm-108-disk-1.qcow2,if=none,id=drive-virtio0,format=qcow2,cache=none,aio=native,detect-zeroes=on'
-device
'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100'
-drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device
'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -netdev
'type=tap,id=net0,ifname=tap108i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on'
-device
'virtio-net-pci,mac=36:64:65:38:64:63,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300''
failed: exit code 1


Somebody  can help me with any assistance???

Thanks a lot

-- 

Gilberto Ferreira
+55 (47) 9676-7530
Skype: gilberto.nunes36
___
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user